Search

Structure-sensitive catalyzed reactions can be influenced by a number of parameters. So far, it has been established that the formation of Pd-C species is responsible for the behavior of Pd nanoparticles employed as catalysts in a butadiene partial hydrogenation reaction. In this study, we introduce some experimental evidence indicating that subsurface Pd hydride species are governing the reactivity of this reaction. In particular, we detect that the extent of formation/decomposition of PdHx species is very sensitive to the Pd nanoparticle aggregate dimensions, and this finally controls the selectivity in this process. The main and direct methodology applied to determine this reaction mechanism step is time-resolved high-energy X-ray diffraction (HEXRD).

Ru and Ni on alumina catalysts have been promoted with a 10 wt% of alkali metal (K or Na) or alkaline earth metal (Ba) and tested in CO2 methanation. For the catalyst consisting of Ni and Ba, the variation of Ba loading while keeping Ni loading constant was studied. The promotion in terms of enhanced CH4 yield was found only for the addition of barium to 15 wt% Ni/Al2O3. In contrast, K and Na addition increased the selectivity to CO while decreasing conversion. For the Ru-based catalyst series, no enhancement in conversion or CH4 yield was attained by any of the alkaline metals. CO2 temperature-programed desorption (CO2-TPD) revealed that the amount of chemisorbed CO2 increased significantly after the addition of the base metal. The reactivity of COx ad-species for each catalyst was assessed by temperature-programed surface reaction (TPSR). The characterization revealed that the performance in the Sabatier reaction was a result of the interplay between the amount of chemisorbed CO2 and the reactivity of the COx ad-species, which was maximized for the (10%Ba)15%Ni/Al2O3 catalyst.

Dimerization of isobutene (IBE) to C8s olefins was evaluated over a range of solid acid catalysts of diverse nature, in a fixed bed reactor working in a continuous mode. All catalytic materials were studied in the title reaction performed between 50–250 °C, being the reaction feed a mixture of IBE/helium (4:1 molar ratio). In all materials, both conversion and selectivity increased with increasing reaction temperature and at 180 °C the best performance was recorded. Herein, we used thermogravimetry analysis (TGA) and temperature programmed desorption of adsorbed ammonia (NH3-TPD) for catalysts characterization. We place emphasis on the nature of acid sites that affect the catalytic performance. High selectivity to C8s was achieved with all catalysts. Nicely, the catalyst with higher loading of Brønsted sites displayed brilliant catalytic performance in the course of the reaction (high IBE conversion). However, optimum selectivity towards C8 compounds led to low catalyst stability, this being attributed to the combined effect between the nature of acidic sites and structural characteristics of the catalytic materials used. Therefore, this study would foment more research in the optimization of the activity and the selectivity for IBE dimerization reactions.

Nanocatalysts, more precisely solids nanomaterials with catalytic properties to be used as heterogeneous catalysts, are an extended and very diverse group of nanostructured materials representing, at present, an active area of research with application in many catalyzed processes [...]

The external surface of a commercial porous stainless steel (PSS) was modified by either oxidation in air at varying temperatures (600, 700, and 800 °C) or coating with different oxides (SiO2, Al2O3, and ZrO2). Among them, PSS-ZrO2 appears as the most suitable carrier for the synthesis of the Pd membrane. A composite Pd membrane supported on the PSS-ZrO2 substrate was prepared by the electroless plating deposition method. Supported Ru catalysts were first evaluated for the low-temperature methane dry reforming (DRM) reaction in a continuous flow reactor (CR). Ru/ZrO2-La2O3 catalyst was found to be active and stable, so it was used in a membrane reactor (MR), which enhances the methane conversions above the equilibrium values. The influence of adding H2O to the feed of DRM was investigated over a Ru/ZrO2-La2O3 catalyst in the MR. Activity results are compared with those measured in a CR. The addition of H2O into the feed favors other reactions such as Water-Gas Shift (RWGS) and Steam Reforming (SR), which occur together with DRM, resulting in a dramatic decrease of CO2 conversion and CO production, but a marked increase of H2 yield.