Search

Focuses on the reliability and power quality at Champion International Corp. paper mill in Deferiet, New York. Numerous process interruptions experienced by Champion; Voltage sags emanating from the Niagara Mohawk Power Corp. transmission system; Causes and location of faults; Mitigation techniques.

The papers address the following key areas: ' B I Applications of IoT and digital twin in electrical power systems: A comprehensive survey i b ': This research paper reviews the applications of the Internet of Things (IoT) and digital twin technology in electrical power systems. With the growth of Internet of Things (IoT) techniques, applications have become smarter, and linked gadgets allow them to be used in many parts of power systems. ' B I A new low-cost and low-power industrial Internet of Things infrastructure for effective integration of distributed and isolated systems with smart grids i b ': This research paper provides an Internet of Things (IoT) infrastructure solution based on a newly designed low-cost microcontroller-based IoT remote terminal unit (RTU) to integrate new, old, and conventional sites of existing grids with smart grids. [Extracted from the article]

Highlights: [•] Effect of [DBDS], time, air and paper-Cu proximity on Cu x S deposition was studied. [•] XPS and EDX revealed deposition of Cu x S in paper increased with time or [DBDS]. [•] O2 was observed to have a key role in Cu x S displacement from the conductor surface. [•] A bifurcated pathway for Cu x S deposition in oil-immersed equipment is proposed. [Copyright &y& Elsevier]

This article discusses the role of power electronic converters in smart grids and electric vehicle applications. The authors highlight the technical connection between renewable energy, smart grids, energy storage, and electric vehicles. The special issue includes twelve accepted papers that cover topics such as high gain DC-DC converters, power converters for electric vehicle and motor drive applications, and power system applications. The papers present various novel topologies and control techniques, indicating the rapid growth and future potential of power converters in these fields. The authors express their appreciation to the contributing authors and anonymous reviewers for their valuable contributions to this special issue. [Extracted from the article]

In the not-too-distant future, humans will return to the Moon and step foot for the first time on Mars. Eventually, humanity will colonize these celestial bodies, where living and working will be commonplace. Energy is fundamental to all life. The energy that people use to sustain themselves on Earth, and in particular on these other worlds, is the integrated, safe production of electrical power, day and night. This paper proposes a radically new solution to this problem: Solar Tracking by day and a Solar Rechargeable Calcium Oxide Chemical Thermoelectric Reactor by night. Called the "Robotic End Effector for Lunar and Martian Geological Exploration of Space" (REEGES) Day/Night Power Generator Station, this form of thermoelectric power generation is mathematically modeled, simulation is performed, and a concept model design is demonstrated in this paper. The results of the presented simulation show the maximum total system output capability is 9.89 V, 6.66 A, and 65.9 W, with an operating time of up to 12 h, through a scalable design. This research provides instructions to the Space Research Community on a complete and novel development methodology for creating fully customized, configurable, safe, and reliable solar/thermoelectric day/night power generators, specifically meant for use on the Moon and Mars, using the Proportional-Integral-Derivative++ (PID++) Humanoid Motion Control Algorithm for its operation on a computationally lightweight microcontroller. [ABSTRACT FROM AUTHOR]

Abstract: Turkish electricity market law (EML) came into force in 2001 aiming at establishing a financially strong, stable, transparent and competitive electricity market based on bilateral contracts. Also, a balancing and settlement system (BSS) was put into practice in November 2004 to create a market where uncontracted generation can be traded, and actual implementation of the BSS started on August, 1st 2006 following a 21-month virtual implementation period. However, BSS has always been criticized from its beginning as transferring excessive profits to private generation companies. The present paper analyzes the implementation of BSS and argues that current BSS not only undermines the healthy development of the electricity market in Turkey but also prevents power investments due to uncertainties it created. It concludes that since the inconsistency between the objectives of EML and results of BSS in practice is obvious, Turkish policy makers need to modify current electricity market policy in line with suggestions presented in the paper. [Copyright &y& Elsevier]

Batteries have been integral components in modern vehicles, initially powering starter motors and ensuring stable electrical conditions in various vehicle systems and later in energy sources of drive electric motors. Over time, their significance has grown exponentially with the advent of features such as "Start & Stop" systems, micro hybridization, and kinetic energy regeneration. This trend culminated in the emergence of hybrid and electric vehicles, where batteries are the energy source of the electric traction motors. The evolution of storage for vehicles has been driven by the need for larger autonomy, a higher number of cycles, lower self-discharge rates, enhanced performance in extreme temperatures, and greater electrical power extraction capacity. As these technologies have advanced, so have they the methods for their disposal, recovery, and recycling. However, one critical aspect often overlooked is the potential for battery reuse once they reach the end of their useful life. For each battery technology, specific regeneration methods have been developed, aiming to restore the battery to its initial performance state or something very close to it. This focus on regeneration holds significant economic implications, particularly for vehicles where batteries represent a substantial share of the overall cost, such as hybrid and electric vehicles. This paper conducts a comprehensive review of battery technologies employed in vehicles from their inception to the present day. Special attention is given to identifying common failures within these technologies. Additionally, the scientific literature and existing patents addressing regeneration methods are explored, shedding light on the promising avenues for extending the life and performance of automotive batteries. [ABSTRACT FROM AUTHOR]

