Search

Current advances in non-invasive fluid diagnostics highlight unique benefits for monitoring metabolic diseases. However, the low concentrations and complex compositions of biomarkers in fluids such as sweat, urine, and saliva impose stringent demands on the sensitivity and stability of detection technologies. Here, we developed a high-sensitivity, low-cost instantaneous electrochemical sensor based on the superadditive effect mechanism of Cu-TCPP(Fe)/Mxene (MMs Paper-ECL Sensor), which has been successfully applied for the simultaneous real-time detection of glucose and uric acid. Strong interfacial interactions between Mxene and Cu-TCPP(Fe) were revealed through precise simulation calculations and multi-dimensional characterization analysis, significantly enhancing the sensor's electrocatalytic performance and reaction kinetics. Experimentally, this exceptional electrocatalytic activity was demonstrated in its unprecedented high sensitivity and wide linear detection range for glucose and uric acid, with a non-invasive linear range from 0.001 nM to 5 mM, 0.025 nM-5 mM, detection limits as low as 1.88 aM and 5.80 pM, and stability extending up to 100 days. This represents not only a breakthrough in sensitivity and stability but also provides an effective, low-cost solution that overcomes the limitations of existing electronic devices, enabling multi-channel simultaneous detection. The universality of this sensor holds vast potential for application in the field of non-invasive fluid diagnostics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Di(2-ethylhexyl)phthalate (DEHP) is commonly released from plastics in aqueous environment, which can disrupt endocrine system and cause adverse effects on public health. There is a pressing need to highly sensitive detect DEHP. Herein, a near-infrared (NIR) light-driven lab-on-paper cathodic photoelectrochemical aptasensing platform integrated with AgInS 2 /Cu 2 O/FeOOH photocathode and "Y"-like ternary conjugated DNA nanostructure-mediated "ON-OFF" catalytic switching of hemin monomer-to-dimer was established for ultrasensitive DEHP detection. Profiting from the collaborative roles of the effective photosensitization of NIR-response AgInS 2 and the fast hole extraction of FeOOH, the NIR light-activated AgInS 2 /Cu 2 O/FeOOH photocathode generated a markedly enhanced photocathodic signal. The dual hemin-labelled "Y"-like ternary conjugated DNA nanostructures made the hemin monomers separated in space and they maintained highly active to catalyze in situ generation of electron acceptors (O 2 ). The hemin monomers were relocated in close proximity with the help of target-induced allosteric change of DNA nanostructures, which could spontaneously dimerize into catalytically inactive hemin dimers and fail to mediate electron acceptors generation, resulting in a decreased photocathodic signal. Therefore, the ultrasensitive DEHP detection was realized with a linear response range of 1 pM-500 nM and a detection limit of 0.39 pM. This work rendered a promising prototype to construct powerful paper-based photocathodic aptasensing system for sensitive and accurate screening of DEHP in aqueous environment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, a hydrothermal process was utilized to grow mixed-valence CuFe 2 O 4 /Cu 0 nanosheets on carbon fiber paper, forming a three-dimensional hierarchical electrode (CuFe 2 O 4 /Cu 0 @CFP). The ordered array structure, coupled with the porous bowl-like structure, enhances the exposure of more electrode active sites and facilitates analyte penetration, thus enhancing the electrode sensing performance. As a binder-free sensor, the CuFe 2 O 4 /Cu 0 @CFP sensor exhibited remarkable sensitivity in detecting Malachite Green (MG), Sunset Yellow (SY) and Tartrazine (TA) over wide concentration ranges: 0.1-300 μM for MG (R 2  = 0.994), 0.005-200 μM for SY (R 2  = 0.996), and 0.005-300 μM for TA (R 2  = 0.995) with low detection limits of 0.033 μM for MG, 0.0016 μM for SY, and 0.0016 μM for TA (S/N = 3), respectively. Additionally, the 3D CuFe 2 O 4 /Cu 0 @CFP sensor detected MG, SY, and TA in a mixed solution with satisfactory results. It also performs well in beverage, fruit juice powder, and jelly samples, with results matching those from HPLC., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: Efficient monitoring of glucose concentration in the human body necessitates the utilization of electrochemically active sensing materials in nonenzymatic glucose sensors. However, prevailing limitations such as intricate fabrication processes, lower sensitivity, and instability impede their practical application. Herein, ternary Cu-Co-Ni-S sulfides nanoporous network structure was synthesized on carbon fiber paper (CP) by an ultrafast, facile, and controllable technique through on-step cyclic voltammetry, serving as a superior self-supporting catalytic electrode for the high-performance glucose sensor., Results: The direct growth of free-standing Cu-Co-Ni-S on the interconnected three-dimensional (3D) network of CP boosted the active site of the composites, improved ion diffusion kinetics, and significantly promoted the electron transfer rate. The multiple oxidation states and synergistic effects among Co, Ni, Cu, and S further promoted glucose electrooxidation. The well-architected Cu-Co-Ni-S/CP presented exceptional electrocatalytic properties for glucose with satisfied linearity of a broad range from 0.3 to 16,000 μM and high sensitivity of 6829 μA mM - 1 cm - 2 . Furthermore, the novel sensor demonstrated excellent selectivity and storage stability, which could successfully evaluate the glucose levels in human serum. Notably, the novel Cu-Co-Ni-S/CP showed favorable biocompatibility, proving its potential for in vivo glucose monitoring., Conclusion: The proposed 3D hierarchical morphology self-supported electrode sensor, which demonstrates appealing analysis behavior for glucose electrooxidation, holds great promise for the next generation of high-performance glucose sensors., (© 2024. The Author(s).)

Along with the developing of flexible electronics, there is a strong interest in high performance flexible energy storage materials. As natural carbohydrate polymer, cellulose fibers have potential applications in the area due to their biodegradability and flexibility. However, their conductive and electrochemical properties are impossible to meet the demands of practical applications. In this study, cellulose fibers were combined with polyaniline to develop novel paper-based supercapacitor electrode material. Cellulose fibers were firstly coordinated to Cu(II) and subsequently involved in polymerization of polyaniline. Not only the mass loading of polyaniline was significantly increased, but also an impressive area specific capacitance (2767 mF/cm 2 at 1 mA/cm 2 ) was achieved. The developed strategy is efficient, environmentally friendly, and has implications for the development of cellulosic paper-based advanced functional materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Simple, portable, and low-cost paper-based sensors are alternative devices that have the potential to replace high-cost sensing technologies. The compatibility of the paper base biosensors for both chemical and biochemical accentuates its feasibility for application in clinical diagnosis, environmental monitoring, and food quality monitoring. High concentration of copper in blood serum and urine is associated with diseases like liver diseases, carcinomas, acute and chronic infections, rheumatoid arthritis, etc. Detection of copper concentration can give an early sign of Alzheimer disease. Apart from that genetic Wilson's disease can be detected by evaluating the concentration of copper in the urine. In view of the above advantages, a novel and the highly sensitive paper-based sensor has been designed for the selective detection of Cu 2+ ions. The fast and highly sensitive chemiresistive multi-dye system sensor can detect Cu 2+ ions selectively in as low as 2.23 ppm concentration. Least interference has been observed for counter ion in the detection of Cu 2+ . Copper chloride, nitrate, and acetate were used to validate the detection process. This assay provides a very high selectivity of Cu 2+ ion over other metal cations such as Na + , Mg 2+ , Ca 2+ , etc. The easy preparation and high stability of dye solutions, easy functionalization of the paper-based sensors, high selectivity over other cations, low interference of counter anion, and significantly low detection limit of 2.23 ppm make it an effective Cu 2+ ion sensor for real-time application in near future., (© 2023. The Author(s).)

