Search

Nowadays, the emphasis is on increasing the durability of all products. For this reason, it is also advisable to look into extending the durability of paper products. The main reason for using flax pulp is that flax and cotton pulp are widely used for the production of banknotes due to their higher strength. This paper deals with flax pulp with the addition of nanocellulose, which should further enhance the mechanical properties of the pulp. The tensile strength, breaking length, and tensile energy absorption index were evaluated as the key mechanical properties. At the same time, the effect of the addition of nanocellulose, whether it was added to the pulp mass or applied to the later produced paper as a spray or coating, was tested in comparison to paper without the addition of nanocellulose. The best mechanical properties, i.e., tensile strength, were achieved for the highest addition of 5% of nanocellulose into the pulp, at 24.3 Nm∙g−1, and for the coating application, at 28.7 Nm∙g−1, compared to the flax pulp without the addition, where the tensile strength was 20.5 Nm∙g−1. The results of this research are used for the assessment of nanocellulose as a natural compatible additive to enhance the strength properties of cellulose-based materials. [ABSTRACT FROM AUTHOR]

Paper is one of the most important materials for packaging and the demand for this material is constantly increasing. The printing and packaging industries are researching alternative sources of fibre, to produce more environmentally friendly paper without compromising quality. As a packaging material, paper must meet high strength requirements, and it has to exhibit acceptable surface properties to preserve the printing quality. This research had two objectives: to produce paper made from pulp of recycled fibre reinforced with virgin straw fibre and to evaluate the print quality on such papers. Straw pulp used for this purpose was obtained from three cereal crops: wheat, barley, and triticale. The paper produced was printed by using five printing techniques. Rubbing stability was evaluated by the difference in colour and reflectance spectra before and after performing rub tests and a comparison was made for the best interaction of paper and ink determined by the printing technique. For the prints with the highest colour difference after the rub test, the surface of the rub test receptor (uncoated recycled paper) was examined for signs of ink transfer during the test and the areas of transferred ink coverage were calculated on their processed microscopic images.

In order to determine the influence of bast fibers isolated from Wikstroemia bark on the durability of paper, self-made paper was prepared using bagasse pulp mixed with Wikstroemia bark pulp using Kaihua paper manufacturing technology. The durability properties of the paper obtained with different proportions of Wikstroemia bark pulp were measured and analyzed. The results showed that Wikstroemia bark can lower the acidity, improve the mechanical strength, and delay the aging of paper. The mechanical strength showed an exponential relationship with the amount of Wikstroemia bark pulp added to the paper pulp. There was a linear positive correlation between the initial polymerization degree of the paper and the amount of Wikstroemia bark pulp, while the molecular fracture rate of the paper with Wikstroemia bark pulp was considerably reduced. Wikstroemia bark fibers are long fibers with high strength. At the same time, Wikstroemia bark fibers differ greatly in length, so the uniformity can meet the requirements. The durability of the paper made from only bagasse pulp was poor, but the overall strength and polymerization degree of the paper improve after being mixed with Wikstroemia bark pulp.

Paper recycling is a viable option for wastepaper management. This study assessed the suitability of recycled papers as a food packaging material. Permanence and durability of three different recycled papers; R1:150 GSM, R2:120 GSM, and R3:100 GSM with aging were evaluated using standard methods. Eventhough opacity increased with aging grammage, burst strength, tensile strength, pH, brightness, and whiteness decreased. Recycled papers failed water absorptiveness test even before aging. Presence of heavy metals in recycled papers were compared with food packaging standards and migration of heavy metals from the packaging to different food types was assessed. Presence of Cu, Zn, Mn, Cr, Cd and Pb were below EC and EPA standards but only Pb and Cd exceeded the EU standard. Migration of Cu, Zn, Mn and Cr were within EPA, EU and EC standards except Pb and Cd with respect to EC standard. Highest migration is associated with foods contain more fatty acids; fast food, sausages and pizza.

