Search

The American cockroach, Periplaneta americana (Linnaeus, 1758) (Blattodea: Blattidae), is one of the most common pests that thrive in diverse environments and carries various pathogens, causing critical threats to public health and the ecosystem. We thus report in this study the first observation of decapitated American cockroaches as a result of infestation with scuttle fly parasitoids. Interestingly, behavioral alterations in the form of zombification-like behavior could be observed in cockroaches reared in the laboratory before being decapitated, implying that the insect targets cockroach heads. To identify this parasitoid, cockroaches' corpora were isolated in jars, and apodous larvae were observed. Larvae developed into small coarctate pupae, and adults emerged. The scuttle flies were collected and exhibited tiny black, brown, to yellowish bodies. The fly was initially identified based on its morphological properties as a member of the order Diptera, family Phoridae. To provide further insights into the morphological attributes of the phorid species, the fly was examined using a scanning electron microscope (SEM) and then identified as Megaselia scalaris accordingly. SEM analysis revealed the distinctive structure of M. scalaris concerning the head, mouth parts, and legs. Specifically, the mouth parts include the labrum, labellum, rostrum, and maxillary palps. Although further investigations are still required to understand the complicated relationships between M. scalaris and American cockroaches, our findings provide a prominent step in the control of American cockroaches using M. scalaris as an efficient biological control agent. [ABSTRACT FROM AUTHOR]

Measurements of transport phenomena are constantly plagued by contact resistance, prohibiting the sample's intrinsic electrical or thermal conductivity from being accurately determined. This predicament is particularly severe in thermal transport measurements due to the inability to meet similar impedance requirements for a four-probe method used in electrical resistance measurements. Here, we invent a three-probe measurement method that makes an accurate determination of thermal conductivity possible for nanomaterials. Incorporating electron beam heating provided by a scanning electron microscope (SEM) on a diffusive thermal conductor not only quantifies the thermal contact resistance, which may introduce an error of more than 270% to a sample's thermal conductivity, but also eliminates several device uncertainties that may contribute an additional 17% error in a measurement. The method also enables local temperature measurements, revealing nanoscale structural variations unfound by SEM. The high accuracy of the technique would make standardization of nanoscale thermal transport measurement possible. [ABSTRACT FROM AUTHOR]

Bismuth telluride (Bi2Te3), due to its thermoelectric properties, is an interesting semiconducting material for optoelectronics and energy conversion devices; still, it has limited stability and durability. Under high pressure, we can fine-tune its performance, potentially enhancing its capabilities. The presented work uses the semi-automatic Reddy tube to explore the behavior of bismuth telluride under dynamic pressure. Commercially available bismuth telluride was purchased and subjected to different numbers of shock pulses of 100, 200, 300, and 400 with 2 MPa transient pressure and 864 K transient temperature. XRD, Raman, UV-DRS, PL, and SEM were used to characterize Bi2Te3 and shock-loaded Bi2Te3. The XRD and Raman study confirms that the Bi2Te3 underwent phase transition from Bi2Te3 to Bi4Te5 (rhombohedral to hexagonal) at 300 shock pulses. The optical property of Bi2Te3 was determined using UV-DRS and PL; the bandgap and PL intensity changed with respect to the number of shock pulses. A scanning electron microscope was used to analyze sample morphology. Our findings reveal the reversible phase transition of bismuth telluride from Bi2Te3 to Bi4Te5 under dynamic shock waves, something that has not been reported earlier. Using traditional synthesis methods, Bi4Te5 consume a lot of time, leading to impurities and problems of sample quality. Our results reveal that a rapid and reversible phase transition and unique response to dynamic shock waves will allow excellent technological applications without requiring lengthy and complex synthesis methods, offering enhanced stability and potential advancements in energy conversion devices. The process detailing how shock waves initiate the phase transition is explained. [ABSTRACT FROM AUTHOR]

Nucleic acid modifications have attracted increasing attention in recent years since they have been found to be related to a number of diseases including cancer. Previous studies have shown that the early development of endometrial cancer (EC) is often accompanied by changes in methylation levels of related genes, and the expression of related proteins that regulate reactive oxygen species (ROS) shows significant differences in EC cells and tissues. However, it has not been reported whether nucleic acid modifications related to methylation or ROS can serve as biomarkers for EC. Accurate quantification of these nucleic acid modifications still has challenges because their amounts in urine are very low and the interferences in urine are complicated. In this study, a novel dispersive solid-phase extraction (DSPE) method based on chitosan-carbon nanotube-Al2O3 (CS-CNT-Al2O3) has been established for the analysis of 5-hydroxymethyluracil (5 mU), 5-methyl-2′-deoxycytidine (5-mdC), 5-hydroxymethyl-2′-deoxycytidine (5-hmdC), 5-formyl-2′-deoxycytidine (5-fdC), and 8-hydroxy-2′-deoxyguanosine (8-OHdG) in EC patient urine samples coupled with UHPLC-QE-Orbitrap-MS/MS and HPLC–UV. Firstly, the synthesis of the CS-CNT-Al2O3 nanocomposite was conducted by a sono-coprecipitation method and was characterized by scanning electron microscope (SEM), energy dispersive spectrometer (EDS), and Fourier transform infrared (FTIR). Under the optimal extraction conditions of DSPE, we successfully quantified 5 mU, 5-mdC, 5-hmdC, 5-fdC, and 8-OHdG in urine samples from 37 EC patients and 39 healthy controls. The results showed that there were significant differences in the levels of 5-mdC, 5-hmdC, 5-fdC, and 8-OHdG in EC patients compared to the healthy control group. The receiver operator characteristic (ROC) curve analysis was carried out to evaluate the potential of 5-mdC, 5-hmdC, 5-fdC, and 8-OHdG to distinguish EC patients from healthy volunteers. The area under the curve (AUC) for 5-mdC, 5-hmdC, 5-fdC, and 8-OHdG was 0.7412, 0.667, 0.8438, and 0.7981, respectively. It indicated that 5-mdC, 5-hmdC, 5-fdC, and 8-OHdG had certain potential in distinguishing between EC patients and healthy volunteers and they could act as potential non-invasive biomarkers for early diagnosis of EC. Moreover, the present study would stimulate investigations of the effects of nucleic acid modifications on the initiation and progression of EC. [ABSTRACT FROM AUTHOR]

Lead-free antiferroelectric AgNbO3 ceramics have garnered extensive attention due to their rapid charge/discharge capabilities and environmentally friendly nature, holding immense potential for energy storage applications. However, the practical utilization of AgNbO3 has been hindered by its low energy storage density. This study employed an A/B-site co-doping strategy, which yielded positive effects on the energy performance of AgNbO3 ceramics. By modifying the A/B-sites with equivalent amounts of Bi3+ and Y3+ ions, enhanced maximum polarization, improved breakdown field, and slimmer hysteresis loops were simultaneously achieved, as the combined effects of refined grain size, wider optical bandgap, and randomly distributed antiferroelectric nanodomains, which were verified through the scanning electron microscope, transmission electron microscope, and ultraviolet–visible spectrum. As a consequence, a high energy storage density of 5.40 J/cm3 accompanied by an energy storage efficiency of 56.5% was achieved in the Ag0.97Bi0.01Nb0.994Y0.01O3 ceramic under a relatively low electric field of 190 kV/cm. This study underscores the effectiveness of A/B-site aliovalent co-doping as a viable strategy for developing high-performance ceramic capacitors for energy storage applications. [ABSTRACT FROM AUTHOR]

Compared with cold spraying and electroplating, laser cladding is also an efficient and reliable surface modification technique to prepare pure copper coating, yet with uniqueness such as the combination of forming metallurgical bonding with substrate and high deposition rate. As such, pure copper coating with different overlap rates was successfully prepared on the Q245R substrate. The surface quality, defects quantity, phase composition, grain orientation, and corrosion behavior were investigated by surface profiler, scanning electron microscope, energy dispersive spectrometer, X-ray diffraction, electron backscattered diffraction, and electrochemical analysis. As the overlap rate increases, the surface roughness decreases then increases, and the pores and unfused defects disappear then reappear. The grain formation changes from columnar to equiaxed crystals and then to columnar crystals, with the orientation of grains shifting from 100 to 101 direction. Further analysis revealed that the pure copper coating with a 70% overlap rate possesses fewer pores, unfused defects, and no interfacial cracks, thus the best compactness. Moreover, the pure copper coating with a 70% overlap rate in 3 mol/L NaCl solution exhibits the best corrosion resistance. [ABSTRACT FROM AUTHOR]

