Search

Chlorite is present extensively in many types of deposits. The mechanism underlying the chemical variations in chlorite remains unclear. The Naruo porphyry deposit is a giant copper porphyry deposit in the Duolong ore district of Tibet. Chlorite, which is abundant in this deposit, has yet to be studied systematically; hence, we used principal component analysis (PCA) to assess the correlation between chlorite elements and various types of mineral deposits. We then conducted a preliminary investigation into its mineralogy and geochemistry to better understand its formation process and identify potential prospecting indicators. The PCA method proved effective in discerning two distinctive element signatures within the chlorite and categorising them into four deposit types: orogenic Au deposits, granite-type U deposits, and skarn-type Sn deposits that exhibit high FeOand low MgO distinguishing them from porphyry copper deposits. The chlorite in the Naruo deposit is classified as either early metasomatic (M-type), consisting mainly of clinochlore, or late hydrothermal (H-type), primarily consisting of clinochlore and chamosite. This classification suggests that H-type chlorite formed in a reductive environment conducive to Cu precipitation at medium temperatures (255°C-342°C). Al-Si and Fe-Mg substitutions were found to be the primary processes involved in its generation. Additionally, from the mineralisation centre outwards, there was an observed decrease in Si content as well as the Fe/(Fe+Mg) ratio in H-type chlorite, along with decreases in temperature, sulphur, and oxygen fugacity of allchlorites; conversely, increases were observed for Al content along with Mg and Mn elements in H-type chlorite. Chlorite is useful for exploring porphyry copper systems as an indicator mineral. [ABSTRACT FROM AUTHOR]

The Tiegelongnan is the first discovered porphyry–epithermal Cu (Au) deposit of the Duolong ore district in Tibet, China. In order to constrain the thermal history of this economically valuable deposit and the rocks that host it, eight samples were collected to perform a low‐temperature thermochronology analysis including apatite fission track, apatite, and zircon (U‐Th)/He. Apatite fission track ages of all samples are between 34 ± 3 and 67 ± 5 Ma. Mean apatite (U‐Th)/He ages show wide distribution, ranging from 29.3 ± 2.5 to 56.4 ± 9.1 Ma. Mean zircon (U‐Th)/He ages range from 79.5 ± 12.0 to 97.9 ± 4.4 Ma. The exhumation rate of the Tiegelongnan deposit was 0.086 km m.y.−1 between 98 and 47 Ma and decreased to 0.039 km m.y.−1 since 47 Ma. The mineralized intrusion was emplaced at a depth of about 1400 m in the Tiegelongnan deposit. Six cooling stages were determined through HeFTy software according to low‐temperature thermochronology and geochronology data: (i) fast cooling stage between 120 and 117 Ma, (ii) fast cooling stage between 117 and 100 Ma, (iii) slow cooling stage between100 and 80 Ma, (iv) fast cooling stage between 80 and 45 Ma, (v) slow cooling stage between 45 and 30 Ma, and (vi) slow cooling stage (<30 Ma). Cooling stages between 120 and 100 Ma are mainly caused by magmatic–hydrothermal evolution, whereas cooling stages after 100 Ma are mainly caused by low‐temperature thermal–tectonic evolution. The Bangong–Nujiang Ocean subduction led to the formation of the Tiegelongnan ore deposit, which was buried by the Meiriqiecuo Formation andesite lava and thrust nappe structure; then, the Tiegelongnan deposit experienced uplift and exhumation caused by the India–Asia collision. [ABSTRACT FROM AUTHOR]

The article presents a study to determine geological importance of rhenium (Re)-osmium (Os) isotopic dating of molybdenites in the Galale skarn copper (Cu)-gold (Au) deposit in Tibet, China. Topics discussed include determination of the age of granodiorite by using the laser ablation-inductively coupled plasma-mass spectrometry, isochron ages of Re-Os testing, and galale deposit and gaerqiong deposit resulting from magma-mineralization.

