Search

Genipin gel dosimeters are hydrogels infused with a radiation-sensitive material which yield dosimetric information in three dimensions (3D). The effect of inorganic salts and glucose on the visible absorption dose–response, melting points and mass density of genipin gel dosimeters has been experimentally evaluated using 6-MV LINAC photons. As a result, the addition of glucose with optimum concentration of 10% (w/w) was found to improve the thermal stability of the genipin gel and increase its melting point ( T m ) by 6 °C accompanied by a slight decrease of dose–response. Furthermore, glucose helps to adjust the gel mass density to obtain the desired tissue-equivalent properties. A drop of T m was observed when salts were used as additives. As the salt concentration increased, gel T m decreased. The mass density and melting point of the genipin gel could be adjusted using different amounts of glucose that improved the genipin gel suitability for 3D dose measurements without introducing additional toxicity to the final gel. [ABSTRACT FROM AUTHOR]

In this study, some characteristics of Rhizophora spp. particleboards bonded with Serishoom (traditional animal-based adhesive) as a phantom material was investigated. The Rhizophora spp. particleboards were fabricated in two Serishoom adhesive treatment levels (6% and 12%) with three Rhizophora spp. particle sizes (≤ 149 µm, 149 µm - 500 µm, and 500 µm - 1000 µm) at 1 g.cm-3 of the target density. The internal bond strength and the dimensional stability of the Serishoom-bonded Rhizophora spp. particleboards were improved by using the smaller Rhizophora spp. particle size and the higher Serishoom adhesive treatment level. The effective atomic numbers of the Serishoom-bonded Rhizophora spp. particleboards were determineted to be 7,56 to 7,58 by an energy dispersive X-ray, which is in good agreement with those of water and breast tissue. In addition, the density distribution profiles of the fabricated Serishoom-bonded Rhizophora spp. particleboards were determined by the Kriging method with the use Surfer8 computer software, which indicated that there was good density homogeneity throughout the Serishoom-bonded Rhizophora spp. particleboards. The results showed a potential of the Serishoom-bonded Rhizophora spp. particleboard bonded with Serishoom to be used as a phantom material. [ABSTRACT FROM AUTHOR]