Search

Mining is always associated with deforestation and destruction of forest and agricultural land. Though it offers employment and governments' income, it still causes detrimental effects to the environment. The re-opening of open-pit mining corporation in 2011, in the small village of Bato-Bato, Narra, Palawan Philippines aggravated deforestation, floods, and decreased in rice yield of rice farmers. This study determined the Cobalt content in topsoil in mine-tailing sites within the rice farms. Field data collection and laboratory analysis methods were used in this study. This study utilized three sampling sites and three replications per site and 2 kg of topsoil from each replication per sampling site were collected following the quadrant method. The soil samples were sent to the laboratory for analysis. Cobalt content in topsoil was analyzed using Xray Flourescence (XRF) method. Normality of data was determined by Pearson Coefficient of Skewness (PCS) Test. Significant difference on the Cobalt content in topsoil was analyzed using F- Test and appropriate post hoc test. The Cobalt content in topsoil in three sampling sites is high (from 146.7 mg/kg to 306.7 mg/kg) in comparison with the average Cobalt content a topsoil should contain (41 mg/kg). High Cobalt content affects rice productivity. Mining operator should prioritize projects that prevent leaching of mining sediments during flood. [ABSTRACT FROM AUTHOR]

Heavy metal (e.g. cobalt) pollution causes a serious of environmental and agricultural problems. On the other hand, plant growth-promoting microorganisms enhance plant growth and mitigate heavy metal stress. Herein, we isolated and identified the unclassified species strain NARS9, belong to Haloferax ,. Cobalt (Co, 200 mg/kg soil) stress mitigating impact of the identified on wheat grains yield, primary and secondary metabolism and grain quality was investigated. Co alone significantly induced Co accumulation in wheat grain (260%), and consequently reduced wheat yield (130%) and quality. Haloferax NARS9 alone significantly enhanced grain chemicals composition (i.e., total sugars (89%) and organic acids (e.g., oxalic and isobutyric acids), essential amino acids (e.g., threonine, lysine, and histidine) and unsaturated fatty acids (e.g. eicosenoic, erucic and tetracosenoic acids). Interestingly, Co stress induced wheat grain yield, reduction were significantly mitigated by Haloferax NARS9 treatment by 26% compared to Co stress alone. Under Co stress, Haloferax NARS9 significantly increased sugar metabolism including sucrose and starch levels and their metabolic enzymes (i.e. invertases, sucrose synthase, starch synthase). This in turn increased organic acid (e.g. oxalic (70%) and malic acids (60%)) and amino acids. levels and biosynthetic enzymes, e.g. glutamine synthetase and threonine synthase. Increased sugars levels by Haloferax NARS9 under Co treatment also provided a route for the biosynthesis of saturated fatty acids, particularly palmitic and stearic acids. Furthermore , Haloferax NARS9 treatment supported the wheat nutritive value through increasing minerals (Ca, Fe, Mn, Zn) and antioxidants i.e., polyphenol, flavonoids, ASC and GSH and total polyamines by 50%, 110%, 400%, 30%, and 90% respectively). These in parallel with the increase in the activity of (phenylalanine ammonia-lyase (110%) in phenolic metabolism). Overall, this study demonstrates the potentiality of Haloferax NARS9 in harnessing carbon and nitrogen metabolism differentially in wheat plants to cope with Co toxicity. Our results also suggested that the use of Haloferax NARS9 in agricultural fields can improve growth and nutritional value of wheat grains. [ABSTRACT FROM AUTHOR]

Metals are used in orthopedic implants. The wear of arthroplasty implant can lead to the release of arthroprosthetic metals, both locally and systemically, after migration into the organs. While the toxicity of metal-on-metal arthroplasty implants is well-known and monitored, the toxicity associated with metal-on-polyethylene (MoP) ones is not as comprehensively understood. This study aimed to investigate the release of metals from MoP arthroplasty implants and their impact on the tissue metal profile in autopsied individuals, comparing them to deceased controls without prostheses. High-resolution ICP-MS was employed to analyze 39 metals in the blood, urine, hair, organs, and periprosthetic tissue of 25 deceased individuals with arthroplasty implants and 20 control subjects (Prometox study, protocol ID: APHP180539, NCT03812627). Eight metals (beryllium, chromium, cobalt, lanthanum, molybdenum, nickel, tellurium, titanium) exhibited significant impacts in arthroplasty implant wearers across various organs. Increased concentrations of La and Be were observed, the origin of which could not be precisely defined within the scope of this study. Notably, the lungs emerged as the primary target organ for metallic ions contained in implants. This study suggests that MoP arthroplasty implants, even when functional and not visibly worn, release arthroprosthetic metals into the body, potentially causing disturbances. Furthermore, considering the presence of an arthroplasty implant in autopsy reports may be relevant, as the released metals could influence the tissue metal profile., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Production of metal debris from implant wear and corrosion processes is now a well understood occurrence following hip arthroplasty. Evidence has shown that metal ions can enter the bloodstream and travel to distant organs including the brain, and in extreme cases, can induce sensorial and neurological diseases. Our objective was tosimultaneously analyze brain anatomy and physiology in patients with long-term and well-functioning implants. Included were subjects who had received total hip or hip resurfacing arthroplastywith an implantation time of a minimum of 7 years (n = 28) and age- and sex-matched controls (n = 32). Blood samples were obtained to measure ion concentrations of cobalt and chromium, and the Montreal Cognitive Assessment was performed. 3T MRI brain scans were completed with an MPRAGE sequence for ROI segmentation and multiecho gradient echo sequences to generate QSM and R2* maps. Mean QSM and R2* values were recorded for five deep brain and four middle and cortical brain structures on both hemispheres: pallidum, putamen, caudate, amygdala, hippocampus, anterior cingulate, inferior temporal, and cerebellum. No differences in QSM or R2* or cognition scores were found between both groups (p > 0.6654). No correlation was found between susceptibility and blood ion levels for cobalt or chromium in any region of the brain. No correlation was found between blood ion levels and cognition scores. Clinical significance: Results suggest that metal ions released by long-term and well-functioning implants do not affect brain integrity., (© 2024 The Authors. Journal of Orthopaedic Research® published by Wiley Periodicals LLC on behalf of Orthopaedic Research Society.)

Metal pollutants are a growing concern due to increased use in mining and other industrial processes. Moreover, the use of metals in daily life is becoming increasingly prevalent. Metals such as manganese (Mn), cobalt (Co), and nickel (Ni) are toxic in high amounts whereas lead (Pb) and cadmium (Cd) are acutely toxic at low µM concentrations. These metals are associated with system dysfunction in humans including cancer, neurodegenerative diseases, Alzheimer's disease, Parkinson's disease, and other cellular process'. One known but lesser studied target of these metals are lipids that are key membrane building blocks or serve signalling functions. It was shown that Mn, Co, Ni, Pb, and Cd cause rigidification of liposomes and increase the phase transition in membranes composed of both saturated or partly unsaturated phosphatidic acid (PA) and phosphatidylserine (PS). The selected metals showed differential effects that were more pronounced on saturated lipids. In addition, more rigidity was induced in the biologically relevant liquid-crystalline phase. Moreover, metal affinity, induced rigidification and liposome size increases also varied with the headgroup architecture, whereby the carboxyl group of PS appeared to play an important role. Thus, it can be inferred that Mn, Co, Ni, Cd, and Pb may have preferred binding coordination with the lipid headgroup, degree of acyl chain unsaturation, and membrane phase., (© 2024. The Author(s), under exclusive licence to Springer Nature B.V.)