In recent years, whole-cell biosensors (WCBs) have emerged as a potent approach for environmental monitoring and on-site analyte detection. These biosensors harness the biological apparatus of microorganisms to identify specific analytes, offering advantages in sensitivity, specificity, and real-time monitoring capabilities. A critical hurdle in biosensor development lies in ensuring the robust attachment of cells to surfaces, a crucial step for practical utility. In this study, we present a comprehensive approach to tackle this challenge via engineering Escherichia coli cells for immobilization on paper through the Curli biofilm pathway. Furthermore, incorporating a cellulose-binding peptide domain to the CsgA biofilm protein enhances cell adhesion to paper surfaces, consequently boosting biosensor efficacy. To demonstrate the versatility of this platform, we developed a WCB for copper, optimized to exhibit a discernible response, even with the naked eye. To confirm its suitability for practical field use, we characterized our copper sensor under various environmental conditions-temperature, salinity, and pH-to mimic real-world scenarios. The biosensor-equipped paper discs can be freeze-dried for deployment in on-site applications, providing a practical method for long-term storage without loss of sensitivity paper discs demonstrate sustained functionality and viability even after months of storage with 5 μM limit of detection for copper with visible-to-naked-eye signal levels. Biofilm-mediated surface attachment and analyte sensing can be independently engineered, allowing for flexible utilization of this platform as required. With the implementation of copper sensing as a proof-of-concept study, we underscore the potential of WCBs as a promising avenue for the on-site detection of a multitude of analytes., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Urartu Ozgur Safak Seker reports financial support was provided by "The Scientific and Technological Research Council of Turkey". If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Laccases (EC 1.10.3.2) are considered one of the most prominent multicopper enzymes that exhibit the inherent properties of oxidizing a range of phenolic substrates. Mostly, reported laccases have been isolated from the plants and fungi species, whereas bacterial laccases are yet to be explored. Bacterial laccases have numerous distinctive properties over fungal laccases, including stability at high temperatures and high pH. This study includes the isolation of bacteria through the soil sample collected from the paper and pulp industry; the highest laccase-producing bacteria was identified as Bhargavaea bejingensis, using 16S rRNA gene sequencing. The extracellular and intracellular activities after 24 h incubation were 1.41 U/mL and 4.95 U/mL, respectively. The laccase-encoding gene of the bacteria was sequenced; moreover, the in vitro translated protein was bioinformatically characterized and asserted that the laccase produced by the bacteria Bhargavaea bejingensis was structurally and sequentially homologous to the CotA protein of Bacillus subtilis. The enzyme laccase produced from B. bejingensis was classified as three-domain laccase with several copper-binding residues, where a few crucial copper-binding residues of the laccase enzyme were also predicted., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

The potential reach of point-of-care (POC) diagnostics into daily routines for exposure to reactive oxygen species (ROS) and Cu in aerosolized particulate matter (PM) demands that microfluidic paper-based analytical devices (μPADs) take into consideration the simple detection of these toxic PM components. Here, we propose μPADs with a dual-detection system for simultaneous ROS and Cu(II) detection. For colorimetric ROS detection, the glutathione (GSH) assay with a folding design to delay the reaction yielded complete ROS and GSH oxidation, and improved homogeneity of color development relative to using the lateral flow pattern. For electrochemical Cu(II) determination, 1,10-phenanthroline/Nafion modified graphene screen-printed electrodes showed ability to detect Cu(II) down to pg level being low enough to be applied to PM analysis. No intra- and inter-interference affecting both systems were found. The proposed μPADs obtained LODs for 1,4-naphthoquinone (1,4-NQ), used as the ROS representative, and Cu(II) of 8.3 ng and 3.6 pg, respectively and linear working ranges of 20 to 500 ng for ROS and 1 × 10 -2 to 2 × 10 2 ng for Cu(II). Recovery of the method was between 81.4 and 108.3% for ROS and 80.5-105.3% for Cu(II). Finally, the sensors were utilized for simultaneous ROS and Cu(II) determination in PM samples and the results statistically agreed with those using the conventional methods at 95% confidence., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Excessive copper (Cu2+) causes adverse effects on human health and the ecological environment. Traditional methods for detecting Cu2+ have drawbacks such as high detection costs, complex operating conditions, and being time consuming. Therefore, there is an urgent need to develop simple detection methods to better meet specific health and environment quality needs. In this work, a paper-based fluorescence sensor was prepared (herein referred to as the as-prepared method) by immersing filter paper in aqueous polyethyleneimine (PEI) solution, and its potential use in Cu2+ detection was investigated. The results showed that the as-prepared paper samples, with fluorescence properties obtained by aggregation-induced luminescence of PEI, have selective recognition of Cu2+ based on the internal filtration effect, and the lowest detection limit is 0.03 μM. In addition, the relative error of this method is in the range of 1.80~2.23%, which is relatively comparable to the national standard method (0.63~630 μM), demonstrating high accuracy. Therefore, paper-based sensors with a simple preparation method have potential applications in the detection of Cu2+ in water. [ABSTRACT FROM AUTHOR]

A simple and effective ratiometric fluorescence sensor of CdTe QDs/GCNNs for on-site and rapid analysis of Cu 2+ has been established by mixing physically CdTe QDs and graphite carbon nitride (GCNNs). Two emissions peaks of CdTe QDs at 572 nm and GCNNs at 436 nm are both excitated at 340 nm. Under a UV lamp, fluorescent of traffic yellow CdTe QDs is linearly quenched by Cu 2+ (as the detection signal), while blue GCNNs remains unchanged (as the reference), resulting in a distinguishable color change gradually from pink yellow to blue. The limit of detection (LOD) of this new sensor for Cu 2+ is as low as 0.47 ng mL -1 with 1.4 % RSD. The established method has been successfully applied to detection of Cu 2+ in various drinks with satisfactory results. Moreover, a paper-based sensor, which has been prepared by soaking cellulose acetate membrane in CdTe QDs/GCNNs sensor solution, has a wide semiquantitative detection range for Cu 2+ (0.01 ~ 5.0 μg mL -1 ). It has realized successfully on-site and rapid determination of Cu 2+ in red wine without any pretreatment procedure and is of great promotion and application value in determination of Cu 2+ in liquid samples., (© 2020 American Society for Photobiology.)