The Zegulangbei deposit develops a complete porphyry metallogenetic system, whose magmatic emplacement and mineralization was similarly related to an isolated apophysis derived from a uniform shallow magmatic chamber as the Main deposit. Jiama is a complex porphyry metallogenetic system composed of several isolated magmatic-hydrothermal centers. Multi-types of mineralization and alteration coexist among these metallogenetic centers, partially overlapped, developed with complicated and various metallogenic elements. [Display omitted] • Geological features of Zegulangbei deposit were identified in the Jiama ore district. • Precise geochronology redefine the magmatism, alteration and mineralization age. • Main deposit and Zegulangei deposit have originated from the same magma source. • Jiama is a polycentric, complex porphyry mineralization system. Jiama is a typical giant-scale collisional-type porphyry mineralization system of in the Gangdese metallogenic belt, Tibet. The Zegulangbei deposit is located in the northern part of the ore district, which was a recent discovery. In the Zegulangbei deposit, intrusions have developed in multiple stages and led to the formation of complex porphyry intrusions (2# porphyries), of which granodiorite porphyry and Ⅱ-quartz diorite porphyry occurred related to mineralization. Hydrothermal alteration surrounding the 2# porphyries is characterized by potassic, phyllic, and chlorite–sericite alteration, with minor propylitization, argillization and tourmalinization. Furthermore, veinlet-disseminated copper and molybdenum mineralization mainly occurred within the potassic and phyllic alteration zones. Partial copper mineralization developed within the chlorite–sericite alteration zone. The mineralization is comprised of porphyry Cu–Mo, hornfels Cu–Mo and skarn Cu–polymetallic ore bodies. Hydrothermal vein system developed well, including 5-staged veins (M-, A-, B-, C-, and D-type vein). The similar ages of intrusive rocks (15.8–14.5 Ma, U–Pb), biotite and sericite alteration minerals (15.04–15.02 Ma, 40Ar–39Ar), and molybdenite (14.9 Ma, Re–Os) indicate that the intermediate–felsic magmatic rock emplacement triggered the hydrothermal alteration and mineralization in the Zegulangbei deposit. Geochemistry and Sr–Nd–Pb isotopes of the intrusions in Zegulangbei are consistent with those of the intrusions in the Main deposit (1# porphyries) and the Miocene adakites that developed in the eastern Gangdese belt, implying they were generated from the partial melting of the thickened phlogopite-bearing juvenile crust that had been reworked by diapirs of the arc magma during subduction. The evidence presented in this study suggests that Zegulangbei developed a complete porphyry Cu–polymetallic mineralization system, which was related to the same magma chamber in the upper crust that caused the mineralization in the Main deposit. [ABSTRACT FROM AUTHOR]

The article discusses a study that focuses on the minerals, geological alteration and fluid basics of the first high sulfidation epithermal-porphyry copper-gold deposits in Tibet, China. Topics discussed include discovery of some new copper-sulfur and copper-iron-sulfur minerals; role of temperature and salinity in fluid inclusions and mixing of meteoricwater and porphyry fluid to form deposits in low temperature and salinity.

The article discusses the petrogeochemistral features of the acid intrusive rocks in Zhaxikang Deposit, Xizang Region. Topics discussed include geochemical analysis of granite porphyry samples that revealed high alumina, high silica and low magnesium oxide; rare earth element geochemistry of granite porphyry samples; and positive Europium (Eu) anomalies in which concentration of Eu increases in the mineral.