Cobalt-induced cardiomyopathy is a well-known but uncommon disease, and the physician must maintain a high index of suspicion in order to make a timely diagnosis. We report two patients with cobalt-induced cardiomyopathy. Both patients developed progressively worsening symptoms of cobalt toxicity following revision of a fractured ceramic-on-ceramic total hip replacement to a metal-on-polyethylene bearing. In both patients, echocardiography showed LV hypertrophy, biventricular systolic dysfunction, and a large amount of pericardial effusion. Due to decompensated heart failure, both patients were initially considered candidates for heart transplantation. One patient was diagnosed with cobalt-induced cardiomyopathy before transplantation. He received cobalt chelation therapy and revision surgery, which led to complete recovery of heart function. In the other patient, the diagnosis was not made until the time of heart transplantation. The gross examination of the explanted heart revealed typical features of cobalt cardiotoxicity, which was then diagnosed as cobalt-induced cardiomyopathy. These cases emphasise the importance of early diagnosis and prompt treatment of cobalt intoxication. [ABSTRACT FROM AUTHOR]

Introduction. One in eight of all total hip replacements requires revision within 10 years, 60% because of wear-related complications. The bearing surfaces may be made of cobalt/chromium, stainless steel, ceramic, or polyethylene. Friction between bearing surfaces and corrosion of non-moving parts can result in increased local and systemic metal concentrations. Objectives. To identify and systematically review published reports of systemic toxicity attributed to metal released from hip implants and to propose criteria for the assessment of these patients. Methods. Medline (from 1950) and Embase (from 1980) were searched to 28 February 2014 using the search terms (text/abstract) chrom* or cobalt* and [toxic* or intox* or poison* or adverse effect or complication] and [prosthes* or 'joint replacement' or hip or arthroplast*] and PubMed (all available years) was searched using the search term (('Chromium/adverse effects'[Mesh] OR 'Chromium/poisoning'[Mesh] OR 'Chromium/toxicity'[Mesh]) OR ('Cobalt/adverse effects'[Mesh] OR 'Cobalt/poisoning'[Mesh] OR 'Cobalt/toxicity'[Mesh])) AND ('Arthroplasty, Replacement, Hip'[Mesh] OR 'Hip Prosthesis'[Mesh]). These searches identified 281 unique references, of which 23 contained original case data. Three further reports were identified from the bibliographies of these papers. As some cases were reported repeatedly the 26 papers described only 18 individual cases. Systemic toxicity. Ten of these eighteen patients had undergone revision from a ceramic-containing bearing to one containing a metal component. The other eight had metal-on-metal prostheses. Systemic toxicity was first manifest months and often several years after placement of the metal-containing joint. The reported systemic features fell into three main categories: neuro-ocular toxicity (14 patients), cardiotoxicity (11 patients) and thyroid toxicity (9 patients). Neurotoxicity was manifest as peripheral neuropathy (8 cases), sensorineural hearing loss (7) and cognitive decline (5); ocular toxicity presented as visual impairment (6). All these neurological features, except cognitive decline, have been associated with cobalt poisoning previously. Type of prosthesis and blood metal concentrations. Where blood or serum metal concentrations were reported ( n = 17 for cobalt and n = 14 for chromium), the median cobalt concentration was 398 (range, 13.6-6521) μg/L and the median chromium concentration was 48 μg/L (in whole blood) (range, 4.1-221 μg/L including serum and blood values). Those patients reported to have systemic features who had received a metal-on-metal prosthesis ( n = 8) had a median peak blood cobalt concentration of 34.5 (range, 13.6-398.6) μg/L; those with a metal-containing revision of a failed ceramic prosthesis ( n = 10) had a median blood cobalt concentration of 506 (range, 353-6521) μg/L. Management. The most common treatment was removal of the metal-containing prosthesis, undertaken in all but 2 patients. This was usually associated with a fall in circulating cobalt concentration and improvement in some or all features. Clinical and toxicological assessment of systemic features. We propose the following criteria for assessing the likelihood that clinical features are related to cobalt toxicity: clinical effects consistent with the known neurological, cardiac, or thyroidal effects of cobalt, and for which any other explanation is less likely; increased blood cobalt concentrations (substantially higher than those in patients with well-functioning prostheses) several months after hip replacement; a fall in the blood cobalt concentration, usually accompanied by signs of improvement in features. When judged by these criteria, the systemic features in 10 of the reported cases are likely to be related to cobalt exposure from a metal-containing hip prosthesis. Conclusions. Rarely, patients exposed to high circulating concentrations of cobalt from failed hip replacements develop neurological damage, hypothyroidism and/or cardiomyopathy, which may not resolve completely even after removal of the prosthesis. The greatest risk of systemic cobalt toxicity seems to result from accelerated wear of a cobalt-containing revision of a failed ceramic prosthesis, rather than from primary failure of a metal-on-metal prosthesis. [ABSTRACT FROM AUTHOR]

Background: With the re-popularity of metal-on-metal (MoM) bearing in recent years, the cobalt toxicity has been a cause for concern in the total hip replacement surgery by both physicians and patients. Methods: MG-63 cell line was cultured in vitro and incubated with cobalt (II) chloride (CoCl2) and/or with astaxanthin (ASX) for 24 h. MTT assay was conducted to evaluate the cell viability after cobalt exposure and ASX treatment. Fluorescence-activated cell sorting (FACS) analysis was performed to examine the reactive oxygen species (ROS) level. Quantitative real-time polymerase chain reaction (PCR) was adopted to determine the mRNA levels of related targets. And western blot analysis was used to examine the protein expressions. One-way ANOVA with posttest Newman-Keuls multiple comparisons was adopted to analysis all the obtained data. Results: In the current study, ASX exhibited significant protective effect against the Co(II)-induced cytotoxicity in MG-63 cell line. We also found that ASX protected the cells against Co-induced apoptosis by regulating the expression of Bcl-2 family proteins. Besides, heme oxygenase 1 (HO-1) could be activated by Co exposure; ASX treatment significantly inhibited HO-1 activation, suppressing the oxidative stress induced by Co exposure. Moreover, c-Jun N-terminal Kinase (JNK) phosphorylation was shown to participate in the signaling pathway of the protective effect of ASX. However, knockdown of JNK expression by siRNA transfection or JNK inhibitor SP600125 treatment did not affect the protective effect of ASX against cobalt cytotoxicity in MG-63 cells. Conclusions: ASX mitigated cobalt cytotoxicity in the MG-63 cells by modulating the oxidative stress. And ASX could be a promising therapy against cobalt toxicity in the hip articulation surgery. [ABSTRACT FROM AUTHOR]

