Search

Abstract Corrective osteotomy allows to improve joint loading, pain and function. In complex deformities, the biggest challenge is to define the optimal surgical solution, while considering anatomical, technical and biomechanical factors. While the single-cut osteotomy (SCOT) and focal dome osteotomy (FDO) are well-established treatment options, their mathematical relationship remain largely unclear. The aim of the study was (1) to describe the close mathematical relationship between the SCOT and FDO and (2) to analyze and introduce a novel technique—the stepped FDO—as a modification of the classic FDO. The mathematical background and relationship of SCOT and FDO are described for the example of a femoral deformity correction and visualized using a 3D surface model taking into account the benefits for the clinical application. The novel modifications of the stepped FDO are introduced and its technical and clinical feasibility demonstrated. Both, SCOT and FDO, rely on the same deformity axis that defines the rotation axis k for a 3D deformity correction. To achieve the desired correction using a SCOT, the resulting cutting plane is perpendicular to k, while using a FDO will result in a cylindrical cut with a central axis parallel to k. The SCOT and FDO demonstrate a strong mathematical relation, as both methods rely on the same deformity axis, however, resulting in different cutting planes. These characteristics enable a complementary use when defining the optimal type of osteotomy. This understanding enables a more versatile planning approach when considering factors as the surgical approach, biomechanical characteristics of fixation or soft tissue conditions. The newly introduced stepped FDO facilitates an exact reduction of the bone fragments and potentially expands the clinical applicability of the FDO.

Background: The aim of this study was to compare the clinical and radiographic outcomes of treatment of symptomatic mal- and/or nonunion of midshaft clavicle fractures using radiographically based free-hand open reduction and internal fixation (ORIF) or computer-assisted 3D-planned, personalized corrective osteotomies performed using patient-specific instrumentation (PSI) and ORIF. The hypotheses were that (1) patients treated with computer-assisted planning and PSI would have a better clinical outcome, and (2) computer-assisted surgical planning would achieve a more accurate restoration of anatomy compared to the free-hand technique. Methods: Between 1998 and 2020, 13 patients underwent PSI, and 34 patients underwent free-hand ORIF and/or corrective osteotomy. After application of exclusion criteria, 12/13 and 11/34 patients were included in the study. The clinical examination included measurement of the active range of motion and assessment of the absolute and relative Constant–Murley Scores and the subjective shoulder value. Subjective satisfaction with the cosmetic result was assessed on a Likert scale from 0 to 100 (subjective aesthetic value). 11/13 and 6/11 patients underwent postoperative computed tomography evaluation of both clavicles. Computed tomography scans were segmented to generate 3D surface models. After projection onto the mirrored contralateral side, displacement analysis was performed. Finally, bony union was documented. The average follow-up time was 43 months in the PSI and 50 months in the free-hand cohort. Results: The clinical outcomes of both groups did not differ significantly. Median subjective shoulder value was 97.5% (70; 100) in the PSI group vs. 90% (0; 100) in the free-hand group; subjective aesthetic value was 86.4% (±10.7) vs. 75% (±18.7); aCS was 82.3 (±10.3) points vs. 74.9 (±26) points; and rCS was 86.7 (±11.3) points vs. 81.9 (±28.1) points. In the free-hand group, 2/11 patients had a postoperative neurological complication. In the PSI cohort, the 3D angle deviation was significantly smaller (PSI/planned vs. free-hand/contralateral: 10.8° (3.1; 23.8) vs. 17.4° (11.6; 42.4); P = .020)). There was also a trend toward a smaller 3D shift, which was not statistically significant (PSI/planned vs. free-hand/contralateral: 6 mm (3.4; 18.3) vs. 9.3 mm (5.1; 18.1); P = .342). There were no other significant differences. A bony union was achieved in all cases. Conclusion: Surgical treatment of nonunion and malunions of the clavicle was associated with very good clinical results and a 100% union rate. This study, albeit in a relatively small cohort with a follow-up of 4 years, could not document any clinically relevant advantage of 3D planning and personalized operative templating over conventional radiographic planning and free-hand surgical fixation performed by experienced surgeons.

Background: A rotator cuff tear (RCT) is a common shoulder diagnosis and its etiology may be acute, traumatic, or chronic degenerative. Differentiation between the 2 etiologies may be important for multiple reasons, but remains difficult based on imaging. Further knowledge about radiographic and magnetic resonance findings to distinguish traumatic from degenerative RCT is needed. Methods: We analyzed magnetic resonance arthrograms (MRAs) of 96 patients with traumatic or degenerative superior RCT, which were matched according their age and the affected rotator cuff muscle into the 2 groups. Patients older than 66 years of age were excluded from the study to avoid including cases with pre-existing degeneration. In the case of traumatic RCT, the time between the trauma and MRA had to be less than 3 months. Various parameters of the supraspinatus (SSP) muscle-tendon unit were assessed (tendon thickness, presence of a remaining tendon stump at the greater tubercle, magnitude of retraction, layer appearance). The retraction of the 2 SSP layers were individually measured to determine the difference of retraction. Additionally, edema of the tendon and muscle, the tangent- and kinking-sign as well as the newly introduced Cobra-sign (bulging of the distal part of the ruptured tendon with slim configuration of the medial part of the tendon) were analyzed. Results: Edema within the SSP muscle (sensitivity 13%, specificity 100%, P = .011) or the tendon (sensitivity 86%, specificity 36%, P = .014) are more frequent in traumatic RCT. The same association was found for the kinking-sign (sensitivity 53%, specificity 71%, P = .018) and the Cobra sign (sensitivity 47%, specificity 84%, P = .001). Even though not statistically significant, tendencies were observed toward thicker tendon stumps in traumatic RCT, and greater difference in retraction between the 2 SSP layers in the degenerative group. The cohorts had no difference in the presence of a tendon stump at the greater tuberosity. Conclusion: Muscle and tendon edema, as well as tendon kinking appearance and the newly introduced cobra-sign are suitable MRA parameters to distinguish between traumatic and degenerative etiology of a superior RTC.

