Search

Despite almost a century of studies dealing with traffic noise, researchers and practitioners still face old and new issues when designing a low-noise pavement. Given that, this manuscript aims at focusing on a number of unsolved questions, namely theoretical or technological. 1) Is it viable to balance diverse road-related needs (i.e., noise, expected life, texture levels, and friction)? 2) How much does the pavement material affect its acoustic performance (the remaining factors being constant)? 3) How much reliable is the relationship between road texture and mixture aggregate gradation? Based on the analysis of these issues, it emerges that: 1) optimal pavement design involves complex mix optimization and there are theoretical and practical bases to set up a balanced approach to address the complexity of pavement design; 2) high percentages of crumb rubber could optimise road acoustic response but this latter has a relationship with the tyre/road noise (expressed, for example, in terms of close proximity index) that calls for further investigation; 3) aggregate gradation appears to be a reliable basis to predict surface texture and therefore, under given boundary conditions, tyre/road noise; and 4) further studies and investigations are needed in terms of local calibration of deterioration curves and setting up of a sound method to assess the frequency response of asphalt concretes and to govern on-site noise indicators based on mixture properties.

Objective: This study aimed to evaluate the significance of background noise in machine learning models assessing the GRBAS scale for voice disorders., Methods: A dataset of 1406 voice samples was collected from retrospective data, and a 5-layer 1D convolutional neural network (CNN) model was constructed using TensorFlow. The dataset was divided into training, validation, and test data. Gaussian noise was added to test samples at various intensities to assess the model's noise resilience. The model's performance was evaluated using accuracy, F1 score, and quadratic weighted Cohen's kappa score., Results: The model's performance on the GRBAS scale generally declined with increasing noise intensities. For the G scale, accuracy dropped from 70.9% (original) to 8.5% (at the highest noise), F1 score from 69.2% to 1.3%, and Cohen's kappa from 0.679 to 0.0. Similar declines were observed for the remaining RBAS components., Conclusion: The model's performance was affected by background noise, with substantial decreases in evaluation metrics as noise levels intensified. Future research should explore noise-tolerant techniques, such as data augmentation, to improve the model's noise resilience in real-world settings., Level of Evidence: This study evaluates a machine learning model using a single dataset without comparative controls. Given its non-comparative design and specific focus, it aligns with Level 4 evidence (Case-series) under the 2011 OCEBM guidelines Laryngoscope, 134:3537-3541, 2024., (© 2024 The Authors. The Laryngoscope published by Wiley Periodicals LLC on behalf of The American Laryngological, Rhinological and Otological Society, Inc.)