Due to tribocorrosion, metal ions are released from metallic components in hip implants and cause adverse reactions. The adverse reaction sensitivity to metal ions showed high dependency on individual patient and it has been recognized that adverse reactions even occur in patients with metal-on-polymer articulations. In this study, based on a tribocorrosion model for CoCrMo alloy, a lubricated wear accelerated corrosion model was developed for CoCrMo alloy–UHMWPE tribocorrosion contacts. The model was verified and calibrated using laboratory tribometer experimental results and was used to predict metal ion release from CoCrMo alloy heads in MoP hip joints. The results showed correspondence between model predicted wear accelerated corrosion and literature reported material loss of CoCrMo alloy heads in MoP hip joints tested using hip joint simulators. This model provides a tool to predict the level of metal ions released from MoP hip joints and has the potential to be used by medical doctors to evaluate the risk of adverse reactions for patients planned to receive a MoP hip implant. [ABSTRACT FROM AUTHOR]

Background: The global market for lithium-ion batteries (LIBs) is growing exponentially, resulting in an increase in mining activities for the metals needed for manufacturing LIBs. Cobalt, lithium, manganese, and nickel are four of the metals most used in the construction of LIBs, and each has known toxicological risks associated with exposure. Mining for these metals poses potential human health risks via occupational and environmental exposures; however, there is a paucity of data surrounding the risks of increasing mining activity. The objective of this review was to characterize these risks. Methods: We conducted a review of the literature via a systematic search of the PubMed database on the health effects of mining for cobalt, lithium, manganese, and nickel. We included articles that (1) reported original research, (2) reported outcomes directly related to human health, (3) assessed exposure to mining for cobalt, lithium, manganese, or nickel, and (4) had an available English translation. We excluded all other articles. Our search identified 183 relevant articles. Results: Toxicological hazards were reported in 110 studies. Exposure to cobalt and nickel mining were most associated with respiratory toxicity, while exposure to manganese mining was most associated with neurologic toxicity. Notably, no articles were identified that assessed lithium toxicity associated with mining exposure. Traumatic hazards were reported in six studies. Three articles reported infectious disease hazards, while six studies reported effects on mental health. Several studies reported increased health risks in children compared to adults. Conclusions: The results of this review suggest that occupational and environmental exposure to mining metals used in LIBs presents significant risks to human health that result in both acute and chronic toxicities. Further research is needed to better characterize these risks, particularly regarding lithium mining. [ABSTRACT FROM AUTHOR]

Background: Cobalt (Co) is a metal which is widely used in the industrial production. The previous studies found the toxic effects of environmental Co exposure on multiple organs. However, the correlation of blood Co concentration with lung function was inconsistent in patients with chronic obstructive pulmonary disease (COPD). Methods: All 771 stable COPD patients were recruited. Peripheral blood and clinical information were collected. The levels of blood Co and serum CC16 were measured. Results: Cross-sectional study suggested that the level of blood Co was inversely and dose-dependently related to lung function parameters. Each 1 ppm elevation of blood Co was related to 0.598 L decline in FVC, 0.465 L decline in FEV1, 6.540% decline in FEV1/FVC%, and 14.013% decline in FEV1%, respectively. Moreover, higher age, enrolled in winter, current-smoking, higher smoking amount, and inhaled corticosteroids prominently exacerbated the negative correlation between blood Co and lung function. Besides, serum CC16 content was gradually reduced with blood Co elevation in COPD patients. Besides, serum CC16 was positively correlated with lung function, and inversely related to blood Co. Additionally, decreased CC16 substantially mediated 11.45% and 6.37% Co-triggered downregulations in FEV1 and FEV1%, respectively. Conclusion: Blood Co elevation is closely related to the reductions of pulmonary function and serum CC16. CC16 exerts a significantly mediating role of Co-related to pulmonary function decrease among COPD patients. [ABSTRACT FROM AUTHOR]

The analysis of toxic and essential elements in human matrices is used in clinical diagnostics and for biomonitoring of different populations to study related health outcomes. This work aimed to develop fast and reliable methods for the analysis of a broad range of elements in liquid human matrices, such as whole blood, serum, and urine, with a similar setup for the three matrices and different analysis needs. An easy and fast‐forward dilute‐and‐shoot method for 33 elements (i.e., Ag, Al, As, B, Ba, Be, Bi, Cd, Ce, Co, Cr, Cu, Hg, I, Li, Mn, Mo, Ni, Pb, Pd, Pt, Sb, Se, Sn, Sr, Te, Th, Tl, U, V, W, Zn, and Zr) was developed. 200 µL of either sample material was diluted with an alkaline reagent to a volume of 4 mL in total. Sample dilution and preparation of matrix‐matched calibration standards were performed in 48‐well plates by an automated liquid handler. Diluted samples were analyzed by inductively coupled plasma mass spectrometry on a Perkin Elmer NexIon 300D ICP‐MS instrument equipped with an ESI‐FAST SC2DX autosampler in kinetic energy discrimination mode with helium as cell gas at either 4.8 mL or 5.7 mL and 1600 W RF generator power. The method validation results showed good accuracy for fresh human samples from an external quality assessment scheme with measured concentrations within the assigned concentration ranges. Good precision and reproducibility for most elements were demonstrated with variation coefficients below or far below 8% and 15% for whole blood, 8% and 10% for serum, and 10% and 10% for urine, respectively. The developed reagent and instrumental setup were applicable to all three matrices. This minimizes the risk of human errors when switching between analyses of the different sample matrices and allows a rapid and easy analysis of whole blood, serum, and urine within one day if needed. The method demonstrated robustness over time, withstanding minor changes in the preparation of working solutions and samples, instrumental analysis, and setup. Analysis of human real samples showed the method's applicability for 33 toxic and essential elements in whole blood, serum, and urine and at concentrations relevant to clinical diagnostics as well as biomonitoring. [ABSTRACT FROM AUTHOR]

CoMn2O4 (CMO) has been recognized as an effective peroxymonosulfate (PMS) activator; however, it still shows disadvantages such as limited reactive sites and metal leakage. Herein, an effective and environmentally friendly composite catalyst, CMO/Kln, was synthesized by anchoring CMO on kaolinite (Kln), a natural clay mineral with a special lamellar structure, to activate peroxymonosulfate (PMS) for the degradation of residue pharmaceuticals in water. The abundant hydroxyl groups located on the surface of Kln helped induce rich oxygen vacancies (OVs) into composite CMO/Kln, which not only acted as additional active sites but also accelerated working efficiency. In addition, compared with bare CMO, CMO/Kln showed lower crystallinity, and the adoption of the Kln substrate contributed to its structural stability with lower metal leaching after three rounds of reaction. The universal applicability of CMO/Kln was also verified by using three other pharmaceuticals as probes. This work shed light on the adoption of natural clay minerals in modifying CMO catalysts with promoted catalytic activity for the efficient and eco-friendly remediation of pharmaceuticals in wastewater. [ABSTRACT FROM AUTHOR]

Cell death is one of the most important mechanisms of maintaining homeostasis in our body. Ferroptosis and pyroptosis are forms of necrosis-like cell death. These cell death modalities play key roles in the pathophysiology of cancer, cardiovascular, neurological diseases, and other pathologies. Transition metals are abundant group of elements in all living organisms. This paper presents a summary of ferroptosis and pyroptosis pathways and their connection to significant transition metals, namely zinc (Zn), copper (Cu), molybdenum (Mo), lead (Pb), cobalt (Co), iron (Fe), cadmium (Cd), nickel (Ni), mercury (Hg), uranium (U), platinum (Pt), and one crucial element, selenium (Se). Authors aim to summarize the up-to-date knowledge of this topic. In this review, there are categorized and highlighted the most common patterns in the alterations of ferroptosis and pyroptosis by transition metals. Special attention is given to zinc since collected data support its dual nature of action in both ferroptosis and pyroptosis. All findings are presented together with a brief description of major biochemical pathways involving mentioned metals and are visualized in attached comprehensive figures. This work concludes that the majority of disruptions in the studied metals' homeostasis impacts cell fate, influencing both death and survival of cells in the complex system of altered pathways. Therefore, this summary opens up the space for further research. [ABSTRACT FROM AUTHOR]