A paper-based analytical device (PAD) with an integrated composite electrode for non-enzymatic creatinine sensing was developed. The electrode was produced and optimization was efficiently accomplished using a rapid digital dispensing approach. The electrochemical sensor was fabricated using an HP D300 digital dispenser to deliver a copper oxide and ionic liquid composite onto an electrochemically reduced graphene modified screen-printed carbon electrode (CuO/IL/ERGO/SPCE) on a PAD. The modified electrode was characterized using electrochemical and microscopic techniques. Electrochemical detection of creatinine was performed on the SPCE using amperometry at a constant potential. Under optimized conditions, the paper-based sensor exhibited a linear range of 0.01-2.0 mM (R 2  = 0.99) and the limit of detection was 0.22 μM (S/N = 3, IUPAC definition) for creatinine. The simple fabrication process, low cost, and clinically appropriate creatinine sensitivity make this device applicable for point-of-care use., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The condensation product (L) of 4,4'-methylenedianiline and p-anisaldehyde acts as colorimetric sensor for Cu 2+ and Pb 2+ ions. On interaction with Cu 2+ , ethanolic solution of L changes its color to brown while it becomes light pink on interaction with Pb 2+ . Interaction of Al 3+ with L coated paper strip emits bright blue fluorescence. Metal ions like Mg 2+ , Cu 2+ , Li + , K + , Na + , Mn 2+ , Al 3+ , Hg 2+ , Co 2+ , Pb 2+ , Ni 2+ , Cd 2+ , Zn 2+ , Fe 3+ do not interfere the paper strip sensor. The fluorescent intensity of L in ethanol is quenched 25 times by Pb 2+ ion. The interaction between L and Pb 2+ is reversible and the detection limit of Pb 2+ is 10 -6  M. The binding constant and stoichiometry of binding between L and Pb 2+ was calculated to be 10 4.8 and 1:2. Theoretical calculations show that the binding of the metal ions to L are favorable and the fluorescence of L is due to π → π* transition.

A novel colorimetric probe RP1 was synthesized using rhodamine derivatives and heterocyclic compounds for the purpose of detecting Cu 2+ . RP1 showed good selectivity, high sensitivity and affinity toward Cu 2+ over other competing ions in CH 3 OH-H 2 O (1/1, v/v) solution. Absorbance intensity showed a good linear fit between probe R1 and Cu 2+ over the concentration range 1-8 μM and the association constant was also calculated to be 1.145 × 10 5 M -1 . The sensing mechanism was deduced using Job's plot, Fourier transform infrared spectroscopy, and density functional theory studies. In addition, the colorimetric experiment indicated that probe RP1 could be made into test paper to detect Cu 2+ with a colour change from colourless to pink., (© 2020 John Wiley & Sons, Ltd.)

An enhanced ratiometric fluorescence sensor was built for on-site visual detection of doxycycline (DOX) through the interaction with bovine serum albumin on the surface of red emissive copper nanoclusters. Upon the addition of weakly fluorescent DOX, the red fluorescence from copper nanoclusters gradually decreased through the inner-filter effect (IFE), while a green fluorescence appears and significantly increases, forming an interesting fluorescent isosbestic point, which was assigned to DOX due to sensitization effect of bovine serum albumin. On the basis of this ratiometric fluorescence, the system possessed good limit of detection (LOD) of 45 nM and excellent selectivity for DOX over other tetracyclines. Based on these findings, a paper-based sensor has been fabricated for distinct visual detection of trace DOX and combined with smartphone color recognizer for quantitative detection of DOX (LOD = 83 nM). This method shows broad application prospects in environmental monitoring and food safety., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

In the realm of electrochemical nitrite detection, the potent oxidizing nature of nitrite typically necessitates operation at high detection potentials. However, this study introduces a novel approach to address this challenge by developing a highly sensitive electrochemical sensor with a low reduction detection potential. Specifically, a copper metal nanosheet/carbon paper sensitive electrode (Cu/CP) was fabricated using a one-step electrodeposition method, leveraging the catalytic reduction properties of copper's high occupancy d-orbital. The Cu/CP sensor exhibited remarkable performance in nitrite detection, featuring a low detection potential of −0.05 V vs. Hg/HgO, a wide linear range of 10~1000 μM, an impressive detection limit of 0.079 μM (S/N = 3), and a high sensitivity of 2140 μA mM−1cm−2. These findings underscore the efficacy of electrochemical nitrite detection through catalytic reduction as a means to reduce the operational voltage of the sensor. By showcasing the successful implementation of this strategy, this work sets a valuable precedent for the advancement of electrochemical low-potential nitrite detection methodologies. [ABSTRACT FROM AUTHOR]

The role of humidity sensors in different industries and field applications, such as agriculture, food monitoring, biomedical equipment, heating, and ventilation, is well known. However, most commercially available humidity sensors are based on polymers or electronic materials that are not degradable and thus contribute to electronic waste. Here, we report a low-cost, flexible, easy-to-fabricate, and eco-friendly parallel-plate capacitive humidity sensor for field applications. The sensor is fabricated from copper tape and tissue paper, where copper tape is used to create the plates of the capacitor, and tissue paper is used as a dielectric sensing layer. Along with the low cost, the high sensitivity, better response and recovery times, stability, and repeatability make this sensor unique. The sensor was tested for relative humidity (RH), ranging from 40% to 99%, and the capacitance varied linearly with RH from 240 pF to 720 pF, as measured by an Arduino. The response time of the sensor is ~1.5 s, and the recovery time is ~2.2 s. The experiment was performed 4-5 times on the same sensor, and repeatable results were achieved with an accuracy of ±0.1%. Furthermore, the sensor exhibits a stable response when tested at different temperatures. Due to the above advantages, the presented sensor can find ready applications in different areas.

The copper(II) ion (Cu 2+ ) has played an indispensable role in diverse kinds of functional physiological processes of organisms, which has become of growing interest. Despite the fact that numerous Cu 2+ test papers using fluorescent probes have been fabricated, sensors featuring the ratiometric property that integrates quenched probes and an inner standard dye are rarely reported. Herein, a two-component ratiometric sensor in a paper-based device is proposed to realize highly selective Cu 2+ detection. To overcome shortcomings such as low signal-to-noise ratio and incorrect response of the quenching probe, a novel BODIPY-based turn-off probe (P2017) is designed and introduced into the paper-based device with better water solubility and selectivity for Cu 2+ detection. Furthermore, a reference dye (B001), exhibiting an emission at 690 nm when the excitation wavelength is 480 nm, is also introduced into the paper-based device. These two components can enhance the quality of the signal as P2017 is sensitively quenched by Cu 2+ , while B001 with a photostable property, serving as an internal benchmark, is unable to react with Cu 2+ . The results indicated that the two components provided a new concept for optimizing paper-based device fabrication and developing accurate, simple, and inexpensive Cu 2+ detection methods, which could be potentially applied to monitor human health and the environment in remote areas. Graphical abstract.

