Search

Digital Twins (DTs) hold significant promise in addressing the challenges faced by food supply chains (FSCs). This paper aims to provide critical insights into the potential for Digital Twins to meet the key challenges of the FSC and establish a comprehensive conceptual framework for their implementation. Following a systematic literature review (SLR), the study identified 81 peer-reviewed, high-quality papers published over the last decade (2012–2023). The typology-driven thematic analysis emphasises the emergent nature of DTs within FSCs, highlighting their key characteristics including monitoring, real-time simulation, and scenario analysis. The identified characteristics, applications, implementation drivers and barriers of Digital Twin form the basis for a novel conceptual framework for implementing DTs in FSCs. Leveraging insights from Innovation Adoption Theory and the Technology-Organization-Environment (TOE) framework, the study outlines a structured five step implementation process divided into three stages. Notably, technology assessment and performance evaluation emerge as two innovative steps necessary for the successful implementation of DTs specifically, not previously considered by the theory. The study identifies promising avenues for future research. These findings provide invaluable guidance to researchers and practitioners seeking to embrace the potential of Digital Twin within the food industry. [ABSTRACT FROM AUTHOR]

The increasing complexity of industrial systems demands more effective and intelligent maintenance approaches to address manufacturing defects arising from faults in multiple asset modules. Traditional digital twin (DT) systems, however, face limitations in interoperability, knowledge sharing, and causal inference. As such, cognitive digital twins (CDTs) can add value by managing a collaborative web of interconnected systems, facilitating advanced cross-domain analysis and dynamic context considerations. This paper introduces a CDT system that leverages industrial knowledge graphs (iKGs) to support maintenance planning and operations. By employing a design structure matrix (DSM) to model dependencies and relationships, a semantic translation approach maps the knowledge into a graph-based representation for reasoning and analysis. An automatic solution generation mechanism, utilising graph sequencing with Louvain and PageRank algorithms, derives feasible solutions, which can be validated via simulation to minimise production disruption impacts. The CDT system can also identify potential disruptions in new product designs, thus enabling preventive actions to be taken. A case study featuring a print production manufacturing line illustrates the CDT system's capabilities in causal inference and solution explainability. The study concludes with a discussion of limitations and future directions, providing valuable guidelines for manufacturers aiming to enhance reactive and predictive maintenance strategies. [ABSTRACT FROM AUTHOR]

Nowadays many processes in the food industry are monitored in an automatic way, with the purpose of minimising the need for workforce and of ensuring the proper control of the quality and safety of the foodstuff. All the sensors share data with a centralised management unit, where often a Manufacturing Execution System collects and evaluates them. As reported in recent research, however, a further step that can be undertaken, exploiting Industry 4.0 enabling technologies, is the implementation of digital twin approaches, with the additional aim to prevent possible issues during production. In line with these considerations, this work aims at showing two different digital twin models intended for improving the control of as many real food systems. Liquid and powder fluids are taken as examples for highlighting the differences in the optimization of the two food processes, as well as for fully exploring the potential of the digital twin approach. Finally, based on the real data taken from two pilot plants, a framework for the selection of the best digital twin tool in the food sector is delineated. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to explore adaptation-based and stability-based views of supply chain resilience to analyse what insights these different perspectives, individually and collectively, offer for theory and practice. In the stability-based view, resilience is triggered by disruptions and performance deviationsto return to some 'normal' states. This view accounts for known-known uncertainty. The adaptation-based view shifts the focus from avoiding oscillations and recovering some stable states toward proactive adaptation and performance persistence. The adaptation-based view aims at designing structurally adaptable networks with process flexibility and actively used redundancy. It considers resilience from the value-creation perspective accounting for unknown-unknown uncertainties. Stability-based approach views resilience as an outcome or quantity. Adaptation-based approach considers resilience as a property or quality. A combination of stability- and adaptationbased approaches is imperative for building a strong supply chain immunity through an integration of general protection and adaptability. These approaches complement each other depending on the knowledge of and attitude to uncertainty by decision-makers. A combination of the two views helps consider resilience both as a quantity to measure how sick the supply chain is and to understand how the resilience comes about to ensure the quality of the network health and viability. [ABSTRACT FROM AUTHOR]

Photogrammetry systems are widely used in industrial manufacturing applications as an assistance measurement tool. Not only does it provide high-precision feedback for assembly process inspection and product quality assessment, but also it can improve the flexibility and robustness of manufacturing systems and production lines. However, with growing global competition and demands, companies are forced to enhance production efficiency, shorten production lifecycle and increase product variety by incorporating reconfigurable factory design that can meet challenging timeline and requirements. Although dynamic facility layout is widely investigated, the position selection for the photogrammetry system in dynamic manufacturing environment is usually overlooked. In this paper, dynamic layout of the V-STARS photogrammetry system is investigated and optimised in a digital-twin environment using deep reinforcement learning. The learning objectives are derived from the field of view (FoV) evaluation from point clouds 3D reconstruction, and collision detection from the digital twin simulated in Visual Components. The application feasibility of the proposed dynamic layout optimisation of the V-STARS photogrammetry system is verified with a real world industrial application. [ABSTRACT FROM AUTHOR]

Rapid advances in new-generation information technologies have been the main driving force for the transformation of manufacturing enterprises in Industry 4.0. Digital twin (DT), as a key technology to promote intelligent manufacturing, has shown great potential for manufacturing enterprises to create an industrial intelligence-driven production equipment through in-depth integration of cyber-physical systems. However, the lack of a systematic effective DT modelling method with a supporting evaluation metric is the most important factor restricting the application of DT in manufacturing enterprises. To bridge the gap, this paper proposes a novel multi-level modelling and fidelity evaluation (MLM&FE) method of DT for creating smart production equipment in manufacturing enterprises, which could help enterprises establish an industrial intelligence-driven production environment to quickly respond to changes in the customised global market, thus greatly improving competitiveness of the enterprises. Specifically, this paper firstly designs a reference framework for DT-enhanced smart production equipment, on which an MLM&FE architecture is proposed. Then, key implementation methodologies and tools for MLM&FE are introduced from the perspective of data space modelling, virtual space modelling, knowledge space modelling, model integration and evaluation. Finally, the developed smart production equipment prototype demonstrates the feasibility and effectiveness of DT MLM&FE. [ABSTRACT FROM AUTHOR]

