Search

In this study, the integration of paper industry waste with high cellulose content into biocomposites of polylactic acid (PLA), a widely used biobased polymer material, was investigated. The PLA/waste biocomposite samples (0–25 wt.%) were manufactured using the extrusion and injection moulding techniques. The mechanical test results showed improvements in terms of tensile properties and a decrease in impact strength as the percentage of residue increased. The melting temperature decreased, and the crystallinity increased in all biocomposites according to the Differential Scanning Calorimetry (DSC) analysis. Water absorption increased proportionally with the percentage of residue, attributed to the higher cellulose content in the biocomposites, determined by Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques. The scanning electron microscopy (SEM) fracture analysis demonstrated effective reinforcement–matrix cohesion, supporting the previously observed behaviour of the analysed materials. This work highlights the potential of using waste from the paper industry as reinforcement in PLA matrices, opening new perspectives for sustainable applications in the framework of the manufacture of composite materials. [ABSTRACT FROM AUTHOR]

In this study, the integration of paper industry waste with high cellulose content into biocomposites of polylactic acid (PLA), a widely used biobased polymer material, was investigated. The PLA/waste biocomposite samples (0–25 wt.%) were manufactured using the extrusion and injection moulding techniques. The mechanical test results showed improvements in terms of tensile properties and a decrease in impact strength as the percentage of residue increased. The melting temperature decreased, and the crystallinity increased in all biocomposites according to the Differential Scanning Calorimetry (DSC) analysis. Water absorption increased proportionally with the percentage of residue, attributed to the higher cellulose content in the biocomposites, determined by Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques. The scanning electron microscopy (SEM) fracture analysis demonstrated effective reinforcement–matrix cohesion, supporting the previously observed behaviour of the analysed materials. This work highlights the potential of using waste from the paper industry as reinforcement in PLA matrices, opening new perspectives for sustainable applications in the framework of the manufacture of composite materials.

Since the last two decades, the use of natural fiber reinforced polymer composites has garnered significant application considerations over the synthetic fiber reinforced composites due to their numerous advantages and unique properties. Likewise, epoxy resin has attracted the interest of many researchers for composite synthesis, basically because of its chemical stability, thermal and mechanical characteristics. Hence, the primary aim of this study was to investigate the influence of dombeya fiber and paper particulate on the physical and mechanical properties of dombeya fiber and paper particulate-reinforced polymer composites for structural applications. Dombeya fiber and paper particles are renewable and biodegradable materials, thereby making them environmentally friendly materials to replace synthetic materials. Hand lay-up technique was utilized to fabricate the hybrid-reinforced biocomposites after which they were subjected to mechanical, wear, density, and moisture absorption properties. The surface morphology of the fractured surface was also analyzed to investigate its microstructural features. It was discovered from the results that hybrid biocomposites demonstrated improved properties over the unreinforced composite, with composites from 9-wt% dombeya fiber-paper particles reinforced biocomposite exhibiting the most suitable properties with commensurate density with the unreinforced epoxy matrix. These obtained characteristics support the material as a suitable material for biomedical apparatus application such as orthopedic implants, surgical instruments, and bone fixation devices.

The effect of the chemical treatment of paper mill sludge fibers and polypropylene molecular weight were studied relative to the physical, mechanical, and morphological properties of a novel cellulosic biocomposite. Paper mill sludge fibers were treated with acetic anhydride, and succinic anhydride was mixed with maleic anhydride polypropylene (MAPP) and coupling agent (0 and 3%). The ratio of fibers and polymer materials was considered 30 to 70, which was manufactured by the hot-pressing method at 180 °C. Water absorption, volume swelling, and contact angle were examined on each specimen according to ASTM standards, while Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) explored the efficiency of chemical modification of fibers and the morphology of biocomposites, respectively. The results showed that chemical treatment of fibers reduced the water absorption and volumetric swelling. Both tensile and flexural strength were increased with chemical treatment using the coupling agent. Comparison of fibers treated with succinic acid and acetic acid showed that the succinic acid enhanced the mechanical properties better than the acetic acid treatment. Finally, FTIR analysis showed that the hydroxyl groups decreased, and SEM images indicated the interface between fibers and polypropylene improved via chemical treatment of sludge fibers.

The development of new materials is currently focused on replacing fossil-based plastics with sustainable materials. Obtaining new bioplastics that are biodegradable and of the greenest possible origin could be a great alternative for the future. However, there are some limitations—such as price, physical properties, and mechanical properties—of these bioplastics. In this sense, the present work aims to explore the potential of lignin present in black liquor from paper pulp production as the main component of a new plastic matrix. For this purpose, we have studied the simple recovery of this lignin using acid precipitation, its thermoplastification with glycerin as a plasticizing agent, the production of blends with poly(caprolactone) (PCL), and finally the development of biocomposite materials reinforcing the blend of thermoplastic lignin and PCL with stone groundwood fibers (SGW). The results obtained show that thermoplastic lignin alone cannot be used as a bioplastic. However, its combination with PCL provided a tensile strength of, e.g., 5.24 MPa in the case of a 50 wt.% blend. In addition, when studying the properties of the composite materials, it was found that the tensile strength of a blend with 20 wt.% PCL increased from 1.7 to 11.2 MPa with 40 wt.% SGW. Finally, it was proven that through these biocomposites it is possible to obtain a correct fiber–blend interface. [ABSTRACT FROM AUTHOR]

Nanostructured materials are difficult to prepare rapidly and at large scale. Melt-processed polymer-clay nanocomposites are an exception, but the clay content is typically below 5 wt%. An approach for manufacturing of microfibrillated cellulose (MFC)/kaolinite nanocomposites is here demonstrated in pilot-scale by continuous production of hybrid nanopaper structures with thickness of around 100 μm. The colloidal nature of MFC suspensions disintegrated from chemical wood fiber pulp offers the possibility to add kaolinite clay platelet particles of nanoscale thickness. For initial lab scale optimization purposes, nanocomposite processing (dewatering, small particle retention etc) and characterization (mechanical properties, density etc) were investigated using a sheet former (Rapid Köthen). This was followed by a continuous fabrication of composite paper structures using a pilot-scale web former. Nanocomposite morphology was assessed by scanning electron microscopy (SEM). Mechanical properties were measured in uniaxial tension. The fire retardancy was evaluated by cone calorimetry. Inorganic hybrid composites with high content of in-plane oriented nanocellulose, nanoclay and wood fibers were successfully produced at pilot scale. Potential applications include fire retardant paperboard for semi structural applications and as reinforcement mats in molded thermoset biocomposites. [ABSTRACT FROM AUTHOR]