A stable and reproducible layer of Prussian blue (PB) modified with copper was electrodeposited on carbon paper electrodes for the multiple detection of ester flavorants with a bienzymatic biosensor. Carbon fiber composite paper was investigated as high-surface, low-cost substrate for biosensor development. The pre-activation of the electrode surface by cyclic voltammetry was necessary to improve the electrochemical properties before the electrochemical deposition of Prussian blue-copper film (PB-Cu). The stability and the reproducibility of the obtained PB-Cu carbon paper electrode was demonstrated at pH 7.4, optimum for biosensor development. The developed biosensor is based on the immobilization of two enzymes (carboxyl esterase and alcohol oxidase) by cross-linking with glutaraldehyde onto PB-Cu carbon paper electrode. A mixture of key aroma ester compounds (methyl butyrate, ethyl butyrate, methyl cinnamate and ethyl cinnamate) was detected in several food samples with low interferences., (Copyright © 2019 Elsevier B.V. All rights reserved.)

A calix[4]arene based compound incorporating amide and morpholine moieties has been synthesized and its ion recognition property towards metal ions and application of its metal complex towards sensing of amino acids has been investigated. The synthesized compound interacts with Cu 2+ with high selectivity and sensitivity (LOD, 0.1 ppb) in aqueous media with instant color change from colorless to yellow without interference from any other metal ions used in this study. The molecular structure of the calix compound (1) has been determined by single crystal X-ray study and the structure of its Cu 2+ complex has been established by DFT calculation. The Cu 2+ complex of 1 selectively detects tyrosine (LOD, 1.2 ppm) in water with distinct color change and without any interference from other 22 amino acids used in this study. The mechanism for detection of tyrosine with color change is also presented. For easy field application, paper based sensor strips have been prepared by coating compound 1 and its Cu 2+ complex on filter paper, which have been used for semi-quantitative measurement of Cu 2+ and tyrosine. Compound 1 and its Cu 2+ complex have also been used for detection of Cu 2+ and tyrosine, respectively in water and human saliva as real samples and satisfactory results are obtained., Competing Interests: Declaration of competing interest The authors declare no competing financial interest. The authors also declare no conflict of interest in this work., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The present study focused on improving sensitivity to trace levels of Cu(II) by subjecting microfluidic paper-based analytical devices (μ-PADs) to a preconcentration process via coprecipitation using aluminum hydroxide. The experimental conditions were optimized for the pH of the coprecipitation, centrifugation, and amounts of reagents that were deposited onto µ-PADs for the Cu(II) assay. The resultant limit of detection reached as low as 0.003 mg L -1 with a linear range of 0.01-2.00 mg L -1 . The relative standard deviations for intra- and inter-day precision were 3.2 and 4.6%, respectively (n = 9). Spiked water samples were analyzed using the μ-PADs after coprecipitation preconcentration. The results were verified by comparing them with those of inductively coupled plasma-optical emission spectrometry (ICP-OES). Recoveries ranged from 97.1 to 104% and from 98.7 to 105% using the present method and ICP-OES, respectively. These results suggest that the simple, highly sensitive, and inexpensive proposed method would be helpful for analyzing trace levels of Cu(II) in water samples in poorly equipped laboratories., (© 2022. The Author(s), under exclusive licence to The Japan Society for Analytical Chemistry.)

Meso-tetrakis(1,2-dimethylpyrazolium-4-yl)porphyrin sulfonate (TDMPzP), a water-soluble porphyrin derivative, was synthesized and used as a colorimetric reagent for Cu 2+ detection on a microfluidic paper-based analytical device (µPAD) using distance-based quantification. TDMPzP showed a high selectivity for Cu 2+ detection in aqueous solutions. When Cu 2+ was added to the TDMPzP under acidic conditions, a color change from green to a pink was observed by the naked eye. Under optimized conditions, the application of this system to a distance-based μPAD exhibited good analytical response. The presence of common metal ions (Al 3+ , Fe 3+ , Mg 2+ , Co 2+ , Mn 2+ , Zn 2+ , Pb 2+ , Cd 2+ , Sn 2+ , and Ni 2+ ) did not interfere with Cu 2+ detection within reasonable tolerance ratios. The lowest concentration of copper that could be measured was 1mgL -1 (1ppm) which meets the requirements for drinking water contamination regulations from the US Environmental Protection Agency (EPA) and World Health Organization (WHO) guidelines for drinking water. Real drinking water samples were analyzed to confirm the practical application of this system and the results showed good agreement with ICP-MS data. This distance-based µPAD based on TDMPzP for Cu 2+ detection is convenient and effective for real-time drinking water analysis., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Flexible sweat biosensors are of considerable current interest for the development of wearable smart miniature devices. In this work, we report a novel type of flexible and electrochemical sweat platform fabricated by depositing Cu submicron buds on freestanding graphene paper (GP) carrying MoS 2 nanocrystals monolayer for bio-functional detection of glucose and lactate. Quantitative analysis of glucose and lactate was carried out by using amperometric i-t method. Linear ranges were obtained between 5 and 1775 μM for glucose and 0.01-18.4 mM for lactate, and their corresponding limits of detection were 500 nM and 0.1 μM, respectively. The platform demonstrates fast response, good selectivity, superb reproducibility and outstanding flexibility, which enable its use for monitoring glucose and lactate in human perspiration. The strategy of structurally integrating 3D transition metal, 0D transition metal sulfide and 2D graphene will provide new insight into the design of flexible electrodes for sweat glucose and lactate monitoring and a wider range of applications in biosensing, bioelectronics, and lab-on-a-chip devices., (Copyright © 2017. Published by Elsevier Inc.)

In this study, two-dimensional (2D) and three-dimensional (3D) freestanding reduced graphene oxide-supported Cu 2 O composites (Cu 2 O-rGO) were synthesized via simple and cost-efficient hydrothermal and filtration strategies. The structural characterizations clearly showed that highly porous 3D graphene aerogel-supported Cu 2 O microcrystals (3D Cu 2 O-GA) have been successfully synthesized, and the Cu 2 O microcrystals are uniformly assembled in the 3D GA. Meanwhile, paper-like 2D reduced graphene oxide-supported Cu 2 O nanocrystals (2D Cu 2 O-rGO-P) have also been prepared by a filtration process. It was found that the products prepared from different precursors and methods exhibited different sensing performances for H 2 O 2 detection. The electrochemical measurements demonstrated that the 3D Cu 2 O-GA has high electrocatalytic activity for the H 2 O 2 reduction and excellent sensing performance for the electrochemical detection of H 2 O 2 with a detection limit of 0.37 μM and a linear detection range from 1.0 μM to 1.47 mM. Meanwhile, the 2D Cu 2 O-rGO-P structure also showed good electrochemical sensing performance toward H 2 O 2 detection with a much wider linear response over the concentration range from 5.0 μM to 10.56 mM. Compared to the previously reported sensing materials, the as-obtained 2D and 3D Cu 2 O-rGO materials exhibited higher electrochemical sensing properties toward the detection of H 2 O 2 with high sensitivity and selectivity. The 2D and 3D Cu 2 O-rGO composites also exhibited high sensing performance for the real-time detection of H 2 O 2 in human serum. The present study indicates that 2D and 3D graphene-Cu 2 O composites have promising applications in the fabrication of nonenzymatic electrochemical sensing devices.

