Search

This report presents an investigation into the use of carbon paper electrodes prepared from chitosan-adhered graphene magnetite nanoparticles for the analysis of Cr(VI). The preparation and storage of carbon paper electrodes is a simple process, and these electrodes are easier to replace than electrodes modified by more conventional methods. The electrochemical detection of Cr(VI) using square wave adsorption cathodic dissolution voltammetry (SWAdCSV) with high selectivity and sensitivity, as well as the optimum conditions for the preparation of the electrodes and the electrode parameters affecting the SWAdCSV signal, were the main points of focus of the investigation. Cr(VI) was detected linearly in the range of 4-40 μg L-1 with a detection limit of 2.84 μg L-1. The electrode output precision, calculated as %RSD, was 7.16% (n = 6), and this was the measurement used for the detection of Cr(VI) in standard and test samples with recoveries between 89% and 114%. The results were consistent with those obtained using the standard UV-Vis spectrophotometric method with a paired t-test at 95% confidence level. [ABSTRACT FROM AUTHOR]

Non-enzymatic electrochemical blood glucose sensors often suffer from issues such as requiring an alkaline environment, limited monitoring range, and poor anti-interference properties. Carbon substrates have been demonstrated to improve the performance of non-enzymatic sensors, but complex and energy-consuming manufacturing processes restrict their use. Herein, a simple and green approach for the preparation of 3D porous Au/Au-Pt networks (PAAPNs) is proposed using tissue paper for recycling as the nanomaterial substrate to deposit Au-Pt bimetallic nanoparticles. The unique structure of the PAAPNs sensor allows for low-potential operation (-1.0 V) with a wide monitoring range (-0.25 to 36 mM) in a neutral environment. Moreover, the sensor exhibited excellent selectivity (<10% response of interference) even without the use of an anti-interference outer membrane. Further investigation using density functional theory (DFT) simulation revealed the synergistic effect between Au and Pt in promoting glucose oxidation. Overall, this work provides a simple and low-carbon footprint method for creating carbon substrates from tissue paper for recycling, offering new opportunities for fabricating novel value-added nanomaterials for medical sensing applications. [ABSTRACT FROM AUTHOR]

Safe, accurate, and reliable analysis of urinary biomarkers is clinically important for early detection and monitoring of the progression of chronic kidney disease (CKD), as it has become one of the world's most prevalent non-communicable diseases. However, current technologies for measuring urinary biomarkers are either time-consuming and limited to well-equipped hospitals or lack the necessary sensitivity for quantitative analysis and post a health risk to frontline practitioners. Here we report a robust paper-based dual functional biosensor, which is integrated with the clinical urine sampling vial, for the simultaneous and quantitative analysis of pH and glucose in urine. The pH sensor was fabricated by electrochemically depositing IrOx onto a paper substrate using optimised parameters, which enabled an ultrahigh sensitivity of 71.58 mV pH-1. Glucose oxidase (GOx) was used in combination with an electrochemically deposited Prussian blue layer for the detection of glucose, and its performance was enhanced by gold nanoparticles (AuNPs), chitosan, and graphite composites, achieving a sensitivity of 1.5 μA mM-1. This dual function biosensor was validated using clinical urine samples, where a correlation coefficient of 0.96 for pH and 0.98 for glucose detection was achieved with commercial methods as references. More importantly, the urine sampling vial was kept sealed throughout the sample-to-result process, which minimised the health risk to frontline practitioners and simplified the diagnostic procedures. This diagnostic platform, therefore, holds high promise as a rapid, accurate, safe, and user-friendly point-of-care (POC) technology for the analysis of urinary biomarkers in frontline clinical settings. [ABSTRACT FROM AUTHOR]

This article introduces distance-based paper analytical devices (dPADs) integrated with molecularly imprinted polymers (MIPs) and carbon dots (CDs) for simultaneous quantification of cytokine biomarkers, namely C-reactive protein (CRP), tumor necrosis factor-alpha (TNF-a), and interleukin-6 (IL-6) in human biological samples for diagnosis of cytokine syndrome. Using fluorescent CDs and MIP technology, the dPAD exhibits high selectivity and sensitivity. Detection is based on fluorescence quenching of CDs achieved through the interaction of the target analytes with the MIP layer on the paper substrate. Quantitative analysis is easily accomplished by measuring the distance length of quenched fluorescence with a traditional ruler and naked eye readout enabling rapid diagnosis of cytokine syndrome and the underlying infection. Our sensor demonstrated linear ranges of 2.50-24.0 pg mL-1 (R2 = 0.9974), 0.25-3.20 pg mL-1 (R2 = 0.9985), and 1.50-16.0 pg mL-1 (R2 = 0.9966) with detection limits (LODs) of 2.50, 0.25, and 1.50 pg mL-1 for CRP, TNF-a, and IL-6, respectively. This sensor also demonstrated remarkable selectivity compared to a sensor employing a non-imprinted polymer (NIP), and precision with the highest relative standard deviation (RSD) of 5.14%. The sensor is more accessible compared to prior methods relying on expensive reagents and instruments and complex fabrication methods. Furthermore, the assay provided notable accuracy for monitoring these biomarkers in various human samples with recovery percentages ranging between 99.22% and 103.58%. By integrating microfluidic systems, nanosensing, and MIPs technology, our developed dPADs hold significant potential as a cost-effective and user-friendly analytical method for point-of-care diagnostics (POC) of cytokine-related disorders. This concept can be further extended to developing diagnostic devices for other biomarkers. [ABSTRACT FROM AUTHOR]

Paper-based electrochemical sensors have the characteristics of flexibility, biocompatibility, environmental protection, low cost, wide availability, and hydropathy, which make them very suitable for the development and application of biological detection. This work proposes electrospun cellulose acetate nanofiber (CA NF)-decorated paper-based screen-printed (PBSP) electrode electrochemical sensors. The CA NFs were directly collected on the PBSP electrode through an electrospinning technique at an optimized voltage of 16 kV for 10 min. The sensor was functionalized with different bio-sensitive materials for detecting different targets, and its sensing capability was evaluated by CV, DPV, and chronoamperometry methods. The test results demonstrated that the CA NFs enhanced the detection sensitivity of the PBSP electrode, and the sensor showed good stability, repeatability, and specificity (p < 0.01, N = 3). The electrochemical sensing of the CA NF-decorated PBSP electrode exhibited a short detection duration of ∼5–7 min and detection ranges of 1 nmol mL−1–100 μmol mL−1, 100 fg mL−1–10 μg mL−1, and 1.5 × 102–106 CFU mL−1 and limits of detection of 0.71 nmol mL−1, 89.1 fg mL−1, and 30 CFU mL−1 for glucose, Ag85B protein, and E. coli O157:H7, respectively. These CA NF-decorated PBSP sensors can be used as a general electrochemical tool to detect, for example, organic substances, proteins, and bacteria, which are expected to achieve point-of-care testing of pathogenic microorganisms and have wide application prospects in biomedicine, clinical diagnosis, environmental monitoring, and food safety. [ABSTRACT FROM AUTHOR]