The effect of the chemical treatment of paper mill sludge fibers and polypropylene molecular weight were studied relative to the physical, mechanical, and morphological properties of a novel cellulosic biocomposite. Paper mill sludge fibers were treated with acetic anhydride, and succinic anhydride was mixed with maleic anhydride polypropylene (MAPP) and coupling agent (0 and 3%). The ratio of fibers and polymer materials was considered 30 to 70, which was manufactured by the hotpressing method at 180 °C. Water absorption, volume swelling, and contact angle were examined on each specimen according to ASTM standards, while Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) explored the efficiency of chemical modification of fibers and the morphology of biocomposites, respectively. The results showed that chemical treatment of fibers reduced the water absorption and volumetric swelling. Both tensile and flexural strength were increased with chemical treatment using the coupling agent. Comparison of fibers treated with succinic acid and acetic acid showed that the succinic acid enhanced the mechanical properties better than the acetic acid treatment. Finally, FTIR analysis showed that the hydroxyl groups decreased, and SEM images indicated the interface between fibers and polypropylene improved via chemical treatment of sludge fibers. [ABSTRACT FROM AUTHOR]

The development of the paper industry has led to the discharge of a large amount of papermaking waste liquid containing lignosulfonate. These lignin black liquids cause a lot of pollution in nature, which runs counter to the current environmental protection strategy under the global goal. Through the development and use of lignosulfonate in papermaking waste liquid to increase the utilization of harmful substances in waste liquid, we aim to promote waste liquid treatment and reduce environmental pollution. This paper proposes a new strategy to synthesize novel glue-free biocomposites with high-performance interfacial compatibility from papermaking by-product sodium lignosulfonate/chitosan (L/C) and waste bamboo. This L/C bamboo biocomposite material has good mechanical properties and durability, low formaldehyde emissions, a high recovery rate, meets the requirements of wood-based panels, and reduces environmental pollution. This method is low in cost, has the potential for large-scale production, and can effectively reduce the environmental pollution of the paper industry, promoting the recycling of biomass and helping the future manufacture of glue-free panels, which can be widely used in the preparation of bookcase, furniture, floor and so on. [ABSTRACT FROM AUTHOR]

Biomass–fungi biocomposite materials are derived from sustainable sources and can biodegrade at the end of their service. They can be used to manufacture products that are traditionally made from petroleum-based plastics. There are potential applications for these products in the packaging, furniture, and construction industries. In the biomass–fungi biocomposite materials, the biomass particles (made from agricultural waste such as hemp hurd) act as the substrate, and a network of fungal hyphae grow through and bind the biomass particles together. Typically, molding-based methods are used to manufacture products using these biocomposite materials. Recently, the authors reported a novel extrusion-based 3D printing method using these biocomposite materials. This paper reports a follow-up investigation into the effects of mixing parameters (mixing time and mixing mode) on fungal growth in biomass–fungi mixtures prepared for 3D printing and the effects of printing parameters (printing speed and extrusion pressure) on fungal growth in printed samples. The fungal growth was quantified using the number of fungal colonies that grew from samples. The results show that, when mixing time increased from 15 to 120 s, there was a 52% increase in fungal growth. Changing from continuous to intermittent mixing mode resulted in an 11% increase in fungal growth. Compared to mixtures that were not subjected to printing, samples printed with a high printing speed and high extrusion pressure had a 14.6% reduction in fungal growth, while those with a low printing speed and low extrusion pressure resulted in a 16.5% reduction in fungal growth. [ABSTRACT FROM AUTHOR]

The effect of fiber surface modification by superheated steam (SHS) treatment and fiber content (30 to 50 wt.%) was evaluated relative to the mechanical, morphology, thermal, and water absorption properties of oil palm mesocarp fiber (OPMF)/polypropylene (PP) biocomposites. SHS treatment of OPMF was conducted between 190 and 230 °C for 1 h, then the SHS-treated fiber was subjected to melt-blending with PP for biocomposite production. The biocomposite prepared from SHS-OPMF treated at 210 °C with 30 wt.% fiber loading resulted in SHS-OPMF/PP biocomposites with a tensile strength of 20.5 MPa, 25% higher than untreated-OPMF/PP biocomposites. A significant reduction of water absorption by 31% and an improved thermal stability by 8% at T5%degradation were also recorded. Scanning electron microscopy images of fractured SHS-OPMF/PP biocomposites exhibited less fiber pull-out, indicating that SHS treatment improved interfacial adhesion between fiber and PP. The results demonstrated SHS treatment is an effective surface modification method for biocomposite production. [ABSTRACT FROM AUTHOR]

In recent years, there has been considerable focus on ensuring that energy is used in the most efficient manner possible. This is due to the fact that globally, over 70% of energy is generated from fossil fuels. Consequently, the matter of designing and utilizing materials that will negate energy losses within the construction industry is of paramount importance. Simultaneously, the necessity for a sustainable approach to the design and production of materials is strongly emphasized. This paper presents an innovative approach to the use of a combination of mineral and plant-based fillers in polyurethane foam technology as a thermal insulation material with the potential to be used in construction to reduce energy consumption. Polyurethane composites containing fly ash from biomass combustion and the addition of rice, sunflower, and buckwheat husks as plant fillers were proposed. The structure of the obtained materials was studied, and the most important physical properties were analyzed. These included apparent density, dimensional stability, water absorption, and the effects of UV radiation and water influence on the carbon, hydrogen, nitrogen, and oxygen content. Moreover, the mechanical properties of the materials were investigated, including compressive strength and brittleness. Additionally, the foams were subjected to flammability tests using a cone calorimeter. Furthermore, additional parameters were determined, including the limiting oxygen index and the vertical and horizontal flammability tests. The results demonstrate the beneficial effects of combining mineral and vegetable fillers in polyurethane foam. [ABSTRACT FROM AUTHOR]

This paper delves into the development of biocomposite (BC) packaging material from tapioca starch (TS), flax seed gel (FS), and Siam weed (SW) extract, considering the increased demand for sustainable, eco-friendly packaging materials. The BCs—BC1 (40 mL), BC2 (80 mL), and BC3 (120 mL), prepared by varying the concentration of SW—were subjected to morphological, structure, thermal, and optical characterisations. The BC with a fragmented, agglomerated morphology shows cellulosic peaks in the X-ray diffraction pattern, indicating the C-type crystalline structure in TS. Thermogravimetric analysis confirmed the BC's safe use up to 300 °C, with a minimal 40% weight loss. Differential scanning calorimetry plots identified heat absorption during gelatinisation, with an endothermic peak at 300 °C marking a phase transition. The Fourier transform infrared (FTIR) and UV–visible spectra revealed functional groups that attribute antibacterial potential to the BC. The optical analyses show greater absorption and fewer emissions, resulting in the increased enthalpy responsible for the microbial activities. Antibacterial studies demonstrated BC2's efficacy against Staphylococcus aureus, while the stability against humidity and the minimal weight loss underscored the BC's robust thermal stability. FTIR spectra of post-heating at 80 °C confirmed the structural integrity, positioning the BC as a promising material for eco-friendly packaging solutions. [ABSTRACT FROM AUTHOR]

