Search

Lactic acid bacteria (LAB) are widely used to produce various food products, adding flavor, texture, and health benefits. The bacteria are commonly grown on expensive nutrients like glucose, sucrose, and yeast extracts, which makes them commercially unappealing. In the current study, Lactobacillus acidophilus TISTR 1338 culture was studied using spent cell yeast as a nitrogen source and molasses as a carbon source. The drying process used to create starter cultures of Lactobacillus acidophilus TISTR 1338 was vacuum drying. After vacuum drying, this bacterium had a survival rate of 8.08 log CFU/g. The dried strain survived for four months at 37 °C. With wasted cells at 0.5%, molasses concentration at 11% at 2.14 109 CFU/mL at 22 h, precise growth rate at 0.39 h−1, and yield cell mass at 1.67 1011 CFU/g sugar, yeast produced the maximum cell mass. The lower viability of the tested strain was induced by a higher temperature during this prolonged storage. Meanwhile, dehydrated starter culture was subjected to accelerated storage testing at 50, 60, and 70 °C. To determine the vacuum-dried Lactobacillus acidophilus TISTR 1338′s long-term storage viability, a temperature-dependent prophecy model was created. Molasses and spent cell yeast serve as promising carbon and nitrogen sources when optimized conditions are employed. The study also suggests that vacuum drying is a promising method for producing dried cells suitable for non-refrigerated storage conditions.

Plantain is a key staple food in Central and West Africa, but there is limited understanding of its market in Africa. In addition, the cooking methods for enhancing the nutritional value, consumer preference, and willingness to pay for plantain and plantain-based products are not well understood. The knowledge gaps in the market and consumer dimension of the food chain need to be known to increase plantain utilization and guide breeding efforts. This research contributes by examining the cooking methods, consumer preference, and willingness to pay for plantain and plantain-based products in Cameroon and Nigeria. A household survey sample of 454 Cameroonian consumers in four divisions of Central Region and 418 Nigerian consumers in seven government areas of Oyo State in southwest Nigeria was the basis for the analysis. The results showed some levels of similarity and difference in the consumption and cooking of boiled, roasted, and fried plantain in both countries. The trend in consumption of all plantain-based products was constant in Cameroon but increased in Nigeria. The most important factor influencing Cameroonian consumers’ choice of plantain and its products was taste, while the nutrition trait influenced Nigerian consumers. Both Cameroonian and Nigerian consumers considered packaging, location of produce, and size and quantity as the least important factors. In addition, socioeconomic characteristics were significant determinants of consumers’ choices to consume plantain and its products. Gender significantly influenced (p < 0.05) taste, while nutrition was significantly driven (p < 0.05) by education and annual income. Household size played a significant role (p < 0.05) in consumers’ choices when the price was considered. These findings serve as a guideline to improve existing products to match the needs of consumers in each country and develop products for different consumer segments and potentially increase production.

The effect of the pulsed-vacuum stimulation (PVS) on the external gelation process of calcium-alginate (Ca-Alg) hydrogel balls was studied. The process was conducted at four different working pressures (8, 35, 61, and 101 kPa) for three pulsed-vacuum cycles (one cycle consisted of three repetitions of 10 min of depressurization and 10 min of vacuum liberation). The diffusion coefficients (D) of calcium cations (Ca2+) gradually reduced over time and were significantly pronounced (p < 0.05) at the first three hours of the external gelation process. The rate of weight reduction (WR) and rate of volume shrinkage (Sv) varied directly according to the D value of Ca2+. A significant linear relationship between WR and Sv was observed for all working pressures (R2 > 0.91). An application of a pulsed vacuum at 8 kPa led to the highest weight reduction and shrinkage of Ca-Alg hydrogel samples compared to other working pressures, while 61 kPa seemed to be the best condition. Although all textural characteristics (hardness, breaking deformation, Young’s modulus, and rupture strength) did not directly variate by the level of working pressures, they were likely correlated with the levels of WR and Sv. Scanning electron micrographs (SEM) supported that the working pressure affected the characteristics of Ca-Alg hydrogel structure. Samples stimulated at a working pressure of 8 kPa showed higher deformation with heterogenous structure, large cavities, and looser layer when compared with those at 61 kPa. These results indicate the PVS is a promising technology that can be effectively applied in the external gelation process of Ca-Alg gel.

The effect of cultivar, ripening stage, and pre-treatment method were investigated on the nutritional, physicochemical, and pasting properties of plantain flours from two plantains and two plantain hybrids. There were significant variations (p < 0.05) in chemical composition and physical properties influenced by the interaction of cultivars, ripening stages, and pre-treatment methods. The highest levels of amylose, water-holding capacity (WHC), and oil-holding capacity (OHC) were observed in unripe flours and acid-treated flour recorded the highest content of resistant starch (RS). Flour after pre-blanching contained the highest level of total phenolic (TP), carotenoid contents, and browning index (BI) value. In contrast, acid-treated flours had the lowest BI value. As ripening progressed, peak viscosity and breakdown values increased but final viscosity, setback, and pasting temperature values were reduced. Untreated flour samples showed the highest peak viscosity. Higher breakdown values were found in acid-treated samples and higher setback values in pre-blanched samples.

The objective of this study was to investigate the feasibility of a computer vision system (CVS) for assessing the contact angle of frying oil. The oil was used to fry carbohydrate- and protein-based foods for 40 h, and the oil was collected for measuring free fatty acids (FFA), peroxide value (PV), total polar materials (TPMs), and FOS reading (dielectric constant). The results showed that FFA linearly increased with frying time (R2 > 0.95) while the polynomial correlation between TPMs and FOS reading as a result of time was observed (R2 > 0.97). The contact angle obtained from CVS was highly correlated with all chemical qualities (R2 > 0.94), except PV. In addition, the contact angle models could be used to adequately predict FFA, TPMs, and FOS reading of frying oil (R2 > 0.91). This result suggested that the image processing technique through CVS could be an appropriate alternative to chemical analysis, especially for small- and medium-scale industrial frying.