The environmental aspects of sustainable development in the construction industry involve the utilisation of secondary raw materials in the design and construction of new structures. This study aims to conduct a critical review of previous literature on the use of olive waste ash (OWA). The use of OWA in concrete helps create and maintain sustainable and greener development. Published literature has confirmed the huge potential of using olive biomass ash (OBA) as replacement for a small portion of natural fine aggregate as admixture or reinforcement. The main goal of this development is to reduce carbon dioxide emissions, which cause environmental pollution and climate problems, and support the reuse and exploitation of the waste concept. This study also aims to examine the effect of OBA on concrete properties, such as workability, setting times, soundness, compressive strength, flexural strength, shrinkage and durability, as well as its impact on sustainability. Furthermore, information regarding microstructure in terms of scanning electron microscopy is provided in this work. This study is considered the first review paper to investigate the utilisation of olive-stone biomass ash on construction materials. It also contains recommendations and observations for future research in this field. This study is important for international research as it provides a comprehensive overview of the potential of using OWA as a sustainable alternative in the construction industry and can inform future developments in this area.

Starch paste is an adhesive that is used in the field of book and paper conservation. This adhesive has a very short shelf life, and for this reason, it must be prepared in small quantities. Also, preparing starch paste for use in protection is a time-consuming process. This research was done with the aim of facilitating the use of starch paste in the conservation of paper works, long-term storage of starch pastes without fungicidal additives and increasing its durability in the long term without changing the quality of the adhesive. The application of fresh starch pastes and activated starch film increased the pH of the samples coated by these adhesives compared to the control samples without adhesive. The samples covered by the activated starch film after moist-heat aging and light aging had the highest pH compared to other samples. The samples coated with fresh starch paste showed the lowest amount of color changes (ΔE*) after moist-heat aging and light aging, respectively. Application of fresh starch paste and activated starch film increased the tensile strength of the samples. After aging, the tensile strength of the samples decreased compared to the previous stage, but the tensile strength of the samples covered by these adhesives increased compared to the control samples without adhesives. The adhesion of the samples decreased after aging. The samples coated with fresh starch paste had the highest adhesion after light aging. Also, after moist-heat aging, the samples covered by the activated starch film had the highest amount of adhesion. [ABSTRACT FROM AUTHOR]

Copyright of Annals of Warsaw University of Life Sciences - SGGW, Forestry & Wood Technology is the property of Wydawnictwo SGGW and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In order to determine the influence of bast fibers isolated from Wikstroemia bark on the durability of paper, self-made paper was prepared using bagasse pulp mixed with Wikstroemia bark pulp using Kaihua paper manufacturing technology. The durability properties of the paper obtained with different proportions of Wikstroemia bark pulp were measured and analyzed. The results showed that Wikstroemia bark can lower the acidity, improve the mechanical strength, and delay the aging of paper. The mechanical strength showed an exponential relationship with the amount of Wikstroemia bark pulp added to the paper pulp. There was a linear positive correlation between the initial polymerization degree of the paper and the amount of Wikstroemia bark pulp, while the molecular fracture rate of the paper with Wikstroemia bark pulp was considerably reduced. Wikstroemia bark fibers are long fibers with high strength. At the same time, Wikstroemia bark fibers differ greatly in length, so the uniformity can meet the requirements. The durability of the paper made from only bagasse pulp was poor, but the overall strength and polymerization degree of the paper improve after being mixed with Wikstroemia bark pulp. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

To study the life expectancy and difference in aging resistance properties of different modern repair bamboo papers, hydrothermal/dry-heat ageing experiments on repair bamboo paper samples were conducted. The mechanical strength (tensile strength and folding endurance) of different papers during the ageing process were analyzed. Furthermore, the chemical properties (degree of polymerization and pH) of the samples were tested to search for the immanent cause of paper ageing. The results indicated that the ageing resistance ability and durability of modern repair paper are strongly related to their production process, which corresponds with the initial properties of the paper. Mechanical pulp had a low degradation resistance, which was further exacerbated by the chemical bleaching process. In the long run, traditional handmade papers with solar bleaching processes will have longer-term stability and durability. [ABSTRACT FROM AUTHOR]