This paper presents a novel cheminformatics approach for the design and synthesis of hydroxyapatite/collagen nanocomposites, which have potential biomedical applications in tissue engineering, drug delivery, and orthopedic and dental implants. The nanocomposites are synthesized by the co-precipitation method with different ratios of hydroxyapatite and collagen. Their mechanical, biological, and degradation properties are analyzed using various experimental and computational techniques. Attenuated total reflection–Fourier-transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction unveil the low crystallinity and nanoscale particle size of hydroxyapatite (22.62 nm) and hydroxyapatite/collagen composites (14.81 nm). These findings are substantiated by scanning electron microscopy with energy-dispersive X-ray spectroscopy, confirming the Ca/P ratio between 1.65 and 1.53 and attesting to the formation of non-stoichiometric apatites in all samples, further validated by molecular simulation. The antimicrobial activity of the nanocomposites is evaluated in vitro against several bacterial and fungal strains, demonstrating their medical potential. Additionally, in silico analyses are performed to predict the absorption, distribution, metabolism, and excretion properties and the bioavailability of the collagen samples. This study paves the way for the development of novel biomaterials using chemoinformatics tools and methods, facilitating the optimization of design and synthesis parameters, as well as the prediction of biological outcomes. Future research directions should encompass the investigation of in vivo biocompatibility and bioactivity of the nanocomposites, while exploring further applications and functionalities of these innovative materials. [ABSTRACT FROM AUTHOR]

This paper presents the results of a study investigating the biodegradation of poly(butylene succinate) (PBS)/wheat bran (WB) biocomposites. Injection mouldings were subjected to biodegradation in compost-filled bioreactors under controlled humidity and temperature conditions. The effects of composting time (14, 42 and 70 days) and WB mass content (10%, 30% and 50% wt.) on the structural and thermal properties of the samples were investigated. Measurements were made by infrared spectral analysis, scanning electron microscopy, differential scanning calorimetry, thermogravimetric analysis, and gel permeation chromatography. Results demonstrated that both the thermal and structural properties of the samples depended greatly on the biodegradation time. Specifically, their crystallinity degree increased significantly while molecular mass sharply decreased with biodegradation time, whereas their thermal resistance only showed a slight increase. This resulted from enzymatic hydrolysis that led to the breakdown of ester bonds in polymer chains. It was also found that a higher WB content led to a higher mass loss in the biocomposite samples during biodegradation and affected their post-biodegradation properties. A higher bran content increased the degree of crystallinity of the biocomposite samples but reduced their thermal resistance and molecular mass. [ABSTRACT FROM AUTHOR]

This paper deals with the study of the degradation of polylactic acid (PLA) material structures and biocomposite systems with a PLA matrix containing ground natural particulate waste fillers, buckwheat husks and egg shells. Waste fillers were used without difficult cleaning operations to describe the effect of the raw waste material on PLA. Biocomposites with raw waste materials are increasingly coming to the forefront in car interiors and packaging products. The prepared material systems were exposed to controlled climatic ageing simulating long-term solar radiation and cyclic outdoor conditions. The degradation of the biocomposite systems was evaluated via thermal (differential scanning calorimetry) and mechanical properties (tensile and flexural tests, Charpy impact toughness). In addition to evaluating the degradation of the material structures using standardized tests, the influence and effect of controlled climatic ageing was visually assessed using SEM images (electron microscopy) of the surfaces and fracture surfaces of the test specimens. [ABSTRACT FROM AUTHOR]

Astragalus residue powder (ARP)/thermoplastic starch (TPS)/poly(lactic acid) (PLA) biocomposites were prepared by fused-deposition modeling (FDM) 3D-printing technology for the first time in this paper, and certain physico-mechanical properties and soil-burial-biodegradation behaviors of the biocomposites were investigated. The results showed that after raising the dosage of ARP, the tensile and flexural strengths, the elongation at break and the thermal stability of the sample decreased, while the tensile and flexural moduli increased; after raising the dosage of TPS, the tensile and flexural strengths, the elongation at break and the thermal stability all decreased. Among all of the samples, sample C—which was composed of 11 wt.% ARP, 10 wt.% TPS and 79 wt.% PLA—was the cheapest and also the most easily degraded in water. The soil-degradation-behavior analysis of sample C showed that, after being buried in soil, the surfaces of the samples became grey at first, then darkened, after which the smooth surfaces became rough and certain components were found to detach from the samples. After soil burial for 180 days, there was weight loss of 21.40%, and the flexural strength and modulus, as well as the storage modulus, reduced from 82.1 MPa, 11,922.16 MPa and 2395.3 MPa to 47.6 MPa, 6653.92 MPa and 1476.5 MPa, respectively. Soil burial had little effect on the glass transition, cold crystallization or melting temperatures, while it reduced the crystallinity of the samples. It is concluded that the FDM 3D-printed ARP/TPS/PLA biocomposites are easy to degrade in soil conditions. This study developed a new kind of thoroughly degradable biocomposite for FDM 3D printing. [ABSTRACT FROM AUTHOR]

This paper aims to apply a generic model for the transition to a product classified as a Product-Service System in the bike sharing case. For theoretical foundation, a systematic literature review was conducted, and then, the model was developed and validated with PSS experts and statistical analysis. Considering the need of PSS products to be aligned with the Tripple Botton Line, a Life Cycle Analysis (LCA) was performed to measure the environmental and human health impacts of a bike. Aiming to design an action plan and mitigate these impacts, the generic model was applied. The results contribute to (i) the theoretical development of the literature by proposing a generic model validated and applicable in other cases, and (ii) with the practical development, since with the application of the LCA and the model, it was possible to identify an alternative to mitigate the impacts of the most polluting part of a bike: the aluminum frame. Thus, this study proposes substituting aluminum with a polymeric biocomposite: a blend between polypropylene and bamboo fiber. Given the theoretical modeling of this work, future studies can focus on the practical validation of this blend through mechanical testing. [ABSTRACT FROM AUTHOR]