A new chemosensor 1 was synthesized by reacting rhodamine B hydrazide and 2,3,4-trihydroxybenzaldehyde, which was then characterized by spectroscopic techniques and single crystal X-ray crystallography. Sensor 1 has the ability to sense Co 2+ /Cu 2+ ions by "naked-eye" with an apparent colour change from colourless to pink in different solvent system, MeCN and DMF respectively. Furthermore, it can selectively detect Co 2+ /Cu 2+ among wide range of different metal ions, and it exhibits low detection limit of 4.425 × 10 -8 M and 1.398 × 10 -7 M respectively. Binding mode of the two complexes were determined to be 1:1 stoichiometry for Co 2+ complex and 1:2 stoichiometry for Cu 2+ complex through Job's plot, IR spectroscopy, mass spectrometry and 1 H NMR spectroscopy. Moreover, reversibility of the sensor 1 as copper (II) ion detector was determined by using EDTA and the results showed that sensor 1 can be reused for at least 6 cycles. Other than that, a low cost chemosensor test strips were fabricated for the convenient "naked-eye" detection of Co 2+ and Cu 2+ in pure aqueous media. The MTT assay was conducted in order to determine the cytotoxicity of sensor 1 towards human cell lines., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Point-of-care monitoring of hydrogen peroxide is important due to its wide usage in biomedicine, the household and industry. Herein, a paper sensor is developed for sensitive, visual and selective detection of H 2 O 2 using a mesoporous metal oxide hollow sphere as a nanozyme. The mesoporous CuO hollow sphere is synthesized by direct decomposition of copper-polyphenol colloidal spheres. The obtained mesoporous CuO hollow sphere shows a large specific surface area (58.77 m 2 /g), pore volume (0.56 cm 3 /g), accessible mesopores (5.8 nm), a hollow structure and a uniform diameter (~100 nm). Furthermore, they are proven to show excellent peroxidase-like activities with K m and V max , respectively. Such mesoporous CuO hollow spheres are then loaded on the low-cost and disposable filter paper test strip. The obtained paper sensor can be effectively used for detection of H -5 M·s -1 in the range of 2.4-150 μM. This work provides a new kind of paper sensor fabricated from a mesoporous metal oxide hollow sphere nanozyme. These sensors could be potentially used in bioanalysis, food security and environmental protection.2 O 2 in the range of 2.4-150 μM. This work provides a new kind of paper sensor fabricated from a mesoporous metal oxide hollow sphere nanozyme. These sensors could be potentially used in bioanalysis, food security and environmental protection.

The porous metallic iron/carbon (Fe 0 /C) ceramsites, with virtues of low cost and 'green' fabrication, were prepared by direct reduction roasting of magnetite, coal, and paper mill sludge. The X-ray diffraction data revealed that Fe 0 was generated in situ by reducing the magnetite at 1,200 °C. Scanning electron microscopy with energy-dispersive X-ray spectroscopy indicated that Fe 0 particles, with a size of <10 μm, were highly dispersed on carbon particles to form an integrated anode (Fe 0 ) and cathode (C) structure of microelectrolysis filters. The effects of initial solution pH and Fe/C mass ratio on Cu 2+ removal were investigated. The extent of Cu 2+ removal increased from 93.53% to 99.81% as initial pH rose from 2.5 to 7.0. The residual Cu 2+ concentration was as low as <0.2 mg/L. The highest extent of Cu 2+ removal was achieved at Fe/C mass ratio of 6.8:1. The pseudo-second-order kinetic model fitted well for Cu 2+ removal by the ceramsite, revealing the chemisorption as a limiting step. The Cu 2+ adsorption equilibrium data were well described by the Langmuir isotherm, with a maximum adsorption capacity of 546.45 mg/g at initial pH 3.0.

As water effluents are often highly contaminated with metals, having a quick and cost-effective method of analysis is crucial. This study used the supernatant derived from the green synthesis of silver nanoparticles (AgNPs) with Solanum mammosum to detect mercury, copper, and iron with a low-cost cellulose paper-based sensor and a rapid colorimetric method applying ultraviolet–visible spectroscopy (UV–Vis). AgNPs in two precursor concentrations using silver nitrate, 1 mM (17.4 ± 9 nm) and 50 mM (and 22 ± 8.1 nm), were utilized to assess the efficacy of the analysis and removal of Hg2+, Cu2+, and Fe3+ from contaminated water. Cellulose paper-based sensor showed limits of detection (LODs) for Hg2+ of 2.46 and 123 μM using AgNPs at concentrations of 1 and 50 mM, respectively. For Cu2+, the LODs were 55 and 2750 μM, and for Fe3+, the LODs were 49 and 2470 μM using the respective concentrations. To differentiate and detect the cations with the naked eye, a potassium iodide and potassium ferrocyanide (1:1) aqueous solution was used, producing a yellow, pink, and blue color for Hg2+, Cu2+, and Fe3+, respectively. Additionally, the titration curves of Hg2+, Fe3+, and Cu2+ were examined by UV–Vis using the supernatant liquid. The LODs for the UV–Vis method using AgNPs at a concentration of 1 mM were 1.50 μM for Hg2+, 10.7 μM for Cu2+, and 4.33 μM for Fe3+, while the LODs for AgNPs at 50 mM were 5.75, 27.6, and 15 μM for Hg2+, Cu2+, and Fe3+, respectively. Furthermore, these nanoparticles were utilized to assess the efficacy of the removal of Hg2+, Cu2+, and Fe3+ from contaminated water. Removal efficiency with the solid 50 mM AgNPs was analyzed via flame absorption spectrophotometry; values over 95% were obtained for the three ions. The results underscore the effectiveness of a green synthesis approach to generating AgNPs, enabling efficient and economical cation analysis and water decontamination.

The fluorescent paper for colorimetric detection of metal ions has been widely fabricated using various sensing probes, but it still remains an elusive task to design a test paper with multicolor variation with target dosages for accurate determination. Herein, we report a profuse color-evolution-based fluorescent test paper sensor for rapid and visual monitoring of Cu 2+ in human urine by printing tricolor probe onto filter paper. The tricolor probe consists of blue-emission carbon dots (bCDs), green-emission quantum dots (gQDs) and red-emission quantum dots (rQDs), which is based on the principle that the fluorescence of gQDs and rQDs are simultaneously quenched by Cu 2+ , whereas the bCDs as the photostable internal standard is insensitive to Cu 2+ . Upon the addition of different amounts of Cu 2+ , the ratiometric fluorescence intensity of the tricolor probe continuously varied, leading to color changes from shallow pink to blue with a detection limit of 1.3nM. When the tricolor probe solution was printed onto a sheet of filter paper, as-obtained test paper displayed a more profuse color evolution from shallow pink to light salmon to dark orange to olive drab to dark olive green to slate blue to royal blue and to final dark blue with the increase of Cu 2+ concentration compared with dual-color probe-based test paper, and dosage scale as low as 6.0nM was clearly discriminated. The sensing test paper is simple, rapid and inexpensive, and serves as a visual platform for ultrasensitive monitoring of endogenous Cu 2+ in human urine., (Copyright © 2017 Elsevier B.V. All rights reserved.)