• The definition and measurement indicators of Citation Discontinuance (CD) are introduced. • The feasibility of utilizing CD to represent the durability of citation diffusion. • Influence of interdisciplinarity of scientific papers on the durability of citation diffusion, varying by discipline. Whether interdisciplinarity leads to greater success in research remains a question that is still unresolved. Investigating the impact of interdisciplinarity of scientific papers on the durability of their citation diffusion is of significant importance. Combining the concept of discontinuance in the theory of innovation diffusion and citation trajectory scenarios, this study proposes the definition and measurement indicators of Citation Discontinuance (CD), and examines the feasibility of using CD as a descriptor for the durability of citation diffusion. Using CD-related features as the dependent variable, hierarchical multiple regression is employed to explore the influence of interdisciplinarity of scientific papers on the durability of citation diffusion. The findings reveal that CD is commonly observed in citation diffusion and can serve as an indicator for describing the durability of citation diffusion. From the perspective of CD, the interdisciplinarity of scientific papers shows a positive impact on the durability of citation diffusion. This effect will also vary by discipline. [ABSTRACT FROM AUTHOR]

Labels are a crucial component of products, offering informational content and attractive visuals; therefore, the durability of the print is an important quality requirement. On the other hand, in accordance with eco-design, the recyclability of printed labels is vital. In our research, the focus was on the assessment of the durability, recyclability, and deinkability of printed label paper equipped with printed RFID tags. The determined color fastness of electrophotographic prints affected by various environmental factors showed good resistance to dry rubbing and, in most cases, light and moist–heat treatment, confirming the applicability of digital printing on self-adhesive biodegradable paper labels. In the second part of this study, recyclability was assessed, and a comparison between the deinkability of the offset and digital prints and two conductive functional inks was conducted. Good deinkability was observed for the printed RFID antennas on both the offset and electrographic prints, with only a small deterioration in optical properties, especially when nano-silver conductive ink was used. The study highlights the importance of the selection of materials and printing techniques when considering the environmental impact of printed electronics. The results showed that INGEDE 11 is a suitable deinking method for printed RFID antennas on offset and electrographic prints. [ABSTRACT FROM AUTHOR]

Industrial waste generated in the domestic paper industry in Japan was 5.1 million tons in 2015, and after reduction and recycling, 152 thousand tons of the waste was consequently disposed. Organic sludge (paper sludge), which occupies two-thirds of the industrial waste generated in the paper industry, is incinerated for the purpose of volume reduction and thermal recycling, and then it becomes paper sludge ash (PS ash). PS ash is recycled as aggregate, roadbed material in the civil engineering field and cement raw material, but it is necessary to further expand the application and reduce the final disposal amount. From the above background, in this research, the strength characteristics, the durability performance and the environmental impact of low carbon concrete produced by reducing cement usage to 45% by using PS ash as admixture in addition to fly ash and blast furnace slag fine powder, were investigated. Experimental results show that the low carbon concrete produced in this research has long term strength development, and that PS ash does not contribute to long term strength. Moreover, the clay mineral contained in the PS ash has an effect of reducing drying shrinkage by water retention and expansion. With respect to durability performance, neutralization is promoted by decreasing the total cement amount, while salt tolerance resistance is improved. Frost damage resistance tends to decrease. The elution amount of toxic substances is less than the soil environmental standard value.

A superhydrophobic paper with excellent robustness was fabricated by roll coating with modified nano-TiO2. First, nano-TiO2 particles were hydrophobically modified by γ-aminopropyltriethoxysilane and 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (POTS). Then the paper coating composed of modified nano-TiO2 particles as pigments and epoxy resin (EP) as adhesives was coated on a paper surface to create the desired surface morphology and surface energy. Compared with the uncoated filter paper, the prepared paper showed an improved rough surface morphology owing to the uniform layer of TiO2 microclusters deposited on the fiber network. The superhydrophobic paper exhibited water contact angles (WCA) about 153° ± 1.5°, and water sliding angles (WSA) about 3.5° ± 0.5°, low surface adhesion and excellent bounce ability. The superhydrophobic paper can withstand a variety of wear and tear, such as tape stripping and knife scraping. The as-prepared superhydrophobic paper showed mechanical durability even after 20 wear cycles with sandpaper,thus sustaining excellent superhydrophobicity on the filter paper surface. Moreover, it remains fully functional even in environments with high concentrations of acid and alkali for 96 h. The superhydrophobicity was not affected after storage for 6 months in a natural environment. It was confirmed that the superhydrophobic paper surface exhibited excellent chemical stability, long-term stability and self-cleaning properties. The entire production process was operated under normal environment, without complex equipment; and, as such, has the possibility for large-scale production and application in industry. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Recently, coated paper substrates have been used in a wide range of packaging applications. In this research, we present a chitosan with rosemary essential oil, paper coating as water and possible repellent resistant solution on biological basis. The aim of this research was to coat two different uncoated (also calendared) papers with a bio-based coating solution and to analyse mechanical, physical properties, resistance of coating and print ink. The resulting coated chitosan-rosemary oil, papers showed remarkable water resistance (Cobb60 values 5.18 and 4.55 g/m2). The good mechanical properties of the coated papers increased after the coating treatment. Namely, elongation at break and tear strength improved due to the structure of the coating itself. The resistance of coatings on printed surfaces also showed sufficient results for further packaging applications.