This paper focuses on the effect of okra bast fillers on biodegradation of poly(vinyl alcohol) composites. Fibers were obtained from okra plant stems via biological degumming and subjected to different chemical treatments such as scouring, alkalizing, maleic anhydride treatment, and vinyl acetate grafting. The fibers were ground and PVA-okra bast filler composites were produced at 20 wt% fiber load via the solution casting method. The obtained composites were tested in terms of mechanical properties and exposed to biodegradation in soil. Effects of okra bast filler addition and chemical treatments on changes in mass, breaking strength, elasticity modulus, and breaking elongation of composites upon soil biodegradation were determined. The composites can be considered for utilization in packaging and agricultural applications. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In this paper, rice milk-based beads were fabricated through gelation in a calcium chloride solution. Green extraction of chili pepper in water/ethanol was conducted in order to obtain powder extract (PE) rich in apigenin C-pentosyl-C-hexoside, capsaicin, and dihydrocapsaicin. The effect of capsaicinoids loading on beads' properties was evaluated in terms of morphological and physical properties. Swelling phenomena and diameter variation of beads were studied as a function of time proving correspondence with the PE amount. The effect of ionic strength on bead swelling was considered. Kinetic studies of PE release were conducted to investigate the release profiles, which were modeled through a modified Baker and Lonsdale model by considering the change in mean diameter over time. The effect of PE loading was then correlated to the growth of Cynodon dactylon weed through in vivo tests. The results corroborate the performances of the encapsulated PE to be used as natural and green herbicide release systems able to inhibit the growth and the proliferation of weeds. [ABSTRACT FROM AUTHOR]

Biomass–fungi composites, an emerging class of sustainable materials, have potential applications in the construction and packaging industries. Molding-based manufacturing methods are typically employed to make products from these composites. Recently, a 3D printing-based method was developed for biomass–fungi composites to eliminate the need for making molds and to facilitate customized product design compared with manufacturing methods based on molding and hot-pressing. This method has six stages: biomass–fungi material preparation; primary colonization; mixture preparation; printing; secondary colonization; and drying. This paper reports a study about the effects of waiting time between the mixture preparation and 3D printing using biomass–fungi composites. As the waiting time increased from 0.25 to 3 h, the hardness and compressibility of the prepared mixture increased. As the waiting time increased from 0.25 to 8 h, the shear viscosity showed a decreasing trend; the yield stress of the prepared mixture increased at the beginning, then significantly decreased until the waiting time reached 3 h, and then did not significantly vary after 3 h. As the waiting time increased, the storage modulus and loss modulus decreased, the loss tangent delta increased, and the minimum required printing pressure for continuous extrusion during extrusion-based 3D printing increased. The print quality (in terms of layer-height shrinkage and filament-width uniformity) was reasonably good when the waiting time did not exceed 4.5 h. [ABSTRACT FROM AUTHOR]

The irradiation of polymeric materials with ionizing radiation (γ-rays, X-rays, accelerated electrons, ion beams, etc.) may lead to disproportion, hydrogen abstraction, arrangements, degradation, and/or the formation of new bonds. The purpose of this paper is to evaluate the effect of gamma irradiation on some new poly(lactic acid) (PLA)-based blends and biocomposites, which is crucial when they are used for food packaging or medical purposes. The polymeric blends and biocomposites based on PLA and rosemary ethanolic extract (R) and poly(ethylene glycol) (PEG) (20 wt%) plasticized PLA, chitosan (CS) (3–6 wt%) and R (0.5 wt%) biocomposites were subjected to gamma irradiation treatment using three low γ-doses of 10, 20, and 30 kGy. The effect of irradiation was evaluated by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), thermogravimetry (TG), chemiluminescence method (CL), migration studies, and antibacterial activity tests. It was found that in comparison with neat PLA, the gamma irradiation in the oxidative conditions of the PLA-based blends and biocomposites, causes modifications in the structure, morphology, and thermal properties of the materials depending on irradiation dose and the presence of natural additives such as rosemary and chitosan. It was established that under a gamma-irradiation treatment with dose of 10–20 kGy, the PLA materials showed minor changes in structure and properties being suitable for application in packaging and in addition after irradiation with such doses their antimicrobial activity against Escherichia coli, Staphylococcus aureus, and Salmonella typhimurium is improved. [ABSTRACT FROM AUTHOR]

Silica is a popular filler, but in epoxidized natural rubber, can act as a cross-linking agent. Unfortunately, a high amount of silica is necessary to obtain satisfactory tensile strength. Moreover, a high amount of silica in ENR/silica hybrids is associated with low elongation at break. In our paper, we propose natural phenolic compounds, including quercetin, tannic acid, and gallic acid as natural and safe additional crosslinkers dedicated to ENR/silica hybrids to obtain bio-elastomers with improved mechanical properties. Therefore, toxic crosslinkers, such as peroxides or harmful accelerators can be eliminated. The impact of selected natural phenolic compounds on crosslinking effect, mechanical properties, color, and chemical structure of ENR/silica composite have been analyzed. The obtained results indicated that only 3 phr of selected natural phenolic compounds is able to improve crosslinking effect as well as mechanical properties of ENR/silica hybrids. Moreover, some of the prepared materials tend to regain mechanical properties after reprocessing. Such materials containing only natural and safe ingredients have a chance of becoming novel elastomeric biomaterials dedicated to biomedical applications. [ABSTRACT FROM AUTHOR]

In this paper, a biocomposite was prepared by liquid phase method using 58S bioactive glass, high molecular weight chitosan and 13X zeolite. Physical characterization of the sample was performed using FT-IR, XRD, FE-SEM and EDX analysis. Results of FT-IR showed the presence of bands related to each component. Also, a comparison between FT-IR spectrum and XRD pattern of chitosan with the ones of prepared composite confirms the cross-linking of chitosan. The compressive strength of the sample was determined using the stress-strain diagram. According to this test, the compressive strength of the sample is 51.43 MPa. Also, the bioactivity of the biocomposite was studied in the simulated body fluid (SBF) at 37 ° C for 3 days, which showed a favorable bioactivity. The XRD pattern and FE-SEM images of the biocomposite before and after immersion in SBF solution show the growth of apatite on the biocomposite. The EDX spectrum also confirms the presence of all components. According to the previous studies, the composite prepared in this paper has more desirable properties than similar composites.