Supply chains operate in a highly distuptive environment where a SC master plan should be updated in line with disruptions to ensure that a high service level is provided to customers while total cost is minimised. There is an absence of knowledge of how a SC master plan should be updated to cope with disruptions using hybrid modelling. To fill this gap, we present a hybrid modelling framework to update a SC master plan in presence of disruptions. The proposed framework, which is a precursor to a SC digital twin, integrates simulation, machine learning, and optimisation to identify the production, storage, and distribution values that maximise SC service level while minimising total cost under disruptions. This approach proves effective in a SC disrupted by demand increase and lead time extension. Results show that employing hybrid modelling leads to a noticeable improvement in service level and total cost. The outcome of the new knowledge on using hybrid modelling for managing disruptions provides essential learning for the extension of modelling through a digital twin for SC master planning. We observe that in the presence of disruptions it is more economical to keep higher inventory at downstream SC members than the upstream SC members. [ABSTRACT FROM AUTHOR]

Production systems have to be adapted continuously to changing circumstances. This means that the responsible production planner has to frequently make decisions about reconfiguring complex systems under uncertainty whose outcome greatly affects the company's business success. Discrete-event simulation is one powerful tool to support the necessary analysis and scenario evaluation, but still remains time-consuming and tricky to set up and to maintain. When implemented as a digital twin of the production system, the simulation model can maintain a high degree of accuracy over a long time period. An approach to realise this potential is presented and illustrated in this paper with a use case from the automotive industry. This paper contributes several new methods and findings to the development of digital twins of production systems: Firstly, it demonstrates how exceptional events in the validation of the digital twin can be handled. Secondly, it shows how structural changes in the system can be discovered using data on machine activity and process mining. Thirdly, the paper introduces a possibility on how to assess the accuracy of the digital twin. Furthermore, it demonstrates how to assess the robustness of the digital twin to estimation errors in machine processing times. [ABSTRACT FROM AUTHOR]

The adoption of simulation models as Digital Twins (DTs) has been standing out in recent years and represents a revolution in decision-making. In this context, we note increasingly faster and more efficient decisions by mirroring the behaviour of physical systems. On the other hand, we highlight the challenges to ensure the simulation models validity over time since traditional validation approaches have limitations when we consider the periodic update of the model. Thus, the present work proposes an approach based on the constant assessment of these models through Machine Learning and control charts. To this end, we suggest a monitoring tool using the K-Nearest Neighbors (K-NN) classifier, combined with a p-control chart, to periodically assess the validity of DT simulation models. The proposed approach was tested in several theoretical cases and also implemented in a real case study. The findings suggest that the proposed tool can monitor the DT functioning and identify possible special causes that could compromise its results. Finally, we highlight the wide applicability of the proposed tool, which can be used in different DT models, including near/real-time models with different characteristics regarding connection, integration, and complexity. [ABSTRACT FROM AUTHOR]

Digital twins became of greater interest to researchers and practitioners in supply chain and operations management (SCOM). Literature has addressed the need to understand digital twins in SCOM, mostly focusing on fragmented technological solutions and use cases. We start with an integrative literature review to determine which elements belong to research on digital twins in SCOM. We define the seven major elements of a digital twin in SCOM: technology, people, management, organisation, scope, task, and modelling. We also distinguish five major types of digital twins in SCOM: product, process, organisation, supply chain and network-of-networks. Illustration of a SCOM digital twin is provided using an anyLogistix example. We conclude that digital twins in SCOM are not merely a simulation-based replica of a real object but a complex socio-technical phenomenon involved in continuous human-artificial intelligence interactions. This leads to an understanding of the role of digital twins through the lens of Industry 5.0, reconfigurable and viable supply chains. Researchers and practitioners alike can use our framework to structure the knowledge on SCOM digital twins and consider all seven elements when designing and using digital twins. [ABSTRACT FROM AUTHOR]

High quality, safe, and reliable batteries are essential for widespread adoption of electric vehicles. Current Li-ion battery pack manufacturing processes rely on manual inspections to ensure electric vehicle battery quality. Such manual quality control is prone to errors, increasing the chances of defective batteries. This is likely to increase safety and reliability concerns in the public imagination, slowing down the adoption of electric vehicles. Furthermore, manual inspection is time-consuming and likely to become a bottleneck in scaling up electric vehicle battery production. A potential solution to address this need for fast and accurate inspection of batteries is the use of machine vision and robotics. In this study, we use digital twin design and simulation to develop a battery module inspection system that uses cobots and machine vision to inspect electric vehicle batteries for defects. Our proposed system can automate visual quality checks that are currently being done by human operators. The proposed cobotic system has been simulated and validated for a variety of battery defects to achieve fast and reliable detection. Since a digital twin of the cobotic inspection workcell has been used, the battery inspection system, as designed and validated, is ready for immediate implementation. [ABSTRACT FROM AUTHOR]

As electric vehicle adoption accelerates and demand increases, the inability to produce batteries in sufficient quantities has emerged as a critical bottleneck in the electric vehicle supply chain. Given the impending climate change crisis, resolving this bottleneck is imperative to accelerate the transition to a zero-emission electric mobility future. One potential solution is the use of robotics for fast and cost-effective assembly of batteries at scale. This study proposes a three-stage digital twin design and analysis method to develop robotic workcells for fast and cost-effective assembly of electric vehicle battery modules. Using digital twin design and simulation, robotic assembly line configurations have been developed for battery module production at different scales. Digital twin analytics was used to evaluate and optimise the proposed robotic battery assembly system for speed and cost. Industrial automation experts were consulted to further improve robotic work cell layouts to minimise investment in robots. Because digital twins of robotic workcells have been used, the configurations of the battery assembly line, as designed and validated, are ready for immediate implementation. For practitioners, this study offers heuristic methods to determine the appropriate assembly line configuration, the required number of robots and humans, for a desired production volume. For researchers, this study outlines promising areas for future investigation. [ABSTRACT FROM AUTHOR]

The paper describes a smart model for palletising as main intra-logistics task for product-on-pallet distribution, and its development in Logistics 4.0 framework aligned to Industry 4.0. The model is developed in holonic paradigm as a 2-layer Holonic Logistics Execution System (HLES) in semiheterarchical topology. Scheduling of logistics activities and allocation to resources are optimised for global efficiency on compact time periods. The logistics model virtualises physical entities: resources, pallets and orders as holons implemented with digital twin software, and categories of task workloads: resource health monitoring, dispatching and tracking pallet orders, re-assigning jobs at resource failure, which grants reality-awareness and robustness. Global workload optimisation uses Constraint Programming as decision making technology with ILOG optimiser engine as situation-specific solver tool in SaaS cloud model, and delegate multi-agent system (MAS) technology for intelligence distribution. The optimised objective function is a combination of palletising cost weighted by robot speed limits and pallet storage cost in payable stocks. The main constructs are exemplified and validated on a real-life structure with multiple palletising resources in which programmable logic controllers (PLC) coordinate locally the parallel execution of order holons according to their globally optimised sequence. [ABSTRACT FROM AUTHOR]