Selective enrichment of La(III) by green material as an industrial raw material is of great research interest. In this study, the selective interaction between P and La(III) was utilized, and waste paper (WP) modified with phytic acid (PA) was used to adsorb La(III) from water using a simple one-pot method. The adsorption capacity was 237.23 mg g−1 (30 °C, pH = 5, initial concentration of 200 mg L−1). The equilibrium isotherm fitted the Langmuir isotherm model well. The adsorption equilibrium was reached after 15 min. The adsorption kinetics followed the pseudo-second-order kinetic model, indicating that the adsorption mechanism of the material towards La(III) is single-layer chemisorption. It selectively adsorbed La(III) from four coexisting substances (Pb, Ni, Cu, and Co). After six cycles, the adsorption efficiency of the adsorbent material remained at 60%. [ABSTRACT FROM AUTHOR]

Employing a one-pot Schiff-base condensation approach, the derivative "cholyl hydrazide Schiff base of phenothiazine" (ChHSB-PTZ) based on cholic acid has been synthesized and characterized via standard procedures. ChHSB-PTZ demonstrates exceptional sensitivity towards Sn(II) metal ion detection through fluorescence "turn-off" behavior based on chelation-enhanced fluorescence quenching (CHEQ) even in the presence of various cations and anions. Through modified Stern–Volmer and Stern–Volmer graph analyses, the binding constant (Ka) and limit of detection (LOD) were found to be 2.8 × 1010 M−1 and 2.2 nM, respectively. A 1 : 1 stoichiometry between ChHSB-PTZ and the Sn(II) metal ion was found via Job's plot. Moreover, the distribution of electronic states in the ChHSB-PTZ Schiff base and the sensing mechanism (CHEQ) were clarified through the use of 1H NMR titration spectroscopy and density functional theory (DFT) calculations. ChHSB-PTZ test paper strips are developed as an essential tool to improve the analytical applicability of the device and enable the rapid, accurate, and affordable detection of Sn(II) metal ions in environmental analysis. [ABSTRACT FROM AUTHOR]

A new analytical method for chronic kidney disease (CKD) detection utilizing paper spray mass spectrometry (PS-MS) combined with machine learning is presented. The analytical protocol is rapid and simple, based on metabolic profile alterations in urine. Anonymized raw urine samples were deposited (10 μL each) onto pointed PS-MS sample strips. Without waiting for the sample to dry, 75 μL of acetonitrile and high voltage were applied to the strips, using high resolution mass spectrometry measurement (15 s per sample) with polarity switching to detect a wide range of metabolites. Random forest machine learning was used to classify the resulting data. The diagnostic performance for the potential diagnosis of CKD was evaluated for accuracy, sensitivity, and specificity, achieving results >96% for the training data and >91% for validation and test data sets. Metabolites selected by the classification model as up- or down-regulated in healthy or CKD samples were tentatively identified and in agreement with previously reported literature. The potential utilization of this approach to discriminate albuminuria categories (normo, micro, and macroalbuminuria) was also demonstrated. This study indicates that PS-MS combined with machine learning has the potential to be used as a rapid and simple diagnostic tool for CKD. [ABSTRACT FROM AUTHOR]

A new method utilizing fluorescent ratiometry is proposed for detecting putrescine and spermidine. The method involves the use of a fluorescent probe comprising a 2D halide perovskite synthesized from octadecylamine-iodine and PbI2via a grinding-sonicating technique, along with a Eu3+-complex. Upon excitation at 290 nm, the probe fluoresces at two distinguishable wavelengths. The addition of putrescine and spermidine significantly decreases the emission of the 2D halide perovskite at 496 nm, while the emission of the Eu3+-complex at 618 nm remains stable. The color changes of the probe depend on the concentration of putrescine and spermidine, and the assay offers linearity over a wide concentration range (30–4000 ng mL−1), a low detection limit (4 ng mL−1 for putrescine, and 7 ng mL−1 for spermidine), and a quick response time. Furthermore, a portable device based on a smartphone can be used to record the color change of the paper test strip using the prepared fluorescent materials. The fluorescence quenching mechanism of the probe is explained as dynamic quenching. [ABSTRACT FROM AUTHOR]

MicroRNAs (miRNAs) have emerged as a promising class of biomarkers for early detection of various cancers, including ovarian cancer. However, quantifying miRNAs in human blood samples is challenging owing to the issues of sensitivity and specificity. In this study, hsa-miR-200a-3p of the miR-200a sub-family, which is a biomarker of ovarian cancer, was used as the analyte to demonstrate the analytical capability of an integrated biosensing platform using an extremely sensitive surface-enhanced Raman scattering (SERS) nanotag−nanoaggregate-embedded beads (NAEBs), magnetic nanoparticles (MNPs), a pair of highly specific locked nucleic acid (LNA) probes, and a semi-automated paper-based electrowetting-on-dielectric (pEWOD) device to provide labor-less and thorough sample cleanup and recovery. A sandwich approach where NAEBs are modified by one LNA-1 probe and MNPs are modified by another LNA-2 probe was applied. Then, the target analyte miRNA-200a-3p was introduced to form a sandwich nanocomplex through hybridization with the pair of LNA probes. The pEWOD device was used to achieve short cleanup time and good recovery of the nanocomplex, bringing the total analysis time to less than 30 min. The detection limit of this approach can reach 0.26 fM through SERS detection. The versatility of this method without the need for RNA extraction from clinical samples is expected to have good potential in detecting other miRNAs. [ABSTRACT FROM AUTHOR]

