Search

As a typical application of geodesy, the GNSS/INS (Global Navigation Satellite System and Inertial Navigation System) integrated navigation technique was developed and has been applied for decades. For the integrated systems with multiple sensors, data fusion is one of the key problems. As a well-known data fusion algorithm, the Kalman filter can provide optimal estimates with known parameters of the models and noises. In the literature, however, the data fusion algorithm of the GNSS/INS integrated navigation and positioning systems is performed under a certain norm, and performance of the conventional filtering algorithms are improved only under this fixed and limited frame. The mixed norm-based data fusion algorithm is rarely discussed. In this paper, a mixed norm-based data fusion algorithm is proposed, and the hypothesis test statistics are constructed and adopted based on the chi-square distribution. Using the land vehicle data collected through the multi-GNSS and the IMU (Inertial Measurement Unit), the proposed algorithm is tested and compared with the conventional filtering algorithms. Results show that the influences of the outlying measurements and the uncertain noises are weakened with the proposed data fusion algorithm, and the precision of the estimates is further improved. Meanwhile, the proposed algorithm provides an open issue for geodetic applications with mixed norms. [ABSTRACT FROM AUTHOR]

Aiming at abrupt faults in GNSS/INS integrated systems in complex environments, classical fault detection algorithms are mostly developed from the measurement domain. A robust chi-square test method based on the state domain is proposed in this paper. The fault detection statistic is built based on the difference between the prior state estimation and the posterior state estimation in Kalman filtering. To improve the calculation stability, singular value decomposition (SVD) is used to factor the covariance matrix of the difference. The relevant formulas of the proposed method were theoretically derived, and the relationship between the proposed method and the existing innovation chi-square test method was revealed. The proposed method was compared with state-of-the-art chi-square test methods and verified by GNSS/INS integrated navigation experiments using simulation data and real data. The experimental results show that the proposed method (a) directly works in the state domain, (b) does not require the known real system state, (c) has computational efficiency and good robustness, and (d) accurately detects abrupt faults. [ABSTRACT FROM AUTHOR]

Low-cost GPS/INS integration system is the ideal combination of navigation and positioning. However, the sensitivity of low-cost INS is not good enough for the initial alignment in statics base before navigation. Considering this problem, this paper presents an arbitrary misalignment angle error propagation model which does not rely on small misalignment angles assumption and two simplified versions. These models are presented in the ECEF frame approach and are suitable to implement the in-motion alignment with GPS aided. Another three error models based on quaternion, Rodrigues parameters and modified Rodrigues parameters were also proposed. Three experiments were designed to verify the accuracy and computational efficiency of these error models. The experiments' results showed that the small misalignment angle model was applicable to the small misalignment angle for higher computational efficiency but without improvement of accuracy. And the large misalignment angle is the best error model for the initial alignment of the arbitrary misalignment angle. [ABSTRACT FROM AUTHOR]

The estimation of ambiguity in the global navigation satellite system/inertial navigation system (GNSS/INS) tightly coupled system is a key issue for GNSS/INS precise navigation positioning. Only when the ambiguity is solved correctly can the integrated navigation system obtain high-precision positioning results. Aiming at the problem of ambiguity parameter estimation in GNSS/INS tightly coupled system, a new strategy for ambiguity parameter estimation and elimination is proposed in this paper. Here, the ambiguity parameter is first added to the state equations of GNSS/INS in the estimation process. Then, the strategy of eliminating the parameter is used to improve efficiency. A residual test is carried out based on introducing the ambiguity parameter, thereby reducing or avoiding its influence on the filtering estimation process. Two groups of experiments were carried out and compared with GNSS positioning results. The results showed that, in the open sky observation environment, the positioning accuracy of the GNSS/INS tightly coupled method proposed in this paper was within 5 cm, and the ambiguity fixed rate was more than 97%, which is basically consistent. In a GNSS-denied environment, the positioning accuracy of the GNSS/INS tightly coupled method proposed in this paper was obviously better than that of GNSS, and the positioning accuracy in X, Y, and Z directions was improved by 82.46%, 78.87%, and 79.67%, respectively. The fixed rate of ambiguity increased from 73% to 78.57%. Therefore, in a GNSS-challenged environment, the novel strategy of the GNSS/INS tightly coupled system has higher ambiguity fixed rate and significantly improves positioning accuracy and continuity. [ABSTRACT FROM AUTHOR]