Objectives: Understanding speech in noise (SIN) is the dominant complaint of individuals with hearing loss. For decades, the default test of speech perception in routine audiologic assessment has been monosyllabic word recognition in quiet (WRQ), which does not directly address patient concerns, leading some to advocate that measures of SIN should be integrated into routine practice. However, very little is known with regard to how SIN abilities are affected by different types of hearing loss. Here, we examine performance on clinical measures of WRQ and SIN in a large patient base consisting of a variety of hearing loss types, including conductive (CHL), mixed (MHL), and sensorineural (SNHL) losses., Design: In a retrospective study, we examined data from 5593 patients (51% female) who underwent audiometric assessment at the Stanford Ear Institute. All individuals completed pure-tone audiometry, and speech perception testing of monaural WRQ, and monaural QuickSIN. Patient ages ranged from 18 to 104 years (average = 57). The average age in years for the different classifications of hearing loss was 51.1 (NH), 48.5 (CHL), 64.2 (MHL), and 68.5 (SNHL), respectively. Generalized linear mixed-effect models and quartile regression were used to determine the relationship between hearing loss type and severity for the different speech-recognition outcome measures., Results: Patients with CHL had similar performance to patients with normal hearing on both WRQ and QuickSIN, regardless of the hearing loss severity. In patients with MHL or SNHL, WRQ scores remained largely excellent with increasing hearing loss until the loss was moderately severe or worse. In contrast, QuickSIN signal to noise ratio (SNR) losses showed an orderly systematic decrease as the degree of hearing loss became more severe. This effect scaled with the data, with threshold-QuickSIN relationships absent for CHL, and becoming increasingly stronger for MHL and strongest in patients with SNHL. However, the variability in these data suggests that only 57% of the variance in WRQ scores, and 50% of the variance in QuickSIN SNR losses, could be accounted for by the audiometric thresholds. Patients who would not be differentiated by WRQ scores are shown to be potentially differentiable by SIN scores., Conclusions: In this data set, conductive hearing loss had little effect on WRQ scores or QuickSIN SNR losses. However, for patients with MHL or SNHL, speech perception abilities decreased as the severity of the hearing loss increased. In these data, QuickSIN SNR losses showed deficits in performance with degrees of hearing loss that yielded largely excellent WRQ scores. However, the considerable variability in the data suggests that even after classifying patients according to their type of hearing loss, hearing thresholds only account for a portion of the variance in speech perception abilities, particularly in noise. These results are consistent with the idea that variables such as cochlear health and aging add explanatory power over audibility alone., Competing Interests: The authors have no conflicts of interest to disclose., (Copyright © 2024 The Authors. Ear & Hearing is published on behalf of the American Auditory Society, by Wolters Kluwer Health, Inc.)

Cellulose-based foams present a high potential for noise insulation applications. These materials are bio-degradable, eco-friendly by both embedded components and manufacturing process, have low density and high porosity, and are able to provide good noise insulation characteristics compared with available petroleum-based foams currently used on a large scale. This paper presents the results of some investigations performed by the authors in order to improve the functional characteristics in terms of free surface wettability and structural integrity. Native xylan and xylan-based derivatives (in terms of acetylated and hydrophobized xylan) were taken into account for surface treatment of cellulose foams, suggesting that hemicelluloses represent by-products of pulp and paper industry, and xylan polysaccharides are the most abundant hemicelluloses type. The investigations were mainly conducted in order to evaluate the level to which surface treatments have affected the noise insulation properties of basic cellulose foams. The results indicate that surface treatments with xylan derivatives have slowly affected the soundproofing characteristics of foams, but these clearly have to be taken into account because of their high decrease in wettability level and improving structural integrity. [ABSTRACT FROM AUTHOR]

In the evolving domain of High Dynamic Range (HDR) display metrology, the precise definition and systematic characterization of input signals is important. Using input signals that include both spatially and temporally complex image sequences is beneficial to reflect properties of real‐world content as well as to cover corner cases. One challenge with using this kind of content is to verify if it is indeed suitable for the intended purpose. This paper introduces an automated framework employing a set of statistical measures to define and characterize content, which then can serve as an important steppingstone towards programmatic image sequences and testing workflows. [ABSTRACT FROM AUTHOR]

Purpose: The Listen to Learn for Life (L3) Assessment Framework is a framework that outlines how to systematically assess the links between the classroom environment, listening, learning and well-being. The purpose of this paper is to review the published literature to understand what is known about the characterisation of activity component of the L3 Assessment Framework and determine what is not known and needs to be investigated in future research. Design/methodology/approach: Literature reviews (Web searches for systematic, scoping or general reviews; scoping reviews following the preferred reporting items for systematic reviews and meta-analyses extension for scoping reviews protocol; and extended Web searches) were conducted to characterise lecture, group work and independent work activities in terms of the perceptual setting, source degradation and transmission degradation. Findings: Most research that has been conducted is for classrooms in general and does not specify results specifically for lecture, group work and independent work, which is important for understanding how the learning environment changes with the different activities. What is known about the lecture, group work and independent work activities are discussed; however, it is noted that this often comes from only a few studies. Future research areas to contribute to this literature as well as fill current research gaps are proposed. Originality/value: To the best of the authors' knowledge, this paper is the first review paper to synthesize previous research characterising the classroom environment for different activities using the L3 Assessment Framework. It provides an analysis of the limitations of existing literature and proposes future research to help fill in these gaps. [ABSTRACT FROM AUTHOR]