Shellac, a naturally degradable material, was used as a carrier to load some functional and active compounds in the packaging fields. It is rarely used directly as a substrate to prepare packing films due to its unsatisfactory solubility and mechanical properties. In this research, ammonia was used as a solvent to dissolve shellac which helped form a smooth and tough shellac film via the interaction between shellac and ammonia. Moreover, a shellac composite film was formed by additional cellulose nanofibers (CNF). The properties of the shellac composite films (SAmCxPS) were regulated by modulating the concentrations of ammonia and CNF. The prepared films were characterized by a scanning electron microscope (SEM), NanoS Zetasizer, thermogravimetric analysis (TGA), and UV-Vis spectrophotometer, and their tensile strength was also determined. The results revealed that the shellac composite films were successfully prepared and were very thermally stable. The maximum tensile stress of the shellac composite films with 0.9 wt% CNF could reach 20.5 MPa. Such a high tensile stress indicated significantly improved mechanical properties. Moreover, the shellac composite films also showed good UV barrier properties, which reduced the ripeness of the fruit. Overall, the improvement in the stability and mechanical and UV barrier properties of shellac can broaden its application in the field of packaging. [ABSTRACT FROM AUTHOR]

Glass fiber‐reinforced resin matrix composites have good mechanical and impact resistance properties, while with particle co‐reinforcement, a synergistic effect can further improve their performance. In this paper, continuous glass fiber‐reinforced nylon 6 (GF/PA6) and continuous glass fiber (GF) with glass beads (GBs) co‐reinforced nylon 6 (GB–GF/PA6) were prepared to investigate the co‐reinforcement mechanism and the synergistic effect of particle and fiber. A quantitative parameter of the residual impact force divided by the critical force Pr/Pcr, as the damage degree of the low‐velocity impact, is defined to evaluate the impact resistance of the composite. The results indicate that the damage of GB–GF/PA6 was lower than that of GF/PA6, and the synergistic effect reaches the most obvious at the GB addition of 10 wt%. Scanning electron microscope (SEM) and x‐ray computed tomography (XCT) images disclose that GB impedes the type II crack spread in the matrix and fiber/matrix interface. With the type II cracks reducing, the materials' resistance to delamination can be significantly enhanced. For the composite structure, in which 10 wt% GB and 60 wt% GF are introduced, the flexural strength, shear strength, and pendulum impact strength were tested with the maximum values of 379.4 MPa, 53.1 MPa, and 219.0 J/m2, respectively. This composite structure design, presenting a continuous GF and GBs co‐reinforce effect, offers a manufacturing process that is easily scalable to achieve excellent characteristics. [ABSTRACT FROM AUTHOR]

Manufacturing and investigating metallic‐glass‐fiber‐reinforced epoxies is an important new attempt to present their potential to contribute to the aviation industry. In order to explore the energy absorption in novel CoFeSiB metallic‐glass‐fiber/epoxy resin composites, CoFeSiB/epoxy resin composite cylinders with different fiber volume fractions were prepared by a hot‐pressing method. The amorphism of the metal fibers was analyzed using x‐ray diffraction. The quasi‐static compression tests were performed on different fiber oriented samples with a diameter of 3.6 mm and a height of 7.2 mm. The sample with the fiber orientation [0°/90°] has a higher energy absorption capacity, compared to the one with the fiber orientation [0°/0°]. The dynamic‐ compression tests were performed on the [0°/0°] samples with a diameter of 3 mm and height of 6 mm at different air pressures. The compression fracture surfaces were examined by scanning electron microscope. Then the energy absorption mechanism of the composites was investigated. This study is of great significance for the energy absorption in amorphous metal fiber/epoxy composites. [ABSTRACT FROM AUTHOR]

High-performance Sr 0.99 La 0.01 TiO 3 ceramics were synthesized using a conventional solid-phase method, and Sr 0.99 La 0.01 TiO 3 percolated (SLT10-P) samples with excellent resistivity were obtained by coating with an oxidant and heat treatment. In this work, simultaneous excellent dielectric properties (16667 of dielectric permittivity, 0.016 of loss tangent at 1 kHz) and high resistivity (1.44 × 1011 Ω·cm at DC100V) was achieved in SLT10-P ceramics at room temperature by modulating the duration of thermal treatment. X-ray Diffraction and scanning electron microscope analyses proved the diffusion of the oxidant in the grains and grain boundaries during the heat treatment. The increase in grain boundary resistance is mainly due to the fact that the insulating layer formed by the oxide ions entering the grain boundary hinders the long-range movement of electrons. In addition, the diffusion of oxygen from the air into the ceramic during the heat treatment process also contributes to the insulation of grain boundaries. [ABSTRACT FROM AUTHOR]

The performance of apparently biocompatible implanted bovine bone grafts may be compromised by unresolved chronic inflammation, and poor graft incorporation leading to implant failure. Monitoring the intensity and duration of the inflammatory response caused by implanted bone grafts is crucial. In this study, the ability of demineralized (DMB) and decellularized (DCC) bovine bone substitutes in initiating inflammatory responses to peripheral blood monocyte-derived macrophages (PBMMs) was investigated. The response of PBMMs to bone substitutes was evaluated by using both direct and indirect cell culture, reactive oxygen species (ROS) generation, apoptosis, immunophenotyping, and cytokine production. Analysis of DMB and DCC substitutes using scanning electron microscope (SEM) showed a roughened surface with a size ranging between 500 and 750 μm. PBMMs treated with DMB demonstrated cell aggregation and clumping mimicking lipopolysaccharide (LPS) treated PBMMs and a higher proliferation ability (166.93%) compared to control (100%) and DCC treatments (115.64%; p<0.001) at 24h. This was associated with a significantly increased production of intracellular ROS in PBMMs exposed to DMB substitutes than control (3158.5 vs 1715.5; p<0.001) and DCC treatment (2117.5). The bone substitute exposure also caused an increase in percentage apoptosis which was significantly (p<0.0001) higher in both DMB (27.85) and DCC (29.2) treatment than control (19.383). A significant increase in proinflammatory cytokine expression (TNF-α: 3.4 folds; p<0.05) was observed in DMB substitute-treated PBMMs compared to control. Notably, IL-1β mRNA was significantly higher in DMB (21.75 folds; p<0.0001) than control and DCC (5.01 folds). In contrast, DCC substitutes exhibited immunoregulatory effects on PBMMs, as indicated by the expression for CD86, CD206, and HLDR surface markers mimicking IL-4 treatments. In conclusion, DMB excites a higher immunological response compared to DCC suggesting decellularization process of tissues dampen down inflammatory reactions when exposed to PBMM. [ABSTRACT FROM AUTHOR]

This study investigated the suitability of recycled asphalt pavement and polyethylene wastes as coarse aggregate in asphaltic concrete by evaluating the impact of the use of polyethylene polymer wastes and recycled asphalt pavement composite as aggregates on the physical and mechanical properties of the asphaltic concrete. The physical characteristics of the aggregate and bitumen were determined using relevant parametric tests. Recycled asphalt pavement was used to make asphaltic concrete samples using LDPE at 5%, 10%, 15%, RAP at 5% and HDPE at 5%, 10%, 15%, and a mixture of LDPE + HDPE at 5+5%, 7.5+7.5% and 10+10% RAP at 5% as additives. Marshall Stability test was conducted to assess the mechanical strength of the asphaltic concrete, and the results included information on the aggregate's stability, flow, density, voids filled with bitumen, voids filled with air, and voids in mineral aggregate. In addition, the surface and crystal structure of the aggregates was studied by carrying out a microscopic examination with a Scanning Electron Microscope (SEM) and X-Ray diffraction (XRD). The results obtained from this study demonstrated that RAP, HDPE & LDPE are viable conventional aggregate substitute for asphalt concrete production. [ABSTRACT FROM AUTHOR]

