Search

Osteoarthritis (OA) impacts hundreds of millions of people worldwide, with those affected incurring significant physical and financial burdens. Injuries such as focal defects to the articular surface are a major contributing risk factor for the development of OA. Current cartilage repair strategies are moderately effective at reducing pain but often replace damaged tissue with biomechanically inferior fibrocartilage. Here we describe the development, transcriptomic ontogenetic characterization and quality assessment at the single cell level, as well as the scaled manufacturing of an allogeneic human pluripotent stem cell-derived articular chondrocyte formulation that exhibits long-term functional repair of porcine articular cartilage. These results define a new potential clinical paradigm for articular cartilage repair and mitigation of the associated risk of OA.

Macrophages are the main cells involved in inflammatory processes and in the primary response to debris derived from wear of implanted CoCr alloys. The biocompatibility of wear particles from a high carbon CoCr alloy produced under polarization in hyaluronic acid (HA) aqueous solution was evaluated in J774A.1 mouse macrophages cultures. Polarization was applied to mimic the electrical interactions observed in living tissues. Wear tests were performed in a pin-on-disk tribometer integrating an electrochemical cell in phosphate buffer solution (PBS) and in PBS supplemented with 3 g/L HA, an average concentration that is generally found in synovial fluid, used as lubricant solution. Wear particles produced in 3 g/L HA solution showed a higher biocompatibility in J774A.1 macrophages in comparison to those elicited by particles obtained in PBS. A considerable enhancement in macrophages biocompatibility in the presence of 3 g/L of HA was further observed by the application of polarization at potentials having current densities typical of injured tissues suggesting that polarization produces an effect on the surface of the metallic material that leads to the production of wear particles that seem to be macrophage-biocompatible and less cytotoxic. The results showed the convenience of considering the influence of the electric interactions in the chemical composition of debris detached from metallic surfaces under wear corrosion to get a better understanding of the biological effects caused by the wear products.

The incidence of infections related to cardiac devices (such as permanent pacemakers) has been increasing out of proportion to implantation rates. As management of device infections typically requires explantation of the device, optimal prophylactic strategies are needed. Cefazolin and vancomycin are widely used as single agents for surgical prophylaxis against cardiac device-related infections. However, combination antibiotic prophylaxis may further reduce infectious complications. To model a localized subcutaneous implant-related infection, a bioluminescent strain of Staphylococcus epidermidis was inoculated onto a medical-procedure-grade titanium disc, which was placed into a subcutaneous pocket in the backs of mice. In vivo bioluminescence imaging, quantification of ex vivo CFU from the capsules and implants, variable-pressure scanning electron microscopy (VP-SEM), and neutrophil enhanced green fluorescent protein (EGFP) fluorescence in LysEGFP mice were employed to monitor the infection. This model was used to evaluate the efficacies of low- and high-dose cefazolin (50 and 200 mg/kg of body weight) and vancomycin (10 and 110 mg/kg) intravenous prophylaxis with or without rifampin (25 mg/kg). High-dose cefazolin and high-dose vancomycin treatment resulted in almost complete bacterial clearance, whereas both low-dose cefazolin and low-dose vancomycin reduced the in vivo and ex vivo bacterial burden only moderately. The addition of rifampin to low-dose cefazolin and vancomycin was highly effective in further reducing the CFU harvested from the implants. However, vancomycin-rifampin was more effective than cefazolin-rifampin in further reducing the CFU harvested from the surrounding tissue capsules. Future studies in humans will be required to determine whether the addition of rifampin has improved efficacy in preventing device-related infections in clinical practice.

The incidence of infections related to cardiac devices (such as permanent pacemakers) has been increasing out of proportion to implantation rates. As management of device infections typically requires explantation of the device, optimal prophylactic strategies are needed. Cefazolin and vancomycin are widely used as single agents for surgical prophylaxis against cardiac device-related infections. However, combination antibiotic prophylaxis may further reduce infectious complications. To model a localized subcutaneous implant-related infection, a bioluminescent strain of Staphylococcus epidermidis was inoculated onto a medical-procedure-grade titanium disc, which was placed into a subcutaneous pocket in the backs of mice. In vivo bioluminescence imaging, quantification of ex vivo CFU from the capsules and implants, variable-pressure scanning electron microscopy (VP-SEM), and neutrophil enhanced green fluorescent protein (EGFP) fluorescence in LysEGFP mice were employed to monitor the infection. This model was used to evaluate the efficacies of low- and high-dose cefazolin (50 and 200 mg/kg of body weight) and vancomycin (10 and 110 mg/kg) intravenous prophylaxis with or without rifampin (25 mg/kg). High-dose cefazolin and high-dose vancomycin treatment resulted in almost complete bacterial clearance, whereas both low-dose cefazolin and low-dose vancomycin reduced the in vivo and ex vivo bacterial burden only moderately. The addition of rifampin to low-dose cefazolin and vancomycin was highly effective in further reducing the CFU harvested from the implants. However, vancomycin-rifampin was more effective than cefazolin-rifampin in further reducing the CFU harvested from the surrounding tissue capsules. Future studies in humans will be required to determine whether the addition of rifampin has improved efficacy in preventing device-related infections in clinical practice.