Background: Shoulder magnetic resonance imaging (MRI) is commonly performed in patients with frozen shoulder (FS). However, the necessity of MRI and its diagnostic value is questionable. Therefore, the purpose of the present study was to clarify whether routine MRI could identify additional shoulder pathologies not previously suspected in the clinical examination and if any change in the treatment plan based on these additional MRI findings in FS patients was observed. Materials and methods: The medical records of all patients who presented in our outpatient clinic with a diagnosis of FS from January 2017 to December 2018 were retrospectively reviewed. Patient demographics, the number of patients who received a shoulder MRI, changes in the diagnosis or identification of structural shoulder pathologies following MRI examination (if performed), as well as any alternation in the initially suggested treatment plan were recorded. Results: A total of 609 patients (male: 241, female: 368) diagnosed with an FS and an average age of 52 ± 10 (range: 18 to 81) years were identified. In 403 of the 609 patients (66%), a shoulder MRI was performed. An additional structural shoulder pathology was identified in 89 of 403 (22%) patients following the shoulder MRI, mostly rotator cuff tears (partial: 46/403 [11.4%], full-thickness: 30/403 [7.4%], rerupture following reconstruction: 10/403 [2.5%]) and labrum tears (3/403 [0.7%]). At minimum 2-year follow-up, 11 of 403 (2.7%) patients were treated surgically for the additional pathology identified on the MRI scan consisting of an arthroscopic rotator cuff reconstruction in 10 patients and a labrum refixation in one patient. Five of the 609 (0.8%) patients were treated for refractory FS by arthroscopic capsulotomy. Conclusions: Although additional pathologies were identified in 22% of the patients, a change in treatment plan due to the MRI findings was only observed in 2.7% (37 MRIs needed to identify 1 patient with FS requiring surgery for the additional MRI findings). Therefore, routine use of shoulder MRI scans in patients with FS but without suspicion of an additional pathology may not be indicated.

Abstract Purpose Intraoperative hinge fractures in distal femur osteotomies represent a risk factor for loss of alignment and non‐union. Using finite element analysis, the goal of this study was to investigate the influence of different hinge widths and osteotomy corrections on hinge fractures in medial closed‐wedge and lateral open‐wedge distal femur osteotomies. Methods The hinge was located at the proximal margin of adductor tubercle for biplanar lateral open‐wedge and at the upper border of the lateral femoral condyle for biplanar medial closed‐wedge distal femur osteotomies, corresponding to optimal hinge positions described in literature. Different hinge widths (5, 7.5, 10 mm) were created and the osteotomy correction was opened/closed by 5, 7.5 and 10 mm. Tensile and compressive strain of the hinge was determined in a finite element analysis and compared to the ultimate strain of cortical bone to assess the hinge fracture risk. Results Doubling the correction from 5 to 10 mm increased mean tensile and compressive strain by 50% for lateral open‐wedge and 48% for medial closed‐wedge osteotomies. A hinge width of 10 mm versus 5 mm showed increased strain in the hinge region of 61% for lateral open‐wedge and 32% for medial closed‐wedge osteotomies. Medial closed‐wedge recorded a higher fracture risk compared to lateral open‐wedge osteotomies due to a larger hinge cross‐section area (60–67%) for all tested configurations. In case of a 5 mm hinge, medial closed‐wedge recorded 71% higher strain in the hinge region compared to lateral open‐wedge osteotomies. Conclusion Due to morphological features of the medial femoral condyle, finite element analysis suggests that lateral‐open wedge osteotomies are the preferable option if larger corrections are intended, as a thicker hinge can remain without an increased hinge fracture risk.