In recent years, advances in materials engineering based on adaptive electronics have found a new paradigm to optimize drawbacks in signal processing. A two-layer MnO/ZnO:Zn heterostructure envisioned for frequency adaptive electronic signal processing is synthesized by sputtering, where the use of internal states allows reconfigurability to obtain new operating modes at different frequency input signals. X-ray diffraction (XRD) analysis is performed on each layer, revealing a cubic structure for MnO and a hexagonal structure for ZnO:Zn with preferential growth in [111] and [002] directions, respectively. Scanning electron microscope (SEM) micrographs show that the surface of both materials is homogeneous and smooth. The thickness for each layer is determined to be approximately 106.3 nm for MnO, 119.3 nm for ZnO:Zn and 224.1 nm for the MnO/ZnO:Zn structure. An electrical characterisation with an oscilloscope and signal generator was carried out to obtain the time-response signals and current-voltage (I–V) curves, where no degradation is detected when changing frequencies within the range of 100 Hz to 1 MHz. An equivalent circuit is proposed to explain the effects in the interface. Measurements of switching speeds from high resistance state (HRS) to low resistance state (LRS) at approximately 17 ns, highlight the device's rapid adaptability, and an estimated switching ratio of approximately 2 × 104 indicates its efficiency as a memristive component. Finally, the MnO/ZnO:Zn heterojunction delivers states that are stable, repeatable, and reproducible, demonstrating how the interaction of the materials can be utilised in adaptive device applications by applying frequencies and internal states to create new and innovative design schematics, thus reducing the number of components/connections in a system for future sustainable electronics. [ABSTRACT FROM AUTHOR]

Based on a novel phenylacetylene capped polyimide (PI) with unique high-temperature resistance, its curing kinetics and thermal decomposition behavior were investigated. The curing mechanism and kinetics were studied by differential scanning calorimetry (DSC), and the activation energy (Ea) and pre-exponential factor (A) of the curing reaction were calculated based on the Kissinger equation, Ozawa equation, and Crane equation. According to the curve of conversion rate changing with temperature, the relationship between the dynamic reaction Ea and conversion rate (α) was calculated by the Friedman equation, Starink equation, and Ozawa–Flynn–Wall (O-F-W) equation, and the reaction Ea in different stages was compared with the results of molecular dynamics. Thermogravimetric analysis (TGA) and a scanning electron microscope (SEM) were used to analyze the thermal decomposition behavior of PI resins before and after curing. Temperatures at 5% and 20% mass loss (T5%, T20%), peak decomposition temperature (Tmax), residual carbon rate (RW), and integral process decomposition temperature (IPDT) were used to compare the thermal stability of PI resins and cured PI resins. The results display that the cured PI has excellent thermal stability. The Ea of the thermal decomposition reaction was calculated by the Coats–Redfern method, and the thermal decomposition behavior was analyzed. The thermal decomposition reaction of PI resins at different temperatures was simulated by molecular dynamics, the initial thermal decomposition reaction was studied, and the pyrolysis mechanism was analyzed more comprehensively and intuitively. [ABSTRACT FROM AUTHOR]

The aim of this research is to investigate basalt as a natural mineral-based fibre together with a vitrimeric resin as a sustainable alternative to standard composite materials. Vitrimers combine the properties of thermoset and thermoplastic polymers, enabling the repair of specimens and hence prolonging the lifetime of the composite material. The micro-mechanical characteristics between the basalt fibres and the vitrimer resin are reported and shown to match those of a standard Skyflex K51 epoxy resin. Discontinuous (4 mm) basalt fibres were employed to produce aligned discontinuous fibre-reinforced composites (ADFRCs) using the high-performance discontinuous fibre (HiPerDiF) technology. The mechanical characteristics of the laminates were investigated through tensile testing and the fracture zones were analysed under a scanning electron microscope. By normalising the results by their respective fibre volume fraction, it was discovered that the vitrimer–basalt ADFRCs exhibited, on average, a 4% higher strength and a 25% higher stiffness compared to their basalt epoxy counterparts. The repair potential of the vitrimer ADFRC specimens was explored during low-temperature compression repair. Two approaches were tested using double-sided local- and full-patch repair. Both successfully recovered a significant amount of their prime strength. In conclusion, the potential of the sustainable vitrimer–basalt composite is shown by its competitive mechanical performance. Combining this with the manufacturing flexibility, repair potential, and recyclability of the material, the vitrimer–basalt composite seems to be a competitive alternative to standard glass epoxies. [ABSTRACT FROM AUTHOR]

Polymers generally form incompatible mixtures that make the process of recycling difficult, especially the mechanical recycling of mixed plastic waste. One of the most commonly used films in the packaging industry is multilayer films, mainly composed of polyethylene (PE) and polyamide (PA). Recycling these materials with such different molecular structures requires the use of compatibilizers to minimize phase separation and obtain more useful recycled materials. In this work, commercial polyisoprene–graft–maleic anhydride (PI-g-MA) was tested as a compatibilizer for a blend of PE and PA derived from the mechanical recycling of PE/PA multilayer films. Different amounts of PI-g-MA were tested, and the films made with 1.5% PI-g-MA showed the best results in terms of mechanical properties and dart impact. The films were also characterized thermally via thermogravimetric analysis (TG) and differential scanning calorimetry (DSC), using Fourier-transform infrared spectroscopy (FTIR), and morphologically using a scanning electron microscope (SEM). Other parameters, such as tearing and perforation, were analyzed. [ABSTRACT FROM AUTHOR]

Introduction: We compared the effects of heat on the physicochemical properties of recently developed calcium silicate-based sealers (CSBSs), including BioRoot Flow, BioRoot RCS, and AH Plus Bioceramic sealer, with those of the epoxy-resin-based sealer (ERBS) AH Plus. Methods: The flow, film thickness, setting time, and solubility of sealers were evaluated at 37 °C and 100 °C using ISO 6876/2012. Furthermore, pH and calcium ion release were evaluated at these temperatures. In addition, the mass change in sealers at a high temperature was assessed via thermogravimetric analysis. Then, the chemical composition and components of the sealers were analyzed using a scanning electron microscope and Fourier-transform infrared spectroscopy (FTIR). Results: BioRoot Flow, AH Plus Bioceramic, and AH Plus complied with ISO standards in terms of flow and film thickness, both before and after heat application. However, BioRoot RCS exhibited significantly increased film thickness at 100 °C. The setting times of all sealers were significantly reduced at 100 °C. The solubility of CSBS was >3%, exceeding the ISO 6876/2012 standard, both before and after heat exposure. Conversely, the solubility of AH Plus complied with the standard, regardless of the thermal condition. For 4 weeks, CSBS showed a significantly higher pH than AH Plus at both 37 °C and 100 °C. After heat treatment, calcium release decreased in Bioroot RCS and BioRoot Flow, while AH Plus showed no significant differences before and after treatment. However, CSBS consistently exhibited significantly higher calcium release than AH Plus at both temperatures. An FTIR analysis revealed that the chemical composition of the sealers did not change at the high temperature, whereas a thermogravimetric analysis demonstrated a >5% weight reduction in CSBS and a 0.005% weight reduction in AH Plus at 100 °C. Conclusions: BioRoot Flow, AH Plus Bioceramic, and AH Plus possess favorable physicochemical properties, which make them suitable for application under thermal conditions. At a high temperature, BioRoot RCS did not exhibit changes in its chemical composition. However, its film thickness was increased, and pH and solubility were reduced. Therefore, caution is needed when it is applied at high temperatures, such as during the warm obturation technique. [ABSTRACT FROM AUTHOR]

Microplasmas can be used for a wide range of technological applications and to improve the understanding of fundamental physics. Scanning electron microscopy, on the other hand, provides insights into the sample morphology and chemistry of materials from the mm‐ down to the nm‐scale. Combining both would provide direct insight into plasma‐sample interactions in real‐time and at high spatial resolution. Up till now, very few attempts in this direction have been made, and significant challenges remain. This work presents a stable direct current glow discharge microplasma setup built inside a scanning electron microscope. The experimental setup is capable of real‐time in situ imaging of the sample evolution during plasma operation and it demonstrates localized sputtering and sample oxidation. Further, the experimental parameters such as varying gas mixtures, electrode polarity, and field strength are explored and experimental V–I curves under various conditions are provided. These results demonstrate the capabilities of this setup in potential investigations of plasma physics, plasma‐surface interactions, and materials science and its practical applications. The presented setup shows the potential to have several technological applications, for example, to locally modify the sample surface (e.g., local oxidation and ion implantation for nanotechnology applications) on the µm‐scale. [ABSTRACT FROM AUTHOR]