In the present paper, we describe how a robust and fundamental methodology was developed for extraction and determination of a principal natural toxin compound, simplexin, from a series of bulk biocomposites. These complex matrices were fabricated by direct encapsulating either ground plant particles or an ethanolic crude extract of the Australian toxic pasture plant Pimelea trichostachya in the biodegradable polymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate). Proton nuclear magnetic resonance spectroscopy was initially employed to examine the chemical compositions of these complicated systems. Then, a more sensitive strategy was developed and validated by combining solid-phase extraction and ultrahigh-performance liquid chromatography hyphenated with a quadrupole Orbitrap mass spectrometer for the quantification of simplexin embedded in different biocomposites. Satisfactory linearity (R2 > 0.99) and recovery ranges (86.8–116%) with precision (relative standard deviations) of between 0.2 and 13% (n = 3) were achieved from seven biocomposites. The established protocol was further shown to be accurate and reliable in confirming the homogeneous distribution of the simplexin in different biocomposite formulations. A limited mass transfer of simplexin (< 3.5%) from one of the biocomposites into a simulated but sterilized in vitro rumen environment after a 10-day incubation was also revealed by utilizing the method. This quantitative analysis of targeted natural product within plant material-integrated polymeric platforms has potential application when controlled release is required in the bovine rumen and other biological systems. [ABSTRACT FROM AUTHOR]

This study investigated mechanical properties of biocomposites developed from recycled polylactic acid (PLA) from packaging industry and treated cellulosic fibers from pulp and paper solid waste. Microwave and enzymatic treatments were used for extraction and surface modification of hydrophilic cellulosic fibers. Enzymatic treatment was specifically performed for activation of hydroxyl groups and improvement of adhesion between matrix and fibers including controlling the length of cellulosic fibers with size reduction of around 50% (142 and 127 μm for primary and mixed biosolids, respectively) as compared to microwave treatment. Microwave treatment produced cellulosic fibers of 293 and 341 μm, for primary and mixed biosolids, respectively. Mechanical properties of biocomposites with 2% (w/w) of treated cellulosic fibers (Young's Modulus 887.83 MPa with tensile strain at breakpoint of 7.22%, tensile stress at yield 41.35 MPa) was enhanced in comparison to the recycled PLA (Young's Modulus 644.47 ± 30.086 MPa with tensile strain at breakpoint of 6.01 ± 0.83%, tensile stress at yield of 29.49 ± 3.64 MPa). Scanning electron microscopy revealed size reduction of cellulosic fibers. X-ray diffraction and Fourier transform infrared spectroscopy confirmed strong mechanical properties of novel biocomposites. [ABSTRACT FROM AUTHOR]

This paper presents the study of the properties of objects that were fabricated with fused deposition modeling technology while using Poly (lactic acid)/Walnut shell powder (PLA/WSP) biocomposite filaments. The WSP was treated while using NaOH followed by silane. The infrared spectrum of treated and untreated WSP was characterized. The result was that thermal and mechanical properties could be improved by adjusting the concentration of silane. The experimental results showed: the surface compatibility between WSP and PLA was dramatically improved through treatment with KH550. The crystalline, thermal gravity, and thermal degradation temperatures of biocomposite with untreated WSP were improved from 1.46%, 60.3 °C, and 239.87 °C to 2.84%, 61.3 °C, and 276.37 °C for the biocomposites with treated WSP, respectively. The tensile, flexural, and compressive strengths of biocomposites were raised each by 8.07%, 14.66%, and 23.32%. With the determined silane concentration, PLA/10–15 wt.% treated WSP biocomposites were processed and tested. The results showed that the tensile strength was improved to 56.2 MPa, which is very near to that of pure PLA. Finally, the porous scaffolds with controllable porosity and pore size were manufactured. [ABSTRACT FROM AUTHOR]

Global regulations are guiding society towards more sustainable material solutions. This increasing awareness of the need for environmentally friendly alternatives has led to a greater emphasis on biocomposites, which combine natural fibers with bio-based polymers. This study investigates how bleached softwood pulp fibers (BSWPF) and unbleached softwood pulp fibers (UBSWPF) affect the characteristics of poly(lactic acid) (PLA)-based biocomposites. UBSWPF is a more cost-effective option because it is manufactured with less processing steps than BSWPF. However, it is largely unexplored as a reinforcement in biopolymers. Through investigating the mechanical, thermal, and morphological aspects of the biocomposites, this study showed that UBSWP increased the modulus and impact strength of the PLA biocomposites better than BSWPF. The impact strength, modulus, and tensile strength of PLA-BSWPF and PLA-UBSWPF improved as the fiber content increased. However, a decrease in tensile strength was seen at higher percentages of UBSWPF in PLA. Despite the decrease in tensile strength at higher UBSWPF concentrations, both types of fibers improved the mechanical properties of the biocomposites, demonstrating a potential sustainable reinforcing material for PLA biocomposites. [ABSTRACT FROM AUTHOR]

All-cellulose composites (ACCs) have been fabricated by using a variety of cellulosic sources, versatile technologies, and are sustainable alternatives for traditional composites. In this study, nonwoven-woven ACC laminates were created from wood-based Spinnova short fibers and Lyocell fabrics via partial dissolution and an NaOH-urea solvent system. The less-known wood-based Spinnova fiber is created for the textile industry, but it also has great potential for the composite industry. To identify the mechanical properties of ACCs--which greatly influence the range of material application--tensile, impact, and flexural tests were conducted. The mechanical properties indicated only moderate properties, which are influenced by high porosity and weak fiber bonding. Despite this, valuable information on the nonwoven-woven structured ACCs was obtained. To improve the ACC laminate's ability to resist moisture, biobased coatings (e.g., commercially available birch bark betulin and suberin acid mixture) were applied on the surface of ACCs and it successfully improved the wetting resistance. The results of contact angle analyses demonstrated that the highest contact angle of 128° was measured for betulin-coated laminates and the best stable hydrophobicity calculated a minute after the beginning of the experiment were observed at 109° for the uncommercial pressurized hot ethanol (PHE) extract of birch bark. [ABSTRACT FROM AUTHOR]

