Search

Numerical modeling was used in order to study the effect of tidal currents within a breakwater scheme that has reached morphodynamic equilibrium. Tidal flow is simulated, using a downscaling procedure from a regional numerical model, in order to investigate the small-scale hydrodynamic modifications caused by the structures in the absence of waves. Sediment transport processes at different stages of the neap and spring tidal cycle are also considered over the entire scheme. Significant modifications to the tidal currents were identified, caused by the presence of the following structures: (1) obstruction of the main tidal flow and (2) flow channelization between the structures and the coastline, leading to flow acceleration over the salients. Furthermore, the effect of the modified tidal regime on bedload sediment transport processes was investigated. The design characteristics of the scheme (i.e., gap width, offshore distance, and relative angle with respect to the tidal currents) are found to influence locally the tidal flow and the bedload transport, over the top of the salients, modulating their growth. Despite being located in a mixed-energy, wave-dominated environment, the shear stress ratio between currents and waves show a dominance of tidal processes at the sheltered areas of the scheme (i.e., behind the breakwaters) that diminishes as the incident wave period increases. Hence, in order to correctly predict the morphological evolution of such coast under the influence of coastal protection schemes, the tidal processes have to be studied in addition to the wave processes. [ABSTRACT FROM AUTHOR]

The development of tidal energy in Australia is still a challenge with few studies performed on the characterisation of the resource, due to the difficulty to acquire data and uncertainties about the influence of this anthropogenic activity on the marine environment. Changes in flow could lead to alterations in sediment transport and have further influence on the marine habitat. A case study in a promising area, Banks Strait (Australia), was created using high resolution 2D and 3D models validated against in situ data to investigate changes to hydrodynamic conditions with two scenarios of tidal farms (100 and 300 turbines). Comparison between 2D and 3D is performed to find the best compromise between model accuracy and computational time for preliminary assessment. Changes to current speed and bed shear stress over a 35 day period were found to be localised around the tidal farms and did not extent more than 7 km from the farm (300 turbines) for both 2D and 3D. The results showed that for near field and far field, 2D models are sufficient to give a first approximation of the hydrodynamic influence of tidal farm deployment on its environment. [ABSTRACT FROM AUTHOR]