Today, increasing dyes pollution is of great importance for life. Leaving the dyes used in industries such as textiles without being discharged pollutes other water sources. In order to prevent this, different methods are used in the literature. In this study, SrAl2B2O7, a borate metal, was used to remove methyl blue (MB), an anionic dye, by batch adsorption method. Strontium aluminoborate (SrAl2B2O7) was prepared using a solution combustion method at 950 °C for 4 h in air. The prepared adsorbent was characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). The particle morphology of the adsorbent was investigated using scanning electron microscope (SEM). By using N2 adsorption–desorption, the Brunnauer, Emmet, and Teller (BET) specific surface area was found to be 1.9578 m2 g−1. The surface charge of the dye-adsorbed SrAl2B2O7 was determined based on zeta-potential measurements. Langmuir (R2=0.9897), Freundlich (R2=0.985), Dubinin & Radushkevic (R2=0.976), Scatchard (R2=0.881), Temkin & Pyzhev (R2=0.978) isotherms were calculated in the study. SrAl2B2O7 showed good adsorption performance for methyl blue (MB) with maximum adsorption capacities of 29.069 mg g−1 (Langmuir). Adsorption processes were also studied in detail. Thermodynamic and kinetic models; pseudo-first-order (R2=0.415), pseudo-second-order (R2=0.999), Elovich (R2=0.968) showed that adsorption using SrAl2B2O7 in MB removal is endothermic and pseudo-second order. [ABSTRACT FROM AUTHOR]

A pair of polyaniline (PANIs) samples was prepared from HCl or H2SO4 electrolytes containing 0.01 M of aniline, and then subjecting them to electropolymerization. The morphology, structure, and properties of the samples were characterized using scanning electron microscope, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. The results demonstrate that the capacitance and morphology of the product depend exclusively on the reactive medium used. The PANI was used as a material electrode in a supercapacitor, and the electrochemical performance of the elaborated electrodes was evaluated using cyclic voltammetry, galvanostatic charge/discharge measurement, and electrochemical impedance spectroscopy. The optimal results for the specific capacitance of the PANI films were achieved under a 5-mVs−1 scan rate, ranging from 410.35 F/g for the FTO/PANI-H2SO4 to 758.72 F/g for the FTO/PANI-HCl. [ABSTRACT FROM AUTHOR]

Hydraulic fracturing effectively enhances production in the unconventional oil and gas industry. As we all know, proppant plays a vital role in the hydraulic fracturing. In this paper, the effects of proppant type, particle size, concentration, closure pressure, and other factors are studied by laboratory experiments. Based on the actual triaxial simulation device (TSD), quartz sand, ceramic, and coated sand are used as proppant, while sandstone, coal rock, shale, and granite are selected as the stone slate to experiment. The surface of the proppant was imaged by a surface profiler (SP) and scanning electron microscope (SEM) to compare the microscopic surface characteristics before and after the experiment. The particle size macroscopic distribution was measured by Mastersizer 2000. The results and innovation are as follows: This paper investigates the proppant crushing for hydraulic fracturing and provides an alternative evaluation method for proppant selection. The crushing laws of proppant under different pressures and stone slate are compared by using the experimental device. It is reliable for quartz sand to replace ceramic in deep layer of the field application. It also overturns the previous thinking. We believe this found holds the key toward systematically optimizing the development of unconventional reservoirs. [ABSTRACT FROM AUTHOR]

Nitrogen dioxide (NO 2) exposure can have several adverse health impacts on people, especially the respiratory system. Low selectivity, a lack of long-term stability, and structural and morphological optimization are some challenges associated with using ZnO for NO 2 gas sensing. Therefore, we intended copper (Cu) doping in ZnO to alter its shape and gas-sensing characteristics. This study explores the synthesis, properties, and gas-sensing capabilities of bitter gourd-shaped Cu-doped zinc oxide (ZnO) nanostructures for the detection of nitrogen dioxide (NO 2). A facile hydrothermal synthesis method was employed to synthesize bitter gourd-shaped Cu-doped ZnO nanostructures and comprehensively characterized by several techniques. Comprehensive characterizations of our produced Cu-doped ZnO nanomaterial demonstrated by X-ray diffraction (XRD), Scanning electron microscope (SEM), Energy-dispersive X-ray spectroscopy (EDS), and different energy spectrum. The material was annealed at 400 °C in a controlled dry air environment to improve its suitability for gas sensor applications. A series of temperature-ranging experiments were conducted to get gas-sensing readings from 25 °C to 300 °C. The resulting sensor, founded upon the distinctive morphology of Cu-doped ZnO structures reminiscent of the intricate shape of bitter gourd, unveiled good selectivity with a pronounced affinity for detecting NO 2 gas. Notably, the zenith of its performance was attained at an operating temperature of 200 °C, where its selectivity and sensitivity were most pronounced. Even at a low concentration of 1 ppm, the sensors displayed a maximum response of 3.7, highlighting their high sensitivity. The sensors demonstrated excellent reproducibility, selectivity, and a low detection limit. These findings position bitter gourd-shaped Cu-doped ZnO nanostructures as promising candidates for NO 2 sensing applications across diverse environments. [ABSTRACT FROM AUTHOR]

In the current research, new metal complexes have been synthesized by using the greener synthetic approach in which 3‐Nitroaniline reacts with the elements of group‐IIB and group‐IVB. According to this method, ligand and metals were dissolved in 1,4‐dioxane and stirred at room temperature for a specific time period. The method for the preparation of metal‐base complexes is quite simple and cost‐effective. To identify the synthesized compounds various physio‐chemical analytical techniques were used such as Melting point, FT‐Raman Spectroscopy, FT‐IR Spectroscopy, Thermogravimetric analysis, and Scanning electron microscope (SEM) that provide significant data about the general structural characteristics of synthesized compounds. The percentage degradation efficiency of synthetic dyes was obtained as 57 %, 66 %, and 97 % using the synthesized compounds as photocatalysts. A statistical tool, RSM was used for the optimization of parameters (Concentration of Dye, Dose of Catalyst, and contact time). [ABSTRACT FROM AUTHOR]

This study investigates the correlation between coercivity (Hc), grain size (d), and dislocation density in the Permimphy alloy (Fe–80%Ni–6%Mo). The samples used in this study were subjected to varying levels of applied strain through processing by high-pressure torsion. The microstructure and the magnetic coercivity were analyzed using a scanning electron microscope, electron backscatter diffraction and vibrating sample magnetometry. The grain size of the samples varied from 30 to 190 nm. This study demonstrated a strong correlation between Hc and microhardness when d > 3 µm. The results show that the coercivity of the Permimphy alloy follows an inverse V-shape with respect to grain size. The coercivity of the samples decreased despite increasing the dislocation density and the hardness when d < 3 µm. This phenomenon is attributed to the ferromagnetic exchange interaction across multiple grains and leads to the alignment of magnetic moments. [ABSTRACT FROM AUTHOR]

A molten salt-assisted method for the synthesis of Eu 3 + -doped bismuth molybdate (BMO: Eu 3 + ) phosphor was proposed. (BMO: Eu 3 + ) phosphors with different phase structures were obtained by changing the calcination temperature. The applications in LED devices and latent fingerprint recognition of the obtained product were explored. The results of structural characterizations and scanning electron microscope (SEM) photographs analysis prove that the products exhibit different crystal structures and morphologies with the change of calcination temperature. Based on the above findings, the as-prepared products have potential applications in the field of WLED and potential fingerprint recognition. [ABSTRACT FROM AUTHOR]