The Longmala deposit is a representative of the skarn Pb-Zn-Cu deposits found in the Nyainqêntanglha area of Tibet, China. The mineralization is hosted by skarn and marble of the Permian Wululong Formation intruded by an early Eocene biotite monzogranite, which is associated with the Pb-Zn-Cu mineralization. The genesis of the deposit is related to a four-stage progression involving: Stage I involves the development of prograde skarn; Stage II is a pre-ore retrograde skarn; Stage III is the emplacement of quartz-sulfides ore; and Stage IV is the emplacement of post-ore carbonate. The biotite monzogranite is a high-K calc-alkaline highly fractionated I-type granite characterized by its elevated SiO 2 (68.38–72.62 wt%), Fe T (4.09–6.19 wt%), and K 2 O + Na 2 O (7.82–8.33 wt%) contents. Its aluminum saturation index of 0.97–0.99 and a high differentiation index of 79–86 are indicative of a last-stage fractionation of the magma. The monzogranite is relatively enriched in light rare-earth elements, Th, U, and Rb, depleted in Sr, Ba, K, Nb, P, and Ti, and has a negative Eu anomaly. The εHf (t) values (−6.2 to +1.5), two-stage Hf model ages (average T DM2 = 1224 Ma) for zircons, and whole rock Pb isotopic compositions ( 206 Pb/ 204 Pb = 18.806–18.938, 207 Pb/ 204 Pb = 15.676–15.697, and 208 Pb/ 204 Pb = 39.234–39.376) indicate that the source of the magma is the crust of Lhasa Terrane. The study of fluid inclusions from each of the four stages mentioned above show that garnet and diopside from the prograde skarn (Stage I) are characterized by high temperatures and high oxygen fugacity indicative of magmatic fluids. The succeeding mineralization (Stage III) is characterized by moderate to high temperature and a reducing fluid, and final carbonate veining (Stage IV) with a decreased fluid temperature and salinity. The δ 18 O w values range from 1.3 to 10.8‰, and the δD w values are −123.5 to −93.4‰, indicating that the ore-forming fluids were derived from mixture magmatic and meteoric fluids, and the δ 34 S values of sulfides have a relatively narrow range of 0.3–3.6‰, suggestive of a magmatic source. The 206 Pb/ 204 Pb (18.571–18.722), 207 Pb/ 204 Pb (15.707–15.796), and 208 Pb/ 204 Pb (39.116–39.448) values of sulfides show that ore-forming metals were derived from the crust in the Lhasa Terrane. Major and trace elements characteristics of the ore-associated biotite monzogranite, combined with the dating results, suggest that the Longmala deposit were formed within the India-Asia continental-collision tectonic setting. [ABSTRACT FROM AUTHOR]

Stable Zn isotopes may be applied to trace the source of ore-forming metals in various types of Pb Zn deposits. To test this application, Zn and Pb isotope systematics for sulfides and associated basement rocks as well as Fe Mn carbonates (gangue) from the Zhaxikang Pb Zn deposit in South Tibet have been analyzed. The basement in this region includes metamorphosed mafic to felsic rocks (dolerite, quartz diorite, rhyolite porphyry, pyroclastics and porphyritic monzogranite). These rocks have similar δ 66 Zn values of 0.33 to 0.37‰, with an average value of 0.36 ± 0.03‰ (2σ), except for the more evolved porphyritic monzogranite that has a heavier value of 0.49‰. Fe Mn carbonates are present as hydrothermal veins and were probably precipitated from magmatic fluids. They have an average δ 66 Zn value of 0.27 ± 0.05‰, which is slightly lighter than the basement rocks, possibly representing δ 66 Zn isotopic compositions of the hydrothermal fluids. Sphalerite and galena have similar Zn isotopic compositions with δ 66 Zn ranging from 0.03 to 0.26‰ and 0.21 to 0.28‰, respectively. Considering the Zn isotope fractionation factor between sphalerite and fluids of − 0.2‰ at ~ 300 °C as reported in literature, hydrothermal fluids from which these sulfides precipitated will have δ 66 Zn values of ca. 0.39 ± 0.10‰, which are consistent with the values of basement rocks and the Fe Mn carbonates. This similarity supports a magmatic-hydrothermal origin of the Zhaxikang Pb Zn deposit. Both Pb and S isotopes in these sphalerite and galena show large variations and are consistent with being derived from a mixture of basement and sedimentary rocks in various proportions. Zn isotopic compositions of the sulfides significantly extend the range of regional basement rocks, suggesting that sedimentary rocks (e.g., shales) are also a significant source of Zn. However, the Zn isotopic compositions of sphalerite and galena differ from those of marine carbonates and those of typical SEDEX-type deposits (e.g. Kelley et al., 2009), confirming a magmatic-hydrothermal model. Combined with regional geological observations and the age constraints of ~ 20 Ma (Zheng et al., 2012, 2014), the results of our investigation indicate that the Zhaxikang Pb Zn deposit is most likely a magmatic-hydrothermal deposit. [ABSTRACT FROM AUTHOR]