In acidic paddy fields of South China, rice (Oryza sativa L.) faces the dual challenges of cadmium (Cd) toxicity and silicon (Si) deficiency. Although previous studies have highlighted the functions of Si application timing and strategies in mitigating Cd-stressed rice, the precise mechanisms underlying the health restoration of Cd-toxic rice and the assurance of grain safety remain elusive. This study explored Cd translocation and detoxification in the shoots of rice regulated by various Si fertilization regimes: Si(T) (all Si added before transplanting), Si(J) (all Si added at jointing), and Si(TJ) (half Si added both before transplanting and at jointing). The findings revealed that the regime of Si(TJ) was more beneficial to rice health and grain safety than Si(T) and Si(J). The osmotic regulators such as proline, soluble sugars, and soluble proteins were significantly boosted by Si(TJ) compared to other Si treatments, and which enhanced membrane integrity, balanced intracellular pH, and increased Cd tolerance of rice. Furthermore, Si(TJ) was more effective than Si(T) and Si(J) on the Cd sequestration in the cell wall, Cd bio-passivation, and the down-regulated expression of the Cd transport genes. The concentrations of Cd in the xylem and phloem treated with Si(TJ) were reduced significantly. Additionally, Si(TJ) facilitated much more Cd bound with the outer layer proteins of grains, and promoted Cd chelation and complexation by phytic acid, phenolics, and flavonoids. Overall, Si (TJ) outperformed Si(T) and Si(J) in harmonizing the phycological processes, inhibiting Cd translocation, and enhancing Cd detoxification in rice plant. Thereby the split Si application strategy offers potential for reducing Cd toxicity in rice grain. [ABSTRACT FROM AUTHOR]

Simple Summary: Prostate cancer is the most common cancer detected among men and it is the second leading cause of death. According to the WHO, cobalt is probably involved in carcinogenesis. However, there are no studies related to cobalt levels and survival in prostate cancer patients. The aim of this prospective study was to investigate the relationship between serum cobalt levels and survival among prostate cancer patients taking into consideration prostate cancer-specific deaths and non-cancer causes of death. Our findings, based on 261 Polish prostate cancer patients, show that individuals with high serum cobalt levels have a significantly worse survival compared to participants with low serum cobalt levels. Prostate cancer is the most common cancer diagnosed in men and the second leading cause of death in male cancer patients. The WHO suggests that cobalt is involved in the carcinogenesis of prostate cancer. There are, however, no studies associating cobalt levels and prostate cancer patient survival. In this study, 261 Polish prostate cancer (n = 261) patients were recruited into a prospective cohort between 2009 and 2015. Serum cobalt levels were measured using ICP-MS after prostate cancer diagnosis and before treatment. All study participants were assigned into quartiles (QI-QIV) based on the distribution of serum cobalt levels among censored patients. Univariable and multivariable COX regression models were used to calculate hazard ratios (HRs) for each serum cobalt level quartile. We found a significant relationship between high serum cobalt levels and poor prostate cancer patient total survival (HR = 2.60; 95% CI: 1.17–5.82; p = 0.02). In relation to prostate cancer patients who died as a result of other non-cancer causes, the association with high levels of cobalt was even stronger (HR = 3.67; 95% CI: 1.03–13.00; p = 0.04). The impact of high serum cobalt levels on overall survival of prostate cancer-specific-related deaths was not statistically significant. [ABSTRACT FROM AUTHOR]

Exogenous application of sodium nitroprusside (SNP) has previously been reported to trigger plant tolerance against a variety of environmental stresses. The present study was planned to investigate the possible role/s of exogenously applied SNP (50 or 100 μM) in alleviating cadmium (Cd)-induced effects on physio-biochemical processes, yield attributes, and grain quality traits of three fragrant rice cultivars, viz., Meixiangzhan-2 (MXZ), Guixiangzhan (GXZ), and Xiangyaxiangzhan (XYXZ) under 50 mg Cd kg−1 of soil. The results revealed that foliar spray of SNP (50 or 100 μM) on Cd-stressed rice plants reduced oxidative stress (lower hydrogen peroxide (H2O2), malondialdehyde (MDA), and electrolyte leakage (EL)) and improved the photosynthetic apparatus through higher chlorophyll contents, gas exchange attributes, and intact chloroplast configurations, and reduced Cd concentration in the leaves and grains of aromatic rice cultivars. The reduced levels of cellular ROS, MDA, and EL were related to the endogenous NO-mediated improvement in the activity of anti-oxidative enzymes and those involved during the ascorbate–glutathione cycle. However, among the different SNP levels, the foliar spraying of 50 μM of SNP was recorded to be the best treatment for fragrant rice growth, which increased grain yield by 42.06%, 46.03%, and 31.21%, and the quality trait of 2-acetyl-1-pyrroline (2-AP) content by 43.12%, 55.84%, and 35.72% in MXZ, GXZ, and XYXZ respectively, suggesting that GXZ is more responsive to SNP than MXZ and XYXZ fragrant rice cultivars. Collectively, our results deduced that cultivating the GXZ fragrant rice cultivar along with foliar application of 50 μM of SNP could sustain the grain yield and quality features of aromatic rice cultivation in heavy metal (especially Cd)-polluted soils. [ABSTRACT FROM AUTHOR]

Nitric oxide (NO) is a multifunctional signalling molecule involved in the regulation of plant ontogenesis and adaptation to different adverse environmental factors, in particular to osmotic stress. Understanding NO-induced plant protection is important for the improvement of plant stress tolerance and crop productivity under global climate changes. The root system is crucial for plant survival in a changeable environment. Damages that it experiences under water deficit conditions during the initial developmental periods seriously affect the viability of the plants. This work was devoted to the comparative analysis of the pretreatment of wheat seedlings through the root system with NO donor sodium nitroprusside (SNP) for 24 h on various parameters of redox homeostasis under exposure to osmotic stress (PEG 6000, 12%) over 0.5–24 h. The active and exhausted solutions of SNP, termed as (SNP/+NO) and (SNP/−NO), respectively, were used in this work at a concentration of 2 × 10−4 M. Using biochemistry and light microscopy methods, it has been revealed that osmotic stress caused oxidative damages and the disruption of membrane cell structures in wheat roots. PEG exposure increased the production of superoxide (O2•−), hydrogen peroxide (H2O2), malondialdehyde (MDA), and the levels of electrolyte leakage (EL) and lipid peroxidation (LPO). Stress treatment enhanced the activities of superoxide dismutase (SOD), ascorbate peroxidase (APX), catalase (CAT), the excretion of proline, and the rate of cell death and inhibited their division. Pretreatment with (SNP/+NO) decreased PEG-induced root damages by differently regulating the antioxidant enzymes under stress conditions. Thus, (SNP/+NO) pretreatment led to SOD, APX, and CAT inhibition during the first 4 h of stress and stimulated their activity after 24 h of PEG exposure when compared to SNP-untreated or (SNP/−NO)-pretreated and stress-subjected plants. Osmotic stress triggered the intense excretion of proline by roots into the external medium. Pretreatment with (SNP/+NO) in contrast with (SNP/−NO) additionally increased stress-induced proline excretion. Our results indicate that NO is able to mitigate the destructive effects of osmotic stress on the roots of wheat seedlings. However, the mechanisms of NO protective action may be different at certain periods of stress exposure. [ABSTRACT FROM AUTHOR]