Background: A major worldwide health issue is the rising frequency of resistance of bacteria.Drug combinations are a winning strategy in fighting resistant bacteria and might help in protecting the existing drugs.Monolaurin is natural compound extracted from coconut oil and has a promising antimicrobial activity against Staphylococcus.aureus. This study aims to examine the efficacy of monolaurin both individually and in combination with β-lactam antibiotics against Staphylococcus aureus isolates. Methods: Agar dilution method was used for determination of minimum inhibitory concentration (MIC) of monolaurin against S.aureus isolates. Scanning electron microscope (SEM) was used to detect morphological changes in S.aureus after treatment with monolaurin. Conventional and Real-time Polymerase chain reaction (RT-PCR) were performed to detect of beta-lactamase (blaZ) gene and its expressional levels after monolaurin treatment. Combination therapy of monolaurin and antibiotics was assessed through fractional inhibitory concentration and time-kill method. Results: The antibacterial activity of monolaurin was assessed on 115 S.aureus isolates, the MIC of monolaurin were 250 to 2000 µg/ml. SEM showed cell elongation and swelling in the outer membrane of S.aureus in the prescence of 1xMIC of monolaurin. blaZ gene was found in 73.9% of S.aureus isolates. RT-PCR shows a significant decrease in of blaZ gene expression at 250 and 500 µg/ml of monolaurin. Synergistic effects were detected through FIC method and time killing curve. Combination therapy established a significant reduction on the MIC value. The collective findings from the antibiotic combinations with monolaurin indicated synergism rates ranging from 83.3% to 100%.In time-kill studies, combination of monolaurin and β-lactam antibiotics produced a synergistic effect. Conclusion: This study showed that monolaurin may be a natural antibacterial agent against S. aureus, and may be an outstanding modulator of β-lactam drugs. The concurrent application of monolaurin and β-lactam antibiotics, exhibiting synergistic effects against S. aureus in vitro, holds promise as potential candidates for the development of combination therapies that target particularly, patients with bacterial infections that are nearly incurable. [ABSTRACT FROM AUTHOR]

Population ageing has increased the incidence of osteoporosis, which is mainly treated by using artificial bone. To practically utilise an artificial bone, it is necessary to synthesise bioceramics and evaluate their physical and biological properties, which requires animal experiments. To refine these properties, bioceramics must be evaluated repeatedly, which requires more time, money, and animal sacrifice. In a previous study, a machine learning model was used to predict the bone formation rate as a function of synthesis conditions, physical properties, and implant conditions before performing any animal experiments. However, the model did not consider bioceramic structure, which may be an important predictor of bone formation rate. In this study, we used scanning electron microscope (SEM) images of artificial bones to analyse their structural properties and extract important features for predicting bone formation rate, including grain size and contour, and latent variables were transformed using an autoencoder constructed with SEM images. The features and latent variables were used as inputs for a machine learning model predicting bone formation rate. The coefficient of determination of the proposed model was higher than that of the conventional model, thus confirming that a highly accurate model to predict bone formation rate can be constructed using important features in SEM images. [ABSTRACT FROM AUTHOR]

Objectives: The present study focused on the formulation of mucoadhesive bilayer composite films for the treatment of periodontitis and evaluation of their physicochemical properties. Materials and Methods: The solvent casting technique was used to prepare films. The primary layer (D) was prepared with flaxseed and hydroxypropyl methylcellulose composite to sustain the release of doxycycline hyclate. The second layer (S) comprised sodium alginate and polyvinyl alcohol composite for faster release of clove oil. Both layers were combined to generate the bilayer film (B). All formulations were characterized further to obtain an optimized formulation. Results: Attenuated total reflection-Fourier transform infrared radiation results showed intactness of drug and clove oil in the presence of excipients. The pH of the films was compatible with the periodontal cavity and the thickness was suitable for inserting into the cavity. The immediate release layer showed faster disintegration and swelling. The content of clove oil was above 80%. The rate of swelling of the primary layer was slow and drug content complied with the United States Pharmacopoeia. Scanning electron microscope analysis revealed intact, non-porous and smooth films. Films exhibited better mechanical strength and bioadhesiveness. Clove oil was released from the immediate release layer within 10 min, and doxycycline hyclate release was retarded to a minimum of up to 8 h in the primary layer as well as the bilayer. Formulation also had a significant effect on both Escherichia coli and Staphylococcus aureus. Conclusion: In the current study, bilayers were successfully prepared and characterized. The optimized formulation can be effectively used for the treatment of periodontitis. [ABSTRACT FROM AUTHOR]

In this work, the gas sensing properties of ZnS/Porous silicon heterostructures have been investigated. . Zinc sulfide(ZnS) with high gas sensing performance is successfully synthesized over the Porous silicon substrate by the spray pyrolysis method. The properties of the as-prepared samples were characterized X-ray diffraction (XRD), scanning electron microscope (SEM), Fourier transform spectrum (FTIR) and optical properties. The results reveal that the properties of the ZnS/Porous silicon heterostructures enhanced when the when the ZnS concentration is increased. The performance ZnS/Porous silicon as a gas-sensing show that the maximum sensitivity is found to be 5.11 at ZnS concentration of 0.5 M and etching time of 15 min compared to the other sensitivities. The ZnS-PSi heterojunction based gas sensor may be used for UV-light photo-detectors due to a valuable properties such as high sensitivity and fast response. [ABSTRACT FROM AUTHOR]

Introduction: Polynucleotides (PN) are becoming more prominent in aesthetic medicine. However, the structural characteristics of PN have not been published and PN from different companies may have different structural characteristics. This study aimed to elucidate the structural attributes of DOT™ PN and distinguish differences with polydeoxyribonucleotides (PDRN) using high‐resolution scanning electron microscopy (SEM) imaging. Materials and methods: DOT™ PN was examined using a Quanta 3‐D field emission gun (FEG) Scanning Electron Microscope (SEM). Sample preparation involved cryogenic cooling, cleavage, etching, and metal coating to facilitate high‐resolution imaging. Cryo‐FIB/SEM techniques were employed for in‐depth structural analysis. Results: PDRN exhibited an amorphous structure without distinct features. In contrast, DOT™ PN displayed well‐defined polyhedral shapes with smooth, uniformly thick walls. These cells were empty, with diameters ranging from 3 to 8 micrometers, forming a seamless tessellation pattern. Discussion: DOT™ PN's distinct geometric tessellation design conforms to the principles of biotensegrity, providing both structural reinforcement and integrity. The presence of delicate partitions and vacant compartments hints at possible uses in the field of pharmaceutical delivery systems. Within the realms of beauty enhancement and regenerative medicine, DOT™ PN's capacity to bolster cell growth and tissue mending could potentially transform approaches to rejuvenation treatments. Its adaptability becomes apparent when considering its contributions to drug administration and surgical procedures. Conclusion: This study unveils the intricate structural scaffold features of DOT™ PN for the first time, setting it apart from PDRN and inspiring innovation in biomedicine and materials science. DOT™ PN's unique attributes open doors to potential applications across healthcare and beyond. [ABSTRACT FROM AUTHOR]

Mesenchymal stem cells are adult stem cells that can differentiate into osteogenic, chondrogenic, adipogenic and myogenic lineages. In orthopedics and traumatology, mesenchymal stem cells, combined with biomaterials, are used mainly for treating bone fractures and diseases in humans and animals. This study aims to promote the growth, proliferation, and osteogenic differentiation of mesenchymal stem cells isolated from the adipose tissue of canines on B-TCP (Beta-tricalcium phosphate) and B-TCP/Collagen biomaterials. MTT analysis was performed to test the cell adhesion and proliferation on B-TCP and B-TCP/Collagen biomaterials used to mimic the extracellular matrix of three-dimensional bone tissue. Scanning electron microscope analysis was performed to show general surface characters of BTCP and B-TCP/Collagen biomaterials. The osteoinductive capacities of the BTCP and B-TCP/Collagen biomaterials were determined by alkaline phosphatase and Von Kossa stainings, and RT-PCR analysis. The ALP activity of the B-TCP/Col containing material was significantly higher than the B-TCP in the early days. In terms of gene expression, there were no significant differences except 14thday SPARC gene expression. The results of Von Kossa staining indicated that BTCP/ Col has above the desired level degradation capacity. As a result of this research, although it is advantageous in terms of alkaline phosphatase activity and osteogenic gene expression compared to B-TCP material, it is thought that B-TCP/Collagen biomaterial should be developed for use in bone tissue engineering due to its high degradation property. [ABSTRACT FROM AUTHOR]

