Search

The purpose of this paper is to present an easily applied test useful in determining whether or not a supplier's data have been truncated. The proposed test has the following desirable properties: (I) it is the uniformly most powerful rank test, (ii) it is asymptotically uniformly most powerful, (iii) power computations can easily be made for arbitrary sample sizes, formulas for such computations being given in the paper. Although formulated in the context of verifying a supplier's data, the test can be applied to other situations in which false representation of data in the form of truncation is important. Such is the case, for example, in reliability demonstrations or legal suits involving physical measurements. [ABSTRACT FROM AUTHOR]

Given a population of N units, it is required to draw a sample of n distinct units in such a way that the probability for the ith unit to be in the sample is proportional to its 'size' x. From the alternative methods of achieving this we consider here only the so-called systematic method which, to the best of our knowledge, was first developed by W. G. Madow (1949): The units in the population are listed in a 'particular' order, their x, accumulated and a systematic selection of n elements from a 'random start' is then made on the accumulation. In a more recent paper (H. O. Hartley and J. N. K. Rao (1962) ) an asymptotic estimation theory (for large N) associated with this procedure was developed for the case when the order of the listed units is random. In this paper we draw attention to certain properties of Madow's estimator: We utilize the fact that with systematic sampling the total number of different samples is N (rather than ([This eq. cannot be change in char.]) as with completely random sampling). This simplification in the definition of the variance of the estimator in repeated sampling enables us to identify the exact variance of Madow's estimator with a 'between sample mean square' in a special analysis of variance (see section 4) and compare it with the variance of the pps estimator in sampling with replacement as well as in other sampling procedures. We also develop two approximate methods of variance estimation (see section 5). We pay particular attention to the case when the units are listed in the order of their size. With this particular arrangement our method can be described as 'systematic with random start' and the gain in precision that we accomplish has of course, analogues in systematic sampling with equal probabilities employing ratio estimators in which there is a relation between the ratio ri =yi/Xi and xi Compared with other methods the present procedure combines the advantage of ease of systematic sample selection with the availability of exact variance formulas for any n and N. Moreover, it usually leads to a more efficient estimate. Its shortcoming resides in the fact that the estimation of the variance is based on certain assumptions. [ABSTRACT FROM AUTHOR]

Let X[sub 1], ... , X[sub m] and Y[sub 1], ... , Y[sub n] be independent random samples from populations having continuous d.f.'s psi((x-micro)/sigma) and psi((y-nu)/tau) respectively. The classical F-test of a hypothesis concerning angle = tau/sigma is known to be non-robust. This paper examines several robust alternative procedures and compares them on the basis of Pitman a.r.e and Monte Carlo studies of power functions. An approximate permutation test [13] and a "jackknife" procedure [9] are found to be most satisfactory; while a class of "rank-like" tests [10] are found to be "useful inefficient statistics" [ABSTRACT FROM AUTHOR]

Let X[sub (1)] is less than or equal to X[sub (2] is less than or equal to ... is less than or equal to X[sub (n)] be an ordered sample of a random variable X which has continuous probability distribution function F (x), and let F[sub n] (x) be the corresponding empirical distribution function. The following three statistics, introduced by A. Renyi, are considered: [Multiple line equation(s) cannot be represented in ASCII text] The paper presents table of exact probabilities for these statistics for finite sample sizes. The limiting distributions of these statistics for sample size n arrow right Infinity are discussed, and sample sizes are indicated for which these limiting distributions can be used instead of the exact distributions. Numerical examples for the use of the tables are presented, as well as applications to testing hypotheses on life distributions and to one-sided estimation of probability distribution functions from censored data. [ABSTRACT FROM AUTHOR]

In this paper it is assumed that, using a sample survey, two factors are to be studied, comparisons between the "levels" of the factors are of greatest interest, and there is "interaction" between the factors. Attention is concentrated on situations in which only two levels of each factor are to be compared, but extensions to more complex surveys are discussed. Assuming independent sampling, optimal sample size allocations are obtained. Where these allocations require recourse to programming algorithms, approximate solutions are given. If independent sampling is not feasible, a double sampling procedure is suggested. To indicate how sub-sampling from the first phase sample is to be carried out, a sampling rule (possessing optimal conditional precision properties) is derived. Then, a procedure to determine the optimal first phase sample size is given. Finally, it is demonstrated that this double sampling procedure can be applied to estimation of the (finite) population mean when double sampling with stratification is used. [ABSTRACT FROM AUTHOR]

In this note we examine the bias and small sample efficiency of certain estimators for the parameters of a linear regression function when some observations are missing. The estimators studies in this paper were suggested by the large sample study reported in this issue of the Journal. We conclude that our asymptotically unbiased estimators of beta and mu[sub y|x], have negligible bias in sample sizes as small as n = 20, and that our asymptotically unbiased estimator of sigma[sup 2] may have an 8% bias when n = 20. The small sample and asymptotic efficiencies of these estimators are nearly the same for n = 60; when n = 20 the difference between these two efficiencies depends on the correlation coefficient rho and the pattern of missing observations. [ABSTRACT FROM AUTHOR]

