Search

Spillways of large and small dams experience flow conditions that exceed the capabilities of common water surface profile computer programs. Unique channel geometries, steep slopes, and streamline curvature demand rigorous mathematics, while phenomena associated with aerated flow and potential cavitation require special analyses, especially for stepped chutes. SpillwayPro is a generalized, energy-based, water surface profile calculation tool for both smooth and stepped chutes that integrates cavitation analysis and aerated flow effects, with separate modules supporting aerator design and the development of optimized structure profiles that meet cavitation parameter objectives. Simultaneous calculation of smooth and stepped-chute flow profiles enables the rapid assessment of the energy dissipation benefits of steps, as well as their unique aerated flow and cavitation issues. SpillwayPro's technical basis is presented, and its results are compared to the data from prototype case studies and empirical methods developed from large-scale laboratory studies. SpillwayPro's fundamental energy-based methods are useful for cases that differ from idealized empirical approaches and would benefit from a more rapid analysis than can be accomplished with physical or computational fluid dynamics (CFD) modeling. [ABSTRACT FROM AUTHOR]

Optical flow estimation is known from Computer Vision where it is used to determine obstacle movements through a sequence of images following an assumption of brightness conservation. This paper presents the first study on application of the optical flow method to aerated stepped spillway flows. For this purpose, the flow is captured with a high-speed camera and illuminated with a synchronized LED light source. The flow velocities, obtained using a basic Horn-Schunck method for estimation of the optical flow coupled with an image pyramid multi-resolution approach for image filtering, compare well with data from intrusive conductivity probe measurements. Application of the Horn-Schunck method yields densely populated flow field data sets with velocity information for every pixel. It is found that the image pyramid approach has the most significant effect on the accuracy compared to other image processing techniques. However, the final results show some dependency on the pixel intensity distribution, with better accuracy found for grey values between 100 and 150. [ABSTRACT FROM AUTHOR]

• In a two-phase breaking bore roller, air entrainment takes place in the form of air entrapment at the roller toe, air-water exchange across the roller 'free-surface', spray and splashing with dynamic water drop ejection and reattachment, roll up and roll down of water 'tongues' engulfing air pockets. • All experimental measurements indicated a relatively short and thin air-water flow region. The number of air bubbles within the roller was limited, chord lengths spanned over several orders of magnitude, with increasing chord size with increasing vertical elevation within the roller. • Large proportion of clustered bubbles were observed and the clustering characteristics were similar to those in stationary hydraulic jumps. • Results could serve as a validation frame for computational fluid dynamics (CFD) modelling, as the modelling of air-water interactions in breaking rollers of hydraulic jumps and tidal bores remain a huge challenge for numerical modeller. A tidal bore is an unsteady rapidly-varied open channel flow characterised by a rise in water surface elevation in estuarine zones, under spring tidal conditions. After formation, the bore is traditionally analysed as a hydraulic jump in translation and its leading edge is characterised by a breaking roller for Froude number Fr 1 > 1.3–1.5. The roller is a key flow feature characterised by intense turbulence and air bubble entrainment. Detailed unsteady air-water flow measurements were conducted in a breaking bore propagating in a large-size channel, using an array of three dual-tip phase detection probes and photographic camera. The data showed a relatively steep roller, with a short and dynamic bubbly flow region. Air entrainment took place in the form of air entrapment at the roller toe, air-water exchange across the roller 'free-surface', spray and splashing with dynamic water drop ejection and re-attachment, roll up and roll down of water 'tongues' engulfing air pockets. The roller free-surface profile and characteristics were comparable to observations in stationary hydraulic jumps and steady breaker, for similar flow conditions. Within the roller, the amount of entrained air was quantitatively small for Froude number Fr 1 = 2.2. The number of air bubbles was limited, with between 5 and 20 bubbles per phase-detection probe sensor detected at each vertical elevation. The entrained air bubble chord lengths spanned over several orders of magnitude, with a large proportion of clustered bubbles. Overall, the study highlighted the three-dimensional nature of the air-water roller motion and strong evidence of the in-homogeneity of the turbulent air-water mixture. [ABSTRACT FROM AUTHOR]