In recent years, the emerging Digital Twin (DT) paradigm under Industry 4.0 has been attracting more attention from both practitioners and academia due to its dynamic capabilities. Most DT studies are theoretical and deal with hypothetical analysis, whereas fewer studies are available on real-life empirical cases. Due to dynamic problem-solving capabilities, DT technologies are widely used in performance improvement analysis in food processing companies (FPC) despite limited implication's for business strategies. Our study incorporates the DT technologies with an implementation case study on FPC and accomplishes the real-life problem of the food processing company (FPC). Moreover, the proposed DT research framework demonstrates the various DT implementation stages, such as strategic mapping and physical-virtual space replica, with rigorous analysis. The results show that DT enhances the existing system's machine availability, allocation efficiency, technical efficiency, worker efficiency, utilization rate, effectiveness, step ratio, and throughput rate. The proposed physical-virtual interface model is executed using AnyLogic software with JAVA-enabled programming. [ABSTRACT FROM AUTHOR]

Numerous studies have focused on digital twins (DTs) and their applications. However, a common method for evaluating the performance of DTs is lacking. Digital twins performance assessment mechanism is crucial when improving or monitoring any process or system in a business, such a strategy could serve as a guide to help researchers and practitioners create more effective digital twins. Guided by these challenges, we propose a structured method for measuring the performance and flexibility of digital twins, and our study provides a procedure for quantitative calculation of the performance of DTs based on four key performance indicators (KPIs). Moreover, we propose a new KPI, DTflex, for determining the flexibility of digital twins. We evaluated the performance of DTflex as a KPI to demonstrate its use as a simple tool for designers and practitioners to quickly compare different DT methodologies, which might provide valuable input for the iterative improvement of DTs to increase their efficiency in future applications. The knowledge provided along with the method proposed in this paper is expected to help researchers and practitioners working in different fields to compare DT methodologies and DT performance which will lead to higher efficiency DT solutions and increased re-usage of existing DTs. [ABSTRACT FROM AUTHOR]

The Industry 4.0 revolution is changing the manufacturing landscape. A broad set of new technologies emerged (including software and connected equipment) that digitise manufacturing systems. These technologies bring new vitality and opportunities to the manufacturing industry, but they also bring new challenges. This paper focuses on the impact of Industry 4.0 on production planning approaches and software. We first propose a digital twin framework that integrates production planning systems and frontier technologies. The frontier technologies that may impact production planning software are the internet of things, cloud manufacturing, blockchain, and big data analytics. Second, we provide a state-of-the-art on the application of each technology in the production planning, as well as a detailed analysis of the benefit and application status. Finally, this paper discusses the future research and application directions in the production planning. We conclude that Industry 4.0 will lead to the construction of data-driven models for production planning software. These tools will include models built accurately from data, account for uncertainty, and partially actuate the decision autonomously. [ABSTRACT FROM AUTHOR]

Data has become a high-value commodity in manufacturing. There is a growing realisation that the data-driven applications could become strong differentiators of manufacturing enterprises. To guide the developments in digitisation, a widely accepted framework is needed. In the absence of the universal framework, the components making a digital enterprise are captured in an example framework that is introduced in the paper. The adoption of new technology and software solutions has increased complexity of manufacturing systems. In addition, new product introductions have become more frequent and the demand more variable. A digital space enables optimisation and simulation of decisions before their realisation in the physical space. Predictive modelling with its time dimension is a valuable actor in the digital space. Three challenges of predictive modelling such as model complexity, model interpretability, and model reuse are identified in this paper. The coverage of each challenge in the literature is illustrated with the recently published papers. The main aspects of these challenges and the synthesis of the developments in digital manufacturing are articulated in the form of eight observations that could guide the future research. [ABSTRACT FROM AUTHOR]

In this paper, we analyze the literature concerning the implementation of digital twins (DTs) for zero-defect manufacturing (ZDM) following a systematic method and, guided by a preliminary finding that a structured and standardised approach to the development of the DT applications is lacking, we provide a standardised design methodology to guide researchers and practitioners in their efforts to develop DTs regardless of the domain. After examination and interpretation of the literature, we also present the results of our state-of-the-art analysis, discuss the current state and limitations of research and practice, and provide useful insights on this important and complex topic. The design methodology proposed in our study will benefit both practitioners and academicians by covering the essential elements to be considered when developing DTs for ZDM for any applications in this domain. The study also contributes to knowledge by presenting a structured overview of the specific research area with a comprehensive, systematic, and critical analysis of the literature and by providing answers to some fundamental questions in the context of DTs for ZDM. Finally, we provide suggestions for further developments in research and practice. [ABSTRACT FROM AUTHOR]

Supply chains (SCs) operate in a highly disruptive environment, where they face a variety of disruptions in product and cash flows. In such an environment, determining suitable inventory and cash replenishment policies ensures that cash and inventory are at the right place at the right time and provides a productive SC with high customer service levels. In this study, we first examine the impact of the disruptions in physical and financial flows on SC performance. We then, investigate the potential of a SC digital twin framework to help decision-makers in managing inventory and cash throughout the SC during disruption, currently absent from the literature. The proposed SC digital twin framework integrates machine learning (ML) and simulation to identify the inventory and cash replenishment policies that minimise the impact of the disruptions on SC performance. This approach proves effective in a SC disrupted by demand increase, capacity reduction, and credit purchase increase. Results show that employing the SC digital twin leads to a noticeable reduction in the cash conversion cycle for upstream members of the SCs. We observe that the cash conversion cycle for the upstream SC members is greatly impacted by the inventory policy employed by their immediate downstream members. [ABSTRACT FROM AUTHOR]

Decentralized periodic event‐triggered control can reduce the working time and data transmissions in the sensor nodes for feedback control loops, making it suitable for wireless networked control systems, especially those with large physical scales, such as smart water distribution systems. However, the design of this control approach requires accurate system model, which is normally difficult to obtain. In this work, we assume a digital twin of the original system can be obtained by some modeling and simulation tools, for example, Simscape in MATLAB/Simulink for water distribution systems, and thus present an event‐triggered controller design approach. We first present the design of such an event‐triggered controller for the digital twin; and then analyze the condition under which if both the original system and its digital twin can be satisfied, the same controller can work for the original system and some type of stability can be guaranteed at the same time. The proposed approach is applied in a smart water distribution system to show the feasibility. [ABSTRACT FROM AUTHOR]