In the field of deep matching, a large amount of noisy data in Chinese long texts affects the matching effect. Most long-form text matching models use all text data indiscriminately, which results in a large amount of noisy data, and thus the PageRank algorithm is combined with Transformer to filter noise. For sentence-level noise detection, after calculating the overlap rate of words to evaluate the similarity, a sentence-level relationship graph is constructed and filtered by using the PageRank algorithm; for word-level noise detection, based on the attention score in Transformer, a word graph is established, then the PageRank algorithm is executed on graph, combined with self-attention weights, to select keywords to highlight topic relevance, the noisy words are filtered sequentially at different layers in the module, layer by layer. In addition, during the model training, PolyLoss is applied to replace the traditional binary Cross-Entropy loss function, thus reducing the difficulty of hyperparameter tuning. Finally, a better filtering strategy is proposed and experiments are conducted to verify it on two Chinese long-form text matching datasets. The result shows that the matching model based on the noise filtering strategy of this paper can better filter the noise and capture the matching signal more accurately. [ABSTRACT FROM AUTHOR]

Reorganization of neonatal intensive care by introducing clinical microsystems may help to allocate nursing time more appropriately to the needs of patients. However, there is concern that cohorting infants according to acuity may enhance noise levels. This single-center study investigated the impact of reorganization of neonatal intensive care unit by implementing clinical microsystems in a Level III NICU on environmental noise. This prospective study measured 24-h noise levels over a period of 6 months during pre- and post-implementation of microsystems cohorting infants of similar acuity. Comparative analyses of the mixed acuity (i.e., before) and the cohorting (i.e., after) model were performed by creating daily profiles from continuous noise level measurements and calculating the length of exposure to predefined noise levels. Compared to baseline daytime measurements, noise levels were 3-6 dBA higher during physician handover. Noise levels were 2-3 dBA lower on weekends and 3-4 dBA lower at night, independent of the organizational model. The introduction of clinical microsystems slightly increased average noise levels for high-acuity pods (A and B) but produced a much more substantial decrease for low-acuity pods (E), leading to an overall reduction in unit-wide noise levels.    Conclusion: Our data show that noise levels are more driven by human behavior than by technical devices. Implementation of microsystems may help to reduce noise exposure in the lower acuity pods in a NICU. What is Known: • Excessive noise levels can lead to adverse effects on the health and development of premature infants and other critically ill newborns. • The reorganization of the neonatal intensive care unit following the clinical microsystems principles might improve quality of care but also affect noise exposure of staff and patients. What is New: • The transition from a mixed -acuity to cohorting model is associated with an overall reduction in noise levels, particularly in low-acuity pods requiring less nursing care. • Nevertheless, baseline noise levels in both models exceeded the standard permissible limits., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Noise exposure has reached an alarming degree over the years because of rapid growth in the industry, transportation, and urbanization. Therefore, it is a dire need to provide awareness of the sources and mitigation strategies of noise, and to highlight the health, and socio-economic impacts of noise. A few research studies have documented this emerging issue; however, there is no comprehensive document describing all types of noise, their impacts on living organisms, and control strategies. This review article summarizes the sources of noise; their effects on industrial workers, citizens, and animals; and the value of property in noisy areas. The plethora of literature is showing an increased level of noise in various cities of the world, which have various health consequences such as high blood pressure, insomnia, nausea, heart attack, exhaustion, dizziness, headache, and triggered hearing loss. Apart from humans, noise also affects animal habitat, preying, and reproduction ability; increases heart rate and hearing loss to even death and loss in property value; and impairs the hospital environment. Finally, we have discussed the possible strategies to mitigate the noise problem, policy statements, and regulations to be followed, with future research directions based on the identified research gaps., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In most of the following references, the author's name is followed by the title of the paper or book in boldface, the journal, the volume number in boldface, the issue number in parentheses, the page reference, and lastly, in parentheses, the year. Where reference is made to abstract journals that number their abstracts, the abstract number is given instead of a page reference. Abstracts in Annales des Tèlècommunications are in French and those for Referativnyi Zhurnal, Fizika (three series, E, I, Zh) are in Russian [where, e.g., Ref. Zh. Fiz. 7 E425 (1979) means: July issue, E, abstract no. 425, year 1979.] When possible, the abbreviations for the names of the journals follow those in Bibliographic Guide for Editors & Authors (1974). A number preceded by the letters AD, DE, PB, or N refers to the accession/report number of the Government Reports Announcements & Index. The numbers to the left of the sections and sub-sections in this volume correspond to those that appear in the Classification of Subjects preceding the index in the June 1983 issue of JASA. Compiled from various sources. For many of the journals referred to here, those interested will find their addresses in either the semi-annual Author Index of Physics Abstracts or the annual Physics Briefs: List of Abstracted Periodical and Serial Publications.