Direct methanol fuel cell (DMFC) and direct ammonia fuel cell (DAFC) have attracted wide attention due to high energy density, environment friendliness, easy availability and transportation of liquid fuel. However, the high cost and low durability of platinum (Pt) impede the large-scale application. Herein, we report a simple and effective approach to develop self-supporting electrodes (SSEs) using the square-wave potential (SWP) electrodeposition method. Compare with conventional electrode, this approach enables the absence of binder, in-situ growth of Pt catalyst on carbon paper, and easily controlled Pt morphologies. Consequently, prepared SSEs exhibit superior catalytic activity and durability toward methanol and ammonia oxidation reactions than the conventional electrode with Pt black as the catalyst. In particular, the SSE with cauliflower-like Pt catalyst exhibits the best catalytic activity and durability. This study suggests that SSE has a great potential in accelerating the practical application of direct liquid fuel cell (DMFC and DAFC). [Display omitted] • Self-supporting electrode was developed by direct growth of Pt on carbon paper. • Different Pt morphologies were obtained by tuning lower potential of SWP method. • Prepared self-supporting electrode exhibited highly efficient Pt utilization. • All electrodeposited Pt showed superior activity and durability for MOR and AOR. • Cauliflower-like Pt catalyst exhibited the highest mass activity and durability. [ABSTRACT FROM AUTHOR]

Durable papers should exhibit high mechanical strength and good soiling resistance. In this study, cellulose nanofibrils (CNF) was investigated as an additive to the polyvinyl alcohol (PVA) impregnation solution to improve the durability of paper. The impregnation suspensions were prepared by adding CNF to PVA solution in various ratios, and were used to impregnate a base paper. The PVA-CNF suspensions exhibited good dispersion stability; however, the low shear viscosity increased as its CNF content increased. The pickup weights of the papers impregnated with the PVA-CNF suspensions were found to be lower than those of the control sample, which were impregnated with the pure PVA solution only. Although the strength of the paper was not significantly improved by the addition of CNF, when the paper was impregnated with a PVA-CNF suspension containing 5% CNF content, the product exhibited similar strength to the papers impregnated with only a 3% PVA solution despite its lower pickup weight. The mechanical strength of the impregnated paper was affected by the pickup weight and penetration of the impregnating agent. The addition of a wet strengthening agent to the mixed suspensions was seen to enhance the wet soiling resistance of the papers.

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

To study the influence of different concentrations of zinc oxide (ZnO)/silicon dioxide (SiO2) composite coating on hydrophobic property and mechanical stability of paper mulch film, three kinds of ZnO/SiO2 composite coating paper mulch films (2%, 4%, 6%) with different coating substance contents were prepared by brush coating method. Through particle size analysis, contact angle, rolling angle and mechanical stability test, combined with scanning electron microscope, three-dimensional morphology and roughness measuring instrument, the optimal concentration of ZnO/SiO2 composite coated paper mulch film was screened out. Through acid-base salt corrosion test, silver mirror reaction and surface self-cleaning, the optimal concentration of composite coated paper mulch film was compared with the original paper mulch film to prove its excellent chemical stability and hydrophobicity. The results show that the paper mulch film with 4% coating material has excellent hydrophobicity and mechanical stability, can effectively reduce the surface roughness of paper mulch film, and has remarkable effects in resisting acid, alkali and salt and self-cleaning.