PurposeMethodsResultsConclusionThe study explores the evolving landscape of cataract diagnosis, focusing on both traditional methods and innovative technological integrations. It aims to address challenges with subjectivity in traditional cataract grading and to evaluate how new technologies can enhance diagnostic accuracy and accessibility.The research introduces and examines the use of Artificial Intelligence (AI), Machine Learning (ML), and Deep Learning (DL) in automating and improving cataract screening processes. It also explores the role of the Metaverse, Digital Twins, and Teleophthalmology for immersive patient education, real-time virtual replicas of eyes, and remote access to specialized care.Various ML and DL techniques demonstrated significant accuracy in cataract detection. The integration of these technologies, along with the Metaverse, Digital Twins, and Teleophthalmology, provides a comprehensive framework for accurate and accessible cataract diagnosis.There is a notable paradigm shift toward individualized, predictive, and transformative eye care. The advancements in technology address existing diagnostic challenges and mitigate the shortage of ophthalmologists by extending high-quality care to underserved regions. These developments pave the way for improved cataract management and broader accessibility. [ABSTRACT FROM AUTHOR]

Vaccine manufacturing fosters the prevention, control, and eradication of infectious diseases. Recombinant DNA and in vitro (IVT) mRNA vaccine manufacturing technologies were enforced to combat the recent pandemic. Despite the impact of these technologies, there exists no scientific announcement that compares them. Digital Shadows are employed in this study to simulate each technology, investigating root cause deviations, technical merits, and liabilities, evaluating cost scenarios. Under this lens we provide an unbiased, advanced comparative technoeconomic study, one that determines which of these manufacturing platforms are suited for the two types of vaccines considered (monoclonal antibodies or antigens). We find recombinant DNA technology to exhibit higher Profitability Index due to lower capital and starting material requirements, pertaining to lower Minimum Selling Price per Dose values, delivering products of established quality. However, the potency of the mRNA, the streamlined and scalable synthetic processes involved and the raw material availability, facilitate faster market penetration and product flexibility, constituting these vaccines preferable whenever short product development cycles become a necessity. [ABSTRACT FROM AUTHOR]

Against the backdrop of smart grid development, the electric power system demands higher accuracy and comprehensiveness in fault analysis. Establishing a digital twin platform for multiple equipment faults represents the future direction of power system development. Presently, while many researchers employ artificial intelligence algorithms to diagnose faults in key equipment such as transmission lines and transformers, intelligent diagnostic methods for busbar faults remain insufficient. Therefore, this paper proposes a busbar fault diagnosis method based on multi-source information fusion. Initially, the diagnostic method for busbar faults is explored, conducting both time-domain and frequency-domain analyses on simulated fault data. The data of this model are optimized using Dempster-Shafer evidence theory to enhance algorithm training speed. Subsequently, BP neural network training is implemented. Finally, validation testing of fault data demonstrates a fault recognition accuracy of 99.1% for this method. Experimental results illustrate the method's feasibility and low computational costs, thereby advancing the development of digital twin platforms for power system fault diagnosis. [ABSTRACT FROM AUTHOR]

Multi-scale modelling techniques are commonly used to characterize heterogeneous rock samples. However, open challenges limit the efficiency of these models. A significant issue is the tradeoff between resolution and field of view (FoV) during imaging. Capturing an image of a heterogeneous rock sample that includes pores of different scales with a large FoV is impossible. Various novel approaches have attempted to solve this problem, but they have inherent limitations such as unrealistic results and high computational costs. In this study, we propose a novel method to generate 3D multiscale images of two heterogeneous rock samples: Berea sandstone and Edward Brown carbonate. We scanned both samples at low and high (HR) resolutions using X-ray microtomography. Our approach involves distinct reconstruction of resolved and unresolved porosity in rock images at lower resolutions. We divide the unresolved porosity into smaller sections, called unresolved templates, using the watershed algorithm to reduce memory allocation. The cross-correlation based simulation approach then finds a suitable replacement template from the HR images, which contain a significant number of micro-pores, using a modified overlap region selection procedure in 3D. We compare the geometrical and petrophysical properties of the reconstructed multi-scale images with those of the HR rock images. The results show good agreement with the HR image properties computed from the direct numerical simulation approach. Additionally, our thus validated method is two to four times faster in constructing multi-scale images. Article Highlights: An efficient multi-scale image reconstruction approach for heterogeneous rock samples Utilize watershed algorithm to reduce memory consumption and increase run time Improve accuracy of image reconstruction by considering different overlap area [ABSTRACT FROM AUTHOR]

Obtaining real-time physical field data inside the boiler furnace is crucial for combustion diagnostics and optimization. In this work, we propose a fast reconstruction technique for the physical fields in a tangentially-fired coal boiler. The method combines the Proper Orthogonal Decomposition (POD) and Conditional Deep Convolutional Generative Adversarial Networks (cDCGAN) based on the boiler physical field obtained by computational fluid dynamics (CFD). Firstly, CFD simulations are performed using data from the boiler Distributed Control System (DCS). After verifying the CFD results, we expanded the simulation to 105 operational condition cases sample sets. Then, the physical fields of the sample set undergo POD to determine the appropriate number of POD bases, thereby ensuring the accuracy of the reconstruction. Finally, the cDCGAN method is employed to establish the correlation between the POD bases and the operational conditions of the boiler. Results show that the POD-cDCGAN method achieves rapid and accurate reconstruction of temperature and velocity fields, with mean relative error (MRE) below 1.5% and root relative squared error (RRSE) below 5.7%. The reconstruction time is reduced to 10.57s, significantly faster than direct CFD methods. The POD-cDCGAN method offers an efficient approach for online operational diagnosis and digital twin construction of boiler equipment. [ABSTRACT FROM AUTHOR]

In continuous powder handling processes, precise and consistent feeding is crucial for ensuring the quality of the final product. The intermixing effect caused by agitators, which alters the powder's bulk density, flow rate, and flow patterns, plays a significant role in this process, yet it is often overlooked. This study combines discrete element method (DEM) modeling and experiments using a commercial-scale feeder to propose a Digital Twin (DT) framework. The DEM model accurately captures key flow features, such as bypass trajectories, stagnant zones, and preferential flow patterns, while providing quantitative predictions for the feed factor and zones prone to material accumulation. Scenario analysis is performed to identify the most favorable operating ranges of the screw-agitator ratio and screw speed, considering the cohesive properties of the powder. The study demonstrates that powders with poor flow characteristics require tighter operational constraints, as the screw-agitator ratio is susceptible to variations in mass feed rate. This contribution highlights the importance of selecting an appropriate screw-agitator ratio instead of maintaining a fixed value. Properly choosing this ratio helps determine an optimal operation window, which aims to achieve a minimum agitation level needed to induce unhindered flow and reduce variability in the mass flow rate. [ABSTRACT FROM AUTHOR]