The combined production of electricity and thermal energy (combined heat and power or co-generation) is the most efficient and convenient approach to reduce costs for energy at industrial power plants and district heating plants that use natural gas as fuel to produce thermal energy for various needs. This paper analyses the operational characteristics of the combined heat and power plant, which has been operating since January 1, 2021, at the Voždovac Heating Plant as part of the Belgrade district heating system. The combined heat and power plant consists of three gas engine units with a total nominal electric power of 10 MW and thermal power of 10.1 MW, which use natural gas as fuel. The combined heat and power plant is used for district heating and preparing domestic hot water while electricity is sold to the local electric grid. The analysis in this paper focuses on the plant's operational characteristics: the number of working hours, the total energy consumption and energy production, the efficiency as well as the operational and maintenance costs. Also, the impact of the drastic changes in the prices of natural gas, electricity, and maintenance costs in the last year on the financial profitability of the combined heat and power plant was analysed in particular. [ABSTRACT FROM AUTHOR]

This document discusses recent advances and challenges in emerging power systems, specifically focusing on the integration of renewable energy sources with conventional power networks. The development of renewable energy solutions has been driven by concerns about diminishing fossil fuels, increasing energy demand, pollution, and global warming. The integration of renewable energy sources presents challenges in terms of operation, control, and protection practices. The document highlights 16 research papers that cover various topics related to power systems and the challenges faced by emerging power systems. These papers explore concepts such as floating wind farms, coordinated control of fast charging stations and distributed energy resources, AI tools for voltage analysis, open power meters, fault location methods, load forecasting, inductive compensation, blockchain-based energy markets, vibration suppression in smart structures, and more. The document concludes by inviting further papers for a second volume on recent advances and challenges in emerging power systems. [Extracted from the article]

Full- and reduced-order observers have been used in many engineering applications, particularly for energy systems. Applications of observers to energy systems are twofold: (1) the use of observed variables of dynamic systems for the purpose of feedback control and (2) the use of observers in their own right to observe (estimate) state variables of particular energy processes and systems. In addition to the classical Luenberger-type observers, we will review some papers on functional, fractional, and disturbance observers, as well as sliding-mode observers used for energy systems. Observers have been applied to energy systems in both continuous and discrete time domains and in both deterministic and stochastic problem formulations to observe (estimate) state variables over either finite or infinite time (steady-state) intervals. This overview paper will provide a detailed overview of observers used for linear and linearized mathematical models of energy systems and review the most important and most recent papers on the use of observers for nonlinear lumped (concentrated)-parameter systems. The emphasis will be on applications of observers to renewable energy systems, such as fuel cells, batteries, solar cells, and wind turbines. In addition, we will present recent research results on the use of observers for distributed-parameter systems and comment on their actual and potential applications in energy processes and systems. Due to the large number of papers that have been published on this topic, we will concentrate our attention mostly on papers published in high-quality journals in recent years, mostly in the past decade. [ABSTRACT FROM AUTHOR]

The rapid development of electric vehicles (EVs) has created more possibilities for their flexible participation in electric power dispatching. Considering the clustering and fast mobility of EVs coinciding with real-time market requirements for responsive demands, a bidding strategy is proposed in this paper to assist EV aggregators with submitting reasonable quotations for the real-time market. Based on Bayesian updating, the strategy in this paper considers relevant factors such as aggregator cost and expected return. First, a quotation strategy in electricity spot market is proposed for EV aggregators. Second, the applicable scope of the strategy is given under different scenarios. Then, the objective function of learning is proposed, and the specific process of Bayesian updating is demonstrated. Finally, a case study of the aggregator quotation strategy based on Bayesian updating is simulated to verify the effectiveness and feasibility of the proposed strategy, which helps improve the bidding success rate of EVs and peak-to-valley balance of the grid. [ABSTRACT FROM AUTHOR]

Ensuring an adequate electric power supply while minimizing redundant generation is the main objective of power load forecasting, as this is essential for the power system to operate efficiently. Therefore, accurate power load forecasting is of great significance to save social resources and promote economic development. In the current study, a hybrid CEEMDAN-TCN-ESN forecasting model based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and higher-frequency and lower-frequency component reconstruction is proposed for short-term load forecasting research. In this paper, we select the historical national electricity load data of Panama as the research subject and make hourly forecasts of its electricity load data. The results show that the RMSE and MAE predicted by the CEEMDAN-TCN-ESN model on this dataset are 15.081 and 10.944, respectively, and R2 is 0.994. Compared to the second-best model (CEEMDAN-TCN), the RMSE is reduced by 9.52%, and the MAE is reduced by 17.39%. The hybrid model proposed in this paper effectively extracts the complex features of short-term power load data and successfully merges subseries according to certain similar features. It learns the complex and varying features of higher-frequency series and the obvious regularity of the lower-frequency-trend series well, which could be applicable to real-world short-term power load forecasting work. [ABSTRACT FROM AUTHOR]

In this paper, a double-pole double-throw analog switch with n-channel architecture driven by a charge pump is described. The architecture proposed in this paper not only can reduce the on-resistance of the complementary metal oxide semiconductor (CMOS) switch, but also can realize a stable on-resistance within the full swing range of the input signal. This analog switch has the characteristics of high-speed, low-voltage, and high linearity, which is suitable for high-speed USB (Universal Serial Bus) 2.0 applications and meets low-speed and full-speed USB requirements. The test chip using a 0.25 μm BCD (bipolar–CMOS–DMOS) process confirms the characteristics of the switch. It uses + 2.8 to + 5.5 V single power supply, and the normal operating temperature range is − 40 to + 85 °C. This switch has an over-voltage protection function, which can prevent damage to the switch from the high input voltage. Besides, the switch port can realize dual-direction transmission. The analog switch designed in this paper solves some problems of traditional analog switches, such as large on-resistance, large supply current, and large parasitic capacitance. The on-resistance of the analog switch architecture in this paper is 5 Ω and the on-resistance flatness is 0.1 Ω. The supply current is as low as 0.87 μA while the whole chip area is 0.65 mm2. [ABSTRACT FROM AUTHOR]

