Search

Biomass wastes originating from palm oil milling activities can be characterized by their high biochemical oxygen demand (BOD), chemical oxygen demand (COD), total suspended solid (TSS), and oil and grease content. The utilization of oil palm wastes such as palm oil mill effluent (POME) and empty fruit bunch (EFB) has great potential for a sustainable energy biomass pellet as it reduces the reliance on conventional materials for energy production. A mixture of POME and EFB in various ratios ranging between 7:3, 8:2, 9:1, and 10:0 was fermented in the presence of Lysinibacillus sp. LC 556247 for 120 h at 37 ± 2 °C and 180 rpm with the aim of elucidating the biodegradation of complex organic material in terms of BOD, COD, TSS, total organic carbon, inorganic carbon, and total carbon content. After fermentation, the mixtures were oven dried at 105 °C overnight and then subjected to calorific energy value (CEV) determination. The highest CEV of 20.26 MJ/kg was achieved for a ratio of 10:0 (slightly higher than the control experiment with the value of 18.67 MJ/kg), with maximum removal efficiencies of COD (12.19%), BOD (11.72%), TSS (93.94%), and oil reduction of 17.43%. The addition of EFB did not positively increase the CEV. [ABSTRACT FROM AUTHOR]

Palm oil mill effluent (POME) is a potential alternative sources of biomass fuel upon phycoremediation treatment using microorganisms. In this study, Coccomyxa dispar and Scenedesmus parvus, as acidophilic microalgae, were used to investigate growth and the production of biomass fuel from the cultivation of POME, as well the effectiveness of removing contaminants from POME. Individual cultivation was conducted at 26 ± 3 °C for 14 days under three growth modes (mixotrophic, heterotrophic, and autotrophic). To elucidate the potential phycoremediation properties, the characteristics of treated POME were compared, such as optical density (OD), cell dry weight (CDW), calorific energy values (CEV), chemical oxygen demand (COD), biochemical oxygen demand (BOD), carbon, hydrogen, and nitrogen (CHN) elemental analysis, including oil and grease content. S. parvus exhibits an outstanding growth profile for all growth modes compared to C. dispar, with measurements of 228.8, 37.08, and 118.2 mg/L observed at day 14 of cultivation. The highest CEV is 32.30 MJ/kg, which was obtained from S. parvus in the mixotrophic mode. Maximum removal efficiency for COD and BOD was 81% and 19% in the mixotrophic growth mode with S. parvus. These results pinpoint that S. parvus has the potential to be utilized for biomass fuel production with high CEV and effective POME phycoremediation. [ABSTRACT FROM AUTHOR]

Biodegradable polymers are materials that can decompose through the action of various environmental microorganisms, such as bacteria and fungi, to form water and carbon dioxide. The biodegradability characteristics have led to a growing demand for the accurate and precise determination of the degraded polymer composition. With the advancements in analytical product development, various analytical methods are available and touted as practical and preferable methods of bioanalytical techniques, which enable the understanding of the complex composition of biopolymers such as polyhydroxyalkanoates and poly(lactic acid). The former part of this review discusses the definition and examples of biopolymers, followed by the theory and instrumentation of analytical methods applicable to the analysis of biopolymers, such as physical methods (SEM, TEM, weighing analytical balance, etc.), chromatographic methods (GC, THM-GC, SEC/GPC), spectroscopic methods (NMR, FTIR, XRD, XRF), respirometric methods, thermal methods (DSC, DTA, TGA), and meta-analysis. Special focus is given to the chromatographic methods, because this is the routine method of polymer analysis. The aim of this review is to focus on the recent developments in the field of biopolymer analysis and instrument application to analyse the various types of biopolymers. [ABSTRACT FROM AUTHOR]