Jarosite, an industrial waste, has the potential to be used as an alternative filler in biocomposites used as packaging material and can replace nondegradable thermoplastic. Such a novel approach of waste management strategy has not been studied till date. In this research work, different weight percentages of jarosite were mixed with poly(vinyl alcohol) (PVA) to fabricate polymer composites with better physico‐chemical, thermal, tensile, and biodegradation properties. The data indicate that a low concentration of jarosite (3 wt.%) improved the tensile strength by 198.7% and the composite showed higher thermal stability by 6.3% than that of the neat PVA. X‐ray diffractogram and transmission electron microscopic analysis revealed a strong interaction between PVA and jarosite. Interestingly, the addition of jarosite reduced the water absorption capacity and thickness swelling of the PVA composite by 58% and 54.7%, respectively. Jarosite‐incorporated composites showed lesser degradation potential (64%) than the control composites (84%) after 60 days under soil burial conditions, indicating that PVA‐jarosite composites have a higher shelf‐life, which is needed for packaging materials. These composites can also be good alternant for thermoplastic used in preparation of cuboid, sealing, and decorative materials. Also, this would be a novel sustainable approach for managing/reducing jarosite waste. Highlights: Jarosite was reinforced with PVA to fabricate biocomposites.The maximum tensile strength of the composite was achieved as 45.4 MPa.The thermal stability of mechanically optimized composite is found at 320°C.After 60 days under soil burial, the composite lost 64.8% of its original weight.Developed composites can be good alternant for nondegradable thermoplastic. [ABSTRACT FROM AUTHOR]

The development of the paper industry has led to the discharge of a large amount of papermaking waste liquid containing lignosulfonate. These lignin black liquids cause a lot of pollution in nature, which runs counter to the current environmental protection strategy under the global goal. Through the development and use of lignosulfonate in papermaking waste liquid to increase the utilization of harmful substances in waste liquid, we aim to promote waste liquid treatment and reduce environmental pollution. This paper proposes a new strategy to synthesize novel glue-free biocomposites with high-performance interfacial compatibility from papermaking by-product sodium lignosulfonate/chitosan (L/C) and waste bamboo. This L/C bamboo biocomposite material has good mechanical properties and durability, low formaldehyde emissions, a high recovery rate, meets the requirements of wood-based panels, and reduces environmental pollution. This method is low in cost, has the potential for large-scale production, and can effectively reduce the environmental pollution of the paper industry, promoting the recycling of biomass and helping the future manufacture of glue-free panels, which can be widely used in the preparation of bookcase, furniture, floor and so on.

Abstract Bone cement based on magnesium phosphate has extremely favorable properties for its application as a bioactive bone substitute. However, further improvement is still expected due to difficult injectability and high brittleness. This paper reported the preparation of novel biocomposite cement, classified as dual-setting, obtained through ceramic hydration reaction and polymer cross-linking. Cement was composed of magnesium potassium phosphate and sodium alginate cross-linked with calcium carbonate and gluconolactone. The properties of the obtained composite material and the influence of sodium alginate modification on cement reaction were investigated. Our results indicated that proposed cements have several advantages compared to ceramic cement, like shortened curing time, diverse microstructure, increased wettability and biodegradability and improved paste cohesion and injectability. The magnesium phosphate cement with 1.50% sodium alginate obtained using a powder-to-liquid ratio of 2.5 g/mL and cross-linking ratio 90/120 of GDL/CC showed the most favorable properties, with no adverse effect on mechanical strength and osteoblasts cytocompatibility. Overall, our research suggested that this novel cement might have promising medical application prospects, especially in minimally invasive procedures.

• The theory of shear lag model is extended. • Viscoelastic shear lag model is developed to illustrate the mechanical behavior of axon under transient tensile loading. • The paper explains how the vulnerable axons protect themselves from overall damage over the course of evolution. • The paper explains how axons achieve an outstanding mechanical balance of high stiffness and toughness. Axons with staggered microtubules cross-linked by tau protein possess a remarkable mechanical balance of high specific stiffness and toughness. Owing to their viscoelastic nature, axons exhibit stress rate-dependent mechanical behavior, which is relevant to their selective vulnerability to damage in traumatic brain injury. A Kelvin–Voigt viscoelastic shear lag model is developed to elucidate the mechanical responses of axons under transient tensile force. Analytical closed-form expressions are derived to characterize the relative sliding, stress transfer and failure mechanism between microtubule and tau protein while the axon is stretched transiently. The results from the theoretical solutions elucidate how the MT-tau interface length and stress rate affect the mechanical responses of axon. It is found that axonal failure mechanism may be different under different loading conditions. Long microtubules are more vulnerable to rupture at high stress rate, yet short microtubules are likely to detach from microtubule bundles under large deformations. In the view of multi-level failure of axon, it is illustrated how the vulnerable axons protect themselves from overall damage, and how the axon can simultaneously achieve an outstanding mechanical balance of high specific stiffness and toughness. [ABSTRACT FROM AUTHOR]

Raising environmental awareness had forced researchers to explore the potential and implementation of environmentally friendly materials as alternatives for conventional materials. Environmentally friendly materials are biodegradable, safer, non-toxic, lightweight, cheap, and readily available. Arrowroot starch has a high content of amylose (~35.20%) which makes it suitable for better film production. Starch extracted from arrowroot rhizomes can be blended, plasticized with other polymers, or reinforced with fibres to improve their properties. The melt blended glycidyl methacrylate-grafted polylactide (PLA-g-GMA) and treated arrowroot fiber (TAF) treated with coupling agent developed PLA-g-GMA/TAF composite, which showed better properties than the PLA/AF composite. To the best of our knowledge, no comprehensive review paper was published on arrowroot fibres, starch biopolymer, and its biocomposites before. The present review focuses on recent works related to the properties of arrowroot fibres and starch, and their fabrication as biocomposites. The review also reveals the vast potential of arrowroot fibres and starch for food industries, medicines, textiles, biofuel, pulp, and paper-making industries, bioenergy, packaging, automotive, and many more.

Owing to its viscoelastic nature, axon exhibits a stress rate-dependent me- chanical behavior. An extended tension-shear chain model with Kelvin-Voigt viscoelas- ticity is developed to illustrate the micromechanical behavior of the axon under dynamic torsional conditions. Theoretical closed-form expressions are derived to predict the de- formation, stress transfer, and failure mechanism between microtubule (MT) and tau protein while the axon is sheared dynamically. The results obtained from the present an- alytical solutions demonstrate how the MT-tau interface length, spacing between the tau proteins, and loading rate affect the mechanical properties of axon. Moreover, it is found that the MTs are more prone to rupture due to the contributions from the viscoelastic effects. Under the torsional force, the MTs are so long that the stress concentrates at the loaded end where axonal MTs will break. This MT-tau protein dynamics model can help to understand the underlying pathology and molecular mechanisms of axonal injury. Additionally, the emphasis of this paper is on the micromechanical behavior of axon, whereas this theoretical model can be equally applicable to other soft or hard tissues, owning the similar fibrous structure. [ABSTRACT FROM AUTHOR]

