Search

This paper investigates the design of winglet tips for unshrouded high pressure turbine rotors considering aerodynamic and thermal performance simultaneously. A novel parameterization method has been developed to alter the tip geometry of a rotor blade. A design survey of uncooled, flat-tipped winglets is performed using Reynolds-averaged Navier-Stokes (RANS) calculations for a single rotor at engine representative operating conditions. Compared to a plain tip, large efficiency gains can be realized by employing an overhang around the full perimeter of the blade, but the overall heat load rises significantly. By employing an overhang on only the early suction surface, significant efficiency improvements can be obtained without increasing the overall heat transfer to the blade. The flow physics are explored in detail to explain the results. For a plain tip, the leakage and passage vortices interact to create a three-dimensional impingement onto the blade suction surface, causing high heat transfer. The addition of an overhang on the early suction surface displaces the tip leakage vortex away from the blade, weakening the impingement effect and reducing the heat transfer on the blade. The winglets reduce the aerodynamic losses by unloading the tip section, reducing the leakage flow rate, turning the leakage flow in a more streamwise direction, and reducing the interaction between the leakage fluid and end wall flows. Generally, these effects are most effective close to the leading edge of the tip where the leakage flow is subsonic. [ABSTRACT FROM AUTHOR]

Reliable means of predicting heat transfer in cavities adjacent to the main gas path are increasingly being sought by engineers involved in the design of gas turbines. In this pa-per, an interim summary of the results of a five-year research program sponsored by the European Union (EU) and several leading gas turbine manufacturers and universities will be presented. Extensive use is made of computational fluid dynamics (CFD) and fi-nite element (FE) modeling techniques to understand the thermo-mechanical behavior of a turbine stator well cavity, including the interaction of cooling air supply with the main annulus gas. The objective of the study has been to provide a means of optimizing the design of such cavities for maintaining a safe environment for critical parts, such as disc rims and blade fixings, while maximizing the turbine efficiency and minimizing the fuel burn and emissions penalties associated with the secondary airflow system. The modeling methods employed have been validated against data gathered from a dedicated two-stage turbine rig running at engine representative conditions. Extensive measurements are available for a range of flow conditions and alternative cooling arrangements. The analy-sis method has been used to inform a design change, which is also to be tested. Compari-sons are provided between the predictions and measurements of the turbine stator well component temperature. [ABSTRACT FROM AUTHOR]