The regular and on-site monitoring of ions in drinking water is essential for safeguarding public health, ensuring high water quality, and preserving the ecological balance of aquatic ecosystems. Thus, developing a portable analytical device for the rapid, cost-effective, and visual on-site detection of multiple environmental pollutants is notably significant. In the present work, a novel ratiometric microfluidic paperbased analytical device (µPAD) was designed and developed for the simultaneous detection of Fe3+ and Cu2+ ions in water samples taking advantages from built-in masking zone. The µPAD was functionalized with a greenish-yellow fluorescent Zn-based metal-organic framework@tetracycline (FMOF-5@TC) nanocomposite, and the ratiometric design was based on the change in emission color from greenish yellow (FMOF-5@TC) to blue (FMOF-5). The µPAD consisted of one sample zone linked to two detection zones via two channels: the first channel was for the detection of both ions, while the second was intended for detecting only Cu2+ ions and comprised a built-in masking zone to remove Fe3+ ions prior to reaching the detection zone. The corresponding color changes were recorded with the aid of a smartphone and RGB calculations. The linear ranges were 0.1-80 µM for Cu2+ and 0.2-160 µM for Fe3+, with limits of detection of 0.027 and 0.019 µM, respectively. The simple µPAD design enabled the simultaneous detection of Cu2+ and Fe3+ ions in drinking water samples with excellent accuracy and precision, with spike recoveries of 81.28-96.36% and 83.01-102.33% for Cu2+ and Fe3+, respectively. [ABSTRACT FROM AUTHOR]

Multiple protocols have been reported to fabricate paper-based analytical devices (PADs). However, some of these techniques must be revised because of the instrumentation required. This paper describes a versatile and globally affordable method to fabricate PADs using office paper as a substrate and a laser printing technique to define hydrophobic barriers on paper surfaces. To demonstrate the feasibility of the alternatives proposed in this study, the fabrication of devices for three types of detection commonly associated with using PADs was demonstrated: colorimetric detection, electrochemical detection, and mass spectrometry associated with a paper-spray ionization (PSI-MS) technique. Besides that, an evaluation of the type of paper used and chemical modifications required on the substrate surface are also presented in this report. Overall, the developed protocol was suitable for using office paper as a substrate, and the laser printing technique as an efficient fabrication method when using this substrate is accessible at a resource-limited point-of-need. Target analytes were used as a proof of concept for these detection techniques. Colorimetric detection was carried out for acetaminophen, iron, nitrate, and nitrite with limits of detection of 0.04 μg, 4.5 mg mL−1, 2.7 μmol L−1, and 6.8 μmol L−1, respectively. A limit of detection of 0.048 fg mL−1 was obtained for the electrochemical analysis of prostate-specific antigen. Colorimetric and electrochemical devices revealed satisfactory performance when office paper with a grammage of 90 g m−2 was employed. Methyldopa analysis was also carried out using PSI-MS, which showed a good response in the same paper weight and behavior compared to chromatographic paper. [ABSTRACT FROM AUTHOR]

Paper-based ratiometric fluorescence sensors are normally prepared using two or more types of fluorescent materials on a paper chip for simple, low-cost and fast detection. However, the choice of multi-step and one-step modifications on the paper chip affects the analytical performance. Herein, a novel paper-based dual-emission ratiometric fluorescence sensor was designed for the selective detection of tetracycline (TC). Carbon dots (CDs) modified with Eu3+ were combined with a sealed paper-based microfluidic chip by two methods: one-step grafting of CDs-Eu3+ on paper and step-by-step grafting of CDs and Eu3+ on paper. The analytical performance was studied and optimized respectively. The red fluorescence of Eu3+ at 450 nm is enhanced and the blue fluorescence of CDs at 617 nm is quenched by energy transfer in the presence of TC. Under optimal conditions, TC is selectively determined in the linear range from 0.1 μM to 100 μM with a detection limit of 0.03 μM by the step-by-step grafting method. In addition, the sealed paper chip could effectively prevent pollution and volatilization from the reagent. This technique has been used to analyze TC in seafood aquaculture water with satisfactory results. [ABSTRACT FROM AUTHOR]

This paper reports a spin-disc paper-based device with 10 individual detection units containing electromagnetic modules controlling the sample incubation time before chemiluminescence (CL) signal detection. After the sample was added to the top paper chip and incubated with the enzyme, the electromagnet was turned off to allow contact between the top and bottom paper. The H2O2 generated by the sample flowed vertically to the bottom paper and initiated the oxidase of the luminol to generate the CL signal. After one detection the disc was automatically rotated to the next position to repeat the above detection. The advantage of using the device over the lateral flow and the in situ detection was firstly proved using the detection of H2O2 and the glucose/lactate sample with 5 minute incubation. The CL intensity was increased 300 times/1000 times as the glucose/lactate was incubated for 5 minutes compared to the non-incubated samples. Afterward, the device was employed to separately detect glucose and lactate diluted in PBS, artificial sweat, artificial saliva, and fresh cell culture media. Finally, the device was employed to detect the glucose and lactate in the media collected over the 24 hour culture of PC3 cells. The uptake and production rates of glucose and lactate were correspondingly determined as 0.328 ± 0.015 pmol h−1 per cell and 1.254 ± 0.053 pmol h−1 per cell, respectively. The reported device has wide application potential due to its capabilities in automatic detection of multiple samples with very high sensitivity and small sample volume (down to 0.5 μL). [ABSTRACT FROM AUTHOR]

Exosomal microRNAs (miRNAs) play a pivotal role in intercellular communication, regulating gene expression in target cells, and hold significant promise as cancer biomarkers for early detection and screening. However, achieving precise and viable detection of exosomal miRNAs remains a challenge. This paper proposes an all-in-one detection strategy for breast cancer-derived exosomal miRNA-21 on a pen-based paper chip (PPC). The PPC is constructed using a modified automatic pen and lateral flow assay (LFA), which results in a cost-effective fabrication process. The user only needs to add the sample and trigger the top of the self-contained PPC after a period of time to complete the entire detection process. To enhance the sensitivity of exosomal miRNA testing, an enzyme-free catalyzed hairpin assembly (CHA) is further introduced, enabling highly sensitive detection of miRNA-21 with a limit of detection (LOD) of 25 fmol. Additionally, the detection of miRNAs in differentially-expressed cells and clinical samples has also been successfully achieved with high specificity. Overall, the proposed PPC provides an effective tool for detecting early cancer, monitoring diseases, and establishing point of care testing (POCT). [ABSTRACT FROM AUTHOR]

