Search

A promising direction in barrel ballistics aimed at increasing the muzzle velocity of a projectile is the use of new propellants as an attached charge. This paper presents an experimental and theoretical method for determining the law of propellant combustion in a manometric experiment (in a closed volume). Within the framework of this method, a small number of experiments could be sufficient to determine a change in the law of combustion during the propellant burnout and depending on pressure. This method is demonstrated on the example of processing three experiments with model high-density propellant. The laws of combustion of high-density propellants, obtained in this study, can later be used to calculate the gas-dynamic parameters of a shot from a barrel system or a nozzle bomb (in a semi-closed volume) using these propellants. [ABSTRACT FROM AUTHOR]

The combustion of a model high-density propellant (MHP) under the conditions of a closed volume has been investigated. A description is given of the main components and mechanisms of the manometric bomb being used. Procedures are described for determining the laws of propellant combustion in a manometric experiment, and a comparison is made of computational-experimental data. The distinctive features of the formation of an MHP combustion surface in various containers have been identified and described. The dependences of the layer combustion velocity of two model high-density propellants on pressure have been determined. [ABSTRACT FROM AUTHOR]

An experimental and theoretical study of the combustion of granulated charges consisting of pyroxylin powders in a manometric bomb of constant volume is presented. A comparison was made of the experimentally measured dependence of pressure increase in a manometric bomb with calculations according to thermodynamic model of combustion of a gunpowder sample in a manometric bomb using the empirical law of the dependence of the burning rate on pressure and a conjugate model of unsteady combustion of gunpowder. The unsteady rate of burning of pyroxylin powder, due to the high rate of pressure growth in the manometric bomb, differs from the quasi-stationary speed. This difference depends on the rate of pressure growth and on its absolute value and decreases with increasing pressure. [ABSTRACT FROM AUTHOR]

Results have been presented of intraballistic design work aimed at identifying the main characteristics of a small caliber laboratory launcher and the composition of the propellant charge for various striker masses. Technical solutions have been obtained for sabots of supercavitating strikers accelerated in a small size laboratory ballistic installation. The level of the pressure acting on the striker, as it enters the water directly from the barrel of the installation, has been determined. Travel path ranges have been calculated for supercavitating strikers accelerated in a small size laboratory ballistic installation. [ABSTRACT FROM AUTHOR]

The interaction of supercavitating strikers with obstacles placed in water was investigated in a wide range of intersection angles. Several options of the interaction of strikers with obstacles are considered, including through puncturing, destruction of the striker, and ricochet. Estimation was made of the magnitude of the decrease in the speed of strikers in the cases of through puncturing and ricochet. [ABSTRACT FROM AUTHOR]

A mathematical model has been constructed for the behavior of a tungsten carbide alloy on the basis of TC8 (tungsten carbide, 92%; cobalt, 8%) and WNFC (W–Ni–Fe–Co), or TNIC (tungsten, nickel, iron, and cobalt), in conditions of shock-wave loading. A scheme has been suggested for the process of mass loss and self-sharpening of the striker in dynamic interaction with the target. The computational-experimental method has been used to investigate the capacity of cylindrical strikers made of this composite to penetrate into a steel target at an impact velocity of 1260 m/s with account for the dependence of yield stress on the intensity of plastic deformation considering both the stage of strengthening and the stage of its structural softening in the process of deformation. [ABSTRACT FROM AUTHOR]

Results are presented of an experimental-theoretical investigation of the motion in water of supercavitating strikers made of steel and aluminum and tungsten (TNI, i.e., tungsten, nickel, and iron) alloys in a broad velocity range. Estimates have been made of the ranges of velocities of entry into water in which the investigated supercavitating strikers from various materials are not destroyed and preserve the original shape. Experimental and computational data have been obtained on the value of deviation of the trajectories of two simultaneously starting from each other supercavitating strikers at the initial stage of their group motion in water depending on the materials they are made of. [ABSTRACT FROM AUTHOR]

Analysis has been made of the ballistic characteristics of the shots, and a powder grade has been indentified for a propellant powder charge ensuring the lowest level of force action on the projectile assembly including a group of supercavitating strikers in a gun-start. [ABSTRACT FROM AUTHOR]

On the basis of an experimental and theoretical approach, the authors have considered an algorithm for modeling the behavior of advanced propellants in barreled systems of varying caliber. The proposed algorithm makes it possible to conduct preliminary investigations into the possibility of using advanced fast-burning propellants in the existing barreled systems and in advanced systems of varying calibers and for various purposes. A possible increment in the muzzle velocity of a projectile due to the advanced propellants added to the propellant powder charge is assessed without full-scale testing. [ABSTRACT FROM AUTHOR]

A mathematical model of a shot from a smoothbore ballistic installation for a gun start of a group of supercavitating strikers has been developed. To verify the mathematical model, experimental investigations into high-velocity launching of a group of bodies on a hydroballistic testing facility have been conducted. A comprehensive parametric investigation has been conducted to determine conditions for loading the ballistic installation to achieve the required muzzle velocity, ensuring a supercavitating regime of motion for a group of strikers in water. [ABSTRACT FROM AUTHOR]