Search

Purpose: The purpose of this study was to develop flexible sensors for detection of different concentrations of bacteria, such as Pseudomonas aeruginosa and Staphylococcus aureus, in saline. Design/methodology/approach: The sensors were fabricated using ink-jet printing technology and they consist of a pair of silver interdigitated electrodes printed on mechanically flexible substrates – foil and paper. In house measurement setup for testing and characterization of sensors has been developed. Structural, electrical and mechanical properties of flexible sensors have been determined and compared. Findings: The characteristics of sensor – the resonant frequency as a function of different concentrations of each bacteria – are presented. The obtained results demonstrate different resonant frequencies for each dilution of Pseudomonas aeruginosa and Staphylococcus aureus in physiological saline. Research limitations/implications: Both sensors showed accurate measurements of bacterial count, which can be achieved with detection of resonant frequency, and this is reflective of the number of bacterial cells within a sample. Practical implications: The findings suggest that the newly developed method based on measuring resonant frequency corresponds well with bacterial cell count, thus establishing a new proof-of-concept that such method can have significant applications in bacterial cell counting that are economic and easily maintained. Social implications: Fast, cost-effective, accurate and non-invasive method for detection of different bacteria from saline was developed. Originality/value: For the first time, comparison between performances of flexible sensors on foil and paper for bacteria detection is demonstrated. Almost linear dependence between shift of resonant frequency of developed sensors and concentration of bacteria has been obtained. [ABSTRACT FROM AUTHOR]

Airflow sensor is a crucial component for monitoring environmental airflow conditions in many engineering fields, especially in the field of aerospace engineering. However, conventional airflow sensors have been suffering from issues such as complexity and bulk in structures, high cost in fabrication and maintenance, and low stability and durability. In this work, we developed a facile direct-writing method for fabricating a low-cost piezoresistive element aiming at high-performance airflow sensing, in which a commercial pen was utilized to drop solutions of single-walled carbon nanotubes onto tissue paper to form a piezoresistive sensing element. The encapsulated piezoresistive element was tested for electromechanical properties under two loading modes: one loading mode is the so-called pressure mode in which the piezoresistive element is pressed by a normal pressure, and another mode is the so-called bending mode in which the piezoresistive element is bended as a cantilever beam. Unlike many other developed airflow sensors among which the sensing elements are normally employed as cantilever beams for facing winds, we designed a fin structure to be incorporated with the piezoresistive element for airflow sensing; the main function of the fin is to face winds instead of the piezoresistive element, and subsequently transfer and enlarge the airflow pressure to the piezoresistive element for the normal pressure loading mode. With this design, the piezoresistive element can also be protected by avoiding experiencing large strains and direct contact with external airflows so that the stability and durability of the sensor can be maintained. Moreover, we experimentally found that the performance parameters of the airflow sensor could be effectively tuned by varying the size of the fin structure. When the fin sizes of the airflow sensors were 20 mm, 30 mm, and 40 mm, the detection limits and sensitivities of the fabricated airflow sensors were measured as 8.2 m/s, 6.2 m/s, 3.2 m/s, 0.0121 (m/s)−2, 0.01657 (m/s)−2, and 0.02264 (m/s)−2, respectively. Therefore, the design of the fin structure could pave an easy way for adjusting the sensor performance without changing the sensor itself toward different application scenarios. [ABSTRACT FROM AUTHOR]

A flexible pressure sensor with a rudimentary, ultra-low cost, and solvent-free fabrication process is presented in this paper. The sensor has a graphite-on-paper stacked paper structure, which deforms and restores its shape when pressure is applied and released, showing an exceptionally fast response and relaxation time of ≈0.4 ms with a sensitivity of −5%/Pa. Repeatability of the sensor over 1000 cycles indicates an excellent long-term stability. The sensor demonstrated fast and reliable human touch interface, and successfully integrated into a robot gripper to detect grasping forces, showing high promise for use in robotics, human interface, and touch devices. [ABSTRACT FROM AUTHOR]