While data-driven approaches demonstrate great potential in atmospheric modeling and weather forecasting, ocean modeling poses distinct challenges due to complex bathymetry, land, vertical structure, and flow non-linearity. This study introduces OceanNet, a principled neural operator-based digital twin for regional sea-suface height emulation. OceanNet uses a Fourier neural operator and predictor-evaluate-corrector integration scheme to mitigate autoregressive error growth and enhance stability over extended time scales. A spectral regularizer counteracts spectral bias at smaller scales. OceanNet is applied to the northwest Atlantic Ocean western boundary current (the Gulf Stream), focusing on the task of seasonal prediction for Loop Current eddies and the Gulf Stream meander. Trained using historical sea surface height (SSH) data, OceanNet demonstrates competitive forecast skill compared to a state-of-the-art dynamical ocean model forecast, reducing computation by 500,000 times. These accomplishments demonstrate initial steps for physics-inspired deep neural operators as cost-effective alternatives to high-resolution numerical ocean models. [ABSTRACT FROM AUTHOR]

One marker of expertise in sport is athletes' ability to anticipate future events. In the 4 × 100 m relay, these anticipation skills are an essential asset for initiating their run at the right time. However, no study has focused on describing the underlying perceptual‐motor processes involved. Virtual reality provides powerful tools to describe and understand these processes, overcoming the drastic constraints encountered in the real world. Nineteen athletes from the French national teams were immersed in a digital replica of the Stade de France and confronted with digital twins of potential partners based on motion capture. Their task was to initiate their run exactly when their virtual partner passed over a go‐mark placed on the ground. The timing of different body motor events and visual behavior were measured and analyzed. Results showed that the execution of this highly constrained task is the result of a significant reduction in the variability of motor events preceding the start. These findings reveal the implementation of a perceptual‐motor dialog until the initiation of the run. This study is a first step toward understanding the mechanisms underlying anticipation skills in the 4 × 100 m relay; it constitutes a preliminary step to the deployment of VR training protocols. [ABSTRACT FROM AUTHOR]

Engineering education at the Institute for Information Management in Engineering integrates product lifecycle management (PLM), computer‐aided design (CAD), eXtended reality (XR), and artificial intelligence (AI) to enhance learning and prepare students for modern challenges. Our interdisciplinary approach, emphasizing digital twins and virtual twins, fosters immersive, hands‐on experiences. This paper reviews our strategies, comparing them with global initiatives, highlighting the transformative impact of our curriculum on preparing future engineers for complex industrial environments. [ABSTRACT FROM AUTHOR]

Owing to the architected void-filled low-density configurations, metamaterials are prone to defects during the complex manufacturing process, or damages under operational conditions. Recently mechanical cloaking has been proposed to shield the effect of such disorders in terms of homogenized mechanical responses. The major drawback in these studies are that the damage location should be known a priori, and the cloak is designed around that damaged zone before manufacturing. Such postulation does not allow unsupervised damage resilience during the manufacturing and service life of metamaterials by active reconfiguration of the stress field depending on the random and unpredictable evolution of damage. Here, we propose a radically different approach by introducing piezoelectric lattices where the effect of random appearance of any single or multiple disorders and damages with complex shapes, sizes and distributions can be shielded through active multi-physically controlled cloaks by voltage-dependent modulation of the stress fields within the cloaking region. Notably, this can be achieved without breaking periodicity and any additional material in the cloaking region unlike earlier studies concerning mechanical cloaks. The proposed active class of elastic metamaterials will bring a step-change in the on-demand mechanical performance of critically important structural components and unsupervised damage resilience for enhanced durability and sustainability. This article is part of the theme issue 'Current developments in elastic and acoustic metamaterials science (Part 1)'. [ABSTRACT FROM AUTHOR]

Human digital twins are computational models of the human actions involved in interacting and operating technical artifacts. Such models provide a conceptual and practical tool for artificial intelligence designers when they seek to replace human work with intelligent machines. Indeed, digital twins have long served as models of technical and cyber-physical processes. Human digital twins have such models as their foundations but also include models of human actions. As a result, human digital twin models enable technology designers to model how people interact with intelligent technical artifacts. Yet, development of human digital twins is associated with certain conceptual problems. To clarify the basic idea, we constructed a human digital twin for Minsky's M-Machine. The abstract conceptual structure of this machine and its generality allowed us to analyze the general properties of human digital twins, their design, and their use as tools in designing intelligent technologies. [ABSTRACT FROM AUTHOR]

During service, civil turbofans experience environmentally induced deterioration. Predicting this in a digital service twin model is computationally challenging due to the need to model both deterioration mechanisms and environmental conditions. For compressor erosion, a key challenge is to model particle ingestion throughout a flight mission (FM). During ground operations, these particles may be airborne or deposited on runways and taxiways. This work assesses the impact of the latter on turbofan core compressor deterioration during a mission. The airflow field in front of the engine intake is approximated using potential flow theory. Comparisons with measurements show that the predicted air velocity near the engine is underestimated since the inlet ground vortices generated from viscous effects are neglected. The forces acting on the particles are derived from the flow field. It turns out that most particles are lifted from the ground during take-off (TO). Yet only smaller particles below ≈ 50 µm are ingested into the engine intake. A deterioration model based on flat plate erosion experiments is used to compute mission severity, assuming all particles are similar to medium Arizona Road Dust. The results indicate that the engine's distance from the ground, power setting, and the number of particles on the ground are key parameters influencing the impact of runway and taxiway particles. Considering the underestimation of the airflow field and thus the number of particles ingested, it is concluded that runway and taxiway particles play a major role in turbofan compressor deterioration. [ABSTRACT FROM AUTHOR]

To address the problems of low accuracy in fault diagnosis of oil-immersed transformers, poor state perception ability and real-time collaboration during diagnosis feedback, a fault diagnosis method for transformers based on the integration of digital twins is proposed. Firstly, fault sample balance is achieved through Iterative Nearest Neighbor Oversampling (INNOS), Secondly, nine-dimensional ratio features are extracted, and the correlation between dissolved gases in oil and fault types is established. Then, sparse principal component analysis (SPCA) is used for feature fusion and dimensionality reduction. Finally, the Aquila Optimizer (AO) is introduced to optimize the parameters of the Kernel Extreme Learning Machine (KELM), establishing the optimal AO-KELM diagnosis model. The final fault diagnosis accuracy reaches 98.1013%. Combining transformer digital twin models, real-time interaction mapping between physical entities and virtual space is achieved, enabling online diagnosis of transformer faults. Experimental results show that the method proposed in this paper has high diagnostic accuracy and strong stability, providing reference for the intelligent operation and maintenance of transformers. [ABSTRACT FROM AUTHOR]