The canola oil industry generates significant waste as canola meal (CM) which has limited scope and applications. This study demonstrates the possibility of valorization of CM as a sustainable natural filler in a biodegradable polymer composite of Poly(lactic acid) (PLA). Generally, interfacial bonding between natural fibers and the polymer matrix in the composite is weak and non-uniform. One possible solution is to derivatize natural fibre to introduce interfacial bond strength and compatibility with the PLA polymer matrix. Here, CM was succinylated in a reactive extrusion process using succinic anhydride at 30 wt% to get 14% derivatization with 0.02 g of -COOH density per g of CM. The CM or succinylated CM at 5 and 15 wt% was co-extruded with amorphous PLA to get composite fibers. CM-PLA and succinylated CM-PLA biocomposites were foamed using a mild and green microcellular foaming process, with CO2 as an impregnating agent without any addition of organic solvents. The properties of the foams were analyzed using differential scanning calorimetry (DSC), Dynamic mechanical thermal analysis (DMTA), shrinkage, and imaging. The addition of CM or succinylated CM as a natural filler did not significantly change the glass transition temperature, melting point, percent crystallization, stiffness, and thermal stability of PLA foams. This suggests succinylation (modification) of CM is not a mandatory step for improving interphase compatibility with the amorphous PLA. The new PLA-CM foams can be a good alternative in the packaging industry replacing the existing petroleum-based polymer foams. Highlights: Valorization of CM as a sustainable natural filler in PLA biocomposite foams Modification of CM is not mandatory for interphase compatibility with the PLA PLA-CM foams have similar appearance and properties to control PLA foams New PLA-CM foams can be a good alternative in the packaging industry [ABSTRACT FROM AUTHOR]

Biopolymers are biodegradable and renewable and can significantly reduce environmental impacts. For this reason, biocomposites based on a plasticized starch and cross-linker matrix and with a microfibrillated OCC cardboard cellulose reinforcement were developed. Biocomposites were prepared by suspension casting with varied amounts of microfibrillated cellulose: 0, 4, 8, and 12 wt%. Polyethylene glycol diglycidyl ether (PEGDE) was used as a cross-linking, water-soluble, and non-toxic agent. Microfibrillated cellulose (MFC) from OCC cardboard showed appropriate properties and potential for good performance as a reinforcement. In general, microfiber incorporation and matrix cross-linking increased crystallization, reduced water adsorption, and improved the physical and tensile properties of the plasticized starch. Biocomposites cross-linked with PEGDE and reinforced with 12 wt% MFC showed the best properties. The chemical and structural changes induced by the cross-linking of starch chains and MFC reinforcement were confirmed by FTIR, NMR, and XRD. Biodegradation higher than 80% was achieved for most biocomposites in 15 days of laboratory compost. [ABSTRACT FROM AUTHOR]

Polylactic-acid–starch-based polymer composite (PLA/TPS) has good thermal stability for biocomposites. However, the physical and mechanical properties of PLA/TPS do not meet the standards. It needed additives to enhance its physical and mechanical properties. The aim was to improve the physical and mechanical properties of PLA/thermoplastic starch using sucrose. In addition, this study evaluated the enhancement of thermal properties of PLA/thermoplastic starch using sucrose. This study used sucrose as an additive to enhance the PLA/TPS composite. The addition of sucrose inhibits the degradation of biocomposites. This means that thermal stability increases. The thermal stability increased because the degree of crystallinity increased with the addition of sucrose, which was also proven in the XRD result. The addition of sucrose caused the morphology of the biocomposite to have pores. The FESEM results showed that biocomposites with the addition of sucrose had pores and gaps. These gaps result from low adhesion between polymers, causing a decrease in the mechanical and physical properties of the sample. Based on the FTIR spectra, biocomposite PLA/TPS blends with the addition of sucrose still have many hydroxyl groups that will lead to attracting other molecules or ions, such as oxygen or water. This phenomenon affects the physical and mechanical properties of materials. The physical and mechanical properties increased with sucrose addition. The best composite was prepared using 3% sucrose. This is because sucrose has a crystalline structure that affects the properties of biocomposites. However, the addition of 3% sucrose was not as effective as that of neat PLA. [ABSTRACT FROM AUTHOR]

A novel, promising biocomposite was synthesized through the free radical polymerization method using methyl methacrylate (MMA), acrylic acid (AA), and hydroxyapatite derived from oyster shells (Os‐HA). Fourier transform infrared spectroscopy (FTIR) peaks indicate the conjugation of Os‐HA in the biocomposite. From the TGA analysis, it was observed that a weight loss of nearly 2% is achieved at 210°C, up to 15% at 210 to 420°C, and up to 95% at 420 to 580°C. The SEM image shows the uniform dispersion of the Os‐HA particles and strong interaction with the copolymer matrix. The broad spectrum at 2θ = 14.6° in XRD analysis indicates the amorphous nature of poly(MMA‐co‐AA)/Os‐HA. The higher inhibition zone of the biocomposite is observed at 125 μL against E. coli bacteria. The maximum water absorption is observed at 15 wt% of Os‐HA. The young's modulus gradually increases, while the impact strength decreases up to 20 wt% of Os‐HA. The artificial neural network (ANN) model has been used to assess the optimum values of impact strength, tensile strength, and Young's modulus of the biocomposite material. The correlation factor (R = 0.998) of the ANN model data indicates greater accuracy of the experimental result. [ABSTRACT FROM AUTHOR]

The present work aimed to examine the tensile and flexural behaviors of biocomposites reinforced with continuous plant fibers, utilizing a range of polylactic acid (PLA) matrix materials and varying fiber content. These biocomposites were fabricated using an in situ-impregnated fused filament fabrication (FFF) technique. The study incorporated three different PLA matrix materials, namely PLA, PLA-Matte (PLA-Ma), and PLA-ST, each with distinct mechanical properties. The effect of different linear densities of continuous ramie yarns on the biocomposites was also investigated. The results show that adding continuous ramie yarn significantly enhances both the tensile and flexural strengths, as well as the modulus, of the matrixes. Furthermore, there was a positive correlation between the content of ramie yarn and the increases in strength and modulus. Moreover, the introduction of ramie yarns altered the fracture behavior of the biocomposites, shifting towards brittle fracture. This change significantly impacted the fracture toughness of the matrixes and resulted in a convergence of elongation at the point of breakage. [ABSTRACT FROM AUTHOR]

