Search

As an emerging technology to convert environmental high‐entropy energy into electrical energy, triboelectric nanogenerator (TENG) has great demands for further enhancing the service lifetime and output performance in practical applications. Here, an ultra‐robust and high‐performance rotational triboelectric nanogenerator (R‐TENG) by bearing charge pumping is proposed. The R‐TENG composes of a pumping TENG (P‐TENG), an output TENG (O‐TENG), a voltage‐multiplying circuit (VMC), and a buffer capacitor. The P‐TENG is designed with freestanding mode based on a rolling ball bearing, which can also act as the rotating mechanical energy harvester. The output low charge from the P‐TENG is accumulated and pumped to the non‐contact O‐TENG, which can simultaneously realize ultralow mechanical wear and high output performance. The matched instantaneous power of R‐TENG is increased by 32 times under 300 r/min. Furthermore, the transferring charge of R‐TENG can remain 95% during 15 days (6.4 × 106 cycles) continuous operation. This work presents a realizable method to further enhance the durability of TENG, which would facilitate the practical applications of high‐performance TENG in harvesting distributed ambient micro mechanical energy. [ABSTRACT FROM AUTHOR]

[Display omitted] • H-SiO 2 and PF as fillers to improve the dielectric properties of PFS films. • The performance of TENGs delivered an enhancement by 13 times. • Multiple nanoscales is more favorable to achieve high performance of TENGs. Triboelectric nanogenerators (TENGs), capable of harvesting distributed energy from the environment, have provided a viable solution for self-powered wearable electronics. However, their low power density and susceptibility to contamination still severely limit their practical application. Herein, we reported a "two-step" strategy to implement a waterproof self-powered wearable electronic device based on TENG. Firstly, Perfluoropolyether (PF) and hollow hierarchical silica (H-SiO 2) as fillers significantly improve the dielectric properties of polydimethylsiloxane (PDMS) composite films (PFS films) through polarization effect. Then the nano bumps of 10–30 nm are created on the surface of the films by surface etching, the bumps can increase the contact area of TENG. The voltage of TENG is improved from ∼ 67 V to ∼ 910 V and the current is improved from ∼ 1 μA to ∼ 25 μA. What's more, the investigation of the surface structure of the PFS composite films by Atomic Force Microscope (AFM) revealed that the synergistic combination of multiple nanoscales (10–30 nm, 60–80 nm, 300–500 nm) is more favorable to achieve high performance of TENG. The surface structure composed of multiple nanoscales endows PFS with excellent superhydrophobicity. The PFS films remained fine performance after 40,000 drops of water and 90 days. This work achieves high performance and water resistance of TENG, demonstrating great potential in the field of self-powered wearable electronic devices. [ABSTRACT FROM AUTHOR]

Based on the coupling effect of contact electrification and electrostatic induction, the triboelectric nanogenerator (TENG) as an emerging energy technology can effectively harvest mechanical energy from the ambient environment. However, due to its inherent property of large impedance, the TENG shows high voltage, low current and limited output power, which cannot satisfy the stable power supply requirements of conventional electronics. As the interface unit between the TENG and load devices, the power management circuit can perform significant functions of voltage and impedance conversion for efficient energy supply and storage. Here, a review of the recent progress of switching power management for TENGs is introduced. Firstly, the fundamentals of the TENG are briefly introduced. Secondly, according to the switch types, the existing power management methods are summarized and divided into four categories: travel switch, voltage trigger switch, transistor switch of discrete components and integrated circuit switch. The switch structure and power management principle of each type are reviewed in detail. Finally, the advantages and drawbacks of various switching power management circuits for TENGs are systematically summarized, and the challenges and development of further research are prospected. [ABSTRACT FROM AUTHOR]

The wearable tactile sensors have attracted great attention in the fields of intelligent robots, healthcare monitors and human-machine interactions. To create active tactile sensors that can directly generate electrical signals in response to stimuli from the surrounding environment is of great significance. Triboelectric nanogenerators (TENGs) have the advantages of high sensitivity, fast response speed and low cost that can convert any type of mechanical motion in the surrounding environment into electrical signals, which provides an effective strategy to design the self-powered active tactile sensors. Here, an overview of the development in TENGs as tactile stimulators for multifunctional sensing and artificial synapses is systematically introduced. Firstly, the applications of TENGs as tactile stimulators in pressure, temperature, proximity sensing, and object recognition are introduced in detail. Then, the research progress of TENGs as tactile stimulators for artificial synapses is emphatically introduced, which is mainly reflected in the electrolyte-gate synaptic transistors, optoelectronic synaptic transistors, floating-gate synaptic transistors, reduced graphene oxides-based artificial synapse, and integrated circuit-based artificial synapse and nervous systems. Finally, the challenges of TENGs as tactile stimulators for multifunctional sensing and artificial synapses in practical applications are summarized, and the future development prospects are expected. [ABSTRACT FROM AUTHOR]