Search

Solar interfacial evaporation is an effective and sustainable strategy to solve the shortage of fresh water. Nowadays, fully converting the near-infrared light with significant thermal effect, and reducing the energy loss in evaporation stage are the key factors to achieve higher evaporation rate. Herein, the nano cesium tungsten bronze (Cs 0.32 WO 3) with exceptional near-infrared absorption property was loaded on reduced graphene oxide-carbon nanotubes (rGO-CNTs) composite aerogel, drastically enhancing the evaporation efficiency from 61.0% to 85.9%, which can be explained by the remarkable synergistic effect between rGO-CNTs and nano Cs 0.32 WO 3 in improving the photothermal conversion performance. As a result, the solar evaporators assembled by the fabricated rGO-CNTs-Cs 0.32 WO 3 aerogels and corn straw grooves achieved an evaporation rate of 1.93 kg m−2 h−1, exceeding the previously-investigated carbon aerogels/foams, natural plants and tungsten-based compound systems. The characterization results reveal that the loading of nano Cs 0.32 WO 3 contributes to the partial restoration of π-conjugated structure in rGC, increasing solar absorption and the corresponding thermal energy released by the lattice vibration. Meanwhile, the oxygen vacancies and carrier density of Cs 0.32 WO 3 nanoparticles increase after compositing with rGC, which further enhances the local surface plasma resonances (LSPR) effect. Significantly, the hydrophilic functional groups and excellent wettability of composite aerogel and corn straw play crucial effect in accelerating water transport, activating water molecules and reducing evaporation energy consumption. In a word, the unique construction of rGO-CNTs-Cs 0.32 WO 3 aerogels presents a novel approach for the design of solar-driven freshwater production system, the application expansion of nano tungsten bronze and carbon aerogels. [Display omitted] • Novel carbon-supported nano cesium tungsten bronze aerogels are successfully fabricated and achieve higher evaporation efficiency of 85.9%. • rGO-CNTs-Cs 0.32 WO 3 porous aerogels exhibit higher NIR absorption performance of 97.2% and evaporation rate of 1.93 kg m−2h−1. • The synergy between rGO-CNTs and nano Cs 0.32 WO 3 significantly enhances the photothermal conversion performance of composite aerogel. • Abundant hydrophilic groups and excellent wettability of carbon aerogel and corn straw are beneficial for reducing the energy consumption of evaporation. [ABSTRACT FROM AUTHOR]

The solar thermoelectric (STE) generator is constituted by a high-thermopower thermocell and a NIR selective Cs 0.32 WO 3 -based photothermal membrane, which can provide a significant all-weather thermoelectric generation. This work demonstrates a novel strategy for STE devices with high solar-thermoelectric conversion, durability, adaptability, and low-cost, which provide an alternative resolution in terms of a continuous power supply of wearable electronics. [Display omitted] • A wearable solar thermoelectric generator with all-weather power output is prepared. • Selective NIR absorption of Cs 0.32 WO 3 benefits colouring and photothermal conversion. • Heat concentration of photothermal membrane promotes enhanced temperature gradient. • This work delivers a resolution of continuous power supply for wearable electronics. Harvesting heat or solar energy to directly generate affordable and sustainable electricity holds great promise toward both fundamental science and practical applications in self-powered wearable electronics. However, solar thermoelectric (STE) devices remain challenging in establishing a stable and significant temperature gradient (Δ T) across thermoelectric materials for cost-effective electricity generation. Herein, a wearable STE generator with all-weather and high-performance electricity generation was elaborately designed and synthesized sandwiched by a thermogalvanic cell and a large-area nanofiber membrane of Cs 0.32 WO 3 (CWO) nanoparticles with strong near-infrared (NIR) absorption. These prepared CWO membranes, which were prepared via an electrostatic spinning technique, present a high photothermal conversion efficiency of 42.7 % with no degradation after running for 10 cycles. Notably, a significant Δ T of 31.5 K across the thermoelectric modular was achieved for STE generation via the thermal concentration of these photothermal membranes under natural sunlight. Owing to the high thermopower of 2.87 mV K−1 for each p-n pair, STE generation demonstrates a maximum output voltage of 200 mV under natural solar irradiance during the time period of noon. This work explores a new strategy to achieve efficient heat management of STE devices for high electricity generation under all-weather conditions, which demonstrates great potential for self-powered wearable electronics. [ABSTRACT FROM AUTHOR]