Periprosthetic joint infections are devastating complications for patients and for our health system. With growing demand for arthroplasty, the incidence of these infections is projected to increase exponentially. This paper is a review of existing animal models to study periprosthetic infection aimed at providing scientists with a succinct presentation of strengths and weaknesses of available in vivo systems. These systems represent the tools available to investigate novel antimicrobial therapies and reduce the clinical and economic impact of implant infections.

BackgroundPost-arthroplasty infections represent a devastating complication of total joint replacement surgery, resulting in multiple reoperations, prolonged antibiotic use, extended disability and worse clinical outcomes. As the number of arthroplasties in the U.S. will exceed 3.8 million surgeries per year by 2030, the number of post-arthroplasty infections is projected to increase to over 266,000 infections annually. The treatment of these infections will exhaust healthcare resources and dramatically increase medical costs.Methodology/principal findingsTo evaluate novel preventative therapeutic strategies against post-arthroplasty infections, a mouse model was developed in which a bioluminescent Staphylococcus aureus strain was inoculated into a knee joint containing an orthopaedic implant and advanced in vivo imaging was used to measure the bacterial burden in real-time. Mice inoculated with 5x10(3) and 5x10(4) CFUs developed increased bacterial counts with marked swelling of the affected leg, consistent with an acute joint infection. In contrast, mice inoculated with 5x10(2) CFUs developed a low-grade infection, resembling a more chronic infection. Ex vivo bacterial counts highly correlated with in vivo bioluminescence signals and EGFP-neutrophil fluorescence of LysEGFP mice was used to measure the infection-induced inflammation. Furthermore, biofilm formation on the implants was visualized at 7 and 14 postoperative days by variable-pressure scanning electron microscopy (VP-SEM). Using this model, a minocycline/rifampin-impregnated bioresorbable polymer implant coating was effective in reducing the infection, decreasing inflammation and preventing biofilm formation.Conclusions/significanceTaken together, this mouse model may represent an alternative pre-clinical screening tool to evaluate novel in vivo therapeutic strategies before studies in larger animals and in human subjects. Furthermore, the antibiotic-polymer implant coating evaluated in this study was clinically effective, suggesting the potential for this strategy as a therapeutic intervention to combat post-arthroplasty infections.

Osteolysis due to wear debris is a primary cause of failure of total joint replacements. Although debris produced by the joint articulating surfaces has been studied and simulated extensively, fretting wear debris, produced at nonarticulating surfaces, has not received adequate attention. We developed a three-station fretting wear simulator to reproduce in vivo motion and stresses at the interfaces of total joint replacements. The simulator is based on the beam bending theory and is capable of producing cyclic displacement from 3 to 1000 microns, under varying magnitudes of contact stresses. The simulator offers three potential advantages over previous studies: The ability to control the displacement by load, the ability to produce very small displacements, and dynamic normal loads as opposed to static. A pilot study was designed to test the functionality of the simulator, and verify that calculated displacements and loads produced the predicted differences between two commonly used porous ingrowth titanium alloy surfaces fretting against cortical bone. After 1.5 million cycles, the simulator functioned as designed, producing greater wear of bone against the rougher plasma-sprayed surface compared to the fiber-mesh surface, as predicted. A novel pin-on-disk apparatus for simulating fretting wear at orthopaedic implant interfaces due to micromotion is introduced. The test parameters measured with the fretting wear simulator were as predicted by design calculations, and were sufficient to measure differences in the height and weight of cortical bone pins rubbing against two porous ingrowth surfaces, plasma-sprayed titanium and titanium fiber mesh. Keywords: Fretting, Wear, Simulator, Micromotion, Implant, Orthopaedic, Tribology