Introduction. Solar photovoltaic (PV) has recently become very important especially in electrical power applications for countries with high luminosity because it is an effectively unlimited available energy resource. Depending on solar radiation and temperature, the PV generator has a non-linear characteristic with a maximum power point (MPP). The novelty is the efficiency improvement of a PV energy module, it is necessary to track the MPP of the PV array regardless of temperature or irradiation circumstances. Purpose. This paper presents the modeling and the digitally simulation under MATLAB/Simulink of a Fuzzy Logic Controller based on Voltage Perturbation Algorithm (FLC-VPA) applied to PV battery charging system, which consists of PV module, DC-DC boost converter, MPP tracking (MPPT) unit and battery storage. Methods. The DSP1104 is then used to experimentally implement this MPPT algorithm for real-time driving. The obtained results show the high precision of the proposed FLC-VPA MPPT around the optimal point compared to the conventional VPA under stable and changing meteorological conditions. Practical value. The experimental results approve the effectiveness and validity of the proposed total control system in the PV system. References 30, tables 3, figures 17. [ABSTRACT FROM AUTHOR]

The widespread use of static converters for controlling electrical machines and the concern for electrical power quality in industrial environments provide an opportunity for utilizing these devices to enhance the power quality. In this context, this work presents a back-to-back converter model for driving induction machines. The converter is designed to correct the power factor of the point common coupling (PCC), compensate for harmonic currents (acting as an active filter), and withstand voltage sags. The necessary control system models were developed, and an alternative implementation for these functions in the converter was proposed. The results demonstrate the technical feasibility of this solution, as the converter operated within its nominal limits by compensating for harmonics and reactive power. Moreover, the equipment showed resilience to severe voltage sags. The contribution of this paper focuses on the multifunctionality of the frequency converter for driving induction machines. It emphasizes the advantage of the inverter in improving power quality in industrial environments through reactive power compensation and harmonic current compensation, thus functioning as an active power filter. Additionally, it is worth highlighting its ability to handle voltage dips. In this regard, this paper contributes by providing an operational strategy for driving the induction machine during such transients. [ABSTRACT FROM AUTHOR]

The paper addresses rare issue in cable ampacity calculations, namely the presence of discontinuities along the routes. One which occurs in almost all cable installations is the presence of joints. In a standard cable rating analysis, the joints are ignored, mostly because of difficulties in building analytical models that represent the heat transfer phenomena within them. However, they can be a limiting part of the cable rating and, therefore, there is a need to model them correctly. This paper introduces an analytical algorithm for cable rating calculations in the presence of discontinuities with an emphasis on cable joints. New developments are illustrated by several numerical examples. [ABSTRACT FROM AUTHOR]

Dual-Active-Bridge (DAB) DC–DC converters are becoming increasingly favored for their efficiency in transferring electrical power across varying voltage levels. They are crucial in enhancing safety and reliability in various fields, such as renewable energy systems, electric vehicles, and the power supplies of electronic devices. This paper introduces a new control strategy for bidirectional isolated DAB DC–DC converters, implementing a Double Integral Super Twisting Sliding Mode Control (DI-STSMC) to accurately regulate the output voltage and current. The approach starts with a state-space representation to mathematically model the DAB converter. In light of model uncertainties and external disturbances, a robust DI-STSMC controller has been formulated to optimize the DAB converter's output performance. This method achieves zero steady-state error without chattering and provides a quick response to fluctuations in load and reference changes. The validity of the proposed technique is demonstrated through simulation results and a control hardware-in-the-loop (CHIL) experimental setup, using Typhoon HIL 606 and Imperix B-Box RCP 3.0 on a 230 W DAB converter. Furthermore, the paper offers a comparative analysis of the DI-STSMC with other control strategies, such as the proportional-integral (PI) controller, standard sliding mode control (SMC), and integral sliding mode control (ISMC). [ABSTRACT FROM AUTHOR]

Offshore wind farms (OWFs) play a crucial role in producing renewable energy in modern electrical power systems. However, to ensure that these facilities operate smoothly, they require robust control systems. As a result, this paper employed the newly developed Walrus Optimization algorithm (WaOA) to optimize the design parameters of fractional-order proportional-integral-derivative (FOPID) controllers in the power electronic interface circuits of the studied wind energy conversion system (WECS). In contrast to conventional optimization techniques like GA and PSO, the suggested approach proves more effective. The paper validates the WaOA application in optimizing FOPID controllers within a WECS comprising two, onshore and offshore, VSC stations at the two ends of an HVDC transmission system connecting OWFs to the mainland. The study shows that the WaOA outperforms GA and PSO, improving system stability and enabling quick recovery after disturbances. The study carried out using MATLAB/Simulink highlights the significance of newly recently introduced optimization techniques to ensure efficient and reliable operation of offshore wind energy systems, thereby expediting the transition to sustainable energy sources. [ABSTRACT FROM AUTHOR]

