Search

Data truncation is a common problem in computed tomography (CT). Truncation causes cupping artifacts inside the field-of-view (FOV) and anatomical structures missing outside the FOV. Deep learning has achieved impressive results in CT reconstruction from limited data. However, its robustness is still a concern for clinical applications. Although the image quality of learning-based compensation schemes may be inadequate for clinical diagnosis, they can provide prior information for more accurate extrapolation than conventional heuristic extrapolation methods. With extrapolated projection, a conventional image reconstruction algorithm can be applied to obtain a final reconstruction. In this work, a general plug-and-play (PnP) method for truncation correction is proposed based on this idea, where various deep learning methods and conventional reconstruction algorithms can be plugged in. Such a PnP method integrates data consistency for measured data and learned prior image information for truncated data. This shows to have better robustness and interpretability than deep learning only. To demonstrate the efficacy of the proposed PnP method, two state-of-the-art deep learning methods, FBPConvNet and Pix2pixGAN, are investigated for truncation correction in cone-beam CT in noise-free and noisy cases. Their robustness is evaluated by showing false negative and false positive lesion cases. With our proposed PnP method, false lesion structures are corrected for both deep learning methods. For FBPConvNet, the root-mean-square error (RMSE) inside the FOV can be improved from 92HU to around 30HU by PnP in the noisy case. Pix2pixGAN solely achieves better image quality than FBPConvNet solely for truncation correction in general. PnP further improves the RMSE inside the FOV from 42HU to around 27HU for Pix2pixGAN. The efficacy of PnP is also demonstrated on real clinical head data. [ABSTRACT FROM AUTHOR]

A single-scan dual-energy low-dose cone-beam CT (CBCT) imaging technique that exploits a multi-slit filter is proposed in this paper. The multi-slit filter installed between the x-ray source and the scanned object is reciprocated during a scan. The x-ray beams through the slits would generate relatively low-energy x-ray projection data, while the filtered beams would make high-energy projection data. An iterative image reconstruction algorithm that uses an adaptive-steepest-descent method to minimize image total-variation under the constraint of data fidelity was applied to reconstructing the image from the low-energy projection data. Since the high-energy projection data suffer from a substantially high noise level due to the beam filtration, we have developed a new algorithm that exploits the joint sparsity between the low- and high-energy CT images for image reconstruction of the high-energy CT image. The proposed image reconstruction algorithm uses a gradient magnitude image (GMI) of the low-energy CT image by regularizing the difference of GMIs of the low- and high-energy CT images to be minimized. The feasibility of the proposed technique has been demonstrated by the use of various phantoms in the experimental CBCT setup. Furthermore, based on the proposed dual-energy imaging, a material differentiation was performed and its potential utility has been shown. The proposed imaging technique produced promising results for its potential application to a low-dose single-scan dual-energy CBCT. [ABSTRACT FROM PUBLISHER]