The soundscape study of an eastern Indian coastal city (Puri) has been investigated. Acoustic data were collected at 36 sampling locations during two time intervals in and around Puri. A number of noise indices, namely, Lmin, Lmax, and Leq, were calculated to demonstrate the noise level of this city. Noise maps are generated using ARC-GIS to investigate the impact of road traffic noise on the soundscape of the city. The response of the public was appraised by a questionnaire. Due to variable traffic features, the equivalent noise level (Leq) as well as peak (L 10 ) and background noise (L 90 ) levels varied with location and time of the day. It was found that socio-demographic characteristics have no bearing on the amount of annoyance. However, a link was observed between age, hearing condition, and noise perception, as well as between gender and impacts of noise., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Noise is an unpleasant and unwanted sound for every human and animal. Noise can also interfere with one's communication and concentration. Nowadays, many sound absorber panels have been produced to overcome arising noise issues. A sound absorber panel works to absorb sound either in low or high frequencies. Usually, in Malaysia, synthetic materials are used for producing sound absorber panels. Glass fibre and minerals are the most common examples of synthetic materials used to produce sound absorber panels. In particular, glass fibre has a good result in sound absorption. However, it also brings negative effects to humans' health, such as skin inflammation, redness, cough, breathlessness, and others. Therefore, for this study, natural materials from recycling have been used to produce sound absorber panels, which are egg trays, papers, and plastics. The panels were tested with the impedance tube test to obtain the sound absorption coefficient (SAC) and the noise reduction coefficient (NRC). The values of sound absorption of plastics and papers are good at the frequency of 2,000 Hz (i.e., 0.75 and 0.74, respectively). However, the value of SAC for papers increased to 0.86, compared to the value of SAC for plastics that decreased to 0.67. Furthermore, the value of NRC for papers is better than plastics. Next, the reverberation room test was also performed on the panels to obtain the echo time value (RT) in the current unit. The comparison of echo time for this test is between the values for a room with and without panels. The results from the test showed that the value of echo time for the room with the panels is better than the room without panels. [ABSTRACT FROM AUTHOR]

With the advancement of IoT(Internet of Things), image processing is being studied in various fields. Salt and pepper(S&P) noise in image acquisition devices, such as CT(Computed Tomography), MRI(Magnetic Resonance Imaging), X-ray, and scanning equipment, may develop due to environmental and physical factors, thereby distorting the original image. Numerous studies have been conducted to remove S&P noise, but existing filters have shown significantly insufficient restoration of high-density noise, low-light, and patterned images. Therefore, this paper proposes a filter high-density and low-light noise environments and preserve the patterns properties appearing in the images. In the proposed algorithm, we design local masks transformed for high-density noise and low-light images and defined the patterns represented in the images by determining and grouping similar pixels. Different filters are applied according to the pattern of similar pixel group to preserve the geometry based on its position in the input image. [ABSTRACT FROM AUTHOR]

