Search

Abstract The molecular profile of neurotrophic tyrosine kinase receptor (NTRK) gene fusions in lung adenocarcinoma (LUAD) is not fully understood. Next‐generation sequencing (NGS) and pan‐tyrosine kinase receptor (TRK) immunohistochemistry (IHC) are powerful tools for NTRK fusion detection. In this study, a total of 4,619 LUAD formalin‐fixed, paraffin‐embedded tissues were collected from patients who underwent biopsy or resection at the Shanghai Chest Hospital during 2017–2019. All specimens were screened for NTRK1 rearrangements using DNA‐based NGS. Thereafter, the cases with NTRK1 rearrangements and cases negative for common driver mutations were analyzed for NTRK1/2/3 fusions using total nucleic acid (TNA)‐based NGS and pan‐TRK IHC. Overall, four NTRK1/2 fusion events were identified, representing 0.087% of the original sample set. At the DNA level, seven NTRK1 rearrangements were identified, while only two TPM3‐NTRK1 fusions were confirmed on TNA‐based NGS as functional. In addition, two NTRK2 fusions (SQSTM1‐NTRK2 and KIF5B‐NTRK2) were identified by TNA‐based NGS in 350 ‘pan‐negative’ cases. Two patients harboring NTRK1/2 fusions were diagnosed with invasive adenocarcinoma, while the other two were diagnosed with adenocarcinoma in situ and minimally invasive adenocarcinoma. All four samples with NTRK fusions were positive for the expression of pan‐TRK. The two samples with NTRK2 fusions showed cytoplasmic staining alone, while the other two samples with NTRK1 fusions exhibited both cytoplasmic and membranous staining. In summary, functional NTRK fusions are found in early‐stage LUAD; however, they are extremely rare. According to this study's results, they are independent oncogenic drivers, mutually exclusive with other driver mutations. We demonstrated that NTRK rearrangement analysis using a DNA‐based approach should be verified with an RNA‐based assay.

In view of the frequent safety problems of electric vehicles, the research on accurately obtaining the rotor position of the motor through the resolver is an important means to improve the functional safety of the system. The commonly used resolver decoding method involves the resolver decoding chip method and software decoding method, but few studies integrate the two decoding methods. A single method of motor rotor position acquisition cannot meet the requirements of system functional safety. To fill this gap, this paper proposes a method to simultaneously integrate hardware decoding and software decoding in the motor control system. The decoding chip and software decoding obtain the angle data at the same time, and they provide redundancy to improve the functional safety of the electronic control system. Finally, the effectiveness of the proposed simultaneous operation of hardware decoding and software decoding is verified by experiments.

Nd 0.9 Ln 0.1 BaCo 2 O 6- δ (NLnBCO, Ln = La, Sm, Gd) materials are synthesized by EDTA-citrate method. The effects of rare earth element doping on crystal structure, thermal expansion behavior, electrical conductivity and electrochemical properties are investigated. Nd 0.9 Ln 0.1 BaCo 2 O 6- δ crystallizes in tetragonal symmetry with the space group P4/mmm. It is found that both the unit cell volume and the average valence of cobalt in NLnBCO increase, whereas the oxygen vacancy content (δ value) decreases with the gradual enlargement of the radius of the doped rare earth elements. XPS and O 2 -TPD results prove that the surface oxygen adsorption ability of NLnBCO improves gradually with the steady increase of Co4+ concentration in the material. The electrochemical impedance spectroscopy measurement results indicate that among the doped materials, Nd 0.9 La 0.1 BaCo 2 O 6- δ exhibits the lowest polarization resistance of 0.083 Ω cm2 at 700 °C in air. The anode-supported fuel cell constructed with this cathode shows a power output of 1.045 W cm−2 at 700 °C, and stable current density of 1.7 A cm−2 has been obtained with the load of 0.6 V for prolonged 100 h consecutive measurement. The rate limiting step of the oxygen reduction reaction (ORR) is the charge transfer process on Nd 0.9 La 0.1 BaCo 2 O 6- δ cathode. Our studies prove that doping La3+ with larger radius than Nd3+ is an effective way to promote the ORR reaction on NdBaCo 2 O 6- δ cathode. • The effects of rare earth element doping on the electrochemical properties of Nd 0.9 Ln 0.1 BaCo 2 O 6- δ are investigated. • La3+ doping improves the surface oxygen adsorption ability of Nd 0.9 Lan 0.1 BaCo 2 O 6- δ. • The anode-supported fuel cell constructed with Nd 0.9 Lan 0.1 BaCo 2 O 6- δ cathode shows a power output of 1.045 W cm−2 at 700 °C. [ABSTRACT FROM AUTHOR]