Search

Abstract This work presents an optically transparent and flexible MIMO antenna that features two square patch elements placed in close proximity, aiming to meet the demands of compactness, flexibility, optical transparency, and visual appeal for IoT applications and future 5G wireless communication. The design includes a simple offset fed configuration to achieve the required isolation and impedance matching. It simplifies the process of creating closely spaced transparent MIMO antenna configurations. By optimizing and analyzing this structure, the antenna achieves better isolation and diversity gain performance, even when the patch elements are positioned very close to each other. To achieve optical transparency and flexibility, the antenna uses thin polyethylene terephthalate (PET) material as a substrate, which is a thermoplastic polymer resin from the polyester family. The wired metal mesh parameters for conducting parts of the MIMO antenna and offset position of the feed are carefully optimized to achieve required optical transparency, isolation, impedance matching and radiation performance without any complex decoupling or impedance matching network.

This study examines the physical-layer security of an indoor visible light communication (VLC) system using spatial modulation (SM), which consists of several transmitters, an authorized receiver, and a passive adversary. The SM technique is applied at the transmitters so that only one transmitter is operational at any given time. A uniform selection (US) strategy is employed to choose the active transmitter. The two scenarios under examination encompass the conditions of non-negativity and average optical intensity, as well as the conditions of non-negativity, average optical intensity, and peak optical intensity. The secrecy rate is then obtained for these two scenarios while accounting for both signal-independent noise and signal-dependent noise. Additionally, the high signal-to-noise ratio (SNR) asymptotic behavior of the derived secrecy rate constraints is investigated. A channel-adaptive selection (CAS) strategy and a greedy selection (GS) scheme are utilized to select the active transmitter, aiming to enhance the secrecy performance. The current numerical findings affirm a pronounced convergence between the lower and upper bounds characterizing the secrecy rate. Notably, marginal asymptotic differentials in performance emerge at elevated SNRs. Furthermore, the GS system outperforms the CAS scheme and the US method, in that order. Additionally, the impact of friendly optical jamming on the secrecy rate is investigated. The results show that optical jamming significantly enhances the secrecy rate, particularly at higher power levels.

Abstract In this letter, a compact, planar circularly polarized (CP) sub-GHz slot-based multiple-input-multiple-output (MIMO) antenna with dual sense CP along with polarization bandwidth reconfigurability is presented. The pentagonal reactively loaded slot is fed by two folded tapered feedlines to achieve CP. The antenna offers left-hand-circular polarization (RHCP) with the as well as right hand circular polarization (LHCP). The antenna exhibit linearly polarization (LP) by exciting two ports simultaneously. Moreover, the antenna CP resonance can be reconfigured by varying the capacitance of the varactor diode. The antenna has a wide −10 dB operating frequency band from 578–929 MHz. while the axial ratio (AR) bandwidth ranges from 490–810 MHz. Moreover, the two elements MIMO are optimized and placed on compact dimensions 100 × 100 × 0.76 mm3 to realize pattern diversity. The antenna’s key characteristics are compact size, wide-band sub-GHz operation, dual sense CP, polarization bandwidth reconfigurability and good MIMO performance. Thus, it is a suitable candidate to be utilized in CubeSats applications in sub-GHz bands.

Switched filter banks find widespread application in frequency-hopping radar systems and communication networks with multiple operating frequencies, especially in situations demanding elevated filter element isolation. In this paper, the design and implementation of a highly isolated switchable narrow-bandpass filter bank architecture using hairpin microstrip topology is presented. The filter bank has four discrete bandpass filters with passbands of 2.0–2.2 GHz, 2.3–2.5 GHz, 3.1–3.3 GHz, and 3.9–4.1 GHz. These filters span the radar S-frequency band (2.0–4.0 GHz). In order to switch between channels with a switching speed of nanoseconds, low-loss and highly isolated SP4T switches are implemented. Advanced design system (ADS) software is used to design the various filter functionalities, and the entire system is tested on a vector network analyzer (VNA). The proposed architecture makes it much easier to put the filter bank into practice and switch it to the desired frequency, which is useful for radar receiver applications.

This paper presents a miniaturized broadband Bi-Yagi antenna array that covers a bandwidth from 1.79 GHz to 2.56 GHz. The proposed antenna achieves a tradeoff between maximizing bandwidth, effective area, and gain while minimizing physical dimensions. The antenna design considers the coupling between the radiator and director elements, resulting in increased bandwidth as the resonating modes shift apart. Additionally, the proposed design optimizes element spacing and dimensions to achieve high gain, wide bandwidth, efficient radiation, and a minimum aperture size. The proposed antenna, with physical dimensions of 138.6 mm × 47.7 mm × 1.57 mm, demonstrates gains ranging from 6.2 dBi to 9.34 dBi across the frequency range, with a total efficiency between 88% and 98%. The proposed design is experimentally validated by measuring the reflection coefficients, input impedance, gain, and normalized radiation pattern. These features make the antenna well suited for capturing and harvesting electromagnetic waves in mobile wireless and Wi-Fi applications.