Pulsed Electromagnetic Field (PEMF) has shown efficacy in bone repair and yet the optimum characteristics of this modality and its molecular mechanism remain unclear. To determine the effects of timing of PEMF treatment, we present a novel three-dimensional culture model of osteogenesis that demonstrates strong de novo generation of collagen and mineral matrix and exhibits stimulation by PEMF in multiple stages over 62 days of culture. Mouse postnatal day 2 calvarial pre-osteoblasts were cast within and around Teflon rings by polymerization of fibrinogen and cultured suspended without contact with tissue culture plastic. Ring constructs were exposed to PEMF for 4h/day for the entire culture (Daily), or just during Day1-Day10, Day11-Day 27, or Day28-Day63 and cultured without PEMF for the preceding or remaining days, and compared to no-PEMF controls. PEMF was conducted as HF Physio, 40.85 kHz frequency with a 67 ms burst period and an amplitude of 1.19 mT. Osteogenesis was kinetically monitored by repeated fluorescence measurements of continuously present Alizarin Red S (ARS) and periodically confirmed by micro-CT. PEMF treatment induced early-onset and statistically significant transient stimulation (~4-fold) of the mineralization rate when PEMF was applied Daily, or during D1-D10 and D11-D27. Stimulation was apparent but not significant between D28-D63 by ARS but was significant at D63 by micro-CT. PEMF also shifted the micro-CT density profiles to higher densities in each PEMF treatment group. Ring culture generated tissue with a mineral:matrix ratio of 2.0 by thermogravimetric analysis (80% of the calvaria control), and the deposited crystal structure was 50% hydroxyapatite by X-ray diffraction (63% of the calvaria and femur controls), independent of PEMF. These results were consistent with backscatter, secondary electron, and elemental analysis by scanning electron microscopy. Thus, in a defined, strong osteogenic environment, PEMF applied at different times was capable of further stimulation of osteogenesis with the potential to enhance bone repair. [ABSTRACT FROM AUTHOR]

Purpose: Detailed morphologic analysis of particles produced during wear of orthopedic implants is important in determining a correlation among material, wear, and biological effects. However, the use of simple shape descriptors is insufficient to categorize the data and to compare the nature of wear particles generated by different implants. An approach based on Discrete Fourier Transform (DFT) is presented for describing particle shape and surface texture. Method: Four metal-on-metal bearing couples were tested in an orbital wear simulator under standard and adverse (steepangled cups) wear simulator conditions. Digitized Scanning Electron Microscope (SEM) images of the wear particles were imported into MATLAB to carry out Fourier descriptor calculations via a specifically developed algorithm. The descriptors were then used for studying particle characteristics (shape and texture) as well as for cluster classification. Results and Conclusions: Analysis of the particles demonstrated the validity of the proposed model by showing that steep-angle Co-Cr wear particles were more asymmetric, compressed, extended, triangular, square, and roughened at 3 Mc than after 0.25 Mc. In contrast, particles from standard angle samples were only more compressed and extended after 3 Mc compared to 0.25 Mc. Cluster analysis revealed that the 0.25 Mc steep-angle particle distribution was a subset of the 3 Mc distribution. [ABSTRACT FROM AUTHOR]

Although an important index, the level of bone mineral density (BMD) does not completely describe fracture risk. Another bone structural parameter, the orientation of type I collagen, is known to add to risk determination, independently of BMD, ex vivo. We investigated the Haversian system of transiliac crest biopsies from postmenopausal women before and after treatment with parathyroid hormone (PTH). We used the birefringent signal of circularly polarized light and its underlying collagen arrangements by confocal and electron microscopy, in conjunction with the degree of calcification by high-resolution micro-X-ray. We found that PTH treatment increased the Haversian system area by 11.92 ± 5.82 mm2 to 12.76 ± 4.50 mm2 ( p = 0.04); decreased bright birefringence from 0.45 ± 0.02 to 0.40 ± 0.01 (scale zero to one, p = 0.0005); increased the average percent area of osteons with alternating birefringence from 48.15% ± 10.27% to 66.33% ± 7.73% ( p = 0.034); and nonsignificantly decreased the average percent area of semihomogeneous birefringent osteons (8.36% ± 10.63% versus 5.41% ± 9.13%, p = 0.40) and of birefringent bright osteons (4.14% ± 8.90% versus 2.08% ± 3.36%, p = 0.10). Further, lamellar thickness significantly increased from 3.78 ± 0.11 µm to 4.47 ± 0.14 µm ( p = 0.0002) for bright lamellae, and from 3.32 ± 0.12 µm to 3.70 ± 0.12 µm ( p = 0.045) for extinct lamellae. This increased lamellar thickness altered the distribution of birefringence and therefore the distribution of collagen orientation in the tissue. With PTH treatment, a higher percent area of osteons at the initial degree of calcification was observed, relative to the intermediate-low degree of calcification (57.16% ± 3.08% versus 32.90% ± 3.69%, p = 0.04), with percentage of alternating osteons at initial stages of calcification increasing from 19.75 ± 1.22 to 80.13 ± 6.47, p = 0.001. In conclusion, PTH treatment increases heterogeneity of collagen orientation, a starting point from which to study the reduction in fracture risk when PTH is used to treat osteoporosis. © 2012 American Society for Bone and Mineral Research [ABSTRACT FROM AUTHOR]