As a deep connection between agriculture and energy, the rural integrated energy system (RIES) is a micro-scale supply-distribution- storage-demand network, which provides an important means to realize the utilization of rural clean energy. This paper proposes a day-ahead scheduling model of the RIES to improve its economical effectiveness, where three energy carriers, namely, biogas, electric power, and heat, are integrated. To address the source and load uncertainties composed of photovoltaic power, power load, and heat load, this paper develops a constrained distributionally robust optimization (CDRO), which optimizes the cost expectation related to the extreme distribution to enhance the robustness, while limiting the loss of cost expectation in the historical distribution to ensure economical effectiveness. In addition, an ambiguous set of the source and load uncertainties incorporating 1-norm and infinity-norm constraints is established, which realizes a flexible adjustment for the conservativeness of CDRO. The distributionally robust dispatch is formulated as a deterministic programming in a two-stage solving framework, where the subproblem uploads its extreme probability distribution to the master problem, and these two problems are iteratively optimized until the convergence. Finally, the numerical simulations in a modern farm park prove the performance of the constructed dispatch model and the flexibility of CDRO in balancing the economical effectiveness and robustness of the dispatch. [ABSTRACT FROM AUTHOR]

The development of the automotive industry is associated with the rapid advancement of onboard systems. In addition, intensive development in the electronics and control systems industry has resulted in a change in the approach to the issue of assistance systems in vehicles. Classic hydraulic systems have been almost completely replaced by modern electric power steering (EPS) systems, especially in citizen vehicles. This paper focuses on fault detection algorithms for EPS, along with the available tools to aid development and verification. The article discusses in detail the current state of knowledge in this area. The principle of operation of the EPS system and the influence of the structure of the mechanical system on its operation, in particular the characteristics of the ground–tire contact, are presented. Various error identification methods are presented, including those based mainly on a combination of tests of real objects as well as those combined with modern hardware-in-the-loop (HIL) equipment and virtual vehicle environment software, enabling the development of new diagnostic methods, enhancing the security, reliability, and energy control in the vehicle. A review of the literature indicates that although many algorithms which enable fault detection at an early stage are described, their potential for use in a vehicle is highly limited. The reason lies in simplifications, including models and the operating EPS temperature range. The most frequently used simplification of the model is its linearization, which significantly reduces the calculation time; however, this significantly reduces the accuracy of the model, especially in cases with a large range of system operation. The need for methods to detect incipient faults is important for the safety and reliability of the entire car, not only during regular use but also especially during life-saving evasive maneuvers. [ABSTRACT FROM AUTHOR]

Featured Application: This paper proposes a method of monitoring the condition of three-phase asynchronous induction motors running with no load based on computer analysis of the instantaneous active electrical power. This paper experimentally reveals some of the resources offered by the instantaneous active electric power in describing the state of three-phase AC induction asynchronous electric motors (with a squirrel-cage rotor) operating under no-load conditions. A mechanical power is required to rotate the rotor with no load, and this mechanical power is satisfactorily reflected in the constant and variable part of instantaneous active electric power. The variable part of this electrical power should necessarily have a periodic component with the same period as the period of rotation of the rotor. This paper proposes a procedure for extracting this periodic component description (as a pattern by means of a selective averaging of instantaneous active electrical power) and analysis. The time origin of this pattern is defined by the time of a selected first passage through the origin of an angular marker placed on the rotor, detectable by a proximity sensor (e.g., a laser sensor). The usefulness of the pattern in describing the state of the motor rotor has been demonstrated by several simple experiments, which show that a slight change in the no-load running conditions of the motor (e.g., by placing a dynamically unbalanced mass on the rotor) has clear effects in changing the shape of the pattern. [ABSTRACT FROM AUTHOR]

In the development of the Power Industry Internet of Things, the security of data interaction has always been an important challenge. In the power-based blockchain Industrial Internet of Things, node data interaction involves a large amount of sensitive data. In the current anti-leakage strategy for power business data interaction, regular expressions are used to identify sensitive data for matching. This approach is only suitable for simple structured data. For the processing of unstructured data, there is a lack of practical matching strategies. Therefore, this paper proposes a deep learning-based anti-leakage method for power business data interaction, aiming to ensure the security of power business data interaction between the State Grid business platform and third-party platforms. This method combines named entity recognition technologies and comprehensively uses regular expressions and the DeBERTa (Decoding-enhanced BERT with disentangled attention)-BiLSTM (Bidirectional Long Short-Term Memory)-CRF (Conditional Random Field) model. This method is based on the DeBERTa (Decoding-enhanced BERT with disentangled attention) model for pre-training feature extraction. It extracts sequence context semantic features through the BiLSTM, and finally obtains the global optimal through the CRF layer tag sequence. Sensitive data matching is performed on interactive structured and unstructured data to identify privacy-sensitive information in the power business. The experimental results show that the F1 score of the proposed method in this paper for identifying sensitive data entities using the CLUENER 2020 dataset reaches 81.26%, which can effectively prevent the risk of power business data leakage and provide innovative solutions for the power industry to ensure data security. [ABSTRACT FROM AUTHOR]