We report the copper isotopic composition of Cu sulfides in the Tiegelongnan high-sulfidation (HS) copper deposit, Tibet, and investigate the possible application of Cu isotopes to mineral exploration. The copper isotopic values of samples from four drill holes display consistent progressive increase with depth to 400 m below surface, with an overall variation of δCu of up to 7.60‰ (−4.76 to 2.84‰). Such a large range is very different from that observed in Cu porphyry deposits which commonly exhibit a small δCu range (<1‰), with decreasing values with depth. The large δCu variation is likely of supergene origin and reflects strong leaching under oxidized conditions. The systematic increase of δCu with depth can be explained by the release of isotopically heavy Cu at the top and its transport downward, which is supported by the coupling of positive δCu values with high Cu grade and the occurrence of both negative and positive δCu values in two drill holes. Mass-balance consideration on the basis of Cu isotopes can indicate mineralized zones which have been eroded or have not been found yet. Such mineralized targets, if buried at depth, could be located using Cu isotopes. [ABSTRACT FROM AUTHOR]

The Jiama deposit, located in the eastern part of the well-known Gangdese Metallogenic Belt on the Tibetan Plateau, is the largest porphyry Cu–polymetallic system in the region, with the largest exploration budget, and is economically viable in the Gangdese Belt to undergo large-scale development. The deposit is well preserved and has experienced little erosion. The proven resources of the deposit are 7.4 Mt Cu, 0.6 Mt Mo, 1.8 Mt Pb + Zn, 6.65 Moz Au, and 360.32 Moz Ag. The results presented in this paper are based on geological and tectonic mapping, geological logging, and other exploration work performed by members of the Jiama Exploration Project Team over a period of 6 years. We propose that the Jiama porphyry Cu–polymetallic system is composed of skarn Cu–polymetallic, hornfels Cu–Mo, porphyry Mo ± Cu, and distal Au mineralization. The development of skarn Cu–polymetallic orebodies at the Jiama deposit was controlled mainly by the contact zone between porphyries and marbles, an interlayer detachment zone, and the front zone of a gliding nappe structure. The hornfels Cu–Mo and porphyry Mo ± Cu orebodies were controlled mainly by a fracture system related to intrusions, and the distal Au mineralization resulted from late-stage hydrothermal alteration. On the basis of field geological logging, optical microscopy, and chemical analysis, we verify that the alteration zones in the Jiama deposit include potassic, phyllic, propylitic, and argillic alteration, with a local lithocap, as well as endoskarn and exoskarn zones. The endoskarn occurs mainly as epidote alteration in quartz diorite porphyry and granite porphyry, and is cut by massive andradite veins. The exoskarn includes garnet–pyroxene and wollastonite skarn, in which the mineralogy and mineral chemical compositions display an outward zonation with respect to the source porphyry. From the proximal skarn to the intermediate skarn to the distal skarn, the garnet/pyroxene ratio varies from > 20:1 to ~ 10:1 to ~ 5:1, the garnet color varies from red-brown to brown-green to green-yellow, and the average composition of garnet varies from Ad 80.1 Gr 18.9 (Sp + Py) 1.0 to Ad 76.3 Gr 23 (Sp + Py) 0.7 to Ad 59.5 Gr 39.5 (Sp + Py) 1.0 , respectively. The pyroxene is not as variable in composition as the garnet, and is primarily light green to white diopside with a maximum hedenbergite content of ~ 20% and an average composition of Di 88.6 Hd 8.9 Jo 2.5 . From the proximal skarn to the intermediate skarn to the distal skarn, the mineralization changes from Cu–Mo to Cu ± Mo to Pb–Zn ± Cu ± Au ores, respectively. The wollastonite skarn displays no zonation and hosts mainly bornite mineralization. The Cu and Mo mineralization is closely related to the potassic and phyllic zones in the porphyry–hornfels. Zircons from four mineralized porphyries yield U–Pb ages of 15.96 ± 0.5 Ma, 15.72 ± 0.14 Ma, 15.59 ± 0.09 Ma, and 15.48 ± 0.08 Ma. The Re–Os ages of molybdenite from the skarn, hornfels, and porphyry are 15.37 ± 0.15 Ma, 14.67 ± 0.37 Ma, and 14.66 ± 0.27 Ma, respectively. The present results are consistent with the findings of previous research on fluid inclusions, isotopes, and other such aspects. On the basis of the combined evidence, we propose a porphyry Cu–polymetallic system model for the Jiama deposit and suggest a regional exploration strategy that can be applied to prospecting for porphyry-skarn mineralization in the Lhasa area. [ABSTRACT FROM AUTHOR]