This study explores the synthesis and characterization of chitosan/gelatine films incorporating nickel ferrite (NiFe2O4) and cobalt ferrite (CoFe2O4) nanoparticles. The magnetic nanoparticles exhibit superparamagnetic behaviour, making them attractive for various applications, including biomedical uses. The X-ray diffraction analysis confirmed the successful synthesis of NiFe2O4 and CoFe2O4 nanoparticles, and the scanning electron micrographs illustrated well-dispersed ferrite nanoparticles within the biopolymer network, despite the formation of some aggregates attributed to magnetic interactions. Magnetization loops revealed lower saturation magnetization values for the composites, attributed to the chitosan/gelatine coating and the dielectric studies, indicating increased dielectric losses in the presence of ferrites, particularly pronounced in the case of NiFe2O4, suggesting interactions at the interface region between the polymer and ferrite particles. The AC conductivity shows almost linear frequency dependence, associated with proton polarization and conduction processes, more significant at higher temperatures for samples with ferrite particles. [ABSTRACT FROM AUTHOR]

Hydroxyapatite (HA) coated Ti-6Al-4V alloy biocomposite has been accepted as one of the most promising implant materials for orthopaedic and dental applications because of its favorable biocompatibility and mechanical properties. After the plasma sprayed HA composite coating on titanium alloy substrate biocomposite was prepared, a novel meshless numerical analysis method of the coupled adaptive meshfree method and finite element method (AMF-FEM) is developed for the simulation of the thermo-elasto-plastic contact problems of the biocomposites in this paper. The adaptive meshfree method based on strain energy gradient is used in the concerned contact domain, and FEM is used in the non-contact domain to overcome the difficulties of the meshfree method and improve the calculation efficiency. The thermo-elasto-plastic contact model using the incremental-initial stiffness method, error estimation and the local adaptive refinement strategy for the AMF-FEM method are combined. The AMF-FEM thermo-elasto-plastic model takes into account the temperature variation, micro plastic flow, the thermo-elasto-plastic coupling behavior and the strain-hardening property of the materials. The examples of the elastic/thermal-elastic contact of real HA-coated rough surfaces using the AMF-FEM is studied for two biomaterial models, respectively. The results all show that the AMF-FEM solutions are accurate, efficient, and can be widely applied to different thermo-elasto-plastic contact multi-layer biomaterial models considering different geometric parameter, material parameter, thermal and friction properties. [ABSTRACT FROM AUTHOR]

This paper demonstrates the preparation of transparent biocomposites from chitin nanofiber using a series of simple mechanical treatments after the removal of proteins and minerals. Field emission scanning electron microscopy (FE-SEM) images show that the prepared chitin nanofibers are highly uniform with a width of less than 50 nm and a high aspect ratio. Due to the nano-size, the fibers are small enough to retain the transparency of the neat polymethylmethacrylate resin. Light transmission of the obtained chitin/PMMA biocomposite was 90.2%, in comparison to the neat resin, which was 92.6%. Mechanical property tests showed that chitin nanofibers significantly improved the tensile strengths and Young's modulus of the neat PMMA, which increased from 43.8 MPa to 102 MPa and 1.6 GPa to 3.43 GPa, respectively. PMMA resin was found to be well dispersed in the biocomposite and had little effect on the tensile properties of the material. The properties mentioned above qualify the chitin nanofiber as a green and high-performance candidate having potential to be applied in next-generation optical electronic and building systems as a commercially available material. [ABSTRACT FROM AUTHOR]

The use of wheat middlings (WM) and rice husks (RH) as biofillers for mixing with poly(lactic acid) (PLA) matrix to produce new 3D-printable biocomposites was assessed. Filaments containing 10 and 20 wt.% agro-waste-derived biofillers were manufactured and, for the sake of comparison, filaments of neat PLA were also produced. The obtained filaments were characterized via thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), showing potential for further application in additive manufacturing processing. Three-dimensionally printed specimens were thus produced and characterized via: DSC, also evaluating the specific heat capacity (CP) of specific 3D-printed specimens; dynamic mechanical analysis (DMA), also applied for determining the coefficient of linear thermal expansion (CLTE) measured on 3D-printed specimens in two different directions (X and Y); and tensile tests. The latter testing campaign was carried out along three printing directions (X, Y, and Z axes) to test the intrinsic biocomposite features (X-printed samples) as well as interbead and interlayer adhesion (Y- and Z-printed specimens, respectively). All samples demonstrated acceptable properties. The inclusion of a cost-free natural material leads to a strong reduction of the whole material cost. Implementing this new class of composite material to an additive manufacturing technique can significantly reduce the environmental impact of 3D-printed products. [ABSTRACT FROM AUTHOR]

In the context of sustainable materials, this study explores the effects of accelerated weathering testing and bacterial biodegradation on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/rapeseed microfiber biocomposites. Accelerated weathering, simulating outdoor environmental conditions, and bacterial biodegradation, representing natural degradation processes in soil, were employed to investigate the changes in the mechanical, thermal and morphological properties of these materials during its post-production life cycle. Attention was paid to the assessment of the change of structural, mechanical and calorimetric properties of alkali and N-methylmorpholine N-oxide (NMMO)-treated rapeseed microfiber (RS)-reinforced plasticized PHBV composites before and after accelerated weathering. Results revealed that accelerated weathering led to an increase in stiffness, but a reduction in tensile strength and elongation at break, of the investigated PHBV biocomposites. Additionally, during accelerated weathering, the crystallinity of PHBV biocomposites increased, especially in the presence of RS, due to both the hydrolytic degradation of the polymer matrix and the nucleating effect of the filler. It has been observed that an increase in PHBV crystallinity, determined by DSC measurements, correlates with the intensity ratio I1225/1180 obtained from FTIR-ATR data. The treatment of RS microfibers increased the biodegradation capability of the developed PHBV composites, especially in the case of chemically untreated RS. All the developed PHBV composites demonstrated faster biodegradation in comparison to neat PHBV matrix. [ABSTRACT FROM AUTHOR]

The main advantage of green composites is their biodegradability, but this biodegradability can also be considered a drawback if the degradation appears during the service life of the component. Therefore, the study of the mechanical behavior of green composites after hygrothermal aging tests is necessary to analyze their degradation process. This study aims to comprehensively analyze the hygrothermal aging behavior and aging mechanism of flax-fiber-reinforced polylactic acid (PLA) biocomposites. The fully biodegradable composites are manufactured by compression molding. In addition, the influence of atmospheric-pressure plasma treatment on the mechanical properties of the biocomposite is studied. Specimens are exposed to water vapor and 40 °C environmental conditions in a stove for up to 42 days. Several specimens of each type are taken out at regular intervals and tested to examine the water absorption, mechanical properties, and thermal characterization. The results show that the stiffness was significantly reduced after 24 h due to matrix degradation, while the strength was reduced only after three weeks. [ABSTRACT FROM AUTHOR]