The article studies the wear rates in experimental metal-on-metal artificial discs for the lumbar spine through the performance of tests using a custom spine wear simulator. It examines the effects of the presence of a keel and notch, clearance and carbon content on wear. Research findings show evidence of abrasive and fatigue wear, with wear rates ranging from 6.2 to 15.8 millimeters per million cycles.

AbstractBackgroundObjectiveMethodsResultsConclusion\nIMPLICATIONS FOR REHABILITATIONFacioscapulohumeral Muscular Dystrophy (FSHD) is a genetically linked disorder characterized by the progressive deterioration of muscles controlling facial and scapular movement. The severity and distribution of affected muscle groups vary significantly across patient demographics, necessitating diverse assistive approaches.This review aims to evaluate the effectiveness of assistive devices and therapeutic options, including medications and rehabilitative therapies, tailored to specific manifestations of FSHD.An analysis of existing literature and clinical trials was conducted to explore current assistive technologies and pharmacological treatments, focusing on their application to FSHD patients with varying symptom severity.Although several pharmacological treatments, such as steroids, supplements, protein inhibitors, and knockout strategies, are under investigation, none have yet fully counteracted the disease process driven by toxic DUX4 production. Consequently, the broad assortment of assistive devices currently on the market remain critical for improving quality of life.Despite advances in pharmacological research, the variability in FSHD manifestations necessitates a personalized approach combining assistive technologies and tailored therapeutic interventions. Future research should continue exploring integrative strategies to address the unique needs of FSHD patients.This paper will provide insight to a variety of assistive technologies that can improve the quality of life for individuals with FSHDAllows the reader to get a better understanding of the symptoms of FSHDHighlights physical impairments at a phenotypic level that patients with FSHD live with on a day-to-day basis and potential ways to address these issues. [ABSTRACT FROM AUTHOR]

Staphylococcus epidermidis is implicated in a multitude of human infections and is one of the major causes of clinical infections in hospitals, especially at surgical sites and on indwelling medical devices, such as orthopedic implants. These infections are especially dangerous because of the S. epidermidis propensity to form biofilms, which increases resistance to antibiotics and the natural immune response. This study investigated pulsed electromagnetic fields (PEMF) as a potential treatment to combat such infections, as PEMF exposure was expected to disrupt the electrostatic forces that adhere staphylococcal cells to surfaces and to one another. To test the effect of PEMF on biofilms, S. epidermidis cultures were exposed to PEMF at various durations either during the growth phase or after a full biofilm had formed. In addition, cells were exposed to PEMF and concomitant antibiotic treatment. Biofilm viability was quantified by both crystal violet and alamarBlue assays and scanning electron microscopy. The results demonstrated that PEMF significantly inhibited biofilm formation and disrupted preformed biofilms in vitro while also showing synergistic biofilm inhibition when combined with antibiotics. These combined results indicate that PEMF should be considered a promising novel technique for treating S. epidermidis biofilm infections and undergo further testing in vivo . IMPORTANCE Antibiotic resistance and biofilm infections are major issues in health care because of the lack of a successful treatment modality and poor patient outcomes. These infections are a particular issue following orthopedic surgery or trauma wherein an infection may form on an orthopedic implant or patient's bone. The presented study demonstrates that pulsed electromagnetic fields may be a promising novel treatment for such infections and can overcome the medical challenges presented by biofilm formation. Furthermore, the effects demonstrated are even greater when combining pulsed electromagnetic field therapy with traditional antibiotics.

