Search

To design more environmentally friendly, economical, and efficient demulsifiers for oily wastewater treatment, hydrophobic octadecylphosphonic acid (ODPA)-modified Fe3O4 nanoparticles (referred to as Fe3O4@ODPA) were prepared by condensation of hydroxyl groups between ODPA and Fe3O4 nanoparticles using the co-precipitation method. The prepared magnetite nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscope (SEM), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric/differential thermogravimetric (TG/DTG) analysis. The water contact angles (θW) of Fe3O4@ODPA nanoparticles were more than 120°, indicating hydrophobic nature, and the diameter of the obtained spherical-shaped magnetite nanoparticles was 12–15 nm. The ODPA coating amount (AO) (coating weight per gram Fe3O4) and specific surface area (SO) of Fe3O4@ODPA were 0.124–0.144 g·g−1 and 78.65–91.01 m2·g−1, respectively. To evaluate the demulsification ability, stability, and reusability, the magnetite nanoparticles were used to demulsify an n-hexane-in-water nanoemulsion. The effects of the magnetite nanoparticle dosage (CS), pH value of nanoemulsion, and NaCl or CaCl2 electrolytes on the demulsification efficiency (RO) were investigated. The RO of Fe3O4@ODPA samples was found to be higher than that of bare Fe3O4 samples (S0, ST, and SN) under all CS values. With the increase in CS, the RO of Fe3O4@ODPA samples initially increased and then approached equilibrium value at Cs = 80.0 g·L−1. A maximum RO of ~93% was achieved at CS = 100.0 g·L−1 for the Fe3O4@ODPA sample S2. The pH and two electrolytes had a minor effect on RO. The Fe3O4@ODPA nanoparticles maintained high RO even after being reused for demulsification 11 times. This indicates that the hydrophobic Fe3O4@ODPA samples can be used as an effective magnetite demulsifer for oil-in-water nanoemulsions. [ABSTRACT FROM AUTHOR]

In the present study, biocompatible manganese nanoparticles have been linked with zinc and iron molecules to prepare different derivatives of Mn0.5Zn0.5ErxYxFe2−2xO4 NPs (x = 0.02, 0.04, 0.06, 0.08, 0.10), using an ultrasonication approach. The structure, surface morphology, and chemical compositions of Mn0.5Zn0.5ErxYxFe2−2xO4 NPs were elucidated by X-ray diffractometer (XRD), High-resolution transmission electron microscopy (HR-TEM), scanning electron microscope (SEM), and Energy Dispersive X-Ray Analysis (EDX) techniques. The bioactivity of Mn0.5Zn0.5ErxYxFe2−2xO4 NPs on normal (HEK-293) and (HCT-116) colon cancer cell line was evaluated. The Mn0.5Zn0.5ErxYxFe2−2xO4 NPs treatment post 48 h resulted in a significant reduction in cells (via MTT assay, having an IC50 value between 0.88 µg/mL and 2.40 µg/mL). The specificity of Mn0.5Zn0.5ErxYxFe2−2xO4 NPs were studied by treating them on normal cells line (HEK-293). The results showed that Mn0.5Zn0.5ErxYxFe2−2xO4 NPs did not incur any effect on HEK-293, which suggests that Mn0.5Zn0.5ErxYxFe2−2xO4 NPs selectively targeted the colon cancerous cells. Using Candida albicans, antifungal activity was also studied by evaluating minimum inhibitory/fungicidal concentration (MIC/MFC) and the effect of nanomaterial on the germ tube formation, which exhibited that NPs significantly inhibited the growth and germ tube formation. The obtained results hold the potential to design nanoparticles that lead to efficient bioactivity. [ABSTRACT FROM AUTHOR]

In the present work, we have reported a facile and large-scale synthesis of TiO2 nanoparticles (NPs) through urea-assisted thermal decomposition of titanium oxysulphate. We have successfully synthesized TiO2 NPs by using this effective route with different weight ratios of titanium oxysulphate: urea. The structures and properties of TiO2 NPs were confirmed by scanning electron microscope) (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FT-IR), ultra violet–visible spectroscopy (UV-vis), and photoluminescence (Pl) techniques. XRD demonstrated that TiO2 NPs holds of anatase crystal phase with crystallizing size 14–19 nm even after heating at 600 °C. TGA, SEM, and TEM images reveal urea's role, which controls the size, morphology, and aggregation of TiO2 NPs during the thermal decomposition. These TiO2 NPs were employed for photodegradation of Methyl Orange (MO) in the presence of ultraviolet (UV) radiation. An interesting find was that the TiO2 NPs exhibited better photocatalytic activity and excellent recycling stability over several photodegradation cycles. Furthermore, the present method has a great perspective to be used as an efficient method for large-scale synthesis of TiO2 NPs. [ABSTRACT FROM AUTHOR]