Search

• A novel ionic liquid of [Bmim]Bph 4 was used as co-extractant for extraction of Li+. • The single-stage Li/Mg separation factor was higher than 2500. • Li 2 CO 3 was obtained and the process flow was reduced with Na 2 CO 3 as stripping agent. • The binding capacity of TBP to metal ion followed the sequence Li+ ≫ Na+ > K+ ≈ Mg2+. • The whole extraction process with novel extraction system was green and efficient. A novel ionic liquid named 1-butyl-3-methylimidazolium tetraphenylboron ([Bmim]Bph 4) containing a stereo symmetric structure of Bph 4 - was synthesized and used as co-extractants with TBP and CH 2 BrCl as extractant and diluent for selective extraction of lithium ions from salt lake brines with high molar ratio of magnesium to lithium. The effects of extraction conditions containing molar ratio of co-extractant to lithium ion, volume percentage of TBP and O/A phase ratio on extraction performance were investigated. Under the optimal extraction conditions, the maximum separation factor of lithium to magnesium reached up to 2754 after one single-stage extraction process. After four stages of counter-current extraction process, the extraction efficiency of Li+ reached up to 99.47%. Then the washing and stripping conditions were optimized with the combination of LiCl and NaCl solution as the washing agent and Na 2 CO 3 solution as the stripping agent. After that, 10 cycles of the whole extraction experiments were carried out and the organic phase exhibited excellent reusability and stability. Since no acid and alkaline were used throughout the extraction process, the novel extraction process is greener and more environmentally friendly than the traditional solvent extraction process. [ABSTRACT FROM AUTHOR]

The novel heteropolyacid ionic liquid 1-methylimidazolium silicotungstate ([Mmim] 4 SiW 12 O 40) was synthesized using a one-step method and subsequently characterized. This compound was then employed as a co-extractant for the removal of lithium from salt lake brine having a high Mg/Li molar ratio, in conjunction with tributyl phosphate (TBP) and γ-heptanolide as the extractant and diluent, respectively. The optimal extraction conditions gave a single-stage lithium ion extraction efficiency of approximately 60 %. More environmentally friendly and efficient processes were also developed. In one approach, a portion of the aqueous phase containing only HCl and LiCl after stripping was used for washing along with an aqueous HCl solution as the stripping agent and Mg(OH) 2 for regeneration. In the alternative method, NaCl and LiCl were used as washing agents while Na 2 CO 3 was employed for stripping and regeneration, reducing the time required without the need for strong acids or bases. This system showed good extraction efficiency stability over 10 consecutive cycles. The mechanism of this process was explored using Fourier transform infrared spectroscopy and 31P nuclear magnetic resonance spectroscopy and the binding capacity of TBP for the metals was found to decrease in the order of Li+ > Na+ > Mg2+ > K+. • The proposed heteropolyacid ionic liquid was synthesized by one-step method. • The single-stage extraction efficiency of lithium ion was approximately 60 %. • The proposed extraction system showed high selectivities for Mg2+, Na+ and K+. • Na 2 CO 3 was used as stripping agent for shorting the process flow. • The proposed extraction system showed good reusability and stability. [ABSTRACT FROM AUTHOR]