The present investigation addresses the mechanical properties, wear behaviour, and high-temperature oxidation of cermets and hardmetals based on either Ti(C,N) or WC and a metal binder based on Fe15Ni or Fe15Ni10Cr. This study also includes a commercial-grade WC-Co for comparative purposes. The production of these materials involved a powder metallurgy and sinter-HIP processing route under identical conditions. It is found that WC-based materials have superior mechanical properties, including hardness, fracture toughness, transversal rupture strength (TRS), and wear response, compared to Ti(C,N)-based materials. However, the latter show better oxidation behaviour than the former. Notably, WC-FeNi exhibits a higher hardness and TRS than the commercial-grade material (an increase of 7% and 9%, respectively). The difference in wear behaviour is due to the difference in wear mechanisms. In this regard, cermets wear through a tribolayer of Ti and Fe oxides, while hardmetals primarily wear through abrasion from ploughing. Thus, hardmetals exhibit a lower coefficient of friction (COF) and wear rate than cermets. Furthermore, Ti(C,N)-based materials form a protective layer of TiO2, which enhances their integrity and reduces mass gain. The addition of Cr to the FeNi binder only appears to have a clear effect on the TRS of the materials. [ABSTRACT FROM AUTHOR]

Hyperthermia therapy refers to the elevating of a region in the body for therapeutic purposes. Different techniques have been applied for hyperthermia therapy including laser, microwave, radiofrequency, ultrasonic, and magnetic nanoparticles and the latter have received great attention in recent years. Magnetic hyperthermia in cancer therapy aims to increase the temperature of the body tissue by locally delivering heat from the magnetic nanoparticles to cancer cells with the aid of an external alternating magnetic field to kill the cancerous cells or prevent their further growth. This review introduces magnetic hyperthermia with magnetic nanoparticles. It includes the mechanism of the operation and magnetism behind the magnetic hyperthermia phenomenon. Different synthesis methods and surface modification to enhance the biocompatibility, water solubility, and stability of the nanoparticles in physiological environments have been discussed. Recent research on versatile types of magnetic nanoparticles with their ability to increase the local temperature has been addressed. [ABSTRACT FROM AUTHOR]

Copyright of Farmacia is the property of Societatea de Stiinte Farmaceutice Romania and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This study introduces a straightforward and effective amorphous ZrP/polyacrylonitrile composite ion exchange method for separating Li from the leachate of spent Li-ion batteries (NMC 111). The cathode materials were leached with a series of optimized experiments. The influence of operating variables, including the H2SO4 concentration, temperature, H2O2 concentration, and pulp density, on leaching efficiency was examined to determine the optimal conditions for sorption experiments. The leaching efficiencies of Li, Co, Ni, and Mn were found to be 99.9%, 99.5%, 98.8%, and 99.9%, respectively. Subsequently, batch sorption experiments were performed by using am-ZrP/PAN, including the determination of the effect of pH, sorption kinetics, and the sorption isotherm. The effect of pH on adsorption was examined in 1 mmol/L equimolar solutions of Li, Ni, Mn, and Co. Li was separated from Mn, Co, and Ni in the leaching liquor. The adsorbent for Mn, Co, and Ni sorption better fitted pseudo-second-order kinetics. High selectivity for Li was observed, even at the higher solution concentration of 15 mM Li, Ni, Co and Mn. In addition, the column loading process demonstrated selectivity for Li over Co, Ni, and Mn metal ions. The preliminary evaluation of the whole process with mass flow demonstrated that it would be feasible to achieve full separation and metal recovery by integrating a combined hydrometallurgical method in future studies. However, much work is still needed to develop a practical separation flowsheet. [ABSTRACT FROM AUTHOR]

Sol–gel synthesis parameters can significantly influence bioactive glass's structure, dissolution rates, and biocompatibility. For this study, various drying times and calcining temperatures were explored for a Zinc (Zn2+), Copper (Cu2+), and Cobalt (Co2+) doped silicate-based sol–gel bioactive glass composition. Surface area measurements showed an increase in the particle's surface area with decreased calcining temperature, whereas the particle size decreased with longer drying time and higher calcining temperature. The micropore area and volume showed an inverse relationship to the reduced particle size, with the microporosity increasing as the drying time was extended with the calcining temperature below the glasses' transition temperature (560–586 °C). A Kilchoanite (Ca3(Si2O7)) crystalline phase was present in each sample, and with increased calcining temperature above the Tg of the glasses, the degree of crystallinity increased. A drying time of 72 hrs with a calcining temperature of 450 °C showed an enhanced surface area (120 m2/g) with smaller average particle size (0.43 µm), increased microporosity, ion release rates within toxicity and pH limits, and growth inhibition for both gram-positive (S. aureus) and gram-negative (E. coli) bacteria. Highlights: A drying time of 72 hrs leads to smaller particle size and increased microporosity below the Tg. A calcining temperature of 450 °C increases surface area and decreases crystallinity. Zinc, copper, and cobalt ion releases were within the limits of cytotoxicity and pH. A drying time of 72 hrs and calcining temperature of 450 °C presented bacterial growth inhibition. [ABSTRACT FROM AUTHOR]

A cobalt-resistant strain of Neurospora crassa (cor) was obtained by repeated subculturing of the wild type on cobalt-containing agar medium. N. crassa cor is twentyfold more resistant to cobalt ions compared with the wild type. Resistance was stable on repeated subculturing of cor on cobalt-free media. N. crassa cor is also cross-resistant to nickel (fourfold), but not to zinc or copper. Higher concentrations of iron and magnesium ions are required to reverse growth inhibition due to cobalt toxicity in N. crassa cor, compared with the wild type. Germinating conidia and mycelia of the cor strain accumulated lower levels of cobalt ions compared with the parent N. crassa. The partial transport block for cobalt uptake is shown to be primarily due to decreased surface binding of cobalt to mycelia and cell walls. Efflux of mycelial cobalt was also observed in wild type and cobalt-resistant N. crassa. The characteristics of cor in comparison with wild type N. crassa are discussed in relation to the mechanisms of cobalt resistance. [ABSTRACT FROM AUTHOR]

Introduction. Heavy metal intoxication after arthroplasty is extremely rare but could be lethal. Case Report. We report the case of a 69-year-old woman, who presented intense systemic symptoms of chromium-cobalt intoxication after revision of per-operative fractured ceramic components with metal-on-polyethylene. Systemic toxicity occurred a year after surgery and expressed brutally with mostly central neurological symptoms. Chelation associated with revision surgery allowed rapid regression of all symptoms. Conclusion. Revision of fractured ceramic, even per-operatively, should not be done with metal-on-polyethylene components, in order to avoid potentially lethal metal intoxication. [ABSTRACT FROM AUTHOR]