This paper presents a novel circularly polarized rectenna designed for efficient electromagnetic energy harvesting at the 2.45 GHz ISM band. A compact antenna structure is designed to achieve high performance in terms of radiation efficiency, axial ratio, directivity, effective area, and harmonic rejection over the entire bandwidth of the ISM frequency band. The optimized rectifier circuit enhances the RF harvested energy efficiency, with an AC-to-DC conversion efficiency ranging from 36% to 70% for low-level input power ranging from −10 dBm to 0 dBm. The stable output of DC power confirms the suitability of this design for various practical applications, including wireless sensor networks, energy harvesting power supplies, medical implants, and environmental monitoring systems. Experimental validation, which includes both the reflection coefficient and radiation patterns of the designed antenna, confirms the accuracy of the simulation. The study found that the proposed energy harvesting system has a high total efficiency ranging from 53% to 63% and is well-suited for low-power energy harvesting (0 dBm) from ambient electromagnetic radiation. The proposed circularly polarized rectenna is a competitive option for efficient electromagnetic energy harvesting, both as a standalone unit and in an array, due to its high performance, feasibility, and versatility in meeting various energy harvesting requirements. This makes it a promising and cost-effective solution for various wireless communication applications, offering great potential for efficient energy harvesting from ambient electromagnetic radiation.

Since the CubeSats have become inherently used for the Internet of space things (IoST) applications, the limited spectral band at the ultra-high frequency (UHF) and very high frequency should be efficiently utilized to be sufficient for different applications of CubeSats. Therefore, cognitive radio (CR) has been used as an enabling technology for efficient, dynamic, and flexible spectrum utilization. So, this paper proposes a low-profile antenna for cognitive radio in IoST CubeSat applications at the UHF band. The proposed antenna comprises a circularly polarized wideband (WB) semi-hexagonal slot and two narrowband (NB) frequency reconfigurable loop slots integrated into a single-layer substrate. The semi-hexagonal-shaped slot antenna is excited by two orthogonal +/−45° tapered feed lines and loaded by a capacitor in order to achieve left/right-handed circular polarization in wide bandwidth from 0.57 GHz to 0.95 GHz. In addition, two NB frequency reconfigurable slot loop-based antennas are tuned over a wide frequency band from 0.6 GHz to 1.05 GH. The antenna tuning is achieved based on a varactor diode integrated into the slot loop antenna. The two NB antennas are designed as meander loops to miniaturize the physical length and point in different directions to achieve pattern diversity. The antenna design is fabricated on FR-4 substrate, and measured results have verified the simulated results.

A compact, conformal, all-textile wearable antenna is proposed in this paper for the 2.45 GHz ISM (Industrial, Scientific and Medical) band. The integrated design consists of a monopole radiator backed by a 2 × 1 Electromagnetic Band Gap (EBG) array, resulting in a small form factor suitable for wristband applications. An EBG unit cell is optimized to work in the desired operating band, the results of which are further explored to achieve bandwidth maximization via floating EBG ground. A monopole radiator is made to work in association with the EBG layer to produce the resonance in the ISM band with plausible radiation characteristics. The fabricated design is tested for free space performance analysis and subjected to human body loading. The proposed antenna design achieves bandwidth of 2.39 GHz to 2.54 GHz with a compact footprint of 35.4 × 82.4 mm2. The experimental investigations reveal that the reported design adequately retains its performance while operating in close proximity to human beings. The presented Specific Absorption Rate (SAR) analysis reveals 0.297 W/kg calculated at 0.5 W input power, which certifies that the proposed antenna is safe for use in wearable devices.

Abstract The theoretical analysis of transverse electric surface waves in ferrite medium surrounded by isotropic plasma layers is presented in this manuscript. Maxwell’s equations in differential form are used, and we impose the boundary conditions to acquire the dispersion relation to formulate the proposed structure. The influence of number density, separation distance between the layers of plasma, and dielectric permittivity of ferrite film on the normalized propagation constant is studied. It is concluded from the result obtained that if the number density and values of dielectric permittivity of ferrite film increases the propagation constant Re(β) tends to decreases whereas the increase in separation distance between the layers of plasma tends to increase the propagation constant Re(β). Furthermore, to verify the surface waves, the normalized field distribution for plasma medium as well as ferrite medium are also presented in this manuscript. The present work has potential applications in communication, drug delivery, cancer treatment, and ferrite sensing waveguide structures in the GHz frequency regime.