Fiber-metal laminates (FMLs) are rapidly advancing materials that combine the characteristics of resin-based composites and metals. These properties can be further enhanced by incorporating nanoscale particles, resulting in a variant known as FMLs-Nano. This study explores the mechanical properties of FMLs with the incorporation of Graphene Oxide (GO) and investigates for the first time the influence of GO on bonding strength, aiming to improve the laminate's performance during the forming operation by eliminating delamination defects. The goal is to expand the potential applications of FMLs-Nano and enable the production of intricate components. To evaluate the influence of GO, we conducted tests on several mechanical aspects, including tensile strength, flexural performance, and lap shear strength. These tests involved using different GO fractions in the laminate. Microscopy was employed to examine damage patterns and understand failure behavior. Additionally, deep drawing experiments were performed and compared with conventional FMLs to evaluate the GO influence on delamination failure. The results indicate that FML-GO exhibits superior tensile performance compared to conventional FMLs, with FML-GO tensile strength and Young's modulus improved by 11.7% and 13.5%, respectively. Moreover, flexural and interface shear strength showed remarkable improvements, with an increase of 134% and 150% compared to conventional FMLs. These improvements were verified through mechanical testing and further confirmed by scanning electron microscope observations. Additionally, deep drawing experiments demonstrated significant improvement as delamination of the FML layers was successfully eliminated during the forming process. [ABSTRACT FROM AUTHOR]

Ferrisilicate was considered a crystalline zeolite containing iron (III) and silicon in the zeolite lattice positions. The aim of this work is to study the influence of Fe2O3/SiO2 molar ratios contained in the Fe-silica on the properties of geopolymer materials derived from waste fired clay brick and metakaolin. Fe-silica with various Fe2O3/SiO2 molar ratios of 0.2, 0.4, 0.6, 0.8 and 1.0 were synthesised using rice husk ash and hematite. 0 and 10 wt. % of each type of aluminosilicate is added to each type of Fe-silica. A commercial sodium silicate solution with a SiO2/Na2O molar ratio of 1.6 is used as a hardener. X-ray diffractometry and Fourier Transform Infrared spectroscopy are used for the characterisation of the Fe-silica and the geopolymers. In addition to these analyses, the compressive strengths of the geopolymer materials have been measured and the fragments obtained have been examined using a scanning electron microscope. The results show that the compressive strengths of metakaolin-based geopolymers increase from 53.34 to 69.08 MPa when the Fe2O3/SiO2 molar ratios contained in the Fe-silica are incremented from 0 to 0.8. When the Fe2O3/SiO2 molar ratio is increased from 0.8 to 1.0, they are reduced from 69.08 to 63.22 MPa. In contrast, those of geopolymer materials derived from waste fired clay brick decrease from 45.42 to 21.15 MPa when their Fe2O3/SiO2 molar ratios rise from 0 to 0.6 increases from 21.15 to 24.11 MPa beyond 0.6. The micrograph of the geopolymer material from the mixture of metakaolin and Fe-silica with a molar ratio of Fe2O3/SiO2 equal to 0.8 is more compact, homogeneous and partially smooth compared to other geopolymers. The presence of hematite and cristobalite, which act as fillers, is evident from the X-ray patterns of geopolymer materials after the addition of Fe-silica. This work shows that the addition of metakaolin to multi-molar of Fe-silica significantly improves the compressive strength of geopolymer materials. On the other hand, this addition leads to a reduction in the compressive strength when waste fired clay brick is used. [ABSTRACT FROM AUTHOR]

Recently, thermoelectric (TE) materials have seized great attention for their role in clean energy conversion applications. Cu2S are p-type super-ionic conductors featuring a narrow band gap of 1.7 eV while exhibiting outstanding thermoelectric characteristics. The Cu2S matrix and the CuO nanoinclusions were successfully synthesized via solvothermal and hydrothermal routes, respectively. The morphological observations made through scanning and transmission electron microscope ensured the homogeneous distribution of CuO nanoinclusions in the Cu2S matrix, hence, the formation of standard Cu2S/CuO composites. In this work, we have introduced a "combined strategy" to boost the figure of merit (zT). The Seebeck coefficient reached the maximum of 271.86 μVK−1 at 573 K for the 20 wt% CuO sample (a 71.45% gain when compared to the pure Cu2S) owing to the filtration of low-energy carriers at the CuO potential barriers (2.5 eV). The Cu2S/20 wt% CuO sample achieved the minimum thermal conductivity values. At 573 K, We recorded a vast power factor value of 952.66 μWm−1 K−2 (32.23% gain) for the Cu2S/15 wt% CuO sample. These values are vastly higher than previously reported for the copper sulfides-based TE materials. Consequently, an optimised zT value of 0.44 (214.29% gain) was accomplished for the Cu2S/15 wt% CuO sample at 573 K. The strategy presented in our study can also be extended to other TE materials, especially for the promising copper chalcogenides to improve their zT values. [ABSTRACT FROM AUTHOR]

The process of superhard particle breakage in the grinding zone of the fluidized bed opposed jet mill is investigated using the CFD-DEM (computational fluid dynamics-discrete element method) coupling method with the Tavares UFRJ Breakage Model in the present study. The effects of structural and operational parameters, such as target plate structure, nozzle position, air inlet velocity, and feed rate, on the equipment stress distribution, airflow velocity, pressure field, particle velocity, and cumulative particle size distribution are thoroughly studied to determine the optimal structural and operational parameters. Experimental validation is conducted, including scanning electron microscope (SEM) observation of particle morphology and analysis of particle size distribution of ground product particles. The simulation results indicate that the wear rate of the structure without a target plate is lower than that of the structure with a target plate in the grinding central zone. Therefore, the structure without a target plate is chosen for further investigation. The cumulative particle size distribution after grinding is influenced by nozzle position, air inlet velocity, and feed rate. The particle D50 is positively correlated with nozzle spacing and feed rate, while it is negatively correlated with air inlet velocity. The optimal grinding effect is achieved when the distance between the nozzle and the center of the grinding zone ranges from 52.5 mm to 72.55 mm, the air inlet velocity is 950 m/s, and the feed rate is 10.5 g/s. Through experimental investigation, it has been observed that when the feed rate is 10 g/s, the particle size distribution becomes more uniform. Furthermore, consistent trends in the cumulative particle size distribution in the experiment and simulation results can be found, which validates the present numerical model. It was observed that particles at low feed rates retain certain angular edges, while particle roundness increases at high feed rates. [ABSTRACT FROM AUTHOR]

Nephrite is a very precious gemstone material. As a non-renewable resource, the discovery of new nephrite deposits and the study of the genesis of nephrite have aroused great interest. A new occurrence of nephrite known as Xinyu nephrite was discovered in Xinyu Country, Jiangxi province, China. Field investigations reveal that nephrite appears in a contact zone between the Mengshan composite granitic pluton and Permian carbonate rock. The carbonate rock is calcic marble that underwent diopsidization and tremolitization. Nephrites have a light yellow-green color, weak greasy luster, are slightly-translucent to translucent, and are fine-grained. Their refractive index (RI) ranges from 1.60 to 1.61, and their specific gravity (SG) value ranges from 2.90 to 2.91, falling within the range of nephrites from Xinjiang, China. Their Mohs hardness (Hm) ranges from 5.78 to 5.83. Petrographic observations and electron probe micro analyzer (EPMA) data indicated that analyzed nephrites mainly comprise tremolite, with minor diopside, calcite, quartz, and apatite. Tremolite has a ratio of Mg/(Mg + Fe2+) greater than 0.99. The tremolite grains show microscopic fibrous-felted and columnar textures. Scanning electron microscope (SEM) images show some tremolite fibers interwoven in different crystallographic orientations, and some arranged in parallel. Fourier transform infrared and Raman spectroscopy features reveal the bands of minerals typical for nephrite composition. The petrographic characteristics and geological background of the Mengshan area indicate that nephrite formed through a replacement of calcic marble, which differs from the two known types (D-type: dolomite-related; S-type: serpentinite-related). Mineral replacements were common in nephrite, including diopside by tremolite, calcite by tremolite, and recrystallization of coarse by fine tremolite grains. The discovery of Xinyu nephrite occurrence complements the resource and provides an updated case for the in-depth study of the diversity of nephrite deposits. [ABSTRACT FROM AUTHOR]