Copper resources in China are rich, but imported copper products are still required. Researches on metallogenic regularity of major types of copper deposits by geologists have involved in worldwide classification, significant copper belts, representative copper deposits, etc. Studies on metallogenic regularity of copper deposits in China also have made achievements with a long-term work. Combined with latest exploration advances obtained in recent ten years, this review aims to conclude the achievements of researches on copper metallogenic regularity in China. Based on data of 814 copper deposits and other ore (mineralized) occurrences, ten prediction types of copper deposits have been suggested. Porphyry and skarn copper ores are taken as the key targets. Porphyry copper deposits are the most important one which concentrate in Gangdese, Changdu-Sanjiang, Dexing and East Tianshan. The Cenozoic and Mesozoic are the major metallogenic epochs. Four main metallogenic epochs are been studied based on the copper ore geochronological data including Precambrian Era (Archean and Proterozoic), Paleozoic Era, Mesozoic Era and Cenozoic Era. Based on the study of metallogenic series of ore deposits in China, twenty-seven metallogenic series of copper deposits are proposed. This is suggested to deepen the study of metallogenic regularity of copper ore and provide the theory guide for copper resources prediction in China. [ABSTRACT FROM AUTHOR]

The Jiama copper deposit is one of the largest deposits recently found in Tibet and is composed of three types of mineralization including skarn, hornfels and porphyry. To investigate the relationship between mineralization, structure and alteration, we report new zircon U-Pb age and present field observations on the deformation characteritics associated with the copper mineralization in Jiama. Two main periods of deformation were identified, represented by D1 and D2 in Jiama. The first deformation ( D1) occurred around 50 Ma, whereas the second deformation ( D2) that was closely related to mineralization occurred later. Previous zircon U-Pb and molybnite Re-Os dating results indicate that the mineralizatoin occurred at ∼15 Ma and thus the D1 regional deformation significantly occurred before the mineralization time, although the D1 deformation probably provided important space for the development of significant copper deposition. Our new mapping and observations on the D2 deformation demonstrate that the mineralization was closely coeval with or slightly later than the time of D2 deformation. The new U-Pb zircon age further indicates that the aplite formed in ∼17.0 Ma and thus the D2 deformation happened later than this time because the D2 deformation cut across the aplite, which is proposed to be the key control for copper mineralization. Altered laminated hornfels including three types of alteration ( A-, K- and S-type) were found spatially associated with the D2 deformation. The type- A is mainly silicification, with fine sericite or chlorite, as well as abundant disseminated sulphides on fracture surfaces; the type- S is mainly fine-grained silicification with patches of chlorite, epidote and common sulphides; the type- K (potassic alteration) appears to be fine-grained biotite. Such types of alteration indicate the presence of skarns at depth where ore shoots are located. Taken together, the multiple structural-magmatic-mineralization events contributed to the formation of the supergiant Jiama porphyry copper deposit in Tibet. The results have general implication for regional exploration. [ABSTRACT FROM AUTHOR]

The article offers information on the geochemical features and prospecting development of Southern Tiegelong Giant Epithermal Copper Deposit in Tibet, China. Topics discussed include types of metallic sulphides ores detected by energy spectroscopy scanning; metallogenic stages of mineralization such as sedimentary diagenesis and hydrothermal mineralization; and formation of deposits in Early Cretaceous era.

The article discusses the research study conducted that examines the genetic types of mineral deposits of Xiongcun District in Gangdese porphyry copper belt in Tibet, People's Republic of China (PRC). It mentions the genesis of the Gangdese deposit as epithermal, porphyry, and porphyry-epithermal deposit. It further mentions that the deposit is characterized by developed pyrrhotite and ilmenite, that have similar mineral assemblages to the reduced porphyry copper-gold deposit (RPCDs).