Developing a fluidic platform that combines high-throughput with reconfigurability is essential for a wide range of cutting-edge applications, but achieving both capabilities simultaneously remains a significant challenge. Herein, we propose a novel and unique method for droplet manipulation via drawing surface charge graphics on electrode-free papers in a contactless way. We find that opposite charge graphics can be written and retained on the surface layer of porous insulating paper by a controlled charge depositing method. The retained charge graphics result in high-resolution patterning of electrostatic potential wells (EPWs) on the hydrophobic porous surface, allowing for digital and high-throughput droplet handling. Since the charge graphics can be written/projected dynamically and simultaneously in large areas, allowing for on-demand and real-time reconfiguration of EPWs, we are able to develop a charge-graphic fluidic platform with both high reconfigurability and high throughput. The advantages and application potential of the platform have been demonstrated in chemical detection and dynamically controllable fluidic networks. [ABSTRACT FROM AUTHOR]

Fast detection of contaminants of emerging concern (CECs) in water resources is of great environmental interest. Ideally, sustainable materials should be used in water quality monitoring technologies implemented for such purposes. In this regard, the application of bio-based materials aimed at the fabrication of analytical platforms has become of great importance. This research merges both endeavors by exploring the application of chitosan-coated paper, decorated with silver nanoparticles (AgNPs), on surface-enhanced Raman scattering (SERS) spectroscopy studies of two distinct types of CECs dissolved in aqueous samples: an antibiotic (ciprofloxacin) and a pesticide (thiram). Our results indicate the superior SERS performance of biocoated substrates compared to their non-coated paper counterparts. The detection limits achieved for thiram and ciprofloxacin using the biocoated substrates were 0.024 ppm and 7.7 ppm, respectively. The efficient detection of both analytes is interpreted in terms of the role of the biopolymer in promoting AgNPs assemblies that result in local regions of enhanced SERS activity. Taking advantage of these observations, we use confocal Raman microscopy to obtain Raman images of the substrates using ciprofloxacin and thiram as molecular probes. We also demonstrate that these biobased substrates can be promising for on-site analysis when used in conjunction with portable Raman instruments. [ABSTRACT FROM AUTHOR]

Albuminuria is a clinical condition associated with poor kidney function, diagnosed by determining the ratio of albumin to creatinine concentrations in patient urine samples. We present a high-throughput paper spray mass spectrometry (PS-MS) method for simultaneous quantitation of urinary albumin and creatinine for potential diagnosis of albuminuria. Minimal (urine dilution) or no sample preparation is required. The analytical performance of the method was evaluated, achieving linear calibration curves (R2 > 0.99) with little inter-day variability in the slope (N = 5 days), exhibiting coefficient of variation (CV) of 8% and 3% for albumin and creatinine, respectively. LOD and LOQ for albumin were 2.1 and 7.0 mg L−1, and for creatinine were 0.01 and 0.03 mmol L−1, respectively. Intra- and inter-day (N = 5) precisions (%CV) and accuracies (%bias) were <10% and ±11%, respectively, for both analytes. The method was applied to determine albumin-to-creatinine ratios in anonymous human patient urine samples (N = 56), and a correlation of R2 = 0.9744 was achieved between the PS-MS results and validated clinical method results. This work demonstrates the utility of PS-MS to simultaneously quantify a large (albumin) and a small (creatinine) molecule directly in patient urine samples, and its potential as a tool for clinical albuminuria diagnostics. [ABSTRACT FROM AUTHOR]

A novel, biodegradable substrate based, and cost-effective flexible electrochemical sensor was developed for the highly selective and sensitive detection of one of the major neurotransmitters, dopamine, which can be utilised as a disposable electrode for point-of-care diagnostic applications. The active material CuSnB decorated over cellulose paper exhibits good sensitivities of 3.92 μA μM−1 cm−2 with a limit of detection of 0.5 nM. Moreover, the flexible sensor demonstrated superior selectivity towards co-existing metabolites such as ascorbic acid, glucose, and uric acid, in addition to stability at various mechanical deformations. [ABSTRACT FROM AUTHOR]

The water-soluble bromophenoxy-substituted naphthalimide derivative 1 and its copolymer P1 with acrylamide were synthesized and the photophysical properties of their host–guest complexes with cucurbit[8]uril (CB[8]) were studied. Notably, the host–guest complex CB[8]·1 showed long-lived RTP on filter paper and demonstrated a humidity response, making it suitable for use as an encryption ink. Furthermore, the solid powder of the host–guest complex between P1 and CB[8] exhibited a 4 s afterglow emission. [ABSTRACT FROM AUTHOR]

It is significant to develop low-cost and highly efficient electrocatalysts for the hydrogen evolution reaction (HER) via electrochemical water splitting. Herein, we constructed P-doped NiCo2S4 nanowire arrays on carbon fiber paper (NiCo2S4−xPx/CFP) as a HER electrocatalyst in both acidic and alkaline media. Benefitting from P doping into NiCo2S4, the as-prepared NiCo2S4−xPx/CFP exhibits low HER overpotentials of 80 and 132 mV in acidic and alkaline media at a cathodic current density of 10 mA cm−2, respectively, which are far superior to counterparts of NiCo2S4 nanowire arrays on the carbon fiber paper (NiCo2S4/CFP). Meanwhile, the NiCo2S4−xPx/CFP presents excellent HER stability of 20 hours in acidic and alkaline media. From the results of density functional theory calculations, P doping can not only optimize the hydrogen adsorption energetics on each kind of atomic site of catalysts, but also strengthen the H2O molecule binding ability on the catalyst surface for the alkaline HER and favor kinetics of hydrogen adsorption and H2 formation on the catalyst surface for the acidic HER, eventually improving overall HER performances. The investigation of the HER mechanism modulated by P doping in our work offers novel inspiration to develop highly efficient ternary metal sulfides for the HER. [ABSTRACT FROM AUTHOR]

The effective integration of nanomaterials with underlying current collectors is a key factor affecting the performance of nonenzymatic glucose sensors, where an inappropriate integration structure often leads to poor electron transport and instability. In this work, a seamless integrated electrode was constructed by the in situ immobilizing of a nickel-based metal-organic framework (Ni-MOF) on a three-dimensional (3D) conductive nickel foam (NF) for highly sensitive and durable glucose sensing. Facilitated by a rapid microwave-assisted reaction, a robust interfacial interaction between the Ni-MOF and the substrate was established through in situ conversion from nickel oxide (NiO). The fabricated Ni-MOF/NF electrode exhibits an excellent limit of detection (LOD) of 2.65 μM and an impressive sensitivity (14.31 mA cm-2 mM-1) within the linear range (4-576 μM), which is significantly boosted compared with that of an electrode prepared by a typical drop-casting method (3.56 mA cm-2 mM-1 in 4-1836 μM). Characterization and electrochemical tests reveal that this integrated structure on the one hand contributes to fast electron transport and thus has enhanced sensitivity and on the other hand leads to exceptional durability with its structural integrity maintained under bending, shaking, and ultrasonication. Moreover, this seamless integration method was also employed to immobilize the Ni-MOF converted from the pre-chemically deposited NiO layer on another type of substrate, 3D carbon paper (CP), demonstrating the versatility of this facile strategy in creating diverse electrochemical electrodes for applications beyond glucose sensing. [ABSTRACT FROM AUTHOR]