Abstract Purpose Functional internal rotation (IR) is a combination of extension and IR. It is clinically often limited after reverse total shoulder arthroplasty (RTSA) either due to loss of extension or IR in extension. It was the purpose of this study to determine the ideal in‐vitro combination of glenoid and humeral components to achieve impingement‐free functional IR. Methods RTSA components were virtually implanted into a normal scapula (previously established with a statistical shape model) and into a corresponding humerus using a computer planning program (CASPA). Baseline glenoid configuration consisted of a 28 mm baseplate placed flush with the posteroinferior glenoid rim, a baseplate inclination angle of 96° (relative to the supraspinatus fossa) and a 36 mm standard glenosphere. Baseline humeral configuration consisted of a 12 mm humeral stem, a metaphysis with a neck shaft angle (NSA) of 155° (+ 6 mm medial offset), anatomic torsion of ‐20° and a symmetric PE inlay (36mmx0mm). Additional configurations with different humeral torsion (‐20°, + 10°), NSA (135°, 145°, 155°), baseplate position, diameter, lateralization and inclination were tested. Glenohumeral extension of 5, 10, 20, and 40° was performed first, followed by IR of 20, 40, and 60° with the arm in extension of 40°—the value previously identified as necessary for satisfactory clinical functional IR. The different component combinations were taken through simulated ROM and the impingement volume (mm3) was recorded. Furthermore, the occurrence of impingement was read out in 5° motion increments. Results In all cases where impingement occurred, it occurred between the PE inlay and the posterior glenoid rim. Only in 11 of 36 combinations full functional IR was possible without impingement. Anterosuperior baseplate positioning showed the highest impingement volume with every combination of NSA and torsion. A posteroinferiorly positioned 26 mm baseplate resulting in an additional 2 mm of inferior overhang as well as 6 mm baseplate lateralization offered the best impingement‐free functional IR (5/6 combinations without impingement). Low impingement potential resulted from a combination of NSA 135° and + 10° torsion (4/6 combinations without impingement), followed by NSA 135° and ‐20° torsion (3/6 combinations without impingement) regardless of glenoid setup. Conclusion The largest impingement‐free functional IRs resulted from combining a posteroinferior baseplate position, a greater inferior glenosphere overhang, 90° of baseplate inclination angle, 6 mm glenosphere lateralization with respect to baseline setup, a lower NSA and antetorsion of the humeral component. Surgeons can employ and combine these implant configurations to achieve and improve functional IR when planning and performing RTSA. Level of evidence Basic Science Study, Biomechanics.

Abstract Background Computer-assisted three-dimensional (3D) planning is increasingly delegated to biomedical engineers. So far, the described fracture reduction approaches rely strongly on the performance of the users. The goal of our study was to analyze the influence of the two different professional backgrounds (technical and medical) and skill levels regarding the reliability of the proposed planning method. Finally, a new fragment displacement measurement method was introduced due to the lack of consistent methods in the literature. Methods 3D bone models of 20 distal radius fractures were presented to nine raters with different educational backgrounds (medical and technical) and various levels of experience in 3D operation planning (0 to 10 years) and clinical experience (1.5 to 24 years). Each rater was asked to perform the fracture reduction on 3D planning software. Results No difference was demonstrated in reduction accuracy regarding rotational (p = 1.000) and translational (p = 0.263) misalignment of the fragments between biomedical engineers and senior orthopedic residents. However, a significantly more accurate planning was performed in these two groups compared with junior orthopedic residents with less clinical experience and no 3D planning experience (p < 0.05). Conclusion Experience in 3D operation planning and clinical experience are relevant factors to plan an intra-articular fragment reduction of the distal radius. However, no difference was observed regarding the educational background (medical vs. technical) between biomedical engineers and senior orthopedic residents. Therefore, our results support the further development of computer-assisted surgery planning by biomedical engineers. Additionally, the introduced fragment displacement measure proves to be a feasible and reliable method. Level of Evidence Diagnostic Level II

Background: Magnetic resonance imaging (MRI) is commonly used for evaluation of ankle cartilage repair, yet its association with clinical outcome is controversial. This study analyzes the correlation between MRI and clinical outcome after cartilage repair of the talus including bone marrow stimulation, cell-based techniques, as well as restoration with allo- or autografting. Methods: A systematic search was performed in MEDLINE, Embase, and Cochrane Collaboration. Articles were screened for correlation of MRI and clinical outcome. Guidelines of Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA) were used. Chi-square test and regression analysis were performed to identify variables that determine correlation between clinical and radiologic outcome. Results: Of 2687 articles, a total of 43 studies (total 1212 cases) were included with a mean Coleman score of 57 (range, 33-70). Overall, 93% were case series, and 5% were retrospective and 2% prospective cohort studies. Associations between clinical outcome and ≥1 imaging variable were found in 21 studies (49%). Of 24 studies (56%) using the composite magnetic resonance observation of cartilage repair tissue (MOCART) score, 7 (29%) reported a correlation of the composite score with clinical outcome. Defect fill was associated with clinical outcome in 5 studies (12%), and 5 studies (50%) reported a correlation of T2 mapping and clinical outcome. Advanced age, shorter follow-up, and larger study size were associated with established correlation between clinical and radiographic outcome ( P = .021, P = .028, and P = .033). Conclusion: Interpreting MRI in prediction of clinical outcome in ankle cartilage repair remains challenging; however, it seems to hold some value in reflecting clinical outcome in patients with advanced age and/or at a shorter follow-up. Yet, further research is warranted to optimize postoperative MRI protocols and assessments allowing for a more comprehensive repair tissue evaluation, which eventually reflect clinical outcome in patients after cartilage repair of the ankle. Level of Evidence: Level III, systematic review and meta-analysis.