This field study aimed to evaluate the prevalence of annoyance and disturbance and the subjective perception of the sound environment due to noise, in an old and a new control room at a large paper mill. Working in a control room requires sustained attention and concentration and, in the case of error messages, rapid and correct decisions. In this study, the personnel's responses were collected by questionnaire, and detailed sound measurements were taken in both control rooms. The A-weighted sound pressure level in the new control room was 54.9 dB, a reduction from the 63.5 dB measured in the old room, and the C-weighted sound pressure level was 66.8 dB, a reduction from the 75.2 dB measured in the old room. The new control room was rated as being a less noisy environment; however, the personnel did complain about noise from other computers/equipment, radios, and the new laboratory. [ABSTRACT FROM AUTHOR]

Application of the nonlinear Kalman filtering method to logarithmically amplified low-coherence fringe signals measured from paper samples is considered. Experimental results of dynamic fringe envelope recovery in optical coherence tomography (OCT) systems are presented. The analog fringe envelope and digital dynamic fringe envelope recoveries from noisy signals are compared. The results show that the nonlinear discrete Kalman filtering method can be applied to estimate envelopes of logarithmically transformed low-coherence fringe signals with high noise immunity. Logarithmic amplification reduces quantization error in dealing with small signal values. The experimental results obtained demonstrate the possibility of purely digital signal processing in OCT. [ABSTRACT FROM AUTHOR]

: We analyze 6500 mm long fracture lines of paper as an example of crack propagation involving disorder. The cracks are asymptotically self-affine, with a roughness exponent close to 0.6. Systematic deviations from the power-law-scaling exist below a lengthscale related to the microscopic heterogeneities and possibly to a cross-over from 3d to 2d crack propagation. Several analysis methods are discussed, including first return analysis and the detection of correlated trends. [ABSTRACT FROM AUTHOR]

Sound is omnipresent in the underwater environment and can be produced by natural (waves, weather, animals) and man-made (shipping, wind farms, oil and gas activities) sources. For marine animals, such as whales, fish and even invertebrates, the auditory senses are very important. To evaluate the soundscape and to manage the marine environment with respect to underwater noise monitoring is very important. For management the impact of noise some options are available. These options need further consideration to be implemented effectively. • This paper describes results of the JOMOPANS project and discusses possible actions to manage the impact of underwater noise. [ABSTRACT FROM AUTHOR]

We propose deep learning‐enhanced self‐interference incoherent digital holography. Self‐interference incoherent digital holography is a hologram acquisition technique under the incoherent light condition, which can capture the real‐world complex hologram. To overcome unwanted optical defects of the self‐interference, we suggest a data‐driven approach for reducing the additional noise and enhancing the image quality. [ABSTRACT FROM AUTHOR]

1/f noise represents the dominant source of noise in the low‐frequency range in several physical systems, including field‐effect transistors. Its investigation can provide very important information on the fabrication process, highlighting the steps that are more prone to the introduction of defects. Here, 1/f noise in bilayer MoS2 transistors on paper with inkjet‐printed Ag contacts and hBN dielectric is investigated. These devices are promising building blocks for future low‐cost, flexible, and easily recyclable disposable electronics. The analysis of 1/f noise, performed following Hooge's empirical approach, results in a Hooge parameter ≈1–10, which is comparable to those reported for bilayer MoS2 transistors on SiO2. The present results indicate that the noise properties of the investigated devices are stable against substrate bending and are mainly determined by the printing of the dielectric, while not being sensibly affected by the use of the paper substrate. These results are promising for the further development of low noise 2D material‐based flexible electronics on paper. [ABSTRACT FROM AUTHOR]

