151 results on '"Akkerman, R."'
Search Results
2. Solid-State Additive Manufacturing of AA6060 Employing Friction Screw Extrusion Additive Manufacturing
3. Induction heating of unidirectional C/PAEK – A thermographic study on eddy current formation
4. Prediction of the in-plane permeability and air evacuation time of fiber-placed thermoplastic composite preforms with engineered intertape channels
5. A mesoscopic model for inter-yarn friction
6. A state-rate model for the transient wall slip effects in ply-ply friction of UD C/PAEK tapes in melt
7. Modeling anisotropic friction in triaxial overbraiding simulations
8. Rain droplet impact stress analysis for leading edge protection coating systems for wind turbine blades
9. Fatigue lifetime prediction model for leading edge protection coating systems of wind turbine blades
10. Modeling the effect of temperature and pressure on the peak and steady-state ply–ply friction response for UD C/PAEK tapes
11. Modeling of yarn interactions for non-axisymmetric biaxial overbraiding simulations
12. Liquid droplet impact pressure on (elastic) solids for prediction of rain erosion loads on wind turbine blades
13. Prediction of the peak and steady-state ply–ply friction response for UD C/PAEK tapes
14. Characterization of the water–titanium interaction and its effect on the adhesion of titanium-C/PEKK joints
15. The level and distribution of methyl-esters influence the impact of pectin on intestinal T cells, microbiota, and Ahr activation
16. The role of process induced polymer morphology on the fracture toughness of titanium–PEKK interfaces
17. Intradermal Administration of Influenza Vaccine with Trehalose and Pullulan-Based Dissolving Microneedle Arrays
18. β(2→6)-Type fructans attenuate proinflammatory responses in a structure dependent fashion via Toll-like receptors
19. Effect of in-plane fiber waviness defects on the compressive properties of quasi-isotropic thermoplastic composites
20. Tool-ply interaction in the formation of waviness during C/PEEK consolidation
21. Real-time observation of waviness formation during C/PEEK consolidation
22. Efficient analysis of dense fiber reinforcement using a reduced embedded formulation
23. The influence of physical ageing on the in-plane shear creep compliance of 5HS C/PPS
24. A level-set-based strategy for thickness optimization of blended composite structures
25. Deconsolidation of C/PEEK blanks: on the role of prepreg, blank manufacturing method and conditioning
26. A critical review on recycling of end-of-life carbon fibre/glass fibre reinforced composites waste using pyrolysis towards a circular economy
27. Deformability of a woven fabric modified with in-situ grown nanofibres
28. Biorefinery of the macroalgae Ulva lactuca: extraction of proteins and carbohydrates by mild disintegration
29. Friction surface cladding: An exploratory study of a new solid state cladding process
30. Ultrasonic measurements of undamaged concrete layer thickness in a deteriorated concrete structure
31. Nonlinear dynamic behavior of an impact damaged composite skin–stiffener structure
32. Corrigendum to “Prediction of the peak and steady-state ply–ply friction response for UD C/PAEK tapes” [Compos. Part A: Appl. Sci. Manuf. 163 (2022) 107185]
33. Frictional behaviour of high performance fibrous tows: A contact mechanics model of tow–metal friction
34. Strain direction dependency of martensitic transformation in austenitic stainless steels: The effect of [formula omitted]
35. Delamination in carbon-fibre composites improved with in situ grown nanofibres
36. Critical assessment of the mandrel peel test for fiber reinforced thermoplastic laminates
37. Non-collinear wave mixing for non-linear ultrasonic detection of physical ageing in PVC
38. A lubrication approach to friction in thermoplastic composites forming processes
39. Vibration based Structural Health Monitoring of a composite T-beam
40. A multi-layer triangular membrane finite element for the forming simulation of laminated composites
41. Inkjet printing and adhesion characterisation of conductive tracks on a commercial printed circuit board material
42. An attempt to use scratch tests to predict the residual lifetime of unplasticised poly(vinyl chloride) pipes
43. Solutions to intra-ply shear locking in finite element analyses of fibre reinforced materials
44. Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results
45. Delamination detection with fibre Bragg gratings based on dynamic behaviour
46. Finite Element Simulations of Laminated Composites Forming Processes
47. Weld Strength Assessment for Tape Placement
48. Design of an experimental setup to measure tool-ply and ply-ply friction in thermoplastic laminates
49. Multi-scale effects in the consolidation of thermoplastic laminates
50. Tool-ply friction in thermoplastic composite forming
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.