The article offers information on the geological features of the porphyry deposit of Jiama in Tibet, China. Topics discussed include scientific and economic significance of Jiama porphyry at Gangdese metallogenic belt due to the presence of copper metal reserves, molybdenum, and silver reserves, Copper-Molybdenum ore found in bathy-hidden porphyry, and disseminated ore and veinlet ore as the main types of ores found in the porphyry.

The Baomai porphyry Cu-Mo deposit is a newly discovered deposit located in the northern section of the Yulong porphyry Cu belt, eastern Tibet. It is associated with Eocene biotite monzogranite intrusions that were emplaced into Paleoproterozoic Ningduo Group and Middle-Upper Triassic sedimentary rocks. A biotite monzogranite porphyry with a zircon U-Pb age of 42.7 Ma was intruded by several post-ore diorite porphyry dikes (ca. 37.8 Ma). Alteration mineral assemblages consistent with argillic, phyllic, and hornfels were identified in ore-bearing porphyries and host rocks at Baomai. Argillic and phyllic alteration assemblages are spatially related to high-grade Cu and Mo mineralization, whereas hornfels alteration is accompanied by weak Cu mineralization. Molybdenite from the mineralized porphyry returned a Re-Os isochron age of 42.6 Ma, and is considered to represent the age of porphyry-style mineralization at the deposit. Ore-bearing porphyries in Baomai are high-K (K 2 O/Na 2 O >1), alkaline-rich intrusions rich in LREE, LILE (e.g., Rb, U, K), depleted in HFSE (e.g., Nb, Ta, P and Ti) and contain absent or slightly negative Eu anomalies and no significant Ce anomalies. Slightly high 87 Sr/ 86 Sr ratios (0.7064–0.7076), low ε Nd(t) values (−2.5 to −4.6), uniform ( 206 Pb/ 204 Pb) i ratios (18.70–18.75) and positive ε Hf(t) values (0–5.3) of ore-bearing porphyries at Baomai indicate that they share the same or similar petrogenesis to other mineralized porphyries within the Yulong porphyry Cu belt. The porphyries were likely generated from partial melting of phlogopite-bearing amphibolite or amphibolite eclogite with a low degree of crystal fractionation, and related to enrichment mantle (EMII) transformed or mixed by older subducted slab-derived fluid. Actually, there are no significant three stages of ore-bearing magmatic activities in Yulong porphyry Copper belt (Hou et al., 2003b), Eocene intrusions (37–43 Ma) and regional strike slip faulting were all important factors in controlling the formation of these Cu-polymetallic deposits during the Eocene India-Tibetan collision. [ABSTRACT FROM AUTHOR]

Abstract: The Lanping Basin in the Nujiang‐Lancangjiang‐Jinshajiang (the Sanjiang) area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of large unique sediment‐hosted Pb‐Zn polymetallic deposits or ore districts, such as the Baiyangping ore concentration area which is one of the representative ore district. The Baiyangping ore concentration area can be divided into the east and west ore belts, which were formed in a folded tectogene of the India‐Asia continental collisional setting and was controlled by a large reverse fault. Field observations reveal that the Mesozoic and Cenozoic sedimentary strata were outcropped in the mining area, and that the orebodies are obviously controlled by faults and hosted in sandstone and carbonate rocks. However, the ore‐forming elements in the east ore belt are mainly Pb‐Zn‐Sr‐Ag, while Pb‐Zn‐Ag‐Cu‐Co elements are dominant in the west ore belt. Comparative analysis of the C‐O‐Sr‐S‐Pb isotopic compositions suggest that both ore belts had a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata; the ore‐forming fluids were originated from formation water and precipitate water, which belonged to basin brine fluid system; sulfur was from organic thermal chemical sulfate reduction and biological sulfate reduction; the metal mineralization material was from sedimentary strata and basement, but the difference of the material source of the basement and the strata and the superimposed mineralization of the west ore belt resulted in the difference of metallogenic elements between the eastern and western metallogenic belts. The Pb‐Zn mineralization age of both ore belts was contemporary and formed in the same metallogenetic event. Both thrust formed at the same time and occurred at the Early Oligocene, which is consistent with the age constrained by field geological relationship. [ABSTRACT FROM AUTHOR]