In China, Xuan paper has been the paper of choice as artwork support and for conservation, for several centuries. However, little is known about its material properties, especially given the many grades of sized and unsized Xuan paper. In addition, there is a lack of information on its degradation. In this research, a selection of contemporary unsized Xuan papers was investigated, representing diverse raw materials. Seven out of twelve contemporary unsized Xuan papers were determined to be approximately neutral and contain > 2% alkaline reserve, indicating good durability. Viscometry was used to determine the degree of polymerisation (DP) as none of the samples gave significant reactions to the phloroglucinol spot test. The average DP of ten contemporary unsized Xuan papers is ~ 1700, excluding two papers that have presumably been sun-bleached, and that exhibit significantly lower DP. Using X-ray fluorescence, it can be demonstrated that Ca and Si are the dominant elements and interestingly, Ca content is directly correlated with ash content and with alkaline reserve. Accelerated degradation was performed at two sets of environmental conditions, i.e. 90 °C, 30% RH and 60 °C, 70% RH, and the established degradation rates agreed with the Collections Demography model of paper degradation meaning that degradation of Xuan papers proceeds in the same way as other types of paper. This research gives fundamental insights into contemporary unsized Xuan papers, which exhibit good stability during accelerated degradation despite the low starting DP in the context of the samples used in this study. Our findings may inform methods of Xuan paper production, selection of Xuan paper for conservation purposes, as well as preventive conservation of Xuan paper-based artefacts. [ABSTRACT FROM AUTHOR]

The general method of producing fluorescent paper by coating fluorescent substances onto paper base faces the problems of low efficiency and poor durability. Bacterial cellulose (BC) with its nanoporous structure can be used to stabilize fluorescent particles. In this study, we used a novel method to produce fluorescent paper by first making Eu/BC complex and then processing the complex and cellulosic fibers into composite paper sheets. For this composting method, BC can form very stable BC/Eu complex due to its nanoporous structure, while the plant-based cellulosic fibers reduce the cost and provide stiffness to the materials. The fluorescent paper demonstrated a great fluorescent property and efficiency. The ultraviolet absorbance or the fluorescent intensity of the Eu-BC fluorescent paper increased with the increase of Eu-BC content but remained little changed after Eu-BC content was higher than 5%. After folding 200 times, the fluorescence intensity of fluorescent paper decreased by only 0.7%, which suggested that the Eu-BC fluorescent paper has great stability and durability.

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of New Building Materials / Xinxing Jianzhu Cailiao is the property of New Building Materials Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

With the strong increase of mobile data‐communication needs, mobile devices become more important than ever. To be able to provide the users the best experience, display sizes will need to increase while portability needs to be maintained. Flexible, foldable and rollable displays are serving these emerging user needs. This challenges every layer in the display, requiring the display panel to become thinner and thinner while maintaining robustness and reliability. This paper will talk about highly reliable photo patternable interlayers in TFT stacks and touch sensor layers based on inorganic‐organic hybrid polymers. A novel solution, that improves process‐ability for flexible display devices. In addition, hybrid polymer‐based films provide good process durability, higher transparency, and higher environmental durability. Therefore, these new formulations are a key enabler for foldable and rollable OLED and e‐paper displays. [ABSTRACT FROM AUTHOR]

Superhydrophobic paper with remarkable durability is of considerable interest for its practical applications. In this study, a scalable, inexpensive, and universal surface sizing technique was implemented to prepare superhydrophobic paper with enhanced durability. A thin layer of starch-based composite, acting as a bio-binder, was first coated onto the paper surface by a sophisticated manufacturing technique called surface sizing, immediately followed by a spray coating of hexamethyl disilazane treated silica nanoparticles (HMDS-SiNPs) dispersed in ethanol on the surface of the wet starch-coated sheet, and the dual layers dried at the same time. Consequently, durable superhydrophobic paper with bi-layer structure was obtained after air drying. The as-prepared superhydrophobic paper not only exhibited a self-cleaning behavior, but also presented an enhanced durability against scratching, bending/deformation, as well as moisture. The universal surface sizing of starch-based composites may pave the way for the up-scaled and cost-effective production of durable superhydrophobic paper. [ABSTRACT FROM AUTHOR]