The document is a contents list for the New Journal of Chemistry, a publication that aims to connect the world with the chemical sciences. It provides information about the articles and papers included in the journal's latest issue. The articles cover a range of topics in chemistry, including the structural basis for Cu(II) metallocycle hexamer formation, photocatalyst-free hydrothiolation of gem-difluoroalkenes with thiols, and the construction of an alkynyl-containing porous polymer for enhanced photocatalytic H2O2 generation. The journal also invests its profits back into the chemistry community. Additionally, the document includes a correction to a previous paper on the effect of electrolyte optimization. [Extracted from the article]

This document is a contents list for the journal "Dalton Transactions: An International Journal of Inorganic Chemistry." It provides a list of articles published in the journal, covering various topics in inorganic chemistry. The journal is published by The Royal Society of Chemistry, a reputable chemistry community. The document includes research papers on topics such as catalysis, spin state switching, targeted therapy for breast cancer, and photocatalysis. It also includes an expression of concern and a correction for previous papers. [Extracted from the article]

The New Journal of Chemistry, published by The Royal Society of Chemistry and the Centre National de la Recherche Scientifique, contains a variety of research papers on topics such as graphite exfoliation, EPR characterization of N-oxyl radicals, anticancer efficacy, protoplast regeneration, semiconducting carbon nanotubes, and electrochemical sensing. The journal aims to provide new directions in chemistry and offers valuable insights and research findings for library patrons conducting research in these areas. The document is a list of papers published in the journal, covering a range of topics in chemistry and materials science, including pH-responsive nanotheranostics, synthesis of fused molecules, removal of tetracycline from water, and comparison of different species using UPLC-Q-TOF-MS. [Extracted from the article]

This review article provides a thorough overview of barrier coating materials that have been used in food packaging with a focus on biodegradable (bio-based or petroleum-based) materials, such as lipids, proteins, polysaccharides, agriculture waste and polyesters. The goal is to provide an opportunity to acknowledge progress made in this field, focusing on modifications made to coatings. These modifications aim to address the shortcomings of biodegradable substrates (either plastic or paper) and improve their performance, enabling them to compete with traditional petroleum-based food packaging materials. This includes their barrier against water vapor and oxygen, mechanical and surface characteristics (sealability and adhesion), as well as antimicrobial properties. The barrier of most biodegradable polymers underperforms in comparison with petroleum-based non-biodegradable polymers, which possess either high water vapor barrier or high oxygen barrier. Coating technology is a promising solution particularly in barrier improvement of biodegradable polymers. Currently, there are only metallized, or inorganic nanosheet coatings available for biodegradable films that meet food packaging requirements. There are some challenges in this field, for example, being able to retain the coating's biodegradability despite applied modifications to improve it's performance, the large-scale fabrication of biodegradable coatings, the coating's delamination and heat-sealability during service time, and the migration of the coating into the packaged food. Moreover, green chemistry and its sustainability needs in biodegradable polymeric coatings are also discussed regarding new ideas and possible directions for widespread application of coatings in food packaging. This is the first review that specifically summarizes biodegradable coatings on plastic and paper substrates with a focus on coating modifications to improve the performance of the base substrate to meet the required properties for food packaging applications. [ABSTRACT FROM AUTHOR]

In this paper, we present Raman imaging as a non-invasive approach for studying changes in mitochondrial metabolism caused by cardiolipin–cytochrome c interactions. We investigated the effect of mitochondrial dysregulation on cardiolipin (CL) and cytochrome c (Cyt c) interactions for a brain cancer cell line (U-87 MG). Mitochondrial metabolism was monitored by checking the intensities of the Raman bands at 750 cm−1, 1126 cm−1, 1310 cm−1, 1337 cm−1, 1444 cm−1 and 1584 cm−1. The presented results indicate that under pathological conditions, the content and redox status of Cyt c in mitochondria can be used as a Raman marker to characterize changes in cellular metabolism. This work provides evidence that cardiolipin–cytochrome c interactions are crucial for mitochondrial energy homeostasis by controlling the redox status of Cyt c in the electron transport chain, switching from disabling Cyt c reduction and enabling peroxidase activity. This paper provides experimental support for the hypothesis of how cardiolipin–cytochrome c interactions regulate electron transfer in the respiratory chain, apoptosis and mROS production in mitochondria. [ABSTRACT FROM AUTHOR]

The document is a contents list for the New Journal of Chemistry, a publication by The Royal Society of Chemistry and the Centre National de la Recherche Scientifique. It features a variety of articles and papers covering topics such as anti-counterfeiting printing, monitoring platinum(IV) complexes, and the removal of uranium from the kidneys. The journal also provides information on training courses and resources for professional development in chemistry. The papers offer valuable insights and advancements in the field, making it a valuable resource for researchers and professionals in chemistry. [Extracted from the article]

The document is a contents list for the journal "Dalton Transactions: An International Journal of Inorganic Chemistry." It includes the titles and authors of various articles published in the journal, covering topics such as sulphur spectrum of trivalent lanthanoid oxysulphides, magnetic relaxation in manganese coordination compounds, CO2 absorption/desorption properties, and more. The journal is published by The Royal Society of Chemistry, a leading chemistry community. The papers in this journal cover a wide range of topics in inorganic chemistry, including battery technology, catalysis, materials science, and theoretical analysis of metal complexes. These papers provide valuable insights into scientific phenomena and offer potential applications in various fields. [Extracted from the article]

The New Journal of Chemistry, published by The Royal Society of Chemistry and the Centre National de la Recherche Scientifique, has released a list of papers published in 2024. These papers cover a wide range of topics in the field of chemistry, including photothermal properties of MXenes, pseudomorphic transformation of silica, and adsorption behavior of chloramphenicol. Other papers explore drug abuse detection in hair samples, photocatalytic performance, small-molecule tracer imaging, catalytic studies, colorimetric sensing, and more. These papers offer valuable research and insights in various areas of chemistry. [Extracted from the article]