Conventional patient monitoring methods require skin-to-skin contact, continuous observation, and long working shifts, causing physical and mental stress for medical professionals. Remote patient monitoring (RPM) assists healthcare workers in monitoring patients distantly using various wearable sensors, reducing stress and infection risk. RPM can be enabled by using the Digital Twins (DTs)-based Internet of Robotic Things (IoRT) that merges robotics with the Internet of Things (IoT) and creates a virtual twin (VT) that acquires sensor data from the physical twin (PT) during operation to reflect its behavior. However, manual navigation of PT causes cognitive fatigue for the operator, affecting trust dynamics, satisfaction, and task performance. Also, operating manual systems requires proper training and long-term experience. This research implements autonomous control in the DTs-based IoRT to remotely monitor patients with chronic or contagious diseases. This work extends our previous paper that required the user to manually operate the PT using its VT to collect patient data for medical inspection. The proposed decision-making algorithm enables the PT to autonomously navigate towards the patient's room, collect and transmit health data, and return to the base station while avoiding various obstacles. Rather than manually navigating, the medical personnel direct the PT to a specific target position using the Menu buttons. The medical staff can monitor the PT and the received sensor information in the pre-built virtual environment (VE). Based on the operator's preference, manual control of the PT is also achievable. The experimental outcomes and comparative analysis verify the efficiency of the proposed system. [ABSTRACT FROM AUTHOR]

The scientific field of precision agriculture employs increasingly innovative techniques to optimize inputs, maximize profitability, and reduce environmental impact. However, obtaining a high number of soil samples is challenging in order to make precision agriculture viable. There is a trade-off between the amount of data needed and the time and resources spent to obtain these data compared to the accuracy of the maps produced with more or fewer points. In the present study, the research was based on an exhaustive dataset of apparent electrical conductivity (aEC) containing 3906 points distributed along 26 transects with spacing between each of up to 40 m, measured by the proximal soil sensor EM38-MK2, for a grain-producing area of 72 ha in São Paulo, Brazil. A second sparse dataset was simulated, showing only four transects with a 400 m distance and, in the end, only 162 aEC points. The aEC map via ordinary kriging (OK) from the grid with 26 transects was considered the reference, and two other mapping approaches were used to map aEC via sparse grid: kriging with external drift (KED) and geographically weighted regression (GWR). These last two methods allow the increment of auxiliary variables, such as those obtained by remote sensors that present spatial resolution compatible with the pivot scale, such as data from the Landsat-8, Aster, and Sentinel-2 satellites, as well as ten terrain covariates derived from the Alos Palsar digital elevation model. The KED method, when used with the sparse dataset, showed a relatively good fit to the aEC data (R2 = 0.78), with moderate prediction accuracy (MAE = 1.26, RMSE = 1.62) and reasonable predictability (RPD = 1.76), outperforming the GWR method, which had the weakest performance (R2 = 0.57, MAE = 1.78, RMSE = 2.30, RPD = 0.81). The reference aEC map using the exhaustive dataset and OK showed the highest accuracy with an R2 of 0.97, no systematic bias (ME = 0), and excellent precision (RMSE = 0.56, RPD = 5.86). Management zones (MZs) derived from these maps were validated using soil texture data from clay samples measured at 0–10 cm depth in a grid of 72 points. The KED method demonstrated the highest potential for accurately defining MZs for irrigation, producing a map that closely resembled the reference MZ map, thereby providing reliable guidance for irrigation management. [ABSTRACT FROM AUTHOR]

A digital twin (DT) is a virtual/digital model of any physical object (physical twin), interconnected through data exchange. In the context of Industry 4.0, DTs are integral to intelligent automation driving innovation at scale by providing significant improvements in precision, flexibility, and real-time responsiveness. A critical challenge in developing DTs is achieving a model that reflects real-time conditions with precision and flexibility. This paper focuses on evaluating latency and accuracy, key metrics for assessing the efficacy of a DT, which often hinder scalability and adaptability in robotic applications. This article presents a comprehensive framework for developing DTs using Unity and Robot Operating System (ROS) as the main layers of digitalization and communication. The MoveIt package was used for motion planning and execution for the robotic arm, showcasing the framework's versatility independent of proprietary constraints. Leveraging the versatility and open-source nature of these tools, the framework ensures interoperability, adaptability, and scalability, crucial for modern smart manufacturing applications. Our approach was validated by conducting extensive accuracy and latency tests. We measured latency by timestamping messages exchanged between the physical and digital twin, achieving a latency of 77.67 ms. Accuracy was assessed by comparing the joint positions of the DT and the physical robotic arm over multiple cycles, resulting in an accuracy rate of 99.99%. The results highlight the potential of DTs in enhancing operational efficiency and decision-making in manufacturing environments. [ABSTRACT FROM AUTHOR]

In neurointensive care units (NICUs), particularly in cases involving traumatic brain injury (TBI), swift and accurate decision-making is critical because of rapidly changing patient conditions and the risk of secondary brain injury. The use of artificial intelligence (AI) in NICU can enhance clinical decision support and provide valuable assistance in these complex scenarios. This article aims to provide a comprehensive review of the current status and future prospects of AI utilization in the NICU, along with the challenges that must be overcome to realize this. Presently, the primary application of AI in NICU is outcome prediction through the analysis of preadmission and high-resolution data during admission. Recent applications include augmented neuromonitoring via signal quality control and real-time event prediction. In addition, AI can integrate data gathered from various measures and support minimally invasive neuromonitoring to increase patient safety. However, despite the recent surge in AI adoption within the NICU, the majority of AI applications have been limited to simple classification tasks, thus leaving the true potential of AI largely untapped. Emerging AI technologies, such as generalist medical AI and digital twins, harbor immense potential for enhancing advanced neurocritical care through broader AI applications. If challenges such as acquiring high-quality data and ethical issues are overcome, these new AI technologies can be clinically utilized in the actual NICU environment. Emphasizing the need for continuous research and development to maximize the potential of AI in the NICU, we anticipate that this will further enhance the efficiency and accuracy of TBI treatment within the NICU. [ABSTRACT FROM AUTHOR]

Early defect identification in laser-directed energy deposition (L-DED) additive manufacturing (AM) is pivotal for preventing build failures. Traditional single-modal monitoring approaches lack the capability to fully comprehend process dynamics, leading to a gap in multisensor monitoring strategies. This research proposes a novel in-situ monitoring method using a multi-sensor fusion-based digital twin (MFDT) for localized quality prediction, coupled with machine learning (ML) models for data fusion. It investigates acoustic signals from laser-material interactions as defect indicators, crafting a ML-based pipeline for rapid defect detection via feature extraction, fusion, and classification. This approach not only explores acoustic features across multiple domains, as well as coaxial melt pool images for ML model training, but it also introduces a novel MFDT framework that combines data from coaxial melt pool vision cameras and microphones, synchronized with robotic movements, to predict localized quality attributes. The key novelty in this research is the exploration of intra-modality and cross-modality multisensor feature correlations, revealing key vision and acoustic signatures associated with varying process dynamics. A comprehensive understanding of how multi-sensor signature varies with process dynamics improves the effectiveness of the proposed multi-sensor fusion model. The proposed model outperforms conventional methods with a 96.4 % accuracy, thereby setting a solid foundation for future self-adaptive quality improvement strategies in AM. [ABSTRACT FROM AUTHOR]