The Perona-Malik (P-M) model exhibits deficiencies such as noise amplification, new noise introduction, and significant gradient effects when processing noisy images. To address these issues, this paper proposes an image-denoising algorithm, ACE-GPM, which integrates an Automatic Color Equalization (ACE) algorithm with a gradient-adjusted P-M model. Initially, the ACE algorithm is employed to enhance the contrast of low-light images obscured by fog and noise. Subsequently, the Otsu method, a technique to find the optimal threshold based on between-class variance, is applied for precise segmentation, enabling more accurate identification of different regions within the image. After that, distinct gradients enhance the image's foreground and background via an enhancement function that accentuates edge and detailed information. The denoising process is finalized by applying the gradient P-M model, employing a gradient descent approach to further emphasize image edges and details. Experimental evidence indicates that the proposed ACE-GPM algorithm not only elevates image contrast and eliminates noise more effectively than other denoising methods but also preserves image details and texture information, evidenced by an average increase of 0.42 in the information entropy value. Moreover, the proposed solution achieves these outcomes with reduced computational resource expenditures while maintaining high image quality. [ABSTRACT FROM AUTHOR]

Purpose: The aim was to study mortality due to cardiovascular disease as well as total mortality, among female industrial workers, and the association to occupational noise and shift work. Methods: Women from cohorts of soft tissue paper mills (N = 3013) and pulp and paper mills (N = 1483) were merged into one cohort. Job exposure matrices were developed and used for classification of shift work and noise exposure. Every year was classified as shift work excluding nights or shift work including nights. Noise was classified into seven 5 dB(A) bins from < 75 to ≥ 100 dB(A). Mortality from cardiovascular diseases and total mortality during 1956–2013 was calculated as a standardized mortality ratio (SMR) with 95% confidence interval (CI) using the female general population as a reference. Results: Fatal myocardial infarctions (N = 144) were increased in the total cohort, SMR 1.20 (95% CI 1.01–1.41) but not total mortality. The SMR for myocardial infarction for women exposed to noise ≥ 90 dB(A) for > 10 years was 1.41 (95% CI 1.02–1.89) and for those exposed to night shifts > 10 years, 1.33 (95% CI 0.91–1.89). Shift workers without nights ≤ 65 years, with noise exposure ≥ 90 dB(A), had SMR 2.41 (95% CI 1.20–4.31) from myocardial infarction. There was no increased mortality from cerebrovascular disease. Conclusions: Female paper mill workers had an increased mortality from acute myocardial infarction, especially before retirement age, when exposed to noise ≥ 90 dB(A) and with long-time employment. Exposure to shift work and noise usually occurred concurrently. [ABSTRACT FROM AUTHOR]

The paper proposes a smart method to remove network nodes that are highly prone to impulse noise and replacing them with a linear combination of existing more reliable nodes. This is done to reduce communication cost. To reduce the communication cost in a network, a common way is to remove some nodes randomly and then replace the intermediate estimation of these nodes by the corresponding node estimation. In this direction, the contribution of this paper is twofold. First, we suggest to remove the nodes smartly by omitting the unreliable nodes prone to impulsive noise. This is done by computing the disturbance induced in the adaptation step of the diffusion least mean square. Second, we replace the estimation of removing nodes by a linear combination of existing estimations of reliable nodes instead of just replacing by the estimation of the corresponding node. Also, the coefficients of linear combination are optimized based on the minimum disturbance principle. Furthermore, the minimum achievable disturbance is calculated mathematically and a necessary and sufficient condition for stability of the proposed algorithm is presented. Finally, the simulation results show the efficiency of the proposed method in comparison with some state-of-the-art algorithms. [ABSTRACT FROM AUTHOR]