The aim of this paper is to evaluate the quality of 13 batches of rice and 17 batches of paddy. Differential scanning calorimetry curves, Fourier transform infrared spectroscopy, ultraviolet spectroscopy and electrochemical curves of 30 batches of rice and paddy were collected, and this paper utilized the quantitative fingerprints evaluated by using the systematic quantitative fingerprinting method, macro qualitative similarity (S m) and macro quantitative similarity (P m) to reflect the internal differences of the samples. A new quality assessment method was explored to quantify the obtained fingerprint profiles and to compare the correlation between the original fingerprints and the quantum fingerprints using a t-test. Using the parameters S m and P m as analysis criteria, hierarchical clustering analysis (HCA), orthogonal partial least squares discriminant analysis (OPLS-DA) and the equal-weight integrated evaluation method were used to evaluate the quality of the four analysis methods. [ABSTRACT FROM AUTHOR]

The document is a contents list for the journal "Green Chemistry," published by the Royal Society of Chemistry. It features cutting-edge research on sustainable chemistry and a greener future. The contents list includes articles on topics such as electrosynthesis, sustainable chemical synthesis, corrosion science, lignin modification, and more. The journal aims to connect the world with the chemical sciences and invest profits back into the chemistry community. This document is a list of papers published in the journal Green Chemistry. The papers cover a range of topics related to sustainable and environmentally friendly chemistry. Some of the topics include the efficient fractionation of hemicellulose from hardwood pulp, the synthesis of fructose-based surfactants, and the electrochemical synthesis of formaldehyde. The papers provide valuable research for library patrons interested in these specific areas of study. [Extracted from the article]

Wearable devices are gaining popularity in the fields of health monitoring, diagnosis, and drug delivery. Recent advances in wearable technology have enabled real-time analysis of biofluids such as sweat, interstitial fluid, tears, saliva, wound fluid, and urine. The integration of microfluidics and emerging smart technologies, such as artificial intelligence (AI), machine learning (ML), and Internet of Things (IoT), into wearable devices offers great potential for accurate and non-invasive monitoring and diagnosis. This paper provides an overview of current trends and developments in microfluidics and smart technologies in wearable devices for analyzing body fluids. The paper discusses common microfluidic technologies in wearable devices and the challenges associated with analyzing each type of biofluid. The paper emphasizes the importance of combining smart technologies with microfluidics in wearable devices, and how they can aid diagnosis and therapy. Finally, the paper covers recent applications, trends, and future developments in the context of intelligent microfluidic wearable devices. [ABSTRACT FROM AUTHOR]

This document is a contents list for the journal "Dalton Transactions: An International Journal of Inorganic Chemistry." It provides a list of papers published in the latest issue of the journal, covering a wide range of topics in chemistry. The papers explore subjects such as stimuli-responsive luminescence, the synthesis and reactivity of different compounds, and the development of new sensors, luminescent materials, catalysts, and coordination compounds. The journal aims to foster connections within the global chemistry community and reinvest its profits into the field. Additionally, the document includes a correction for a previous paper. [Extracted from the article]

This document is a contents list for the New Journal of Chemistry, a publication by The Royal Society of Chemistry and the Centre National de la Recherche Scientifique. It provides a list of articles and papers featured in the latest issue of the journal, covering a diverse range of topics in chemistry. Some of the topics include enantioselective insertion of vinyl diazoacetates, building a data science toolbox for designing catalysts, and the synthesis and coordination behavior of a ferrocene phosphinostibine. The document also includes a correction to a previously published paper. [Extracted from the article]

This document is a contents list for the journal "Green Chemistry," published by the Royal Society of Chemistry. It features research papers on various topics related to sustainable chemistry, including photocatalytic upgrading of hydroxymethylfurfural, lignin extraction and nanodispersion, selenium-doped carbon materials, and the valorization of bio-renewable glycerol. The journal also includes tutorial reviews on topics such as Pickering emulsion-derived nano/microreactors and the iron ligand-to-metal charge transfer chemistry in water. Additionally, there are perspective papers, communications, and other research papers covering a range of subjects in green chemistry. The papers provide valuable insights into the development of greener and more sustainable chemical processes. [Extracted from the article]

This document is a contents list for the journal "Dalton Transactions: An International Journal of Inorganic Chemistry." It features a compilation of research papers covering various topics such as metal dioxo complexes, piezo-photocatalytic CO2 reduction, and carbonaceous materials for lithium-ion batteries. The journal aims to foster connections within the chemistry community and stimulate innovative ideas. Additionally, the document includes corrections to two previously published papers. [Extracted from the article]

With the advent of lithium-ion batteries (LIBs), the selection and application of electrode materials have been the subject of much discussion and study. Among them, graphite has been widely investigated for use as electrode materials in LIBs due to its abundant resources, low cost, safety and electrochemical diversity. While it is commonly recognized that conventional graphite materials utilized for commercial purposes have a limited theoretical capacity, there has been a steady emergence of new and improved carbonaceous materials for use as anodes in light of the progressive development of LIBs. In this paper, the latest research progress of various carbon materials in LIBs is systematically and comprehensively reviewed. Firstly, the rocking chair charging and discharging mechanism of LIBs is briefly introduced in this paper, using graphite anodes as an example. After that, the general categories of carbonaceous materials are highlighted, and the recent research on the recent progress of various carbonaceous materials (graphite-based, amorphous carbon-based, and nanocarbon-based) used in LIB anodes is presented separately based on the classification of the structural morphology, emphasizing the influence of the morphology and structure of carbon-based materials on the electrochemical performance of the batteries. Finally, the current challenges of carbonaceous materials in LIB applications and the future development of other novel carbonaceous materials are envisioned. [ABSTRACT FROM AUTHOR]

The document is a contents list for the journal "Dalton Transactions: An International Journal of Inorganic Chemistry." It includes various articles and papers on topics such as molecular transition metal catalysts, spectroscopic techniques, synthesis of materials, and studies on different compounds. The journal aims to connect the global chemistry community and invest its profits back into the field. This document is a list of research papers published in the journal Dalton Transactions. The papers cover a range of topics including electrocatalytic reduction of CO2, assembly of clusters, rechargeable batteries, and carbon nanoarchitectures. Each paper is summarized by its title and authors, providing a brief overview of the research topic. The document is a valuable resource for library patrons conducting research in various scientific fields. [Extracted from the article]