Human-robot collaboration (HRC) in assembly is becoming increasingly popular in the field of intelligent manufacturing. However, safety concerns remain the most critical issue to be addressed. The complex assembly environment and the individual differences of workers make it challenging to ensure safety effectively. Furthermore, the concept of human-centric manufacturing also places higher requirements on safety and efficiency of HRC assembly. The application of digital twin (DT) technology has bolstered the cognitive and decision-making capabilities in the context of HRC assembly. This technological advancement provides essential support for addressing safety concerns in HRC assembly processes guided by a human-centric approach. A personalised safety detection method for HRC assembly based on DT technology is proposed. This approach involves personalised modelling and simulation of real objects within the HRC process, establishing a collision detection model based on skeleton points. Subsequently, human motion prediction methods drive safety monitoring between humans and robots. Ultimately, personalised safety warning strategies are applied to ensure the safety of the assembly process. [ABSTRACT FROM AUTHOR]

Traditional vehicular edge computing research usually ignores the mobility of vehicles, the dynamic variability of the vehicular edge environment, the large amount of real‐time data required for vehicular edge computing, the limited resources of edge servers, and collaboration issues. In response to these challenges, this article proposes a vehicular edge computing optimization scheme based on the Lyapunov function and Deep Reinforcement Learning. In this solution, this article uses Digital Twin technology (DT) to simulate the vehicular edge environment. The edge server DT is used to simulate the vehicular edge environment under the edge server, and the base station DT is used to simulate the entire vehicular edge system environment. Based on the real‐time data obtained from DT simulation, this paper defines the Lyapunov function to simplify the migration cost of vehicle tasks between servers into a multi‐objective dynamic optimization problem. It solves the problem by applying the Twin Delayed Deep Deterministic Policy Gradient (TD3) algorithm. Experimental results show that compared with other algorithms, this scheme can effectively optimize the allocation and collaboration of vehicular edge computing resources and reduce the delay and energy consumption caused by vehicle task processing. [ABSTRACT FROM AUTHOR]

While large enterprises are actively preparing for digital transformation by leveraging technologies such as digital twins, smaller companies face challenges due to economic constraints and market uncertainties, leading to a relative lack of awareness and readiness. To address this situation, this study proposes a digital twin development framework tailored for small and medium-sized enterprises (SMEs). This framework utilizes attachable IoT devices for real-time collection of manufacturing data and leverages public server systems for data management. Moreover, it enables the refinement and optimization of digital twins by training machine learning models on collected data. Additionally, the framework includes the integration of simulation models and machine learning models for comprehensive digital twin modelling. Finally, the paper suggests a process for applying and validating this framework in real manufacturing companies, demonstrating the effects of digital twin implementation on productivity enhancement in the production lines of two SMEs. [ABSTRACT FROM AUTHOR]

Digital Twin (DT) is considered the most modern simulation method when it comes to tightly connect the real and virtual worlds to produce accurate simulation models of constant use to aid stakeholders in decision making. This method has been used more intensively in the manufacturing sector, but its use has spread to other sectors of great relevance in the economy, such as the retail industry. The contribution of this article to existing research is to present a Systematic Literature Review (SLR) addressing the state-of-the-art of the potential use of Digital Twins (DTs) to support decision making in the retail field. The main findings illustrate a considerable appearance of case studies applied directly in the sector, a strong investment in research focused on supply chains, an extensive use of simulation models and sensors, however, that mostly make use of secondary data and are not completely autonomous. Summary tables of the main benefits, opportunities and challenges in applying DTs in the retail sector are also presented. [ABSTRACT FROM AUTHOR]

Automation is the guiding principle of this new era, and despite the problems that humanity faces as a result of automation, technology has greatly benefitted people by streamlining challenging jobs across many industries. The mining business, where there are frequently unforeseen mishaps, is one such industry that requires complete automation. In this work, a new simulative processing environment termed DTFL‐DF—Digital twin federated learning decision forest a digital twin environment that is tailored to handle unforeseen fire incidents—is offered as a means of avoiding these unplanned catastrophes in the mining industry. Although the design presented here is intended for usage in the mining sector, it can also be applied to other sectors. The overall technological contribution of this study is to guarantee the processing of real‐time data in order to successfully handle mission‐critical operations without relying on past data. This is accomplished by adapting the digital twin's original design and distributing the processing environment within the edge‐fog layer. Results analysis in the form of robustness analysis, performance evaluation of the classification model, etc. provides strong support for the suggested methodology. For handling the decentralized training procedure, a brand‐new algorithm termed FL‐DF is put forth in order to speed up classification and prevent any sort of catastrophe. [ABSTRACT FROM AUTHOR]

The purpose of the PRODEC scenario‐based design method is the incremental cross‐fertilization and refinement of procedural scenarios and declarative configurations. It uses virtual prototypes of the developed systems (mainly life‐critical systems) to conduct human‐in‐the‐loop simulations (HITLSs). Based on human systems integration (HSI) principles and criteria, as well as expertise and experience in the domain at stake, this HSI approach grounded in virtual environments requires a clear definition of physical and cognitive tangibility metrics to assess the distance between virtual and tangible (grasp) dimensions of the system being developed when it is put to work. PRODEC considers human and machine systems described in terms of structures and functions incrementally designed using procedural scenarios (i.e., stories) in task and activity networks, which provide life to declarative configurations (i.e., system's functions and structures). This active modeling and simulation process enables the discovery of emergent structures and functions of the system being developed when it is virtually operated. PRODEC's use is illustrated in an example. We discuss the use of PRODEC and its results as to how they can be used with digital twins. [ABSTRACT FROM AUTHOR]

The rise of digital twin-based operational improvements poses a challenge to protecting industrial cyber-physical systems. It is crucial to safeguard digital twins while disclosing internals, which can create an increased attack surface. However, leveraging digital twins to simulate attacks on physical infrastructure becomes essential for enhancing ICPS cybersecurity resilience. This paper introduces an integrated intelligent defense framework called CyberDefender to study various attacks on digital twin-based ICPS from a four-layer perspective (i.e., digital twin-based industrial cyber-physical systems infrastructure layer, honeynet and software-defined industrial network layer, intelligent security platform layer, and smart industrial application layer). To demonstrate its feasibility, we implemented a proof-of-concept (PoC) solution using open-source tools, including AWS for cloud infrastructure, T-Pot for Honeynet, Mininet for SDN support, ELK tools for data management, and Docker for containerization. This framework utilizes an integrated intelligent approach to enhance intrusion detection and classification capabilities for digital twin-based industrial cyber-physical systems (DT-ICPS). The proposed intrusion detection system (IDS) combines two strategies to improve security. First, we present an innovative approach to identifying essential features using explainable AI and ensemble-based filter feature selection (XAI-EFFS). By using Shapley Additive Explanations (SHAP), we analyze the impact of different variables on predictive outcomes. Secondly, we propose a hybrid GRU-LSTM deep-learning model for detecting and classifying intrusions. We optimize the hyperparameters of the GRU-LSTM model by using a Bayesian optimization algorithm. The proposed method demonstrates excellent performance, outperforming conventional state-of-the-art techniques with an accuracy rate of 98.96%, which is a remarkable improvement. Additionally, it effectively detects zero-day attacks, contributing to digital twin-based ICPS cybersecurity resilience. [ABSTRACT FROM AUTHOR]