The newly discovered Zhunuo porphyry Cu-Mo-Au deposit is located in the western part of the Gangdese porphyry copper belt in southern Tibet, SW China. The granitoid plutons in the Zhunuo region are composed of quartz diorite porphyry, diorite porphyry, granodiorite porphyry, biotite monzogranite and quartz porphyry. The quartz diorite porphyry yielded zircon U-Pb ages of 51.9±0.7 Ma (Eocene) using LA-ICP-MS, whereas the diorite porphyry, granodiorite porphyry, biotite monzogranite and quartz porphyry yielded ages ranging from 16.2±0.2 to 14.0±0.2 Ma (Miocene). Cu-Mo-Au mineralization is mainly hosted in the Miocene granodiorite porphyry. Samples from all granitoid plutons have geochemical compositions consistent with high-K calc-alkaline series magmatism. The samples display highly fractionated light rare-earth element (REE) distributions and heavy REE distributions with weakly negative Eu anomalies on chondrite-normalized REE patterns. The trace element distributions exhibit positive anomalies for large-ion lithophile elements (Rb, K, U, Th and Pb) and negative anomalies for high-field-strength elements (Nb and Ti) relative to primitive mantle-normalized values. The Eocene quartz diorite porphyry yielded ∊Nd( t) values ranging from -3.6 to -5.2, (87Sr/86Sr)i values in the range 0.7046-0.7063 and initial radiogenic Pb isotopic compositions with ranges of 18.599-18.657 206Pb/204Pb, 15.642-15.673 207Pb/204Pb and 38.956-39.199 208Pb/204Pb. In contrast, the Miocene granitoid plutons yielded ∊Nd( t) values ranging from -6.1 to -7.3 and (87Sr/86Sr)i values in the range 0.7071-0.7078 with similar Pb isotopic compositions to the Eocene quart diorite. The Sr-Nd-Pb isotopic compositions of the rocks are consistent with formation from magma containing a component of remelted ancient crust. Zircon grains from the Eocene quartz diorite have ∊Hf( t) values ranging from −5.2 to +0.9 and two-stage Hf model ages ranging from 1.07 to 1.46 Ga, while zircon grains from the Miocene granitoid plutons have ∊Hf( t) values from −9.9 to +4.2 and two-stage Hf model ages ranging from 1.05−1.73 Ga, indicating that the ancient crustal component likely derives from Paleo- to Mesoproterozoic basement. This source is distinct from that of most porphyry Cu-Mo-Au deposits in the eastern part of the Gangdese porphyry copper belt, which likely originated from juvenile crust. We therefore consider melting of ancient crustal basement to have contributed significantly to the formation Miocene porphyry Cu-Mo-Au deposits in the western part of the Gangdese porphyry copper belt. [ABSTRACT FROM AUTHOR]

In this paper, 1:50 000 scale geological interpretation of remote sensing pictured compiled as the primary means, based on the understanding of geological data, based on the different characteristics remote sensing images, we interpreted geological boundary layer over the region and construct different types of remote sensing, Delineated ore-forming stratums and main mineralisation rocks from Caledonian period. At last, we summarised the mineralisation characteristics images and structures which associated with tungsten, copper, lead and zinc polymetallic of Yinsheng regional metallogenic belt. [ABSTRACT FROM AUTHOR]