The document is a contents list for the journal "Dalton Transactions: An International Journal of Inorganic Chemistry." It includes various articles and papers on topics such as copper complexes, lanthanide-based POMs, and coordination polymers. The journal is published by The Royal Society of Chemistry, a leading chemistry community. The document also mentions approved training courses offered by the society. The given document is a list of papers published in the journal Dalton Transactions. The papers cover a range of topics in chemistry, including catalysis, phosphors, materials synthesis, and more. Each paper is identified by its title, authors, and page number. The document also includes a correction and a retraction for two previously published papers. [Extracted from the article]

The New Journal of Chemistry is a publication that focuses on the chemical sciences and aims to connect researchers worldwide. The document provided is a contents list for the journal's 2024 edition. It includes papers on various topics such as membrane modification, nanoparticle synthesis, targeted therapy, catalysis, and material properties. Two specific papers are highlighted: one discusses the use of cationic lipids in non-viral gene delivery, while the other explores the confinement of metal-organic framework (MOF) etching-induced hollow structures for enhanced activation of peroxymonosulfate. The journal is published by The Royal Society of Chemistry and the Centre National de la Recherche Scientifique. [Extracted from the article]

The document is a contents list for the journal "Dalton Transactions: An International Journal of Inorganic Chemistry." It includes various articles and papers on topics such as combatting bacterial infections, rare-earth metal-organic frameworks, and electrochemical capacitor applications. The journal is published by The Royal Society of Chemistry, a leading chemistry community. The document provides a brief overview of the articles included in the journal issue. The papers cover a range of topics in chemistry, including the synthesis of stable cyclopropenylvinyl ligands, the properties of metal-organic frameworks, the photocatalytic performance of titanium-oxide clusters, and the adsorption mechanisms of heavy metals on silica. Other topics include the synthesis of coordination polymers, the synthesis of salophen complexes, and the behavior of cyanido-bridged complexes. The papers provide valuable insights into various areas of chemical research. [Extracted from the article]

This paper investigates the synthesis, crystal structure, thermal properties, and energetic performance of two 1D coordination polymers (CPs). The CPs, namely, [Zn(atrz)(DNBA)2(H2O)2]n (1) and [Cd(atrz)(DNBA)2(H2O)2]n (2), were designed and synthesized based on the nitrogen-rich ligand 4,4′-azobis-1,2,4-triazole (atrz) and 3,5-dinitrobenzoic acid (HDNBA) via a mixed ligand strategy using a simple and environment-friendly method. The CPs were characterized by various spectroscopic and analytical techniques along with single-crystal X-ray diffraction (SCXRD). SCXRD analysis reveals a distorted octahedral geometry around the metal ions (Zn/Cd), leading to the formation of a 1D coordination polymer while constructing a 2D structural framework through intermolecular hydrogen bonding. Both the CPs exhibit similar thermal stability but considerably differ in their heat of formation values (1 = −894.43, 2 = 1635.93 kJ mol−1). CP 2 has higher detonation velocity (7.24 km s−1) and pressure (23.67 GPa) compared to 1 (detonation velocity: 6.28 km s−1, detonation pressure: 17.57 GPa) owing to its higher heat of formation and density. Both the CPs exhibit ideal insensitivity to friction and impact stimuli, ensuring their safety during transportation and processing. The value of average activation energy obtained from isoconversion ASTM E698 for 1 and 2 was reported to be 143.8 and 168.0 kJ mol−1, respectively. This study explores the development of energetic CPs through the mixed ligand strategy based on the atrz ligand and incorporating HDNBA as the co-ligand to reduce the sensitivity while maintaining the comparable energetic performance of previously reported atrz-based complexes. This paper also highlights the potential use of CPs as explosives by demonstrating higher energetic performance. [ABSTRACT FROM AUTHOR]

This paper introduces a two-inlet, one-outlet lung-on-a-chip device with semi-circular cross-section microchannels and computer-controlled fluidic switching that enables a broader systematic investigation of liquid plug dynamics in a manner relevant to the distal airways. A leak-proof bonding protocol for micro-milled devices facilitates channel bonding and culture of confluent primary small airway epithelial cells. Production of liquid plugs with computer-controlled inlet channel valving and just one outlet allows more stable long-term plug generation and propagation compared to previous designs. The system also captures both plug speed and length as well as pressure drop concurrently. In one demonstration, the system reproducibly generates surfactant-containing liquid plugs, a challenging process due to lower surface tension that makes the plug formation less stable. The addition of surfactant decreases the pressure required to initiate plug propagation, a potentially significant effect in diseases where surfactant in the airways is absent or dysfunctional. Next, the device recapitulates the effect of increasing fluid viscosity, a challenging analysis due to higher resistance of viscous fluids that makes plug formation and propagation more difficult particularly in airway-relevant length scales. Experimental results show that increased fluid viscosity decreases plug propagation speed for a given air flow rate. These findings are supplemented by computational modeling of viscous plug propagation that demonstrates increased plug propagation time, increased maximum wall shear stress, and greater pressure differentials in more viscous conditions of plug propagation. These results match physiology as mucus viscosity is increased in various obstructive lung diseases where it is known that respiratory mechanics can be compromised due to mucus plugging of the distal airways. Finally, experiments evaluate the effect of channel geometry on primary human small airway epithelial cell injury in this lung-on-a-chip. There is more injury in the middle of the channel relative to the edges highlighting the role of channel shape, a physiologically relevant parameter as airway cross-sectional geometry can also be non-circular. In sum, this paper describes a system that pushes the device limits with regards to the types of liquid plugs that can be stably generated for studies of distal airway fluid mechanical injury. [ABSTRACT FROM AUTHOR]

Rapid, sensitive, and quantitative detection of biomarkers is needed for early diagnosis of disease and surveillance of infectious outbreaks. Here, we exploit a plasmonic syringe filter and surface-enhanced Raman spectroscopy (SERS) in the development of a rapid detection system, using human IgG as a model diagnostic biomarker. The novel assay design facilitates multiple passages of the sample and labeling solution through the detection zone enabling us to investigate and maximize sampling efficiency to the capture substrate. The vertical flow immunoassay process in this study involves the utilization of filter paper embedded with gold nanoparticles (AuNPs) to form a plasmonic substrate. Capture antibody (anti-human IgG) is then immobilized onto the prepared plasmonic paper and inserted into a vertical flow device (syringe filter holder). Sample solution is passed through the filter paper and the target antigen (human IgG) is selectively captured by the immobilized antibody to form an antibody–antigen complex. Next, functionalized AuNPs as extrinsic Raman labels (ERLs) are passed through the filter paper to label the captured biomarker molecules forming a layered structure. This sandwiched geometry enhances plasmonic coupling and SERS signal to provide highly sensitive detection of biomolecules. Systematic studies to investigate the impact of multiple infuse/withdraw cycles of the sample and labeling solutions reveal that antigen and ERL binding are maximized with 10 and 20 cycles, respectively. The optimized assay achieves a detection limit of ∼0.2 ng mL−1 for human IgG with a total assay time of less than 5 minutes, meeting the demands for rapid point of care diagnostics. Additionally, the optimized platform was implemented in the quantitative analysis of the SARS-CoV-2 nucleocapsid protein, the typical target in commercial, FDA-approved rapid antigen tests for COVID-19. [ABSTRACT FROM AUTHOR]