Ensuring the swift and precise tracking of power system signal parameters, especially the frequency, is imperative for the secure and stable operation of power grids. In instances of faults within the distribution network, abrupt changes in frequency may occur, presenting a challenge for existing algorithms that struggle to effectively track such signal variations. Addressing the need for enhanced performance in the face of frequency mutations, this paper introduces an innovative approach--the Covariance Reconstruction Extended Kalman Filter (CREKF) algorithm. Initially, the dynamic signal model of electric power is meticulously analyzed, establishing a dynamic signal relationship based on high-precision time source sampling tailored to the signal model's characteristics. Subsequently, the filter gain, covariance matrix, and variance iteration equation are determined based on the signal relationship among three sampling points. In a final step, recognizing the impact of the covariance matrix on algorithmic tracking ability, the paper proposes a covariance matrix reset mechanism utilizing hysteresis induced by output errors. Through extensive verification with simulated signals, the results conclusively demonstrate that the CREKF algorithm exhibits superior measurement accuracy and accelerated tracking speed when confronted with mutating signals. [ABSTRACT FROM AUTHOR]

The article highlights various departments of the journal including the Industrial and Commercial Power Systems Department, the Industrial Power Conversion Systems Department and the Manufacturing Systems Development and Applications Department.

The coupling between modern electric power physical and cyber systems is deepening. An increasing number of users are gradually participating in power operation and control, engaging in bidirectional interactions with the grid. The evolving new power system is transforming into a highly intelligent socio–cyber–physical system, featuring increasingly intricate and expansive architectures. Demands for stable system operation are becoming more specific and rigorous. The new power system confronts significant challenges in areas like planning, dispatching, and operational maintenance. Hence, this paper aims to comprehensively explore potential synergies among various power system components from multiple viewpoints. It analyzes numerous core elements and key technologies to fully unlock the efficiency of this coupling. Our objective is to establish a solid theoretical foundation and practical strategies for the precise implementation of integrated planning and operation dispatching of source–grid–load–storage systems. Based on this, the paper first delves into the theoretical concepts of source, grid, load, and storage, comprehensively exploring new developments and emerging changes in each domain within the new power system context. Secondly, it summarizes pivotal technologies such as data acquisition, collaborative planning, and security measures, while presenting reasonable prospects for their future advancement. Finally, the paper extensively discusses the immense value and potential applications of the integrated planning and operation dispatching concept in source–grid–load–storage systems. This includes its assistance in regards to large-scale engineering projects such as extreme disaster management, facilitating green energy development in desertification regions, and promoting the construction of zero-carbon parks. [ABSTRACT FROM AUTHOR]

This paper introduces a novel hybrid filter topology that combines passive and active components to enhance harmonic filtering and resonance damping in electrical power systems. The design integrates a three-phase two-level voltage-source converter with a double-tuned passive filter in parallel, significantly reducing the power rating and operational costs while maintaining good harmonic filtering performance and reactive current compensation. Double-tuned passive filters, compared to single-tuned ones, offer improved harmonic attenuation at multiple frequencies, enhancing overall system efficiency. Moreover, when used with the proposed hybrid filter topology, the double-tuned version allows for even lower dimensions of the active part, thereby further reducing system cost. A state-feedback controller is designed to enhance the performance of the hybrid filter, proving particularly effective in environments with complex impedance conditions. This paper also examines the impact of variations in passive component parameters, demonstrating the design's robustness against potential deviations expected over the operational lifespan. The results indicate that the hybrid filter effectively mitigates harmonics and maintains operational stability under various transient conditions, as confirmed by analytical and simulation studies on a real industrial network model. These findings underline the hybrid filter's potential to significantly improve power quality in modern electrical networks. [ABSTRACT FROM AUTHOR]

The electric power sector is the primary contributor to carbon emissions in China. Considering the context of dual carbon goals, this paper examines carbon emissions within China's electricity sector. The research utilizes the LMDI approach for methodological rigor. The results show that the cumulative contribution of economies scale, power consumption factors and energy structure are 114.91%, 85.17% and 0.94%, which contribute to the increase of carbon emissions, the cumulative contribution of power generation efficiency and ratio of power dissipation to generation factor are -19.15% and -0.01%, which promotes the carbon reduction. The decomposition analysis highlights the significant influence of economic scale on carbon emissions in the electricity industry, among the seven factors investigated. Meanwhile, STIRPAT model, Logistic model and GM(1,1) model are used to predict carbon emissions, the average relative error between actual carbon emissions and the predicted values are 0.23%, 8.72% and 7.05%, which indicates that STIRPAT model is more suitable for medium- to long-term predictions. Based on these findings, the paper proposes practical suggestions to reduce carbon emissions and achieve the dual carbon goals of the power industry. [ABSTRACT FROM AUTHOR]

Integration of renewable energy sources (RES) to the grid in today's electrical system is being encouraged to meet the increase in demand of electrical power and also overcome the environmental related problems by reducing the usage of fossil fuels. Power Quality (PQ) is a critical problem that could have an effect on utilities and consumers. PQ issues in the modern electric power system were turned on by a linkage of RES, smart grid technologies and widespread usage of power electronics equipment. Unified Power Quality Conditioner (UPQC) is widely employed for solving issues with the distribution grid caused by anomalous voltage, current, or frequency. To enhance UPQC performance, Fractional Order Proportional Integral Derivative (FOPID) is developed; nevertheless, a number of tuning parameters restricts its performance. The best solution for the FOPID controller problem is found by using a Coati Optimization Algorithm (COA) and Osprey Optimization Algorithm (OOA) are combined to make a hybrid optimization CO-OA algorithm approach to mitigate these problems. This paper proposes an improved FOPID controller to reduce PQ problems while taking load power into account. In the suggested model, a RES is connected to the grid system to supply the necessary load demand during the PQ problems period. Through the use of an enhanced FOPID controller, both current and voltage PQ concerns are separately modified. The pulse signal of UPQC was done using the optimal controller, which analyzes the error value of reference value and actual value to generate pulses. The integrated design mitigates PQ issues in a system at non-linear load and linear load conditions. The proposed model provides THD of 12.15% and 0.82% at the sag period, 10.18% and 0.48% at the swell period, and 10.07% and 1.01% at the interruption period of non-linear load condition. A comparison between the FOPID controller and the traditional PI controller was additionally taken. The results showed that the recommended improved FOPID controller for UPQC has been successful in reducing the PQ challenges in the grid-connected RESs system. [ABSTRACT FROM AUTHOR]