Purpose: Although rare, fractures of ceramic components are difficult to revise, mainly due to the presence of residual ceramic debris that can cause catastrophic wear of the replacement components. Modern ceramic-on-ceramic bearings are suggested to improve outcomes of revision total hip arthroplasty (THA) for ceramic fractures. However, there are few published reports of mid-term outcomes of revision THA using ceramic-on-ceramic bearings. We evaluated clinical and radiographic outcomes of 10 patients who received ceramic-on-ceramic bearings during revision THA for ceramic fractures., Methods: All patients but one received fourth-generation Biolox Delta bearings. Clinical evaluation was performed using the Harris hip score at latest follow-up, and all patients received a radiographic evaluation to analyze the fixation of the acetabular cup and of the femoral stem. Osteolytic lesions and the presence of ceramic debris were noted., Results: After a mean follow-up of 8.0 years, there were no complications or implant failures, and all patients reported satisfaction with their implant. The average Harris hip score was 90.6. There was neither osteolysis nor loosening, but despite our extensive synovial debridement, ceramic debris was noted in the radiographs of five patients (50%)., Conclusion: We report excellent mid-term outcomes, with no implant failures after eight years despite ceramic debris being found in a significant proportion of patients. We conclude that modern ceramic-on-ceramic bearings are an advantageous option for the revision of THA due to the fracture of initial ceramic components., (© 2023. The Author(s) under exclusive licence to SICOT aisbl.)

Patients suffering from chronic mountain sickness (CMS) have excessive erythrocytosis. Low −level cobalt toxicity as a likely contributor has been demonstrated in some subjects. We performed a randomized, placebo controlled clinical trial in Cerro de Pasco, Peru (4380 m), where 84 participants with a hematocrit (HCT) ≥65% and CMS score > 6, were assigned to four treatment groups of placebo, acetazolamide (ACZ, which stimulates respiration), N -acetylcysteine (NAC, an antioxidant that chelates cobalt) and combination of ACZ and NAC for 6 weeks. The primary outcome was change in hematocrit and secondary outcomes were changes in PaO 2 , PaCO 2 , CMS score, and serum and urine cobalt concentrations. The mean (±SD) hematocrit, CMS score and serum cobalt concentrations were 69 ± 4%, 9.8 ± 2.4 and 0.24 ± 0.15 μg/l, respectively for the 66 participants. The ACZ arm had a relative reduction in HCT of 6.6% vs. 2.7% (p = 0.048) and the CMS score fell by 34.9% vs. 14.8% (p = 0.014) compared to placebo, while the reduction in PaCO 2 was 10.5% vs. an increase of 0.6% (p = 0.003), with a relative increase in PaO 2 of 13.6% vs. 3.0%. NAC reduced CMS score compared to placebo (relative reduction of 34.0% vs. 14.8%, p = 0.017), while changes in other parameters failed to reach statistical significance. The combination of ACZ and NAC was no better than ACZ alone. No changes in serum and urine cobalt concentrations were seen within any treatment arms. ACZ reduced polycythemia and CMS score, while NAC improved CMS score without significantly lowering hematocrit. Only a small proportion of subjects had cobalt toxicity, which may relate to the closing of contaminated water sources and several other environmental protection measures. [ABSTRACT FROM AUTHOR]

Metals are integral components of the natural environment, and their presence in the food supply is inevitable and complex. While essential metals such as sodium, potassium, magnesium, calcium, iron, zinc, and copper are crucial for various physiological functions and must be consumed through the diet, others, like lead, mercury, and cadmium, are toxic even at low concentrations and pose serious health risks. This study comprehensively analyzes the presence, importance, and consequences of metals in the food chain. We explore the pathways through which metals enter the food supply, their distribution across different food types, and the associated health implications. By examining current regulatory standards for maximum allowable levels of various metals, we highlight the importance of ensuring food safety and protecting public health. Furthermore, this research underscores the need for continuous monitoring and management of metal content in food, especially as global agricultural and food production practices evolve. Our findings aim to inform dietary recommendations, food fortification strategies, and regulatory policies, ultimately contributing to safer and more nutritionally balanced diets. [ABSTRACT FROM AUTHOR]

The aim of this study was to analyse the cytotoxicity of heavy metals (HMs) and nanoparticles (NPs) on populations of the ciliated protist Euplotes aediculatus. We used ecotoxicological tests, antioxidant assays, and the MixTOX tool in Microsoft® Excel to evaluate the toxic effect of HMs and NPs in single and binary mixtures on E. aediculatus and to detect the type of interaction between them. Based on our results, the order of toxicity was Cu > Cd >> Zn (1 h and 24 h) for HMs and ZnO > CuO >> TiO2 >> SiO2 (1 h) and CuO > ZnO >> TiO2 >> SiO2 (24 h) for NPs. The interaction between metals in binary mixtures was predominantly synergistic at low doses and antagonistic at high doses. The type of interaction depende on the metals present and their respective concentrations. Furthermore, both HMs and NPs were shown to trigger effective antioxidant responses in E. aediculatus. Our research highlights the importance of considering the combined effects of HMs and NP exposure and their potency in risk assessment. [ABSTRACT FROM AUTHOR]

Transition metal oxide (TMO)-based nanozymes have appeared as hopeful tools for antitumor applications due to their unique catalytic properties and ability to modulate the tumor microenvironment (TME). The purpose of this review is to provide an overview of the latest progress made in the field of TMO-based nanozymes, focusing on their enzymatic activities and participating metal ions. These nanozymes exhibit catalase (CAT)-, peroxidase (POD)-, superoxide dismutase (SOD)-, oxidase (OXD)-, and glutathione oxidase (GSH-OXD)-like activities, enabling them to regulate reactive oxygen species (ROS) levels and glutathione (GSH) concentrations within the TME. Widely studied transition metals in TMO-based nanozymes include Fe, Mn, Cu, Ce, and the hybrid multimetallic oxides, which are also summarized. The review highlights several innovative nanozyme designs and their multifunctional capabilities. Despite the significant progress in TMO-based nanozymes, challenges such as long-term biosafety, targeting precision, catalytic mechanisms, and theoretical supports remain to be addressed, and these are also discussed. This review contributes to the summary and understanding of the rapid development of TMO-based nanozymes, which holds great promise for advancing nanomedicine and improving cancer treatment. [ABSTRACT FROM AUTHOR]

The fabricated metal product industries were identified as producers of variable and heterogeneous pollution. Workers in these manufacturing facilities are exposed to multiple pollutants present at variable concentrations. Specific known adverse health effects include bladder cancer associated with metalworking fluid exposure and lung cancer associated with electroplating processes. To reduce the incidence of these adverse effects, the main challenge is to identify the most hazardous pollutants within this complex exposure environment and evaluate the corresponding health potentials. In this study, exposure indices were formulated to assess multiple metal exposures with the ultimate goal of providing relevant information for exposure reduction and control measures. Fifteen plants, including metal mold manufacturing, metal casting, and surface treatment plants, were investigated in terms of total concentration, summation of corresponding ratio to threshold limit value (STLVr), hazard index (HI), and incremental cancer risk. The results revealed that emissions of aluminum, iron, and manganese were primarily found in the metal mold manufacturing/casting plants, while emissions of chromium, nickel, and zinc were found in surface treatment plants. STLVr and HI were more useful than the total concentration for identifying hazardous metals, which were chromium and nickel, and could specify the facilities that were in need of control measures. As for cancer risk, the metal mold manufacturing/casting plants had lower risk than the surface treatment plants, and the contributing metals for these two plant types were cobalt and chromium, respectively. This study established a useful procedure to evaluate health hazards and cancer risk. The resulting information is useful for prioritizing mitigation control of multiple metal exposures. [ABSTRACT FROM AUTHOR]