Aims: The primary aim of this study was to utilize abundant palm oil mill effluent (POME) waste and turn it into a value-added product of biomass fuel with high calorific energy value (CEV) via fermentation and drying process, then simultaneously reduce abundant liquid waste. Methodology and results: POME is available abundantly in Malaysia and only a small portion of it is utilized to produce other value-added products. In this study, fermentation of POME in the presence of bacteria (Lysinibacillus sp.) and fungus (Aspergillus flavus) separately at 37 °C, 180 rpm for 5 days, followed by overnight oven-drying at 85 °C was conducted. Four fermentation medium conditions were performed, viz.: (1) autoclaved POME, (2) autoclaved POME with the addition of Lysinibacillus sp., (3) autoclaved POME with the addition of A. flavus and (4) POME as it is (non-sterile). Conclusion, significance and impact of study: Among all conditions, fermentation utilizing autoclaved POME in the presence of A. flavus evinced the highest CEV of 25.18 MJ/kg. The fermentation in the presence of Lysinibacillus sp. strain revealed high COD and BOD removal efficiency of 59.20% and 320.44 mg/L as well as the highest reduction of oils and grease among other groups with the value of 15.84%. Future research directions are proposed for the elucidation of co-fermentation in the presence of both Lysinibacillus sp. and A. flavus. [ABSTRACT FROM AUTHOR]

Biomass fuel is one of the renewable energy sources that can be produced by valorization of palm oil mill effluent (POME) and empty fruit bunch (EFB). POME and EFB are available abundantly in Malaysia and only small portion is utilized to produce other value-added products. The objective of this study is to: (1) utilize the wastes from agro-industrial sector especially palm oil wastes and bio-valorize into value-added product of biomass fuel with high CEV, and simultaneously (2) reduce the waste accumulated in the palm oil factory. In this study, co-fermentation of bacteria (Lysinibacillus sp.) and fungus (Aspergillus flavus) at 37 °, 180 rpm for 5 days, followed by overnight oven-dry at 85 ° was conducted utilizing a mixture of POME and EFB with the ratio of 7:3 at laboratory scale. Three fermentation medium conditions were performed, namely: (1) Group 1: autoclaved POME and EFB without addition of any microorganisms, (2) Group 2: autoclaved POME and EFB with the addition of Lysinibacillus sp. LC 556247 and Aspergillus flavus, and (3) Group 3: POME and EFB as it is (nonsterile). Among all condition, Group 2 with co-fermentation evinced the highest calorific energy value (CEV) of 26.71 MJ/kg, highest biochemical oxygen demand (BOD) removal efficiency of 61.11%, chemical oxygen demand (COD) removal efficiency at 48.47%, and total suspended solid (TSS) reduction of 37.12%. Overall, this study successfully utilized abundant POME and EFB waste and turn into value added product of renewable biomass fuel with high CEV percentage and simultaneously able to reduce abundant liquid waste. [ABSTRACT FROM AUTHOR]

Simple Summary: Palm oil mill effluent (POME) requires treatment prior to discharge to the environment. Biological processing technology is highly preferable due to its advantages of environmentally friendliness, cost effectiveness, and practicality. These methods utilized various designs and modifications of bioreactors fostering effective fermentation technology in the presence of fungi, bacteria, microalgae, and a consortium of microorganisms. This review highlights the recent biological processing technology for POME treatment as a resource utilization. POME is the most voluminous waste generated from palm oil milling activities. The discharge of POME into the environment without any treatment processing could inflict an undesirable hazard to humans and the environment due to its high amount of toxins, organic, and inorganic materials. The treatment of POME prior to discharge into the environment is utmost required to protect the liability for human health and the environment. Biological treatments are preferable due to eco-friendly attributes that are technically and economically feasible. The goal of this review article is to highlight the current state of development in the biological processing technologies for POME treatment. These biological processing technologies are conducted in the presence of fungi, bacteria, microalgae, and a consortium of microorganisms. Numerous microbes are listed to identify the most efficient strain by monitoring the BOD, COD, working volume of the reactor, and treatment time. The most effective processing technology for POME treatment uses an upflow anaerobic sludge blanket reactor with the COD value of 99%, hydraulic retention time of 7.2 days, and a working volume of 4.7 litres. Biological processing technologies are mooted as an efficient and sustainable management practice of POME waste. [ABSTRACT FROM AUTHOR]

There is considerable interest in the development of simple methods for quantifying production of the biodegradable polyester poly(3-hydroxybutyrate) [P(3HB)] by bacteria. Cells of Cupriavidus necator were grown on agar medium containing different concentrations of glucose (10–25 g/L) as a sole carbon source. Trace amounts (100±5 μg) of dried C. necator cells were directly subjected to thermally assisted hydrolysis and methylation-gas chromatography (THM-GC) in the presence of tetramethylammonium hydroxide (TMAH). On the resulting chromatograms, a series of characteristic peaks, attributed to the THM products from poly(3-hydroxybutylate) accumulated in the bacterial cells, were clearly observed without any interfering component. Based on the peak intensities, the contents of P(3HB) in C. necator were determined precisely and rapidly without using any cumbersome sample pretreatment. Furthermore, the values of the P(3HB) contents coincided overall with those obtained by the conventional method involving solvent extraction followed by gravimetric determination. [ABSTRACT FROM AUTHOR]