FlhDC is a heterohexameric complex that acts as a master regulator of flagellar biosynthesis genes in numerous bacteria. Previous studies have identified a single flhDC operon encoding this complex. However, we found that two flhDC loci are present throughout Paraburkholderia , and two additional flhC copies are also present in Paraburkholderia unamae. Systematic deletion analysis in P. unamae of the different flhDC copies showed that one of the operons, flhDC1 , plays the predominant role, with deletion of its genes resulting in a severe inhibition of motility and biofilm formation. Expression analysis using promoter- lacZ fusions and real-time quantitative PCR support the primary role of flhDC1 in flagellar gene regulation, with flhDC2 a secondary contributor. Phylogenetic analysis shows the presence of the flhDC1 and flhDC2 operons throughout Paraburkholderia . In contrast, Burkholderia and other bacteria only carry the copy syntenous with flhDC2 . The variations in impact each copy of flhDC has on downstream processes indicate that regulation of FlhDC in P. unamae , and likely other Paraburkholderia species, is regulated at least in part by the presence of multiple copies of these genes. IMPORTANCE Motility is important in the colonization of plant roots by beneficial and pathogenic bacteria, with flagella playing essential roles in host cell adhesion, entrance, and biofilm formation. Flagellar biosynthesis is energetically expensive. Its complex regulation by the FlhDC master regulator is well studied in peritrichous flagella expressing enterics. We report the unique presence throughout Paraburkholderia of multiple copies of flhDC . In P. unamae , the flhDC1 copy showed higher expression and a greater effect on swim motility, flagellar development, and regulation of downstream genes, than the flhDC2 copy that is syntenous to flhDC in Escherichia coli and pathogenic Burkholderia spp. The flhDC genes have evolved differently in these plant-growth-promoting bacteria, giving an additional layer of complexity in gene regulation by FlhDC.

Tissue reconstruction requires the utilization of multiple biomaterials and cell types to replicate the delicate and complex structure of native tissues. Various three-dimensional (3D) bioprinting techniques have been developed to fabricate customized tissue structures; however, there are still significant challenges, such as vascularization, mechanical stability of printed constructs, and fabrication of gradient structures to be addressed for the creation of biomimetic and complex tissue constructs. One approach to address these challenges is to develop multimaterial 3D bioprinting techniques that can integrate various types of biomaterials and bioprinting capabilities towards the fabrication of more complex structures. Notable examples include multi-nozzle, coaxial, and microfluidics-assisted multimaterial 3D bioprinting techniques. More advanced multimaterial 3D printing techniques are emerging, and new areas in this niche technology are rapidly evolving. In this review, we briefly introduce the basics of individual 3D bioprinting techniques and then discuss the multimaterial 3D printing techniques that can be developed based on combination of these techniques for the engineering of complex and biomimetic tissue constructs. We also discuss the perspectives and future directions to develop state-of-the-art multimaterial 3D bioprinting techniques for engineering tissues and organs., (© 2021 IOP Publishing Ltd.)

Periprosthetic joint infections are devastating complications for patients and for our health system. With growing demand for arthroplasty, the incidence of these infections is projected to increase exponentially. This paper is a review of existing animal models to study periprosthetic infection aimed at providing scientists with a succinct presentation of strengths and weaknesses of available in vivo systems. These systems represent the tools available to investigate novel antimicrobial therapies and reduce the clinical and economic impact of implant infections.

Vancomycin is widely used for intravenous prophylaxis against surgical implant infections. However, it is unclear whether alternative antibiotics used to treat methicillin-resistant Staphylococcus aureus (MRSA) infections are effective as prophylactic agents. The aim of this study was to compare the efficacies of vancomycin, daptomycin, and tigecycline as prophylactic therapy against a methicillin-sensitive S. aureus (MSSA) or MRSA surgical implant infection in mice. MSSA or MRSA was inoculated into the knee joints of mice in the presence of a surgically placed medical-grade metallic implant. The efficacies of low- versus high-dose vancomycin (10 versus 110 mg/kg), daptomycin (1 versus 10 mg/kg), and tigecycline (1 versus 10 mg/kg) intravenous prophylaxis were compared using in vivo bioluminescence imaging, ex vivo bacterial counts, and biofilm formation. High-dose vancomycin, daptomycin, and tigecycline resulted in similar reductions in bacterial burden and biofilm formation. In contrast, low-dose daptomycin and tigecycline were more effective than low-dose vancomycin against the implant infection. In this mouse model of surgical implant MSSA or MRSA infection, daptomycin and tigecycline prophylaxis were effective over a broader dosage range than vancomycin. Future studies in humans will be required to determine whether these broader effective dose ranges for daptomycin and tigecycline in mice translate to improved efficacy in preventing surgical implant infections in clinical practice.