Search

The Asteraceae family includes species used for food or medicinal remedies, one of which is Lagascea decipiens, which is native to the Sierra Madre Occident in Mexico. Because this plant has not been previously characterized, its biochemical components and antioxidant and antimicrobial activities were quantified in its flowers, leaves and stems. The leaves are sources of ash (20.37 g/100 g dry weight) and the flowers of total lipids (7.32 g/100 g dry weight). According to their fatty acid profile, the leaves provide polyunsaturated fatty acids (63.25 %), the most abundant of which is alpha-linolenic acid. Leaves are the main source of essential amino acids (55.58 ± 0.05 mg/g dry weight) and α-tocopherol (201.96 ± 19.68 µg/g dry weight). The antioxidant activity against the radical DPPH was higher in the flowers (20.04 ± 0.04 µmol eq. of Trolox/g of extract dry weight) than in other parts. The aqueous or alcoholic extracts of the plant did not show activity against selected microorganisms. Due to their biochemical components and antioxidant activity, the leaves and flowers of the native plant L. decipiens have potential for use in the food and medicinal industries.

Nixtamalized products are very appreciated in México and the world; however, the traditional nixtamalization process (TNP) is highly polluting. Extrusion nixtamalization process (ENP) is an alternative method; however, much research reported high starch damage by ENP that affects the rheology, crystallinity, and general quality of nixtamalized products. This work studies the structural changes of cornstarch exposed to ENP under controlled conditions to produce corn flour, masa, and tortilla. The results of ENP and TNP showed significant differences (p

The aim of this study was to compare the physicochemical, rheological, and morphological characteristics of corn, nixtamalized flour, masa, and tortillas from the traditional nixtamalization process (TNP) and the extrusion nixtamalization process (ENP) and their relationship with starch. The traditional and extrusion processes were carried out using the same variety of corn. From both processes, samples of ground corn, nixtamalized flour, masa, and tortillas were obtained. The extrusion process produced corn flour with particle sizes smaller (particle size index, PSI = 51) than that of flour produced by the traditional nixtamalization process (PSI = 44). Masa from the TNP showed higher modulus of elasticity (G′) and viscosity (G″) values than that off masa from the ENP. Furthermore, in a temperature sweep test, masa from the TNP showed a peak in G′ and G″, while the masa from the ENP did not display these peaks. The ENP-produced tortillas had higher resistant starch contents and comparable firmness and rollability to those from the TNP but lower quality parameter values. A comparison of the products’ physicochemical properties obtained by the two processes shows the importance of controlling the damage to starch during the milling and extrusion processes to obtain tortillas of better quality. For the first time, we propose the measurement of the viscoelastic parameters G′ and G″ in temperature sweep mode to monitor changes in the degree of starch damage.

At present, more than 70 million tons per year of technical lignins are obtained from cellulose pulping and lignocellulosic refineries (e.g., kraft, lignosulfonates, soda, and organosolv lignin). These lignins are commonly incinerated to produce steam and energy, and only a small part is used as an additive in various low volume and niche applications, such as dispersant, in concrete admixtures, as an adhesive and as a binder. Furthermore, the potential of technical lignins is considered to be beyond that of an inexpensive fuel or raw material to produce low added value products. The technical lignins consist of complex polyphenolic polymers that contain numerous chemical functional groups, such as phenolic hydroxyl, carboxylic, carbonyl, and methoxyl groups. The phenolic hydroxyl and methoxyl groups present in lignin reportedly possess various biological activities. The amount of data describing the biological activities of technical lignins has increased in the last 10 years. This review presents the most relevant research concerning the various biological activities (antioxidant, antimicrobial, antimutagenic, and others) of technical lignins. Additionally, the most promising and relevant applications are highlighted.

Extrusion is an alternative technology for the production of nixtamalized products. The aim of this study was to obtain an expanded nixtamalized snack with whole blue corn and using the extrusion process, to preserve the highest possible total anthocyanin content, intense blue/purple coloration (color b) and the highest expansion index. A central composite experimental design was used. The extrusion process factors were: feed moisture (FM, 15%–23%), calcium hydroxide concentration (CHC, 0%–0.25%) and final extruder temperature (T, 110–150 °C). The chemical and physical properties evaluated in the extrudates were moisture content (MC, %), total anthocyanins (TA, mg·kg−1), pH, color (L, a, b) and expansion index (EI). ANOVA and surface response methodology were applied to evaluate the effects of the extrusion factors. FM and T significantly affected the response variables. An optimization step was performed by overlaying three contour plots to predict the best combination region. The extrudates were obtained under the following optimum factors: FM (%) = 16.94, CHC (%) = 0.095 and T (°C) = 141.89. The predicted extrusion processing factors were highly accurate, yielding an expanded nixtamalized snack with 158.87 mg·kg−1 TA (estimated: 160 mg·kg−1), an EI of 3.19 (estimated: 2.66), and color parameter b of −0.44 (estimated: 0.10).