The reliability and methodology of genome-scale metabolic models (GEMs) of Chinese hamster ovary (CHO) cells have advanced. CHO-GEMs have aided in cell line and process development, thus impacting on biomanufacturing efficiency. An integrative model structure can incorporate multiple layers and capture condition-specific cell regulation. Integration of CHO-GEMs with artificial intelligence (AI) and advanced algorithms will enable autonomous bioreactor management for digital biomanufacturing. Genome-scale metabolic models (GEMs) of Chinese hamster ovary (CHO) cells are valuable for gaining mechanistic understanding of mammalian cell metabolism and cultures. We provide a comprehensive overview of past and present developments of CHO-GEMs and in silico methods within the flux balance analysis (FBA) framework, focusing on their practical utility in rational cell line development and bioprocess improvements. There are many opportunities for further augmenting the model coverage and establishing integrative models that account for different cellular processes and data for future applications. With supportive collaborative efforts by the research community, we envisage that CHO-GEMs will be crucial for the increasingly digitized and dynamically controlled bioprocessing pipelines, especially because they can be successfully deployed in conjunction with artificial intelligence (AI) and systems engineering algorithms. [ABSTRACT FROM AUTHOR]

Digital twins for buildings can significantly reduce building operation costs. However, existing methods for constructing geometric digital twins fail to model the complex geometry of indoor environments. To address this problem, this paper proposes a novel method for digitizing building geometry with arbitrary shapes of spaces by detecting empty regions in point clouds and then expanding them to occupy the entire indoor space. The detected spaces are then used to detect structural objects and transition between spaces, such as doors, without assuming their geometric properties. The method reconstructs the volumetric representation of individual spaces, detects walls, windows and doors between them and splits the point cloud data (PCD) into point clusters of individual spaces from large-scale cluttered PCDs of complex environments. We conduct extensive experiments on Stanford 3D Indoor Spaces data set (S3DIS) and TUMCMS data sets and show that the proposed method outperforms existing methods for digitizing Manhattan-world buildings. In contrast to existing approaches, the method allows digitizing buildings with arbitrarily shaped spaces, including complex layouts, nonflat, nonvertical walls, and nonflat, nonhorizontal floors and ceilings. [ABSTRACT FROM AUTHOR]

Metal additive manufacturing (MAM) technology provides a direct and efficient way for large-scale, integrated, and sophisticated engineering components in the aerospace field. Non-destructive testing (NDT) technique has been proven to be a significant method for quality evaluation of MAM components without destructing the integrity and performance of the components. However, it is still a challenging task that how to accurately and efficiently achieve the quality evaluation of large-scale and complex MAM engineering components using NDT technique. Nowadays, most studies mainly focus on the quality evaluation of small specimens or simple structure components, with comparatively less on the assessment of large-scale or complex engineering components. Thus, this review briefly introduced three urgent demands for quality evaluation of as-fabricated large or complex structure components and eight conventional NDT techniques possibly used for the quality detection of MAM. Four main challenges and future development trends in NDT technique are discussed in detail according to testing ability, data processing ability, and test standards. Among the future development trends, the application of machine learning and digital twins in NDT technique are the most promising method for intelligent detection and quality prediction of components. This work aims to provide a insight to enlarge the application of engineering components fabricated by MAM. [ABSTRACT FROM AUTHOR]

The advent of Internet of Things and artificial intelligence in the era of Industry 4.0 has transformed decision-making within production systems. In particular, many decisions that previously required significant human activity are now made automatically with minimal human intervention via so-called digital twins (DTs). In the context of maintenance and reliability modeling, this naturally calls for new paradigms that can be seamlessly integrated within DTs for decision-making. The input data for time to failure needed in reliability computations are directly collected from the work center in a digital setting and often do not satisfy a known distribution. A neural network (NN) is proposed here to bypass this difficulty within the DT. Further, an algorithm inspired from machine learning is employed to solve the underlying semi-Markov decision process, whose transition model is captured via the NN. Numerical studies are carried out to demonstrate the usefulness of the approach. Finally, convergence properties of the algorithm are analyzed mathematically. [ABSTRACT FROM AUTHOR]

Building information modeling (BIM) enables substantial improvement in the architecture, engineering, and construction (AEC) industry. As a leading actor in the AEC industry, policymakers have the means to develop appropriate strategies for addressing the factor affecting BIM implementation. However, the lack of empirical investigation on the relationships between factors to implementing BIM and government strategies prevents the strategies from being effective. This study aimed to establish relationships between critical factors and government strategies for implementing BIM using Syria as a case study. A systematic literature review and semistructured interviews with AEC professionals yielded 27 factors and 12 government strategies for implementing BIM. The collected data were analyzed using descriptive statistics, a chi-squared test, exploratory factor analysis (EFA), and partial least-squares structural equation modeling (PLS-SEM). The EFA classified the factors into four underlying constructs (technology, project environment, governmental and organizational, and people) and government strategies into two underlying constructs (soft and hard strategies). The structural equation model revealed that soft strategies positively affect technology, project environment, and people. Moreover, hard strategies positively affect technology. These findings provide new insights into the body of knowledge on optimal government strategies for implementing BIM in low-income economies. Policymakers can use the findings of this study to prioritize efforts and resources when promoting BIM implementation in the local AEC industry. Practical Applications: This study aimed to establish relationships between critical factors and government strategies for implementing building information modeling (BIM). The findings illustrate that soft strategies positively and substantially affect technology, project environment, and people. Furthermore, hard strategies positively and substantially affect technology. With these findings, policymakers and project stakeholders can make informed decisions on government strategy selection to address the critical factors. At the early stage, executing appropriate strategies saves resources and contributes to implementing BIM successfully. This study provides empirical evidence of the relationships between the critical factors and government strategies for implementing BIM. It provides major areas policymakers can commit resources to enhance and eventually help diffuse BIM across the architecture, engineering, and construction (AEC) industry. It also helps embrace advances in BIM, including digital twins, and improve industry efficiency. [ABSTRACT FROM AUTHOR]