To better assess the stabilization effects of chemical treatments on Cu(II)-catalyzed cellulose degradation, we developed Cu(II)-containing model rag paper with typical copper corrosion characteristics using e-beam radiation. The paper can be prepared homogeneously and quickly compared to tedious pre-aging methods. Using the Cu(II)-containing model rag paper, the stabilization effects of various chemicals on Cu(II)-catalyzed degradation of cellulose were tested. Benzotriazol was highly effective in retarding the degradation of the Cu(II)-containing model rag paper under hot and humid aging condition, as well as under photo-oxidative stress. Tetrabutylammonium bromide reduced Cu(II)-catalyzed degradation of cellulose, but its efficacy was dependent on the accelerated aging conditions. The results with the alkaline treatments and gelatin treatment suggested that their roles in the degradation mechanisms of cellulose in the presence of Cu(II) differ from those of benzotriazol and tetrabutylammonium bromide., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Porous pots were used to mimic, on a laboratory scale, an industrial activated sludge plant from a thermomechanical pulp and news print paper mill. Trace metal additions of Ca, Co, Cu, Fe(III), and Mg were found to improve chemical oxygen demand removal from 82% to 86 to 87%. Copper (0.1 to 1.0 mg/L) was also found to be beneficial in significantly inhibiting the growth of filamentous bacteria, contributing to a reduction of 20 to 45% in sludge volume index (SVI) with improved settle ability and decreased bulking. However, at levels of 1.0 mg/L and higher, the concentration of Cu in the porous pot effluent would potentially exceed guidelines for receiving waters. The fate and impact of Cu was affected by the presence of other trace metals, in particular Mg and Ca. The addition of Mg or Ca along with 0.5 mg/L Cu increased the amount of Cu in the aqueous phase to levels that would potentially exceed government environmental guidelines. Calcium addition was also found to inhibit the effect of Cu in reducing filamentous bacteria and SVI.

In this work, bovine serum albumin (BSA)-Au nanoclusters were used to coat a paper-based microfluidic device. This device acted as a Cu(2+) biosensor that showed fluorescence quenching on detection of copper ions. The detection limit of this sensor could be adjusted by altering the water absorbing capacity of the device. Qualitative and semi-quantitative results could be obtained visually without the aid of any advanced instruments. This sensor could test Cu(2+) rapidly with high specificity and sensitivity, which would be useful for point-of-care testing (POCT).

This work focuses on a systematic method to produce Ag, Cu, and Ag/Cu metallic nanoparticles (MNPs) in situ assisted with ultrasound on cellulose paper. By tuning the concentration of AgNO3 and CuSO4 salt precursors and ultrasound time, combined with a fixed concentration of ascorbic acid (AA) as a reducing agent, it was possible to control the size, morphology, and polydispersity of the resulting MNPs on cellulose papers. Notably, high yield and low polydispersity of MNPs and bimetallic nanoparticles are achieved by increasing the sonication time on paper samples pre-treated with salt precursors before reduction with AA. Moreover, mechanical analysis on paper samples presenting well-dispersed and distributed MNPs showed slightly decreasing values of Young's modulus compared to neat papers. The strain at break is substantially improved in papers containing solely Ag or Cu MNPs. The latter suggests that the elastic/plastic transition and deformation of papers are tuned by cellulose and MNPs interfacial interaction, as indicated by mechanical analysis. The proposed method provides insights into each factor affecting the sonochemistry in situ synthesis of MNPs on cellulose papers. In addition, it offers a straightforward alternative to scale up the production of MNPs on paper, ensuring an eco-friendly method.

We successfully absorbed the copper ion (Cu 2+ ) and cadmium ion (Cd 2+ ) from alkaline aqueous solutions using the prepared chitosan-tannin (CTS/TA) functional paper as absorbent materials. The kinetics of the adsorption, the adsorption isotherms, and the influence of the solution flow rate and pH were investigated detailly. The adsorption data were described well by Langmuir isotherms, with maximum copper (Cu 2+ ) and cadmium (Cd 2+ ) adsorption capacities of 684.93 and 813.01 mg/m 2 , respectively. The experimental results also showed that the adsorption of these heavy metals was selective in the order of Cu 2+  > Cd 2+ , as Cu 2+ competed with Cd 2+ for bonding sites at solution concentrations greater than or equal to 200 mg/L. The results of this study illustrated that the chitosan-tannin functional paper materials mainly followed a complexation-adsorption model, and the best adsorption capacity was achieved at pH = 9. The desorption of heavy ions from this adsorbent and its reusability of functional paper was also involved. Therefore, this novel, environment-friendly functional paper can surely act as an effective adsorbent for the removal and recovery of heavy metals in alkaline aqueous solutions., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Trace elements have a significant effect on biochemical reactions and therefore the presence of optimum levels of trace elements is essential for bioreactor performances. In this study, the effects of five trace elements on biomethane production have been investigated. Experimental studies have been carried out with multiple batch reactors at 15 day HRT and mesophilic temperatures. The optimum concentrations for each of the trace elements Fe, Cu, Ni, Co and Mg were found as 5, 0.5, 0.5, 0.5 and 100 mg/L, respectively. Among tested trace elements, Cu was the one which provided the highest biomethane production. Cu addition was resulted in a 46 % increase in biomethane production followed by Co with 24 %. The biomethane production rate for these two trace elements was 191.70 and 110.77 ml CH4/g COD, respectively. Optimum levels for Ni, Fe and Mg increased biomethane production rate by approximately 14.3, 10 and 17 % compared to control groups, respectively. Because the exact amount of trace element requirement for each industry/reactor is different, specific case studies should be performed for each application. These results could be used as initial trace element concentrations for further continuous studies. [ABSTRACT FROM AUTHOR]

In this work, copper(ii)-containing metal-organic xerogels (Cu-MOXs), which were composed of copper as the central ion and 2,2'-bipyridine-6,6'-dicarboxylic acid as the ligand, were quickly synthesized by a mild facile strategy. The Cu-MOXs exhibited superior catalytic performance for the luminol-H 2 O 2 chemiluminescence (CL) system. The possible mechanism was studied via CL spectra, UV-Vis absorption and electron paramagnetic resonance (ESR). Since dopamine (DA) can inhibit the reaction of this system, a sensitive paper-based CL device for the detection of DA was established. Under the optimal experimental conditions, the linear range of this method was 40-200 nM with a detection limit of 10 nM. The proposed method was used for the determination of DA in urine samples.