Transition metal complexes have historically played a pivotal role in creating vibrant pigments utilized across artistic mediums such as ceramics, paintings, and glass mosaics. Despite their extensive historical use, our understanding of the mechanisms governing transition metal complex behavior has predominantly emerged in recent times, leaving numerous aspects of this process ripe for exploration. These complexes exhibit striking color variations under diverse conditions when employed in pigment formulations. This review utilizes a bottom-up scientific approach, spanning from microscopic to macroscopic scales, to unravel the molecular origins of the colors generated by transition metal complexes in pigments and ceramic glazes. Advanced spectroscopy techniques and computational chemistry play pivotal roles in this endeavor, highlighting the significance of understanding and utilizing analytical data effectively, with careful consideration of each technique's specific application. Furthermore, this review investigates the influence of processing conditions on color variations, providing valuable insights for artists and manufacturers aiming to enhance the precision and quality of their creations while mitigating environmental impact. [ABSTRACT FROM AUTHOR]

The anaerobic digestion process (AD) occurs via series of biochemical reactions, producing biogas as a renewable fuel and digestate, a rich by-product in trace elements (TEs), which has been directly disposed on soils as organic fertilizer. The application of mineral additives can result higher biogas production and CH4 yields in AD process; however, the chronical effects of these additives in digestates have not been reported in the literature. In this way, this research aims to analyze the chronic effects of digestates from swine manure (SD) and swine manure with iron ore tailings as additive (SDIOT) on survival and reproduction of Enchytraeus crypticus. The fresh samples were collected from sequential batch processes conducted at mesophilic conditions. The TEs and pH ranges in feedstock and digestates were determined in fresh matter (mg L−1), including analyses of heavy metals and nutrients, in which ranges concentrations were discussed according to biogas and CH4 productions, and compared with previous data of literature. These analyses were followed by chronic tests of digestates on reproduction of E. crypticus in Oxisols, in which tests performance met the validity criteria stablished according to ISO 16387 standard. The means of treatments were compared using the Holm–Sidak method, and the means of control groups were compared using t test (α = 0.05). The chronic effect on survival and reproduction of organisms might have occurred through synergistic effect of metals in digestates; however, more analyses must be needed to understand the toxicity effect of these products, specially under different climate conditions. Article Highlights: The application of swine manure resulted in a chronic effect to Enchytraeus crypticus. The synergistic effect of metals might have effects on organisms survival. Available fractions of metals and chemical properties of soils must also be evaluated. Climate change might influence on the speciation of metals within the soils. [ABSTRACT FROM AUTHOR]

Objective • To study the clinical features of two primary Sjogren's syndrome (pSS) patients with neurological symptoms as initial manifestations and review the related literature. Methods • The clinical data, response to treatment as well as prognosis of 2 cases were analyzed and followed up. Results • Case 1, female, initially presented progressive gait instability and distal sensory impairment at the age of 50. Clinical manifestations included spastic gait, sensory ataxia, conduction fascicular sensory impairment, as well as urination and defecation dysfunction. At the age of 58, this patient was unable to walk independently. The laboratory findings revealed a positive result for anti-nuclear antibody with a titer of 1: 1 000, anti-Sjogren's syndrome A (SSA)/Ro-52, anti- SSA/Ro-60, and anti-centromere antibodies. Labial salivary gland biopsy showed lymphocytes and plasma cells infiltration into the glandular tissues, interstitium, and lobules, with 2 foci/4 mm² (lymphocytes >50). The cranial magnetic resonance imaging exhibited bilateral symmetric hyperintensity in the brainstem, characterized by the "snake-eye sign". Electromyography examination revealed axonal impairment of the right peroneal nerve. The patient was treated with high-dose corticosteroid therapy in combination with immunosuppressants. She experienced remarkable improvement. After three months, she was able to walk with aids and take care of herself in daily life. Case 2, female, presented spasmodic torticollis since the age of 81 with unknown reason. She had a history of mild mucosal dryness of mouth and eyes, and painful knee for one year. Laboratory findings revealed positive results for anti-SSA/ Ro-52 and anti-SSA/Ro-60 antibodies, as well as hemoglobin of 86 g/L. Labial salivary gland biopsy demonstrated partial atrophy of the acini and the presence of 2 foci/4 mm² of lymphocytes and plasma cells infiltration into the stroma (lymphocytes>50). Electromyography examination showed reduced conduction velocity in the right median nerve. She got a significant relief after the treatment of immunosuppressants, antispasmodics, and muscle relaxants. Conclusion • Patients presenting initial symptoms such as complex forms of spastic paraplegia and cervical dystonia expand the clinical spectrum of pSS. In clinical practice, it is important to distinguish neurological involvement secondary to pSS from other primary neurological disorders. For patients with neurological impairments but without apparent etiology, it is crucial to screen relevant series of autoimmune antibodies. [ABSTRACT FROM AUTHOR]

There is a growing need for an economical and efficient method capable of removing heavy metals from residual water. The current contribution aimed to evaluate the capacity of onion peel, an abundant agroindustrial waste product, to remove divalent cobalt (Co2+) from aqueous solutions. Onion peel was submitted to proximal chemical analysis, and various operational factors involved in biosorption were tested. The most suitable temperature (30 °C), pH (7.0), and biosorbent particle size (300–800 µm) were found. With an initial Co2+ concentration of 380 mg L−1, the maximum capacity of Co2+ removal was 59.88 mg g−1 in 120 min. The pseudo-second order and Langmuir models provided the best fit to the experimental kinetics and equilibrium of Co2+ biosorption, respectively. The thermodynamic study evidenced an exothermic, non-spontaneous, and favorable reaction (ΔH0 = −5.78 kJ mol−1; ΔS0 = −21.13 J mol−1 K−1), suggesting the formation of stable bonds in the biosorbent-Co2+ complex. The carbonyl and hydroxyl groups apparently play a fundamental role in Co2+ removal, and electrostatic attraction, ion exchange, and chemisorption are the principal mechanisms. Thus, the biosorption of Co2+ by onion peel has potential as an economical, eco-friendly, efficient, and sustainable treatment for wastewater. [ABSTRACT FROM AUTHOR]