Biodegradability of poly(butylene succinate-co-butylene adipate) (PBSA) was studied based on its copolymer composition determined by thermally assisted hydrolysis and methylation-gas chromatography (THM-GC) using trace amounts (20 µg) of the film samples. The copolymer compositions of butylene adipate (BA) units gradually decreased with soil burial degradation time, reflecting preferential biodegradation of BA moieties during soil burial due to their lower crystallinity. Furthermore, local differences in biodegradability of a given PBSA film after soil burial were also successfully evaluated. [ABSTRACT FROM PUBLISHER]

A bacterial strain, identified as Lysinibacillus sp. LC 556247 POME, was isolated from palm oil mill effluent (POME). The present article highlights the potential utilization of POME as a sole fermentation medium by Lysinibacillus sp. LC 556247 to produce biomass fuel via aerobic fermentation. The fermentation was performed in a shake flask with a working volume of 300 mL, agitated at 180 rpm, incubated at 35 ± 2 °C for various fermentation hours, ranging from 1, 2, 3, 4, 24, 48, 72, 96, and 120 h, and was followed by a drying process. Elucidation of the POME characteristics, calorific energy values (CEV), moisture content (MC), oil and grease content, chemical oxygen demand (COD), biochemical oxygen demand (BOD), dissolved oxygen (DO), total suspended solids (TSS), pH, total nitrogen, and the colony-forming unit (CFU) were performed. The results demonstrate that the highest CEV, of 21.25 ± 0.19 MJ/kg, was obtained at 48 h fermentation. High amounts of extractable oil and nitrogen content were retrieved at the highest CEV reading of the fermented and dried POME samples, which were 17.95 ± 0.02% and 12.80 ± 0.08%, respectively. The maximum removal efficiencies for the COD (50.83%), the BOD (71.73%), and the TSS (42.99%) were achieved at 120 h of fermentation, with an operating pH ranging from 4.49–4.54. The XRF analysis reveals that the fermented and dried products consisted of elements that had a high amount of carbon and potassium, and a significantly low amount of silica, which is sufficient for the effective burning of biomass fuel in the boiler. [ABSTRACT FROM AUTHOR]

Overconsumption of plastic goods and improper handling of petroleum-derived plastic waste have brought a plethora of negative impacts to the environment, ecosystem and human health due to its recalcitrance to degradation. These drawbacks become the main driving force behind finding biopolymers with the degradable properties. With the advancement in biopolymer research, polyhydroxyalkanoate (PHA) and poly(lacyic acid) (PLA) and its composites have been alluded to as a potential alternative to replace the petrochemical counterpart. This review highlights the current synthesis process and application of PHAs and PLA and its composites for food packaging materials and coatings. These biopolymers can be further ameliorated to enhance their applicability and are discussed by including the current commercially available packaging products. Factors influencing biodegradation are outlined in the latter part of this review. The main aim of this review article is to organize the scattered available information on various aspects of PHAs and PLA, and its composites for packaging application purposes. It is evident from a literature survey of about 140 recently published papers from the past 15 years that PLA and PHA show excellent physical properties as potential food packaging materials. [ABSTRACT FROM AUTHOR]

Ponding system or land application techniques are widely used at industrial scale to treat palm oil mill effluent (POME) prior to discharge to the environment. POME is considered as one of the major problems that has generated voluminously from the palm oil industries. The main purpose of this article is to organize the scattered available information on various aspects and a wide range of promising current POME treatments including biological microorganisms, physicochemical methods of coagulation, and membrane and thermochemical process. In addition, the integrated system of anaerobic-aerobic bioreactor (IAAB), which has been touted as highly efficient with easy control at acceptable temperature range and shorter treatment time, has potential to be exploited for POME treatment. The main influencing factors for IAAB POME treatment are highlighted as outstanding characteristics for challenges and future prospects. [ABSTRACT FROM AUTHOR]