Search

New polystyrene (PS) foams with submicron pore sizes and open pore structure are introduced as potential cores for vacuum insulation panels (VIPs). Measurements of the thermal conductivity λ of the air-filled and evacuated PS foams, the influence of temperature T, opacifiers as well as gas pressure p on the thermal conductivity λ are presented. First results of the foam microstructures, as visualized by electron microscopy, confirm that pore sizes below 1 µm can be achieved. Thermal conductivity values of advanced samples in vacuum of about 7 mW/(m·K) were measured. [ABSTRACT FROM AUTHOR]

The thermal conductivity of powder fillings for load-bearing vacuum insulations is investigated. Different opacifiers have been tested in mixtures with perlite powder, precipitated silica, and fumed silica. Using temperature-dependent thermal conductivity measurements, the radiative thermal conductivity and the solid conductivity of the powder samples are separated. Additionally, the influence of the pressure load on the solid conductivity is studied. The thermal conductivities of silica powders with added opacifier powders (carbon black, magnetite, silicon carbide, titanium dioxide) can be as low as 0.003 W·m−1·K−1 if the powder boards are pressed with moderate loads. The use of microporous silica powders as filler materials allows internal gas pressures even beyond 10 hPa with only a moderate increase of the overall conductivity. [ABSTRACT FROM AUTHOR]

A method is described to determine quantitatively the infrared-optical properties of loose powder beds via directional-hemispherical transmission and reflection measurements. Instead of the integration of the powders into a potassium bromide (KBr) or a paraffin oil matrix, which would drastically alter the scattering behavior, the powders are placed onto supporting layers of polyethylene (PE) and KBr. A commercial spectrometer is supplemented by an external optics, which enables measurements on horizontally arranged samples. For data evaluation we use a solution of the equation of radiative transfer in the 3-flux approximation under boundary conditions adapted to the PE or KBr/powder system. A comparison with Kubelka-Munk's theory and Schuster's 2-flux approximation is performed, which shows that 3-flux approximation yields results closest to the exact solution. Equations are developed, which correct transmission and reflection of the samples for the influence of the supporting layer and calculate the specific extinction and the albedo of the powder and thus enables us to separate scattering and absorption part of the extinction spectrum. Measurements on TiO[sub 2] powder are presented, which show the influence of preparation techniques and data evaluation with different methods to obtain the albedo. The specific extinction of various TiO[sub 2] powders is presented. [ABSTRACT FROM AUTHOR]