Search

The escalating significance of 3D printing in various industries is underscored by its ability to rapidly and cost-effectively produce distinctive parts. Among the 3D printing methods, fused filament fabrication (FFF) has emerged as a highly productive and cost-effective approach. While extensive efforts have been made to enhance the qualities of FFF products, challenges persist in material availability and quality compared to traditional methods. This study provides a meticulous overview of the FFF process, delving into various 3D printing processes, polymers, and polymer composites. Despite documented efforts to augment mechanical, thermal, and electrical properties, material constraints remain a focal point. Our analysis extends to various PLA/biocomposites, shedding light on achieved improvements and potential applications. Looking forward, the future trend in FFF technology suggests a paradigm shift towards enhanced material diversity and performance. Anticipated applications span beyond traditional use cases, encompassing sustainable manufacturing, medical devices, and eco-friendly construction materials. This comprehensive review not only consolidates the current state of FFF and PLA-biocomposites but also anticipates future trends and potential applications. This research enhances the current knowledge of additive manufacturing and sets a standard for assessing developments in FFF technology by comparing them to previous works. [ABSTRACT FROM AUTHOR]

To efficiently and economically utilize a wood-plastic biocomposite, an eco-friendly biocomposite was prepared using modified poplar fiber and polylactic acid (PLA) via 3D printing technology for the first time. First, the effects of poplar fiber (0, 1, 3, 5, 7, and 9%) on the mechanical and rheological properties of the printed biocomposites were investigated. Subsequently, the printing parameters, including printing temperature, speed, and layer thickness, were optimized to obtain the biocomposite with superior properties. Finally, four printing orientations were applied to the biocomposite based on the optimized printing parameters to study the effect of filament orientation on the properties of the biocomposite. Favorable printability and mechanical properties of the biocomposite were obtained at 5% poplar fiber. The optimal printing temperature of 220 °C, speed of 40 mm/s, and layer thickness of 0.2 mm were obtained to produce the desired mechanical properties of the biocomposite with the printing orientation in a longitudinal stripe. However, the printing parameters should be chosen according to the applications, where different physical and mechanical properties are needed to achieve efficient and economical utilization of the biocomposites. [ABSTRACT FROM AUTHOR]

In the material extrusion of the thermoplastic filaments, known as Fused Deposition Modelling, usually, pure thermoplastic polymers are used. Recently, the focus of the research is given to the development of new biocomposite thermoplastic materials. In our research, 3D printable biocomposite filaments, made with the addition of 50 wt.% of cardboard dust to the HDPE and PLA polymer matrix were studied. The influence of the added cardboard dust on structural, morphological and mechanical properties of the 3D printable biocomposite filaments was investigated. With the addition of the corrugated cardboard dust into the HDPE and PLA polymer matrix the changes in density, uniformity, chemical structure and transition temperatures of the samples were detected. The addition of the cardboard dust into the HDPE polymer matrix lead to low tenacity, toughness, deformability resulting in brittleness of the 3D printable biocomposite filament, whereas the addition of the cardboard dust into the PLA polymer matrix lowered tensile properties, but didn't affected bending toughness and has even improved compression strength of the 3D printable filament. [ABSTRACT FROM AUTHOR]