The diagenetic evolution of sandstone is very complicated under the conditions of high temperatures and pressures in deep-water, deep-buried regimes, which have great influence on reservoir quality. This study investigates the typical reservoir target of Neogene deep-water, submarine-fan sandstones under high-temperature, high-pressure regimes in the Qiongdongnan Basin, South China Sea. Utilizing a thin section, scanning electron microscope (SEM), mineral geochemistry combined with burial history evolution, complex diagenetic events, and main controlling factors of the sandstone in the Neogene Meishan Formation were determined. The results show that the evolution of sandstone reservoirs is initially controlled by depositional framework compositions and subsequently modified by eogenetic and mesogenetic alterations during progressive burial. Eogenetic alterations mainly include the following: (1) mechanical compaction; (2) dissolution of feldspar; (3) low-Fe calcite cementation. Mesogenetic events were identified as the following: (1) dissolution of feldspar; (2) ferroan calcite and ankerite formation; (3) precipitation of quartz and clay mineral. Mechanical compaction is greatly influenced by the original depositional framework composition, and sandstone samples enriched in high contents of detrital clay matrix always experienced extensive mechanical compaction. Different phases of carbonate cement during different diagenetic regimes lead to continuous destruction on reservoir porosity. The dissolution of unstable feldspar minerals during eogenetic and mesogenetic environments leads to the development of secondary porosities and would enhance the quality of the reservoir. Overpressure formation is pervasively developed owing to early disequilibrium compaction and subsequent natural gas charging. Only well-sorted sandstones with low contents of detrital clay matrix could resist early mechanical compaction, lead to ample residual original porosities, and then undergo extensive mineral dissolution to generate sufficient secondary porosities. Subsequently, these porosities would be effectively protected by overpressure formation. Poor-sorted sandstones with high contents of detrital clay matrix would experience strong mechanical compaction and extensive destruction of original porosities. Thus, these sandstones are difficult to have significant dissolution and are unable to be effectively protected by overpressure formation. Therefore, the interplay between the original framework composition and the corresponding diagenetic pathways coupled with overpressure formation would result in strong reservoir heterogeneity for the deep-buried sandstones during progressive burial. [ABSTRACT FROM AUTHOR]

The synergistic effects of eugenol and cinnamaldehyde (MEC) were firstly used for quinoa fresh noodles (QFN) preservation. The amount of eugenol and cinnamaldehyde in combination was reduced 75% MIC value and 50% MBC value compared to the single application of eugenol and cinnamaldehyde respectively. The shelf life of QFN was prolonged 2.5 times by MEC at 25°C. Besides, MEC can significantly maintain the texture and color of QFN with less odor impact. Further mechanisms of MEC in anti-Bacillus velezensis were suggested to affect the lag phase during growth, and disrupt the cell integrity with adenosine triphosphate and protein leakage. In addition, the observing winkle and break of cell membrane was also obtained by scanning electron microscope. Besides, a lower concentration of MEC inhibited the growth of biofilm. MEC did present a synergistic and strengthening antibacterial capacity in the inhibition of B. velezensis, and can be suggested as an antimicrobial agent in food preservations. [ABSTRACT FROM AUTHOR]

In this paper, a safe, non-toxic, and low-cost method was adopted to modify ultra-high molecular weight polyethylene (UHMWPE) fibers. gallic acid (GA) and polyethyleneimine (PEI) were co-deposited on the surface of UHMWPE fibers by Michael addition and Schiff base reaction in an alkaline solution with pH 8.5. The structure and properties were analyzed and characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS), Thermogravimetric Analyzer (TG), etc. The morphology of the UHMWPE fibers and the degree of firmness of the surface coatings were observed by Scanning Electron Microscope (SEM), and the effects of different mass ratios of GA-PEI on the UHMWPE fibers were investigated. The results showed that the surface active functional groups of the modified UHMWPE fibers increased, and the bending properties and interfacial shear strength of the composites with epoxy resin were significantly improved, with the bending strength and interfacial shear strength increased by 33.1% and 45.9%, respectively. [ABSTRACT FROM AUTHOR]

This work aims to study the cutting behavior of biocomposites under different controlled hygrothermal conditions. This investigation choice is motivated by the fact that natural plant fibers such as flax are characterized by their hydrophilicity which makes them able to absorb water from a humid environment. This absorption ability is intensified by increasing the conditioning temperature. The moisture diffusion process affects considerably the mechanical properties of the resulting composite, which causes many issues during the machining operations. In this paper, moisture diffusion, chip form, cutting and thrust forces, and scanning electron microscope (SEM) observations are considered to explore the cutting behavior of flax fiber-reinforced polylactic acid (PLA) depending on the hygrothermal conditioning time. Results reveal that moisture content in the biocomposite is significantly influenced by the conditioning temperature and the fiber orientation. Moisture content and fiber orientation affect both the curling behavior of the removed chip as well as the tool/chip interaction in terms of friction. The machinability of flax fiber-reinforced PLA biocomposites depending on hygrothermal conditioning time is then investigated using SEM analysis in addition to analytical modeling. An analysis of variance is used finally to quantify the observed results. [ABSTRACT FROM AUTHOR]

Using macroporous cation exchange resin as the donor of exchangeable ions and carrier of products, ZnO@IER (namely, zinc oxide [ZnO]-loaded ion exchange resin) composites were successfully synthesized through the constant temperature oscillation and hydrothermal method. Scanning electron microscope results show that the gullies on the surface of D113 resin were inlaid with granular ZnO product and the size was <200 nm; D072 resin had a smooth surface structure, and when the hydrothermal time was 2 or 3 h, a perfect ZnO product with hexagonal structure could be obtained with side length of about 2–2.5 μm and thickness of hundreds of nanometers. Energy dispersive spectroscopy and X-ray diffraction characterization fully confirmed the existence of ZnO in the composite. In addition, ZnO@D072IER-2h had a significant degradation effect on methylene blue solution, and the photocatalytic degradation rate reached 92.5% within 200 min. The photocatalytic degradation of ZnO@IER composites for the methylene blue solution was due to superposition of photocatalytic effects of ion exchange resin and ZnO. [ABSTRACT FROM AUTHOR]

Weight reduction is one of the prime goals for auto industries to achieve fuel economy, and magnesium matrix composite offers the opportunity to assist with fulfilling those needs. The present work focuses on developing the magnesium alloy (AZ91D), AZ91D/SiCnp nanocomposite, and AZ91D/SiCnp/CNT hybrid nanocomposite via the semisolid stir casting technique incorporating the ultrasonic vibration process. The produced cast samples are subjected to physical, microstructural, and mechanical characteristics study. The evaluated results are compared and it was found that AZ91D/6wt% SiCnpnanocomposite offers high hardness (78.45 ± 0.1 Hv), yield (150 ± 1.8 MPa), and ultimate tensile strength (241 ± 1.75 MPa) as compared to the cast AZ91D alloy samples. The scanning electron microscope reveals the homogeneous particle distribution structure with reduced porosity. The density of the developed composite obeys the rule of the mixture, and the porosity is limited to less than 1%. The presence of 6 wt% carbon nanotube in AZ91D/6wt% SiCnp alloy nanocomposite facilitates superior hardness, yield, and tensile strength of 84.35 ± 0.1 Hv, 174 ± 1.5 MPa, and 271 ± 1.6 MPa. The impact strength of the composite increased, while the content of SiCnp was improved. [ABSTRACT FROM AUTHOR]

Recently, significant progress has been made in the preparation and properties of fiber-reinforced shells for investment casting; however, the research on the enhancement mechanism of fiber is inadequate. Herein, the composite shell is prepared using the airflow placement fiber process, and the conventional method, preimmersion silica sol and preimmersion slurry methods are adopted to obtain different interfaces between the matrix and fibers. Combined with the directional tensile test and fracture morphology of the shell observed via scanning electron microscope and stereomicroscope, the fiber-reinforced mechanism of the shell is analyzed in detail. It is found that the shell with polypropylene fibers is strengthened by the fiber pull-out, debonding, debonding-deformation and bridging-deformation, even with the different interface bonding between the matrix and fibers. However, the main failure modes of fibers are different under different interface conditions. The fibers in the preimmersion slurry shell mainly fail in the form of debonding-deformation and bridging-deformation, which makes the green strength of composite shells increase significantly. [ABSTRACT FROM AUTHOR]