With the increased complexity of power systems stemming from the connection of high-proportion renewable energy sources, coupled with the escalating volatility and uncertainty, the key transmission sections that serve as indicators of the power grid's security status are also subject to frequent changes, posing challenges to grid monitoring. The search method for key transmission sections based on an improved spectral clustering algorithm is proposed in this paper. A branch weight model, considering the impact of node voltage and power flow factors, is initially established to comprehensively reflect the electrical connectivity between nodes. Subsequently, a weighted graph model is constructed based on spectral graph theory, and an improved spectral clustering algorithm is employed to partition the power grid. Finally, a safety risk indicator is utilized to identify whether the partitioned sections are key transmission sections. Results from case studies on the IEEE39-node system and actual power grid examples demonstrate that the proposed method accurately and effectively searches for all key transmission sections of the system and identifies their security risks. The application in real power grid scenarios validates its ability to screen out some previously unrecognized key transmission sections. [ABSTRACT FROM AUTHOR]

An electrical power system is a network that facilitates the sourcing, transfer, and distribution of electrical energy. In the traditional power system, there are eleven types of faults that can occur in the system. This paper focuses on the classification of these faults over a stretch of 100 kilometres. The dataset used is synthetic and generated from a simulated model using MATLAB/Simulink software. Data augmentation is carried out during training to improve the accuracy of the classification. An indirect training approach through generative adversarial network (GAN) is used to classify these overhead transmission line faults. The random forest (RF) classification is used as the base learning model on the original dataset and it achieves accuracy of 84%. However, the base learner RF when used on GAN model generated augmented faulty data, it performs exceptionally well achieving 99% accuracy. One of the recent state-of-art methods is compared with this approach. [ABSTRACT FROM AUTHOR]

Being a vital component of electrical power systems, transformers significantly influence the system stability and reliability of power supplies. Damage to transformers may lead to significant economic losses. The efficient identification of transformer faults holds paramount importance for the stability and security of power grids. The existing methods for identifying transformer faults include oil chromatography analysis, temperature assessment, frequency response analysis, vibration characteristic examination, and leakage magnetic field analysis. These methods suffer from limitations such as limited sensitivity, complexity in operation, and a high demand for specialized skills. In this paper, we propose a method to identify external short-circuit faults of power transformers based on fault recording data on short-circuit currents. It involves analyzing the current signals of various windings during faults, extracting appropriate features, and utilizing a classification algorithm based on a support vector machine (SVM) to determine fault types and locations. The influence of different kernel functions on the classification accuracy of SVM is discussed. The results indicate that this method can proficiently identify the type and location of external short-circuit faults in transformers, achieving an accuracy rate of 98.3%. [ABSTRACT FROM AUTHOR]

This paper is aimed at performing a comprehensive review of the approaches employed in nanosatellite platforms, specifically 1 U and 3 U, for electrical power systems (EPS). Moreover, it seeks to develop a robust maximum power point tracking (MPPT) controller using the sliding mode control (SMC) method. The proposed control strategy is intended to monitor the solar panel's maximum power point (MPP) and adapt to changes in temperatures and solar irradiance in low Earth orbit (LEO). The EPS model, designed with the proposed sizing method, is built in MATLAB-Simulink and integrates a solar panel, battery storage, and power converters controlled by diverse MPPT methods. Then, simulation results demonstrate the effectiveness of the proposed SMC approach compared to other conventional control methods for the designed EPS under varying LEO conditions. To achieve a robust validation of the most appropriate MPPT control method under steady-state conditions, this paper presents an experimental investigation into the proposed EPS hardware design. The proposed SMC method achieved an increase in power generation from 10% to 12% for buck and boost power converters, respectively, compared to traditional control methods. [ABSTRACT FROM AUTHOR]

This document provides an overview of innovations in thermoelectric technology, with a focus on materials and applications. It discusses thermoelectric generators (TEGs), which convert thermal energy into electrical energy, and their versatility in various settings such as space, medical applications, and vehicles. The document also highlights advancements in thermoelectric materials, such as Cu2−xSe and PbTe0.7S0.3, which improve the efficiency of TEGs. The included research papers cover topics such as TEG design, durability under different conditions, and the development of nanostructured materials. The findings emphasize the need for further research and collaboration to enhance the efficiency and practicality of thermoelectric systems. [Extracted from the article]

