Search

The integrated process of ozonation coupled with ceramic membrane filtration has been actively utilized to alleviate membrane fouling in water/wastewater treatment, however, the effect of ozonation on protein-based ceramic membrane fouling is still contradictory. Herein, for the first time, we reported the severe protein-based ceramic membrane fouling at high ozone dosage in the integrated process of ozonation coupled with ceramic membrane filtration and the related fouling mechanism was systematically explored. Ozonation at low dosage slightly mitigated membrane fouling, whereas severe membrane fouling occurred at high ozone dosage (10 mg/L for pre-ozonation; 4 and 10 mg/L for in-situ ozonation). At high ozone dosage, the trans-membrane pressure (TMP) remarkably increased (> 40 kPa) within 90 min and both hydraulically reversible and irreversible fouling contributed to the total membrane fouling resistance. Electro kinetic potential and particle size of the bovine serum albumin (BSA) solution were not the key factors affecting the aggravated membrane fouling at high ozone dosage. The remarkably deteriorated membrane fouling at high ozone dosage can be accounted for the formation of BSA crosslinks ascribed to the oligomerization and agglomeration of BSA and the intermolecular disulfide bridge formation with the crosslinks progressively accumulating on the membrane surface and in the membrane pores during filtration. The modeling results confirmed that the BSA-based membrane fouling mechanism was changed from cake-intermediate to cake-standard with ozonation at high ozone dosage. Meanwhile, the cake layer and/or gel layer played a more important role for the aggravated membrane fouling at high ozone dosage even though the contribution of pore blocking was also significant. [ABSTRACT FROM AUTHOR]

The combined pretreatment of coagulation and ozonation is extensively adopted for water quality enhancement and membrane fouling reduction in wastewater reclamation. Herein, the integrated treatment of ferrate pretreatment and in-situ ozonation/ceramic membrane filtration on water quality improvement and fouling reduction of ceramic membrane in secondary wastewater effluent treatment was reported for the first time. The results showed that the hybrid treatment of ferrate pretreatment and in-situ ozonation greatly inhibited the generation of N-dimethyl nitrosamine (NDMA) and did not generate bromate. Meanwhile, the best removal efficiencies of low molecular weight (MW) organics (32.3%), humic-like substances (17.8%) and biopolymers (87.5%) in effluent were achieved by the combination of ferrate (0.15 mM) pretreatment and in-situ ozonation (10 mg/L). Moreover, the control sample (without any treatment) had a fouling transmembrane pressure (TMP) of 30.5 kPa after 7.0 h filtration under a constant flux of 90 L/(m2·h) while that was only 1.0 kPa by the hybrid treatment of ferrate (0.15 mM) pretreatment and in-situ ozonation (10 mg/L). Soluble microbial products (SMP)-like substances with high molecular weight (MW) of 20–2000 kDa were the main foulants and intermediate-standard fouling mechanism played a principal role during the membrane filtration process. Statistical analysis showed that dissolved organic carbon (DOC), UV 254 and protein had the greatest positive correlation (above 0.92) to the total fouling resistance, whilst turbidity displayed the greatest negative correlation (around −0.61) to the total fouling resistance. The remarkable fouling alleviation was due to the improved water quality and in-situ cleaning, which were contributed to the coagulation and oxidation by ferrate and in-situ ozonation. Image 1 • Ferrate pretreatment- in-situ ozonation greatly reduces ceramic membrane fouling. • NDMA and bromate are remarkably reduced by ferrate pretreatment- in-situ ozonation. • Intermediate-standard fouling is the main fouling mechanism. • DOC, UV 254 and protein are the most important positive factors to R t. • Fouling alleviation is due to the improved water quality and in-situ cleaning. [ABSTRACT FROM AUTHOR]