Background: The role of oxidative stress and inflammation in cobalt (Co) toxicity has been the focus of previous studies. Cinnamon and its main components have been reported to have protective effects in various tissues with antioxidant and anti-inflammatory effects. Aims: In this study, the protective effect of cinnamon extract (CE) against possible Co-induced heart, kidney, and liver damage in rats was investigated biochemically. Methods: Eighteen albino Wistar-type male rats were categorized into three groups (n = 6 per group): control (CG), CoCL2-administered (CoCL2), and CE + CoCL2-administered (CE + Co) groups. The CE + CoCL2 group was administered CE (100 mg/kg), and the CoCL2 and CG groups were administered distilled water orally by gavage. One hour after the administration, Co (150 mg/kg) was administered orally to the CE + CoCL2 and CoCL2 groups. This procedure was repeated once daily for 7 days. Then, biochemical markers were studied in the excised heart, kidney, and liver tissues. Results: CoCL2 increased oxidants and proinflammatory cytokines and decreased antioxidants in heart, kidney, and liver tissues. Heart, kidney, and liver tissue were affected by Co damage. CE treatment suppressed the CoCL2-induced increase in oxidants and proinflammatory cytokines and decrease in antioxidants in heart, kidney, and liver tissues. CE treatment has been shown to attenuate cardiac damage by reducing serum troponin I (TpI) and creatine kinase-MB (CK-MB), renal damage by reducing creatinine and blood urea nitrogen (BUN), and liver damage by reducing alanine aminotransferase (ALT) and aspartate aminotransferase (AST). Conclusion: Co induced the production of oxidants and proinflammatory parameters and antioxidant depletion in heart, kidney, and liver tissues of rats. Our experimental results show that CE protects heart, kidney, and liver tissues against oxidative and inflammatory changes induced by CoCLl2. [ABSTRACT FROM AUTHOR]

Botryococcus braunii, a colonial green microalga which is well-known for its capacity to synthesize hydrocarbons, has significant promise as a long-term source of feedstock for the generation of biofuels. However, cultivating and scaling up B. braunii using conventional aqua-suspended cultivation systems remains a challenge. In this study, we optimized medium components and light intensity to enhance lipid and hydrocarbon production in a multi-cultivator airlift photobioreactor. BBM 3N medium with 200 μmol/m2/s light intensity and a 16 h light–8 h dark regimen yielded the highest biomass productivity (110.00 ± 2.88 mg/L/day), as well as the highest lipid and hydrocarbon content. Cultivation in a flat-panel bioreactor resulted in significantly higher biomass productivity (129.11 ± 2.74 mg/L/day), lipid productivity (32.21 ± 1.31 mg/L/day), and hydrocarbon productivity (28.98 ± 2.08 mg/L/day) compared to cultivation in Erlenmeyer flasks and open 20-L raceway pond. It also exhibited 20.15 ± 1.03% of protein content including elevated levels of chlorophyll a, chlorophyll b, and carotenoids. This work is noteworthy since it is the first to describe fatty acid and hydrocarbon profiles of B. braunii during cobalt treatment. The study demonstrated that high cobalt concentrations (up to 5 mg/L of cobalt nitrate) during Botryococcus culture affected hydrocarbon synthesis, resulting in high amounts of n-alkadienes and trienes as well as lipids with elevated monounsaturated fatty acids concentration. Furthermore, pyrolysis experiments on microalgal green biomass and de-oiled biomass revealed the lipid and hydrocarbon compounds generated by the thermal degradation of B. braunii that facilitate extra economical value to this system. [ABSTRACT FROM AUTHOR]

Vascular calcification is a strong predictor of cardiovascular events. Essential metals play critical roles in maintaining human health. However, the association of essential metal levels with risk of aortic arch calcification (AoAC) remains unclear. We measured the plasma concentrations of nine essential metals in a cross‐sectional population and evaluated their individual and combined effects on AoAC risk using multiple statistical methods. We also explored the mediating role of fasting glucose. In the logistic regression model, higher quartiles of magnesium and copper were associated with the decreased AoAC risk, while higher quartile of manganese was associated with higher AoAC risk. The least absolute shrinkage and selection operator penalized regression analysis identified magnesium, manganese, calcium, cobalt, and copper as key metals associated with AoAC risk. The weighted quantile sum regression suggested a combined effect of metal mixture. A linear and positive dose–response relationship was found between manganese and AoAC in males. Moreover, blood glucose might mediate a proportion of 9.38% of the association between manganese exposure and AoAC risk. In summary, five essential metal levels were associated with AoAC and showed combined effect. Fasting glucose might play a significant role in mediating manganese exposure‐associated AoAC risk. [ABSTRACT FROM AUTHOR]

Here, we present the results of the synthesis, surface modification, and properties analysis of magnetite-based nanoparticles, specifically Co0.047Fe2.953O4 (S1) and Co0.086Fe2.914O4 (S2). These nanoparticles were synthesized using the co-precipitation method at 80 °C for 2 h. They exhibit a single-phase nature and crystallize in a spinel-type structure (space group Fd 3 ¯ m). Transmission electron microscopy analysis reveals that the particles are quasi-spherical in shape and approximately 11 nm in size. An observed increase in saturation magnetization, coercivity, remanence, and blocking temperature in S2 compared to S1 can be attributed to an increase in magnetocrystalline anisotropy due to the incorporation of Co ions in the crystal lattice of the parent compound (Fe3O4). The heating efficiency of the samples was determined by fitting the Box-Lucas equation to the acquired temperature curves. The calculated Specific Loss Power (SLP) values were 46 W/g and 23 W/g (under HAC = 200 Oe and f = 252 kHz) for S1 and S2, respectively. Additionally, sample S1 was coated with citric acid (Co0.047Fe2.953O4@CA) and poly(acrylic acid) (Co0.047Fe2.953O4@PAA) to obtain stable colloids for further tests for magnetic hyperthermia applications in cancer therapy. Fits of the Box-Lucas equation provided SLP values of 21 W/g and 34 W/g for CA- and PAA-coated samples, respectively. On the other hand, X-ray photoelectron spectroscopy analysis points to the catalytically active centers Fe2+/Fe3+ and Co2+/Co3+ on the particle surface, suggesting possible applications of the samples as heterogeneous self-heating catalysts in advanced oxidation processes under an AC magnetic field. [ABSTRACT FROM AUTHOR]

Aseptic implant loosening after a total joint replacement is partially influenced by material-specific factors when cobalt–chromium alloys are used, including osteolysis induced by wear and corrosion products and stress shielding. Here, we aim to characterize a hybrid material consisting of alumina-toughened zirconia (ATZ) ceramics and additively manufactured Ti-35Nb-6Ta (TiNbTa) alloys, which are joined by a glass solder. The structure of the joint, the static and fatigue shear strength, the influence of accelerated aging, and the cytotoxicity with human osteoblasts are characterized. Furthermore, the biomechanical properties of the functional demonstrators of a femoral component for total knee replacements are evaluated. The TiNbTa-ATZ specimens showed a homogenous joint with statistically distributed micro-pores and a slight accumulation of Al-rich compounds at the glass solder–TiNbTa interface. Shear strengths of 26.4 ± 4.2 MPa and 38.2 ± 14.4 MPa were achieved for the TiNbTa-ATZ and Ti-ATZ specimens, respectively, and they were not significantly affected by the titanium material used, nor by accelerated aging (p = 0.07). All of the specimens survived 107 cycles of shear loading to 10 MPa. Furthermore, the TiNbTa-ATZ did not impair the proliferation and metabolic activity of the human osteoblasts. Functional demonstrators made of TiNbTa-ATZ provided a maximum bearable extension–flexion moment of 40.7 ± 2.2 Nm. The biomechanical and biological properties of TiNbTa-ATZ demonstrate potential applications for endoprosthetic implants. [ABSTRACT FROM AUTHOR]