Lignin contributes to the recalcitrance of lignocellulosic biomass and affects enzymatic activity during biorefinery operations. Therefore, it must be removed before further processing. Organic solvents (organosolv) and ionic liquids are two important pretreatments for delignifying lignocellulosic biomass. They have proven beneficial for fractionating and recovering cellulose and hemicellulose, as well as lignin with useful physicochemical properties. Volatility and harsh conditions of the acidic systems that result in toxicity, corrosion, and pollution are the main problems of organosolv. Ionic liquids, generally recognized as green solvents, have also been proposed as a possible solution to the challenge of using lignocellulosic biomass. Ionic liquids can either dissolve the lignocellulosic biomass completely or dissolve it into individual fractions. This review considers the advantages and disadvantages of organosolv and ionic liquids, since both are important methods to fractionate lignocellulosic biomass in their main components which can be converted into value added products.

Lime cooking extrusion (LCE) is a widely applied technology for producing second-generation snacks, as an alternative to traditional nixtamalization (TN). Pigmented maize has been used to produce snacks with similar organoleptic characteristics to TN products and to obtain a product with additional functional benefits due to the anthocyanic compounds contained in those grains. However, during the process, anthocyanins are degraded, and several chemical modifications occur. Response surface methodology is applied to evaluate extrusion factors and their effects on the response variables of extrudates. The aim of this study was to evaluate the changes in specific anthocyanins after extrusion in second-generation blue maize snacks. Three anthocyanins were identified and quantified by HPLC-UV-DAD: cyanidin 3-glucoside and pelargonidin 3-glucoside, which have been previously reported in blue maize and its products, and cyanidin 3,5-diglucoside. Higher retention values were found in the extrudates making LCE a viable option for producing second-generation blue maize snacks.

The effect of bovine plasma protein (BPP) on the inhibition of autolytic activity and its effect on the gelling properties of a protein concentrate (PC) obtained from jumbo squid (Dosidicus gigas) mantle were investigated. Sols and gels were prepared from the PC by adding different amounts of BPP (0, 1, and 2%). Dynamic oscillatory measurements indicated that systems with 1% BPP had a higher elastic modulus (G′), in which hydrophobic interactions were favored. Concerning the technological and textural quality of the gels, BPP caused a greater water holding capacity (WHC), force, cohesiveness, and elasticity, probably due to improvement of the electrostatic and hydrophobic interactions during gel formation. Scanning electron microscopy (SEM) allowed visualization of the formation of more rigid and ordered gels with less porosity when BPP was added. Therefore, the addition of BPP improved the gelling capacity of proteins extracted from giant squid.

The effect of extrusion cooking on bioactive compounds in third-generation snacks (TGSE) and microwave-expanded snacks (MWSE) prepared using black bean, blue maize, and chard (FBCS) was evaluated. FBCS was extruded at different moisture contents (MC; 22.2–35.7%), extrusion temperatures (ET; 102–142 °C), and screw speeds (SP; 96–171 rpm). Total anthocyanin content (TAC), contents of individual anthocyanins, viz., cyanidin-3-glucoside, malvidin-3-glucoside, pelargonidin-3-glucoside, pelargonidin-3-5-diglucoside, and delphinidin-3-glucoside chloride, total phenolic content (TPC), antioxidant activity (AA), and color parameters were determined. TAC and individual anthocyanin levels increased with the reduction in ET. ET and MC affected the chemical and color properties; increase in ET caused a significant reduction in TPC and AA. Microwave expansion reduced anthocyanin content and AA, and increased TPC. Extrusion under optimal conditions (29% MC, 111 rpm, and 120 °C) generated products with a high retention of functional compounds, with high TAC (41.81%) and TPC (28.23%). Experimental validation of optimized process parameters yielded an average error of 13.73% from the predicted contents of individual anthocyanins. Results suggest that the TGSE of FBCS obtained by combining extrusion and microwave expansion achieved significant retention of bioactive compounds having potential physiological benefits for humans.