In this paper, Tesla coil discharge (TCD) was combined with laser-induced breakdown spectroscopy (LIBS). The TCD successfully enhanced the emission of Al atomic lines and AlO molecular bands in Al LIBS, and improved the sensitivity of quantitative analysis of Cr and Pb elements detected by LIBS in water. Firstly, the paper explored the effect of the distance from the TCD tip to the sample surface on the emission of Al atomic lines and AlO molecular bands, finding that 5 mm was the optimal distance. Secondly, the paper investigated the effect of laser energy on the emission of Al atomic lines and AlO molecular bands, finding that 25.1 mJ was the optimal laser energy. Finally, the paper constructed the calibration curves of Cr and Pb elements in water and calculated the limit of detection (LoD), finding that compared with surface enhanced LIBS (SELIBS), TCD–SELIBS reduced the LoDs of Cr and Pb elements from 16.7 ng mL−1 and 12.2 ng mL−1 to 7.3 ng mL−1 and 5.5 ng mL−1, respectively. It indicated that the combination of TCD and SELIBS can achieve high-sensitivity detection of Cr and Pb elements in the water. The combination of TCD and LIBS is a simple, low-cost, easy-to-operate, industrialized and commercialized technology, and has a promising application prospect in the high-sensitivity analysis of heavy metals in water. [ABSTRACT FROM AUTHOR]

The paper demonstrates an adaptation of a 3D printer (Prusa Mini+) with novel modules to develop a droplet generation system that generates combinatorial droplets from a standard 96 well plate. The calibration methodology developed would allow any fused deposition modeling (FDM) printer to generate monodisperse droplets (coefficient of variance (CV%) < 5%) from well plates or vials of any geometry. The system maintains precision across various volumes while maintaining a C.V. range of 0.81% to 3.61%, with an increased precision for larger volumes. The cost of the system developed is 70% less than commercially available droplet generation packages. Successful droplet library storage is accomplished via 3D printed cartridge connectors. The implemented system has been calibrated for Tygon® and PTFE at different velocities and volumetric configurations. [ABSTRACT FROM AUTHOR]

Antibiotics are commonly used as antibacterial medications due to their extensive and potent therapeutic properties. However, the overconsumption of these chemicals leads to their accumulation in the human body via the food chain, amplifying drug resistance and compromising immunity, thus presenting a significant hazard to human health. Antibiotics are classified as organic pollutants. Therefore, it is crucial to conduct research on precise methodologies for detecting antibiotics in many substances, including food, pharmaceutical waste, and biological samples like serum and urine. The methodology described in this research paper introduces an innovative technique for producing nanoparticles using silica as the shell material, iron oxide as the core material, and carbon as the shell dopant. By integrating a carbon-doped silica shell, this substance acquires exceptional fluorescence characteristics and a substantial quantum yield value of 80%. By capitalising on this characteristic of the substance, we have effectively constructed a fluorescent sensor that enables accurate ofloxacin analysis, with a detection limit of 1.3 × 10-6 M and a linear range of concentrations from 0 to 120 × 10-6 M. We also evaluated the potential of CSIONPs for OLF detection in blood serum and tap water analysis. The obtained relative standard deviation values were below 3.5%. The percentage of ofloxacin recovery from blood serum ranged from 95.52% to 103.28%, and from 89.9% to 96.0% from tap water. [ABSTRACT FROM AUTHOR]

Hydrogen, highly valued for its pristine cleanliness and remarkable efficiency as an emerging energy source, is anticipated to ascend to a preeminent status within the forthcoming energy landscape. Electrocatalytic water splitting is considered a pivotal, eco-friendly, and sustainable strategy for hydrogen production. The substantial energy consumption stemming from oxygen evolution side reactions significantly impedes the commercial viability of water electrolysis. Consequently, the pursuit of a cost-effective and efficacious oxygen evolution reaction (OER) catalyst stands as an imperative strategy for realizing hydrogen production via water electrolysis. Layered metal oxides, owing to their robust anisotropic properties, versatile adjustability, and extensive surface area, have emerged as suitable candidates for OER catalysts. However, owing to the distinctive attributes of layered metal oxides, ongoing investigations into these materials are slightly fragmented, lacking universal consensus. This article comprehensively surveys the recent advancements in layered metal oxide-based OER catalysts, categorized into single metal oxides, alkali cobalt oxides, perovskites, and miscellaneous metal oxides. Initially, the main OER intermediate reaction steps of layered metal oxides are scrutinized. Subsequently, the design, mechanism, and application of several pivotal layered metal oxides in the OER are systematically delineated. Finally, a summary is provided, alongside the proposal of future research trajectories and challenges encountered by layered metal oxides, with the aspiration that this paper may serve as a valuable reference for scholars in the field. [ABSTRACT FROM AUTHOR]

In this paper, a three-wavelength exciting and temperature-sensing Gd1.559Y0.03Lu0.02Er0.13Yb0.26Ho0.001O2S phosphor excited by 980 nm, 1064 nm and 1550 nm was prepared for the first time by a coprecipitationhigh temperature solid-state reaction (HSR). Three different up-conversion changes were observed with an increase in temperature under 980 nm, 1064 nm and 1550 nm laser excitation. The fluorescence intensity ratio (FIR) equations of the sample excited by 980 nm, 1064 nm and 1550 nm were obtained at 313-553 K. The three kinds of absolute sensitivity were 0.0016 (479 K), 0.0096 (553 K) and 0.1528 (553 K). The upconversion process excited by 980 nm, 1064 nm and 1550 nm laser radiation was analyzed and the causes of the three different changes are explained. The stability of the Gd1.559Y0.03Lu0.02Er0.13Yb0.26Ho0.001O2S phosphor as a temperature sensor was tested by a cyclic test. It is proved that the Gd1.559Y0.03Lu0.02Er0.13- Yb0.26Ho0.001O2S phosphor is a novel and valuable up-conversion optical temperature sensor. [ABSTRACT FROM AUTHOR]