The growing use of gas-fired power generators and electricity-driven gas compressors and storage has increased the interdependence between electric power infrastructure and natural gas infrastructure. However, the increasing interdependence may spread the failures from one system to the other, causing subsequent failures in an integrated power and gas system (IPGS). This paper investigates the structural vulnerability of a realistic IPGS based on complex network theory. Different from the existing works with a focus on the static vulnerability analysis for an IPGS, this paper considers both static and dynamic vulnerability analysis. The former focuses on vulnerability analysis under random and selective failures without flow redistribution, while the latter concentrates on vulnerability analysis under cascading failures caused by flow redistribution. Also, different from the existing works with a focus on the IPGS as a whole, we not only analyze the vulnerability of the IPGS but also analyze the vulnerability of the power subsystem (PS) and gas subsystem (GS), in order to understand how the vulnerability of the IPGS is affected by its PS and GS. The analysis results show that (1) if the PS and GS are more susceptible to cascading failures than selective and random failures, the IPGS as a whole is also more vulnerable to cascading failures. (2) There are different dominant factors affecting the IPGS vulnerability under cascading failures and selective failures. Under cascading failures, the GS has a more significant impact on the IPGS vulnerability; under selective failures, the PS has a more important impact on the IPGS vulnerability. (3) The IPGS is more vulnerable to failures on the critical nodes, which are identified from the IPGS as a whole rather than from the individual PS or GS. The results provide insights into the design and planning of IPGSs to improve their overall reliability. [ABSTRACT FROM AUTHOR]

Insulators are an important part of transmission lines in active distribution networks, and their performance has an impact on the power system's normal operation, security, and dependability. Traditional insulator detection methods, on the other hand, necessitate a significant amount of labor and material resources, necessitating the development of a new detection method to substitute manpower. This paper investigates the abnormal condition detection of insulators based on UAV vision sensors using artificial intelligence algorithms from small samples. Firstly, artificial intelligence for the image data volume requirements was large, i.e., the insulator image samples taken by the UAV vision sensor inspection were not enough, or there was a missing image problem, so the data enhancement method was used to expand the small sample data. Then, the YOLOV5 algorithm was used to compare detection results before and after the extended dataset's optimization to demonstrate the expanded dataset's dependability and universality, and the results revealed that the expanded dataset improved detection accuracy and precision. The insulator abnormal condition detection method based on small sample image data acquired by the visual sensors studied in this paper has certain theoretical guiding significance and engineering application prospects for the safe operation of active distribution networks. [ABSTRACT FROM AUTHOR]

The state of New York admitted 143 million metric tons of carbon emissions from fossil fuels in 2020, prompting the ambitious goal set by the CLCPA to achieve carbon neutrality. The paper focused on analyzing and predicting carbon emissions using four different machine-learning algorithms. It examined emissions from fossil fuel combustion from 1990 to 2020 and validated four different algorithms to choose the most effective one for predicting emissions from 2020 to 2050. The analysis covered various economic sectors including transportation, residential, commercial, industrial, and electric power. By analyzing policies, the paper forecasted emissions for 2030 and 2050, leading to the identification of different pathways to reach carbon neutrality. The research concluded that in order to achieve neutrality, radical measures must be taken by the state of New York. Additionally, the paper compared the most recent data for 2021 with the forecasts, showing that significant measures need to be implemented to achieve the goal of carbon neutrality. Despite some studies assuming a trend of decreased emissions, the research revealed different results. The paper presents three pathways, two of which follow the ambitious plan to reach carbon neutrality. As a result, the emission amount by 2050 for the different pathways was projected to be 31.1, 22.4, and 111.95 of MMt CO2 e, showcasing the need for urgent action to combat climate change. [ABSTRACT FROM AUTHOR]

Hybrid power supply systems (HPSSs) are considered as a good option for electric power supply of remotely located from the grid consumers due to significant fuel savings compared to diesel sets. Quick development and improvement of HPSSs may be achieved using specialized methodologies and programs. In the paper a schematic diagram is proposed and operation principles of a 400 V / 50 Hz HPSS were developed. The system’s main component is the master generating unit of the hydropower plant using a 250 kW induction generator (IG). The voltage of the system is controlled by the controller of the AC/DC power converter. The electrical frequency of the system is controlled by the speed controller of the hydropower turbine. A wind turbine, an energy storage system and a regulated dump load are connected to the IG through the AC/DC converter. Goal. The paper aims to develop a methodology for steady state performance analysis of the hydraulic turbine driven isolated IG operating in parallel through an AC/DC power converter with additional sources and consumers of active power. Methodology. The methodology for evaluation of performance characteristics of the IG operating in the proposed system has been developed. The methodology is based on the equivalent circuit of the system, equations of active and reactive power balance in the system and the superposition method. Results. The equations of frequency, voltage and power regulators of the system are given. The performance characteristics of the IG operating in the system supplying resistive and RL load in «constant voltage – constant frequency» mode are obtained. Novelty. The developed methodology is innovative in taking into account the control algorithms of the system. The comparative analysis of the IG’s performance operating in the stand-alone generating unit and in the generating unit connected to the proposed system is performed. Practical value. The developed methodology can be used for development and performance improvement of hybrid AC power systems. References 19, table 1, figures 4. [ABSTRACT FROM AUTHOR]