In the present work, nanoparticles of copper and silver synthesized via pulsed laser ablation of the respective targets in distilled water are applied to cellulose filter paper to check their effectiveness in the annihilation of bacteria from contaminated water. The treatment of the filter paper with the nanoparticles is found to be an excellent way to get rid of two common bacteria, Staphylococcus aureus and Escherichia coli, from contaminated water. The spread plate method on agar, employed to test the antibacterial efficacy of the nanoparticle-treated papers, clearly shows the absence of bacterial growth upon coming into contact with the nanoparticles in the filter paper. These results were further substantiated by the growth kinetic study of the bacteria that exhibited slow growth of the bacteria that were exposed to the nanoparticles. The morphology of the bacteria that came into contact with the nanoparticles is found to be adversely affected by the nanoparticles. Both copper and silver nanoparticles show a similar extent of antibacterial activity.

Exposure to metal-containing aerosols has been linked with adverse health outcomes for almost every organ in the human body. Commercially available techniques for quantifying particulate metals are time-intensive, laborious, and expensive; often sample analysis exceeds $100. We report a simple technique, based upon a distance-based detection motif, for quantifying metal concentrations of Ni, Cu, and Fe in airborne particulate matter using microfluidic paper-based analytical devices. Paper substrates are used to create sensors that are self-contained, self-timing, and require only a drop of sample for operation. Unlike other colorimetric approaches in paper microfluidics that rely on optical instrumentation for analysis, with distance-based detection, analyte is quantified visually based on the distance of a colorimetric reaction, similar to reading temperature on a thermometer. To demonstrate the effectiveness of this approach, Ni, Cu, and Fe were measured individually in single-channel devices; detection limits as low as 0.1, 0.1, and 0.05 μg were reported for Ni, Cu, and Fe. Multiplexed analysis of all three metals was achieved with detection limits of 1, 5, and 1 μg for Ni, Cu, and Fe. We also extended the dynamic range for multi-analyte detection by printing concentration gradients of colorimetric reagents using an off-the-shelf inkjet printer. Analyte selectivity was demonstrated for common interferences. To demonstrate utility of the method, Ni, Cu, and Fe were measured from samples of certified welding fume; levels measured with paper sensors matched known values determined gravimetrically.

A disposable paper-based sensor (PBS) is described for the determination of Cu(II) in natural and waste waters at approximately 2 cents per measurement. The device makes use of a polymer inclusion membrane (PIM) to provide the selectivity for Cu(II). The PIM consists of 40 wt% di(2-ethlyhexyl) phosphoric acid (D2EHPA) as the carrier, 10 wt% dioctyl phthalate (DOP) as a plasticizer, 49.5 wt% poly(vinyl chloride) (PVC) as the base polymer and 0.5 wt% (mm(-1)) 1-(2'-pyridylazo)-2-naphthol (PAN) as the colourimetric reagent. High selectivity under mildly acidic conditions (HCl, pH 2.0) is achieved for Cu(II) in the presence of frequently encountered metal ions in natural and waste waters such as Fe(III), Al(III), Zn(II), Cd(II), Pb(II), Ca(II), Mg(II), and Ni(II). The laminated PBS consists of a PIM sensing disc (2mm in diameter) attached to the centre of a circular hydrophilic zone (7 mm in diameter) pretreated with 0.01 M HCl. This hydrophilic zone separates the sample port (a circular hole in the plastic cover) from the PIM sensing disc. After introducing 19.2 μL of a sample/standard solution to the sample port, Cu(II) diffuses across the hydrophilic zone and is extracted into the PIM disc as the Cu(II)-D2EHPA complex which subsequently reacts with PAN to produce the red-purple coloured Cu(II)-PAN complex. The colour intensity of the PIM disc is measured 15 min after sample/standard introduction by scanning using a flatbed scanner. Under optimal conditions the device is characterized by a limit of detection (LOD) and limit of quantitation (LOQ) of 0.06 and 0.21 mg L(-1) Cu(II), respectively, with two linear ranges together covering the Cu(II) concentration range from 0.1 to 30.0 mg L(-1). The PBS was successfully applied to the determination of Cu(II) in hot tap water and mine tailings water., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Compared to traditional lithium metal batteries, anode-free lithium metal batteries use bare current collectors as an anode instead of Li metal, making them highly promising for mass production and achieving high-energy density. The current collector, as the sole component of the anode, is crucial in lithium deposition-stripping behavior and greatly impacts the rate of Li depletion from the cathode. In this study, to investigate the lithiophilicity effect of the current collector on the solid electrolyte interface (SEI) film construction and cycling performance of anode-free lithium batteries, various lightweight paper-based current collectors were prepared by electroless plating Cu and lipophilic Ag on low-dust paper (LDP). The areal densities of the as-prepared LDP@Cu, LDP@Cu-Ag, and LDP@Ag were approximately 0.33 mg cm−2. The use of lipophilic Ag-coated collectors with varying loadings allowed for the regulation of lipophilicity. The impacts of these collectors on the distribution of SEI components and Li depletion rate in common electrolytes were investigated. The findings suggest that higher loadings of lipophilic materials, such as Ag, on the current collector increase its lipophilicity but also lead to significant Li depletion during the cycling process in full-cell anode-free Li metal batteries. Thus, moderately lithiophilic current collectors, such as LDP@Cu-Ag, show more potential for Li deposition and striping and stable SEI with a low speed of Li depletion. [ABSTRACT FROM AUTHOR]

The probabilistic ecological risk assessment using terrestrial toxicity data has been mainly based on microfauna or mesofauna. Soil algae, which are food source for microfauna and mesofauna, may be alternatively used for assessing soil toxicity. However, there are no internationally recommended guidelines for soil algal bioassays, and the collection of algae from the test soils has some limitations. In this study, we suggested the paper-disc method as an easy-to-use alternative. This method has been widely used for testing the antibacterial toxicity of various chemicals in agar media by measuring the diameter of the inhibition zone around the disc. We adapted the paper-disc method for screening the toxicity of copper (Cu) and nickel (Ni) to the soil alga Chlorococcum infusionum using various evaluation endpoints, such as growth zone, chlorophyll fluorescence, and photosynthetic activity. Chlorophyll fluorescence and photosynthetic activity decreased with the increasing concentrations of Cu(+2) or Ni(+2) contaminated soils. Algal growth zone was analyzed visually and showed similar results to those of chlorophyll fluorescence. The direct ethanol extraction method and indirect culture medium extraction method were similarly effective; however, the former was easier to perform, while the latter might facilitate the analysis of additional endpoints in future studies. Overall, the results suggested that the paper-disc method was not only a user-friendly assay for screening soil toxicity, but also effective due to its association with indirect soil quality indicators., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

We studied the avoidance behaviour of the earthworm Eisenia fetida towards Cd, Cu, and Zn, trace elements (TEs) tested as chloride, nitrate and sulphate salts. Sub adults were exposed individually using dual-cell chambers at 20+2°C in the dark. Recordings were realised at different dates from 2h to 32h. We used filter paper and extruded water agar gel as exposure media to evaluate the contribution of the dermal and the digestive exposure routes on the avoidance reactions. Exposures to Cu or Cd (10mgmetal ionL(-1)) resulted in highly significant avoidance reactions through the exposure duration. Worms avoided Zn poorly and reactions towards Zn salts varied along the exposure. Worm sensitivity towards TEs differed between salts and this could result from differential toxicity or accessibility of these TE salts to earthworms. The anion in itself was not the determinant of the avoidance reactions since exposures to similar concentrations of these anions using calcium salts did not result in significant avoidance worm behaviour. Avoidance responses towards TEs were higher in the case of water agar exposures than in filter paper exposures. Thus, dermal contacts with TE solutions would elicit worm avoidance but signals from receptors located inside the digestive tract could reinforce this behaviour. The use of extruded water agar gels as the substrate allows checking the real sensitivity of earthworm species towards TEs since the TE concentrations leading to significant avoidance reactions were below those reported in the literature when using TE-spiked soils., (Copyright © 2016 Elsevier Inc. All rights reserved.)