The Sanshenjiang gold deposit in southeastern Guizhou Province, China, is hosted by the Neoproterozoic metasedimentary rocks which experienced low-grade greenschist facies metamorphism. Gold mineralization occurs mainly in the ribbon chiltern slate of the first member of the Longli Formation and is controlled by both strata and faults. Ore bodies are characterized by abundant quartz-arsenopyrite-gold-pyrite-bedding veins, veinlets and small lenses within the shear zone. In this study, trace element and REE geochemistry was analyzed to constrain the origin and genesis of this deposit. The trace element signatures of wall rocks and veins display a basically similar tendency in the spider diagram, showing the genetic relationship. The values of Co/Ni, Y/Ho, Hf/Sm, Nb/La and Th/La reflect that the hydrothermal fluids of this deposit were derived from the mixture of multiple sources with marked enrichment of Cl and moderate to high temperature. There is a broad similarity in the chondrite-normalized patterns and REE fractionation between wall rocks and ore bodies, possibly reflecting their similar origin. Based on the difference in δCe and δEu, quartz veins and lenses can be subdivided into weakly negative Ce-anomalies (δCe=0.81 to 1.06) with slight Eu anomalies (δEu=0.81 to 1.06) type and the significant positive Ce-anomalies (δCe=1.13 to 1.97) with moderate negative Eu-anomalies type, probably suggesting physical-chemical changes in the evolution process of ore-forming fluids from the early to late stage. It can be concluded that the ore-forming process may have experienced three stages: formation of the original ore source bed, regional metamorphism and gold mineralization, on the basis of trace element and REE analysis and field observation. [ABSTRACT FROM AUTHOR]

Granitic pegmatites are commonly thought to form by fractional crystallization or by liquid immiscibility of granitic magma; however, these proposals are based mainly on analyses of fluid and melt inclusions. Here, we use the Jiajika pegmatite deposit, the largest spodumene deposit in Asia, as a case study to investigate ore forming processes using isotope dating. Daring of a single granite sample from the Jiajika deposit using multiple methods gave a zircon U-Pb SHRIMP age of 208.4 ± 3.9 Ma, an 40Ar/39Ar age for muscovite of 182.9 ± 1.7 Ma, and an 40Ar/39Ar age for biotite of 169.9 ± 1.6 Ma. Based on these dating results and the 40Ar/39Ar age of muscovite from the Jiajika pegmatite, a temperature-time cooling track for the Jiajika granite was constructed using closure temperatures of the different isotope systems. This track indicates that the granite cooled over ∼40 m. y., with segregation of the pegmatite fluid from the granitic magma at a temperature of ∼700°C. This result suggests that the Jiajika pegmatite formed not by fractional crystallization, but by segregation of an immiscible liquid from the granitic magma. When compared with fractional crystallization, the relatively early timing of segregation of an immiscible liquid from a granitic magma can prevent the precipitation of ore-forming elements during crystallization, and suggests that liquid immiscibility could be an important ore-forming process for rare metal pegmatities. We also conclude that isotope dating is a method that can potentially be used to determine the dominant ore-forming processes that occurred during the formation of granite-related ore deposits, and suggest that this method can be employed to determine the formation history of the W-Sn ore deposits found elsewhere within the Nanling Metallogenic Belt. [ABSTRACT FROM AUTHOR]

The article reports on geological study of Pb-Zn deposits located in Narusonghuo, China. Topics discussed include several Pb-Zn mineralization formed by various physical processes chloritization, silicification and carbonation, found in the region, associated with quartz syenite porphyry, geochemical analysis on the same and role of Neo Tethys oceanic crust and wedge mantle in formation of Narusongduo porphyry magma, with characteristic chemical geology.

The article presents a study that highlights vein type and characteristic of Tiegelongnan copper-gold deposit in Duolong Ore District, Tibet. Topics include pyrite- quartz veins in which content of pyrites is about 25 percent, molybdenite- pyrite vein whose width is small, and pyrite- dickite vein whose width is about 11 centimeter (cm).

The article presents a study that highlights mineralogical and petrographic characteristics of the Mengyaa lead (Pb)- Zinc (Zn) deposit in Tibet. The study shows that magmatic rocks in the deposit comprise granite porphyry, quartz porphyry and diabase porphyrite. Also the study reveals several minerals in the deposit including gangue minerals such as quartz and calcite, primary ore minerals such as pyrite and galena, and secondary minerals such as anglesite and goethite.

The article discusses on tectonic setting and their metallogenic significance of the indium-rich deposits with a global perspective. It states that comparison of the global metallogenic period and orogeny revealed several metallogenic provinces of indium-rich that are closely related to oceanic, continental plate margin or orogenic belt, across the world. It also mentions that indium-rich deposits are mainly formed in late Ordovician, Carboniferous and Cretaceous period and Triassic period.