Non-orthogonal multiple access (NOMA) is an effective multiple access scheme that can be used to improve considerably the spectral efficiency of indoor downlink visible light communication (VLC) systems. However, NOMA suffers from inevitable multi-user interference which degrades the system performance. In this paper, a NOMA scheme is applied in a downlink VLC system and the impact of the multi-user interference on the system performance is studied. A closed-form expression for the user symbol error rate (SER) is derived and a decoding-order-based power allocation (DOPA) method is proposed to reduce the multi-user interference and find the optimal power allocation that minimizes the SER. The significance of the proposed schemes is demonstrated by simulation. The results show that the proposed DOPA method is able to reduce effectively the multi-user interference and provide more sum rate in comparison with benchmarking schemes such as the gain ratio PA (GRPA) and the normalized gain difference PA (NGDPA) methods.

In this paper, a folded slot-based multiple-input–multiple-output (MIMO) antenna design for Cube Satellite (CubeSat) applications is presented for the ultra-high frequency (UHF) band. A unique combination of a reactively loaded meandered slot with a folded structure is presented to achieve the antenna’s miniaturization. The proposed antenna is able to operate over a wide frequency band from 430~510 MHz. Moreover, pattern diversity is achieved by the antenna’s element placement, resulting in good MIMO diversity performance. The four elements are placed on one Unit (1U) for CubeSat dimensions of 100 mm × 100 mm × 100 mm. The miniaturized antenna design with pattern diversity over a wide operating band is well suited for small satellite applications, particularly CubeSats in the UHF band.

This paper proposes a dielectric slabs-based lens for millimeter-wave beamforming systems. The proposed lens is based on the graded steps of the effective refractive index of the semi-spherical lens. It consists of multiple dielectric slabs that match the selected gradient effective refractive index. These slabs have the same thicknesses and different radii. The slab thickness in this lens should not exceed a quarter of the operating wavelength to keep on a similar effective refractive index of the original semi-spherical lens. A horn antenna is used to examine the performance of the designed lens at 28 GHz frequency in terms of the maximum gain, sidelobe level, and 3 dB beamwidth. Sixteen switchable horn antennas are used to demonstrate lens capability for millimeter-wave beamforming. Every single antenna element is selected individually, thus the dielectric lens steers and enhances the corresponding radiation of the selected element in the desired direction.

Multiple-input multiple-output (MIMO) wireless technology in combination with orthogonal frequency-division multiplexing (MIMO-OFDM) is an attractive technique for next-generation wireless systems. However, the performance of wireless links is severely degraded due to various channel impairments which cause a decoding failure and lead to packet loss at the receiver. One technique to cope with this problem is the rateless space-time block code (RSTBC). This paper presents experimental results on the performance of a 2×2 MIMO-OFDM system with RSTBC as measured in a testbed implemented with field-programmable gate array (FPGA). The average bit error rate (BER) performance of the proposed scheme is evaluated experimentally, and the results agree closely with simulation and analytical upper bound. It has been shown that RSTBC can be implemented in real-world scenarios and guarantee the reliability of loss-prone wireless channels.

This paper presents a rateless space time block code (RSTBC) for massive MIMO systems. The paper illustrates the basis of rateless space time codes deployments in massive MIMO transmissions over wireless erasure channels. In such channels, data may be lost or is not decodable at the receiver due to a variety of factors such as channel fading, interference, or antenna element failure. We show that RSTBC guarantees the reliability of the system in such cases, even when the data loss rate is 25% or more. In such a highly lossy channel, the conventional fixed-rate codes fail to perform well, particularly when channel state information is not available at the transmitter. Simulation results are provided to demonstrate the BER performance and the spectral efficiency of the proposed scheme.

Objective: Drug poisoning is a globally common cause of emergency-room admissions. This study explores drug-poisoning prevalence patterns, associated risk factors (gender, age and exposure circumstances), and outcomes in western Saudi Arabia., Methods: Retrospective analysis of Clinical drug poisoning cases (2011-2016). The data were retrieved from the Saudi Ministry of Health's record and Patients' medical charts were analyzed., Results: The Ministry of Health received 1,474 reports of drug poisoning during 2011-2016. More than half involved females (n=885, 60%) or young children (0-4 years old) (n=764, 51.8%) and occurred accidentally (n=786, 53.3%); almost all had an oral route of poisoning (n=1,466, 99.5%). The cases most frequently involved analgesic and non-steroidal anti-inflammatory drugs (n=373, 25.2%); antiepileptic, antipsychotic, psychoactive, and anxiolytic drugs (n=229, 16.3%); antihistamine, asthma, flu, and cough drugs (n=157, 12.0%); and antibiotic, anti-fungal; and antiprotozoal drugs (n=74, 5.0%). Antidotes were administered in only 2.2% of cases, and no deaths were reported., Conclusion: The drug poisoning cases involved females and young children (younger than 5 years old) and the most cases were accidental, and the most commonly used drugs were analgesics (Panadol), followed by antipsychotics, antihistamines, and antiepileptics (Tegretol).