This paper is dedicated to optimizing the functionality of Microgrid-Integrated Charging Stations (MICCS) through the implementation of a new control strategy, specifically the fractional-order proportional-integral (FPI) controller, aided by a hybrid optimization algorithm. The primary goal is to elevate the efficiency and stability of the MICCS-integrated inverter, ensuring its seamless integration into modern energy ecosystems. The MICCS system considered here comprises a PV array as the primary electrical power source, complemented by a proton exchange membrane fuel cell as a supporting power resource. Additionally, it includes a battery system and an electric vehicle charging station. The optimization model is formulated with the objective of minimizing the integral of square errors in both the DC-link voltage and grid current while also reducing total harmonic distortion. To enhance the precision of control parameter estimation, a hybrid of the one-to-one optimizer and sine cosine algorithm (HOOBSCA) is introduced. This hybrid approach improves the exploitation and exploration characteristics of individual algorithms. Different meta-heuristic algorithms are tested against HOOBSCA in different case studies to see how well it tunes FPI settings. Findings demonstrate that the suggested method improves the integrated inverters' transient and steady-state performance, confirming its improved performance in generating high-quality solutions. The best fitness value achieved by the proposed optimizer was 3.9109, outperforming the other algorithms investigated in this paper. The HOOBSCA-based FPI successfully improved the response of the DC-link voltage, with a maximum overshooting not exceeding 8.5% compared to the other algorithms employed in this study. [ABSTRACT FROM AUTHOR]

This paper is an attempt to provide a dual-source inverter, an intelligent inverter topology that links two isolated DC sources to a single three-phase output through single-stage conversion. The converter is designed to be utilized in hybrid photovoltaic fuel cell systems, among other renewable energy applications. The proposed dual-source inverter employs a single DC-AC converter, as opposed to conventional dual-source hybrid inverters which make use of several input DC-DC modules to obtain the voltage formed across the inverter's input DC-link. In the proposed topology, the semiconductor count is low, which leads to improved efficiency, cost, complexity, and reliability. The proposed topology makes use of two impedance networks connected by transformers, diodes, and capacitors. The regulation of the electrical power generated by primary sources and the independence of the converter on key factors like voltage and frequency are essential parameters in multi-input converters. This feature becomes highly prominent when the control algorithm is implemented by conventional processors. Viewed from this perspective, the control method described in this paper is worthy of consideration. The research work describes a 220-W/50 Hz prototype that employs Simple Boost-SPWM. Experimental results verify the analyses and corroborate the satisfactory performance of the suggested converter. [ABSTRACT FROM AUTHOR]

Modern electrical power systems are characterized by a high rate of transient processes, the use of digital monitoring and control systems, and the accumulation of a large amount of technological information. The active integration of renewable energy sources contributes to reducing the inertia of power systems and changing the nature of transient processes. As a result, the effectiveness of emergency control systems decreases. Traditional emergency control systems operate based on the numerical analysis of power system dynamic models. This allows for finding the optimal set of preventive commands (solutions) in the form of disconnections of generating units, consumers, transmission lines, and other primary grid equipment. Thus, the steady-state or transient stability of a power system is provided. After the active integration of renewable sources into power systems, traditional emergency control algorithms became ineffective due to the time delay in finding the optimal set of control actions. Currently, machine learning algorithms are being developed that provide high performance and adaptability. This paper contains a meta-analysis of modern emergency control algorithms for power systems based on machine learning and synchronized phasor measurement data. It describes algorithms for determining disturbances in the power system, selecting control actions to maintain transient and steady-state stability, stability in voltage level, and limiting frequency. This study examines 53 studies piled on the development of a methodology for analyzing the stability of power systems based on ML algorithms. The analysis of the research is carried out in terms of accuracy, computational latency, and data used in training and testing. The most frequently used textual mathematical models of power systems are determined, and the most suitable ML algorithms for use in the operational control circuit of power systems in real time are determined. This paper also provides an analysis of the advantages and disadvantages of existing algorithms, as well as identifies areas for further research. [ABSTRACT FROM AUTHOR]

The relentlessly depleting fossil-fuel-based energy resources worldwide have forbidden an imminent energy crisis that could severely impact the general population. This dire situation calls for the immediate exploitation of renewable energy resources to redress the balance between power consumption and generation. This manuscript confers about energy management tactics to optimize the methods of power production and consumption. Furthermore, this paper also discusses the solutions to enhance the reliability of the electrical power system. In order to elucidate the enhanced reliability of the electrical system, microgrids consisting of different energy resources, load types, and optimization techniques are comprehensively analyzed to explore the significance of energy management systems (EMSs) and demand response strategies. Subsequently, this paper discusses the role of EMS for the proper consumption of electrical power considering the advent of electric vehicles (EVs) in the energy market. The main reason to integrate EVs is the growing hazards of climate change due to carbon emissions. Moreover, this paper sheds light on the growing importance of artificial intelligence (AI) in the technological realm and its incorporation into electrical systems with the notion of strengthening existing smart grid technologies and to handle the uncertainties in load management. This paper also delineates the different methodologies to effectively mitigate the probability of facing cyber-attacks and to make the smart grids invulnerable. [ABSTRACT FROM AUTHOR]

Copyright of Military Technical Courier / Vojnotehnicki Glasnik is the property of Military Technical Courier / Vojnotehnicki Glasnik and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper presents the results of investigations into modeling the DC and dynamic characteristics of an alkaline electrolyzer. A model of the device under consideration is proposed in the form of analytical relationships in which the coefficients depend on the concentration of the potassium hydroxide solution contained in the electrolyzer under consideration. The correctness of the proposed model is verified by comparing the calculated and measured current–voltage characteristics and the dependence of the module of the impedance of the electrolyzer on the frequency obtained at different values of the electrolyte concentration. The dependence of the time needed to produce a given portion of hydrogen on the supply current and the electrolyte concentration is also presented. Good compliance with the calculation and measurement results is obtained over a wide range of voltage and current, frequency, and concentration of the electrolyte. [ABSTRACT FROM AUTHOR]