A biomimetic device for the reduction of Cu(ii) to Cu(i) consisting of thioglycolic acid covalently grafted to cellulose paper was developed. The device displays exceptionally fast reducing properties allowing the reduction of Cu(ii) in seconds and the formation of deeply colored Cu(i)-SCH2R complexes onto the cellulose paper. This biomimetic and biomaterial-based concept was exploited for the detection of copper in water samples with a limit of detection as low as 2 ppm.

A simple and effective ratiometric fluorescence nanosensor for the selective detection of Cu(2+) has been developed by covalently connecting the carboxyl-modified red fluorescent cadmium telluride (CdTe) quantum dots (QDs) to the amino-functionalized blue fluorescent carbon nanodots (CDs). The sensor exhibits the dual-emissions peaked at 437 and 654 nm, under a single excitation wavelength of 340 nm. The red fluorescence can be selectively quenched by Cu(2+), while the blue fluorescence is a internal reference, resulting in a distinguishable fluorescence color change from pink to blue under a UV lamp. The detection limit of this highly sensitive ratiometric probe is as low as 0.36 nM, which is lower than the U.S. Environmental Protection Agency (EPA) defined limit (20 μM). Moreover, a paper-based sensor has been prepared by printing the hybrid carbon dots-quantum dots probe on a microporous membrane, which provides a convenient and simple approach for the visual detection of Cu(2+). Therefore, the as-synthesized probe shows great potential application for the determination of Cu(2+) in real samples.

The development of a user-friendly sensing platform for the detection of Cu(2+) in water is necessary as there are wide concerns due to the substantial impact of Cu(2+) on human health, environmental monitoring, and so on. Motivated by this, we report a fluorescent silver nanoclusters (AgNCs)-based sensor for the detection of Cu(2+). These water-soluble AgNCs, as a new class of fluorescent probes, were synthesized by using azobenzene modified poly(acrylic acid) (MPAA) as templates. Their fluorescence can be quenched in the presence of Cu(2+), which enables the label-free detection of Cu(2+) in real water samples. Furthermore, such AgNCs can be integrated onto cellulose filter paper and used as fluorescent indicators for Cu(2+). The fluorescence quenching can be observed by the naked eye under UV light. It should be noted that this AgNCs-based paper assay performs successfully in barrelled drinking water and river water samples. Therefore, it opens up new avenues to the development of robust clusters-based sensing platforms.

The paper deals with the application of size exclusion chromatography (SEC) for the studies of paper degradation phenomena. The goal is to solve some of the technical problems connected with the calibration of multi-detector SEC system and to find the correlation between SEC and viscometric results of degree of polymerization of cellulose. The results gathered for the paper samples degraded by acidic air pollutant (NO(2)) are used as an example of SEC-MALLS application. From the correlation between intrinsic viscosities and absolute value of molecular masses obtained with SEC/MALLS (Multi Angle Laser Light Scattering) technique, Mark-Houwink coefficients for cellulose in cupri-ethylenediamine solution were determined. Thus obtained coefficients were used for the determination of viscometric degree of polymerization (molecular mass) of the aged samples. An excellent correlation was found between the chromatographic values of molecular masses obtained with SEC-UV/VIS detection and the viscometric ones utilizing the improved values of Mark-Houwink coefficients., (Copyright © 2010 Elsevier B.V. All rights reserved.)

A novel, highly selective and sensitive paper-based colorimetric sensor for trace determination of copper (Cu(2+)) ions was developed. The measurement is based on the catalytic etching of silver nanoplates (AgNPls) by thiosulfate (S2O3(2-)). Upon the addition of Cu(2+) to the ammonium buffer at pH 11, the absorption peak intensity of AuNPls/S2O3(2-) at 522 nm decreased and the pinkish violet AuNPls became clear in color as visible to the naked eye. This assay provides highly sensitive and selective detection of Cu(2+) over other metal ions (K(+), Cr(3+), Cd(2+), Zn(2+), As(3+), Mn(2+), Co(2+), Pb(2+), Al(3+), Ni(2+), Fe(3+), Mg(2+), Hg(2+) and Bi(3+)). A paper-based colorimetric sensor was then developed for the simple and rapid determination of Cu(2+) using the catalytic etching of AgNPls. Under optimized conditions, the modified AgNPls coated at the test zone of the devices immediately changes in color in the presence of Cu(2+). The limit of detection (LOD) was found to be 1.0 ng mL(-1) by visual detection. For semi-quantitative measurement with image processing, the method detected Cu(2+) in the range of 0.5-200 ng mL(-1)(R(2)=0.9974) with an LOD of 0.3 ng mL(-1). The proposed method was successfully applied to detect Cu(2+) in the wide range of real samples including water, food, and blood. The results were in good agreement according to a paired t-test with results from inductively coupled plasma-optical emission spectrometry (ICP-OES)., (Copyright © 2015. Published by Elsevier B.V.)

In the current strategy, a highly sensitive and fast one-step colorimetric assay for trace determination of Cu2+ in water is presented. The planned assay was based upon the use of varnish polish-modified filter paper printed with 2-[5-(2-hydroxy-5-sulfophenyl)-3-phenyl-1-formazyl] benzoic acid monosodium salt, commercially named zincon. Under optimal conditions, the designed assay readily recognised the formation of blue–purple-coloured Cu–ZI chelate in less than 10 min. The proposed probe was able to detect Cu2+ in the concentration range from 0.04 to 10 μg/mL (6.34 × 10−1 to 1.59 × 103µM), with low limit of detection (LOD) of 0.01 μg/mL (1.59 × 10−1 µM). The LOD was 10-fold lower than the allowable level for Cu2+ in drinking water set by WHO legislation. The assay was applied for Cu2+determination in water with acceptable recoveries (89.6–102.1%) and precision (<3%). Therefore, the proposed sensing assay might be considered as a potential rapid and low-cost candidate for total determination and speciation of Cu2+in water samples. [ABSTRACT FROM AUTHOR]

Cu nanoparticles (CuNPs) were successfully synthesized in situ on ZnO whiskers as a selective scaffold, which were supported in a microstructured paper matrix composed of inorganic fibers; as-prepared paper composites were easy to handle in practical use and demonstrated excellent catalytic performance in the methanol reforming process for effective hydrogen production.