This paper originally investigates the sulfide inclusion-induced micro-scaled pitting corrosion in indoor atmospheric environment on automotive crankshafts manufactured by classical non-quenched and tempered steel using scanning electron microscope using energy-dispersive spectrometer. The crankshafts, which were disassembled from gasoline engines with low mileage after specific tests, were stored in an indoor atmospheric environment with an ambient humidity of approximately 75% for 2 weeks. The experimental results show that the anodic reaction initially took place at the sulfide inclusion/steel matrix interface, which was induced by the sulfide inclusion wherever very small amount of residual neutral chloride medium on the crankshaft surface was activated by moisture in the air. In addition, the reaction products could accelerate the rate of pitting corrosion toward the steel matrix in nearby micro-zones, and tiny rust that could be hardly observed by visual inspection, as a result, appeared in micro-scale on the experimental crankshaft surface even in indoor atmospheric environment. It is concluded that even when the crankshaft is stored indoors, special attention should be pertinently paid to corrosion prevention, for example, to remove all corrosive media on surface carefully by fine cleaning, to implement rust prevention measures, and to control humidity of atmospheric environment at a proper level. [ABSTRACT FROM AUTHOR]

Sulfuric acid corrosion is a non-negligible problem affecting the durability of concrete materials. To explore the mechanism of sulfuric acid corrosion on the fracture performance and microstructure of concrete, three-point bending test was utilized to analyze the evolutionary characteristics of the crack mouth opening displacement and the fracture toughness of concrete corroded by sulfuric acid. Scanning electron microscope and energy-dispersive spectrometer were utilized to analyze the characteristics of microscopic morphology and corrosion products of concrete corroded by sulfuric acid. The result shows that the fracture evolution of concrete can be divided into four stages: nonlinear development stage, linear development stage, deceleration expansion stage, and accelerated expansion stage. In purified water environment, the peak fracture load and fracture toughness of concrete is positively related to corrosion time. In sulfuric acid corrosion environment, the peak fracture load and fracture toughness of concrete are negatively related to corrosion time and concentrations of sulfuric acid solution. Microscopic experiments show that the interior of concrete is less affected by sulfuric acid corrosion, and the structure is relatively dense compared with the surface. The expansion crystal ettringite formed at the fracture surface of the concrete specimen during sulfuric acid corrosion was the main reason for the durability reduction of concrete. [ABSTRACT FROM AUTHOR]

Wound dressings developed by combining plant extracts with polymers have made a great progress in wound care treatment. One plant with remarkable healing properties is Phyllanthus emblica Linn (P. emblica), which is described as having potent antioxidant, antimicrobial and anti‐inflammatory properties. The aim of this study is to evaluate the biocompatibility of P. emblica‐loaded polyvinyl alcohol/gelatin‐based cryogels (PVA/Gel/P.emblica) through cytotoxicity and proliferation tests in HaCaT cells and examine their potential in wound dressing applications. Accordingly, PVA/Gel/P.emblica cryogels are successfully synthesized and characterization studies and in vitro cell culture studies are performed. The swelling tests and Brunauer–Emmett–Teller analysis results show that swelling and surface area properties of cryogels increase with increasing P. emblica amounts. Morphological results display that the cryogels have a dense, interconnected pore morphology and a macroporous structure. 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide, trypan blue exclusion, and live–dead assay results reveal that P. emblica enhances cell proliferation, increases cell number, and improves cell viability. Based on the scanning electron microscope, immunofluorescence, and Giemsa staining images, it is observed that P. emblica promotes cell attachment, proliferation, and penetration. These findings confirm that PVA/Gel/P.emblica cryogels are suitable for use as wound dressing materials and can be developed with further studies. [ABSTRACT FROM AUTHOR]

The rotor or impeller is a rotational and key part of a pump and compressor. This article presents the detailed development process of a rotor of small size constructed from an EN8 steel cylindrical blank using a novel technique based on a computer numerical control engraving milling machine (CNC-EMM) equipped with a 4 mm tungsten carbide end mill cutter. We fabricated a total of twenty-eight stepped rotors following the Box–Behnken Design (BBD) DoE technique at fourteen distinct combinations of CNC-EMM variable parameters, namely rotational speed, feed, and plunge feed. Average roughness 'Ra', an important surface quality indicator, has been considered and presented in this article, as a quality measure for the fabricated rotors. Feed and plunge feed have been identified as the most influencing variable parameters as per an analysis of variance (ANOVA) test. The lowest average roughness value obtained by this process for the rotor blade was 0.11 µm. A micrograph obtained from a field-emission scanning electron microscope (FE-SEM) showed a uniform and accurate tooth profile along with burr formation at corner edges. This study claims to establish engraving milling as a viable alternative to other manufacturing processes used for rotor blades. The findings of this study are useful to scholars, engineers, and researchers who are exploring new ways to fabricate mechanical parts and components. [ABSTRACT FROM AUTHOR]

To promote the resource utilization of steel slag and improve the production process of steel slag in steelmaking plants, this research studied the characteristics of three different processed steel slags from four steelmaking plants. The physical and mechanical characteristics and volume stability of steel slags were analyzed through density, water absorption, and expansion tests. The main mineral phases, morphological characteristics, and thermal stability of the original steel slag and the steel slag after the expansion test are analyzed with X-ray diffractometer (XRD), scanning electron microscope (SEM), and thermogravimetric analysis (TG) tests. The results show that the composition of steel slag produced by different processes is similar. The main active substances of other processed steel slags are dicalcium silicate (C2S), tricalcium silicate (C3S), CaO, and MgO. After the expansion test, the main chemical products of steel slag are CaCO3, MgCO3, and calcium silicate hydrate (C-S-H). Noticeable mineral crystals appeared on the surface of the steel slag after the expansion test, presenting tetrahedral or cigar-like protrusions. The drum slag had the highest density and water stability. The drum slag had the lowest porosity and the densest microstructure surface, compared with steel slags that other methods produce. The thermal stability of steel slag treated by the hot splashing method was relatively higher than that of steel slag treated by the other two methods. [ABSTRACT FROM AUTHOR]

The harsh service environment of aeroengine hot-end components requires superalloys possessing excellent antioxidant properties. This study investigated the effect of pre-strain on the oxidation behavior of polycrystalline Ni3Al-based superalloys. The growth behaviors of oxidation products were analyzed by scanning electron microscope, transmission electron microscope, X-ray Photoelectron Spectroscopy and Raman spectroscopy. The results indicated that the 5% pre-strained alloys exhibited lower mass gain, shallower oxidation depth and more compact oxide film structures compared to the original alloy. This is mainly attributed to the formation of rapid diffusion paths for Al atoms diffusing to the surface under 5% pre-strain, which promotes the faster formation of protective Al2O3 film while continuing to increase the pre-strain to 25% results in less protective transient oxidation behavior being aggravated due to the increase in dislocation density within the alloy, which prevents the timely formation of the protective Al2O3 film, resulting in uneven oxidation behavior on the alloy. [ABSTRACT FROM AUTHOR]

It has been recently demonstrated that laser micromachining of magnetoactive elastomers is a very convenient method for fabricating dynamic surface microstructures with magnetically tunable properties, such as wettability and surface reflectivity. In this study, we investigate the impact of the micromachining process on the fabricated material's structural properties and its chemical composition. By employing scanning electron microscopy, we investigate changes in size distribution and spatial arrangement of carbonyl iron microparticles dispersed in the polydimethylsiloxane (PDMS) matrix as a function of laser irradiation. Based on the images obtained by a low vacuum secondary electron detector, we analyze modifications of the surface topography. The results show that most profound modifications occur during the low-exposure (8 J/cm2) treatment of the surface with the laser beam. Our findings provide important insights for developing theoretical models of functional properties of laser-sculptured microstructures from magnetoactive elastomers. [ABSTRACT FROM AUTHOR]