Consider a clinical trial to compare two treatments where response is dichotomous and patients enter the trial sequentially. This paper investigates the conduct of such a trial where the "Play the Winner Rule" (PWR) is used to assign patients to the different therapies. The implementation of the PWR in a clinical trial tends to place more patients on the better treatment. Both theoretical and numerical investigations show that over a wide range of situations this rule leads to near optimum results when used in a two-stage manner. Furthermore, these results are insensitive to optimum sample size requirements. [ABSTRACT FROM AUTHOR]

This paper presents the results of a Monte Carlo study of the accuracy of an approximation to the power of the chi-square goodness of fit test with small but equal expected frequencies. Various combinations of sample size, number of groups, and alpha level are considered, and in most instances the actual power of the test is estimated to be less than the nominal power. The degree of accuracy appears to be more related to the size of the sample than to the size of the expected frequencies. The following rule of thumb is offered for obtaining crude estimates of the actual power from the nominal power for sample sizes from 10 to 50: The actual power of the test equals about eight-tenths of the nominal power. [ABSTRACT FROM AUTHOR]

This paper deals with estimating the location and the scale parameters of the extreme value distribution when the sample size is very large, using sample quantiles. An estimator is given for the location parameter when the scale parameter is known, based on one or more (up to 15) order statistics. Also given is an estimator for the scale parameter when the location parameter is known, built on two order statistics. An iterative procedure is utilized to estimate the parameters when both are unknown, using two order statistics. The problem of estimating the percentage point is also dealt with, and a comparison with Lieblein's method is included. [ABSTRACT FROM AUTHOR]

In this paper we examine how well the asymptotic null distribution of a two sample test due to Lehmann approximates the small sample distribution of the test, compare the validity of this Lehman test with the validity of the two sample t test under the null hypothesis of equal means, and compare the power of this Lehmannn test with the power of the t test. Our general conclusion is that experimenters will prefer to use the t test when the underlying distribution is the scale contaminated compound normal distribution and the sample sizes are less than thirty. [ABSTRACT FROM AUTHOR]

An algorithm for the determination of the economic design of X-charts based on Duncan's model is described in this paper. This algorithm consists of solving an implicit equation in design variables n (sample size) and k (control limit factor) and an explicit equation for h (sampling interval). The use of this algorithm not only yields the exact optimum but also provides valuable information so that the sensitivity of the optimum loss-cost (L*) can be evaluated. Loss-cost contours are used to discuss the nature of the loss-cost surface and the effect of the design variables. The effect of two parameters, the delay factor (e), and the average time for an assignable cause to occur (1/lambda), on the optimum design is evaluated. Numerical examples are used for illustrations. [ABSTRACT FROM AUTHOR]

A class of permutation tests based on appropriate U-statistics is proposed for the multisample location, scale, and association problems. These U-statistics need not be functions solely of the ranks of the different sample observations and for the application of the tests the parent distributions need not be continuous. The proposed tests are based on the existence of some equally likely permutations of the sample observations and are valid for small as well as large sample sizes. Further, the underlying permutation principle yields optimum estimators of the variances and covariances of U-statistics entering into the expressions for the test statistics. The large sample test procedure is thereby simplified. This paper consists partly of expository material and partly of extensions of some allied two-sample results, considered earlier by the author (Sen [28]). [ABSTRACT FROM AUTHOR]

This is an expository paper on the fixed sample size indifference zone formulation of the ranking and selection problem. A particularly simple proof of a theorem which is useful in this formulation is given, and its use is illustrated. [ABSTRACT FROM AUTHOR]

A common problem in many areas is to achieve a combination of control variables which will simultaneously maximize all of the responses which are functions of the control variables. The fact that in general we can not simultaneously maximize all of the responses has led to the formulation of compromise solutions to this vector maximum problem. A point in the control variable space is better than a second point if each response at the first point is greater than or equal to the corresponding response at the second point. If a point is such that there is no better point, it is said to be admissible, or efficient. A set of points is complete if given any point not in the set there is a point in the set which is better. In this paper this formulation is used to consider the allocation of sample size to several strata when there are several characteristics of interest. [ABSTRACT FROM AUTHOR]

The determination of sample size to meet certain probability requirements is a problem which often faces an experimenter when obtaining a confidence interval or testing a hypothesis. This paper includes some new graphs useful in selecting sample size and gives a reference to a new textbook which includes a number of other similar type graphs. The method of construction is explained in detail and examples are included. [ABSTRACT FROM AUTHOR]

The posterior distribution for parameters of a data distribution is usually the major objective of a Bayesian statistical analysis. Relatively little attention has been given to the fact that either a prior or a posterior distribution implies a marginal distribution, which may be called a "predictive distribution," for outcomes of any sample not yet observed. Predictive distributions have been mainly applied to design problems, such as determination of optimal sample size. In this paper tentative suggestions are made for applications to statistical inference, especially problems of appropriateness, selection, interpretation, and validation of formal models. [ABSTRACT FROM AUTHOR]