A generalization of the problem of writing on dirty paper is considered in which one transmitter sends a common message to multiple receivers. Each receiver experiences on its link an additive interference (in addition to the additive noise), which is known noncausally to the transmitter but not to any of the receivers. Applications range from wireless multiple-antenna multicasting to robust dirty paper coding. We develop results for memoryless channels in Gaussian and binary special cases. In most cases, we observe that the availability of side information at the transmitter increases capacity relative to systems without such side information, and that the lack of side information at the receivers decreases capacity relative to systems with such side information. For the noiseless binary case, we establish the capacity when there are two receivers. When there are many receivers, we show that the transmitter side information provides a vanishingly small benefit. When the interference is large and independent across the users, we show that time sharing is optimal. For the Gaussian case, we present a coding scheme and establish its optimality in the high signal-to-interference-plus-noise limit when there are two receivers. When the interference power is large and independent across all the receivers, we show that time-sharing is again optimal. Connections to the problem of robust dirty paper coding are also discussed. [ABSTRACT FROM AUTHOR]

Background: Noise exposures are associated with a host of adverse health effects, yet these exposures remain inadequately characterized in many industrial operations, including paper mills. We assessed noise at four paper mills using three measures: (i) personal noise dosimetry, (ii) area noise measurements, and (iii) questionnaire items addressing several different aspects of perceived noise exposure. Methods: We assessed exposures to noise characterized using the three measures and compared the relationships between them. We also estimated the validity of each of the three measures using a novel application of the Method of Triads, which does not appear to have been used previously in the occupational health literature. Results: We collected 209 valid dosimetry measurements and collected perceived noise exposure survey items from 170 workers, along with 100 area measurements. We identified exposures in excess of 85 dBA at all mills. The dosimetry and area noise measurements assigned to individual subjects generally showed good agreement, but for some operations within mill, large differences between the two measures were observed, and a substantial fraction of paired measures differed by >5 dB. Perceived noise exposures varied greatly between the mills, particularly for an item related to difficulty speaking in noise. One perceived noise exposure item related to difficulty hearing due to noise showed strong and significant correlations with both dosimetry and area measurements. The Method of Triads analysis showed that dosimetry measures had the highest estimated validity coefficient (0.70), and that the best performing perceived exposure measure had validity that exceeded that of area measurements (0.48 versus 0.40, respectively). Conclusions: Workers in Swedish pulp mills have the potential for exposures to high levels of noise. Our results suggest that, while dosimetry remains the preferred approach to exposure assessment, perceived noise exposures can be used to evaluate potential exposures to noise in epidemiological studies. [ABSTRACT FROM AUTHOR]

The author discusses papers on synthetic data published in the previous issue of the journal. Topics covered include the common themes identified in the papers which deal with synthetic data according to the definition commonly used in the statistical disclosure control community, a different approach for data protection based on noise infusion discussed in one synthetic data paper, and a discussion on data dissemination.

To correlate headng impairment and simultaneous occupational exposure to noise and organic solvents, it was made a cross-sectional research in 140 workers from a paper factory's with more than five years in same factory job. Workers were distributed in three groups as follows: unexposed (n=43), exposed to noise (n=50) and exposed to noise and organic solvents (n=47). Medical examination included audiometry to look for hearing impairment. The risk of hypoacusia was greater in exposed workers than in unexposed ones. Exposure to noise longer than five years was related to Odds Ratio (OR)=11,85 (1,46-66.57) and a hearing impairment prevalence of 22%. Simultaneous occupational exposure to noise and solvents produced OR=14.4 (1.78-77.3) and 25.53% hypoacusia prevalence. For men exposed to noise and solvents, the risk of hearing impairment was 1,22 times greater than for workers exposed to noise only [OR=1.22 (0.43-3.43)]. It was determined that workers simultaneously exposed to noise and solvents had not a greater risk to suffer hearing impairment than those exposed only to noise. [ABSTRACT FROM AUTHOR]

A full‐panel circuit model of the on‐cell touch AMOLED is introduced to simulate the mutual interference between touch and display operations. The proposed panel model successfully reproduced nonlinear behaviors of the display noise observed in real systems. Also, the reverse‐directional interference, i.e., touch‐to‐display coupling, was simulated, showing that touch stimulation incurs the fluctuation of display charging voltages, possibly causing perceivable line defects. The proposed panel model can be used for various touch/display algorithms to reduce the interference effects and to determine key design parameters for new panels. [ABSTRACT FROM AUTHOR]

