Search

• Novel biphasic solvent based on polyamine was developed for CO 2 capture. • Microcalorimetry strategy was used to directly measure the CO 2 absorption heat. • The energy consumption of this absorbent was 32.6 % lower than that of 5 M MEA. • This biphasic solvent has superior phase-splitting behavior. • The salting-out effect was the main reason for the phase-splitting behavior. The CO 2 phase change absorbents(CPCAs) formed by introducing phase-splitting agents have attracted increasing attention because of their great energy-saving potential. However, the volatilization problem of the phase-splitting agents and the high viscosity of the solution affect the application of CPCAs. In this work, a novel CPCAs based on 2-Methylpiperazine (2MPRZ)/H 2 O was established by introducing triethylene glycol monobutyl ether (TGBE) with a high boiling point as a phase-splitting agent, and the 2MPRZ/H 2 O/TGBE system exhibited low volatility and low viscosity. The CO 2 capture performance of the novel CPCAs with different ratios was investigated in this work. The best CO 2 absorption rate was achieved by 2.5 M 2MPRZ/H 2 O/TGBE. The viscosity of this system before and after the CO 2 absorption process was merely 7.68 mPa·s and 11.64 mPa·s, respectively, and no volatilization of the phase-splitting agent was observed simultaneously. A convenient and rapid titration method was employed to determine the distribution of the 2MPRZ products in the two phases, which showed that 98 % of the 2MPRZ products were located in the CO 2 -rich phase. In addition, the CO 2 -rich phase captured 99 % of the total CO 2 , indicating that this system has superior phase-splitting behaviors. The regeneration energy consumption of this biphasic absorbent was 2.59 GJ/t CO 2 , which was 32.6 % lower than that of traditional MEA. Furthermore, the salting-out effect was proved to be the cause of the phase-splitting behavior by 13C NMR analysis. [ABSTRACT FROM AUTHOR]

• Three possible pathways for bicarbonate generation were investigated based on DFT. • Base-catalyzed CO 2 hydration is dominant in [N 1111 ][Gly]/EtOH aqueous system. • Water effect on phase change behavior is analyzed from hydrogen bonding view. • Water content of 5 wt% promotes products aggregation in favor of phase change. Ionic liquids-based anhydrous biphasic absorbents have the potential to lower the energy consumption for CO 2 capture. Recent experimental studies have revealed that the presence of water in [N 1111 ][Gly]/EtOH system leads to generation of a new CO 2 -product – bicarbonate and affects the phase change behavior. However, the reaction pathway for bicarbonate formation remains unclear. In this work, the reaction pathways were investigated in depth through quantum chemical calculations employing density functional theory, with reaction rate constants determined via transition state theory. Among the three possible reaction pathways, the base-catalyzed CO 2 hydration reaction prevailed, i.e. a one-step reaction involving [Gly]-, H 2 O, and CO 2. An H atom in H 2 O was transferred to [Gly]-'s amino group, forming protonated [Gly]-, and hydroxide combined with CO 2 to generate bicarbonate. Additionally, molecular dynamics simulations were conducted to understand the phase change behaviors with varying water content. When water content exceeded 5 wt%, an increased water content led to reduced hydrogen bonding among products and enhanced hydrogen bonding of products-solvent with the solvent, diminishing product self-aggregation. No phase change behavior were observed at water contents up to 80 wt%. This study could well explain the experimental phenomena of water effect on CO 2 absorption in [N 1111 ][Gly]/EtOH, providing theoretical references for application of ILs-based anhydrous biphasic absorbent. [ABSTRACT FROM AUTHOR]

[Display omitted] • Mo-based MXene is first applied as a cathode catalyst for Li-CO 2 batteries. • An innovative surface modification strategy, mild oxidation by CO 2 , is employed. • The catalyst optimizes the growth and decomposition of discharge products. • This MoO 2 @Mo 2 C-based Li-CO 2 battery outperforms most other MXene-based catalysts. The lithium-carbon dioxide (Li-CO 2) batteries hold promise for energy storage, given their capacity to capture and convert carbon dioxide (CO 2). However, the practical application of Li-CO 2 batteries continues to face substantial obstacles caused by sluggish CO 2 reduction/evolution kinetics, resulting in high overpotential and short lifespan. This work presents the fabrication of a highly effective MoO 2 @Mo 2 C heterostructure hybrid catalyst using a CO 2 oxidation strategy. This strategy integrated (in-situ) MoO 2 onto the surface of two-dimensional (2D) Mo 2 C MXene, enhancing catalytic activity while preserving 2D electron/ion pathways. As a result, the MoO 2 @Mo 2 C, when used as a catalyst in Li-CO 2 battery showcased a discharge capacity of 20790.8 mAh g−1 at a current density of 200 mA g−1. Notably, it achieved a long cycling life of 230 cycles at a cutoff capacity of 1000 mAh g−1 with a voltage gap as low as 1.85 V, which was significantly superior to that of a pristine Mo 2 CT x catalyst (3.61 V after twenty cycles). This work provides critical insights into the design of MXenes-based high-performance catalysts for advanced Li-CO 2 batteries. [ABSTRACT FROM AUTHOR]