Elevated noise level is an emerging global problem. Therefore, the present work is conducted that can improve, increase, and integrate the already known issue in literature with new information coming from an emerging country such as Pakistan. The objectives of this study were (i) to assess the urban noise levels and traffic density of Chiniot and Jhang and (ii) to determine nonauditory health effects of noise levels on the residents of both cities. Noise levels were examined from 181 locations (103 from Jhang and 78 from Chiniot) and categorized into hospitals, educational, religious and recreational, residential, industrial areas, and traffic intersections. A-weighted noise level measurements were taken using an integrated sound level meter which recorded short-term road traffic noise continuously for 15 min at each location (LA eq15 ). The urban noise data showed 82% of the sites in Jhang (LA max = 103 dB) and 95% in Chiniot (LA max = 120 dB) exceeded the noise limits set by the National Environment Quality Standard of Pakistan (NEQS-Pak) and World Health Organization (WHO). Moreover, higher intensity of noise levels (LA eq15 ≥ 100 dB) was recorded in Chiniot (17 sites) than in Jhang (1 site). Regression analysis showed a relatively strong relationship of traffic density with noise at Chiniot (R 2 = 0.48) compared to Jhang (R 2 = 0.31). However, spatial variability of noise with traffic density was observed in both cities. Survey study revealed that all the respondents in Jhang and Chiniot suffered from many noise-related health problems such as annoyance (53 and 51%), depression (45 and 47%), dizziness (61 and 65%), headache (67 and 64%), hypertension (71 and 56%), hearing loss (53 and 56%), physiological stress (65 and 65%), sleeplessness (81 and 84%), and tinnitus (70 and 62%) due to noise, respectively. We conclude that noise levels are higher in Chiniot primarily due to high road traffic and secondarily due to high population density. It is recommended that vehicle maintenance and family and urban planning could be effective measures to reduce urban noise levels., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Costa's celebrated "writing on dirty paper" (WDP) shows that the power-constrained channel Y = X + S + Z, with Gaussian Z, has the same capacity as the standard AWGN channel Y = X + Z, provided that the "interference" S (no matter how strong it is) is known at the transmitter. While this ability for perfect interference cancelation is very appealing, it relies heavily on the Gaussianity of the (unknown) noise Z. We construct an example of "bad" noise for writing on dirty paper, namely, "difference set noise". If the interference S is strong, then difference-set noise limits the WDP capacity to at most 2 bits. At the same time, like in the AWGN case, the zero-interference capacity grows without bound with the input constraint. Thus almost 100% of the available capacity is lost in WDP in the presence of difference-set noise. This high capacity loss is due to the "entropy amplification property" (EAP) of noise with an aperiodic probability distribution. Using the EAP and the duality between WDP and Wyner--Ziv source coding, we also give an example of dramatic rate-loss in quantizing encrypted source. [ABSTRACT FROM AUTHOR]

We compare the capacity of dirty-paper coding (DPC) to that of time-division multiple access (TDMA) for a multiple-antenna (multiple- input multiple-output (MIMO)) Gaussian broadcast channel (BC). We find that the sum-rate capacity (achievable using DPC) of the multiple-antenna BC Is at most min(M, K) times the largest single-user capacity (i.e., the TDMA sum-rate) in the system, where M is the number of transmit antennas and K is the number of receivers. This result is Independent of the number of receive antennas and the channel gain matrix, and is valid at all signal-to-noise ratios (SNRs). We investigate the tightness of this bound In a time-varying channel (assuming perfect channel knowledge at receivers and transmitters) where the channel experiences uncorrelated Rayleigh fading and In some situations we find that the dirty paper gain is upper-bounded by the ratio of transmit-to-receive antennas. We also show that min(M, K) upper-bounds the sum-rate gain of successive decoding over TDMA for the uplink channel, where M is the number of receive antennas at the base station and K is the number of transmitters. [ABSTRACT FROM AUTHOR]