Search

The cost of specialized scientific equipment can be high and with limited funding resources, researchers and students are often unable to access or purchase the ideal equipment for their projects. In the fields of materials science and mechanical engineering, fundamental equipment such as tensile testing devices can cost tens to hundreds of thousands of dollars. While a research lab often has access to a large-scale testing machine suitable for conventional samples, loading devices for meso- and micro-scale samples for in-situ testing with the myriad of microscopy tools are often hard to source and cost prohibitive. Open-source software has allowed for great strides in the reduction of costs associated with software development and open-source hardware and additive manufacturing have the potential to similarly reduce the costs of scientific equipment and increase the accessibility of scientific research. To investigate the feasibility of open-source hardware, a micro-tensile tester was designed with a freely accessible computer-aided design package and manufactured with a desktop 3D-printer and off-the-shelf components. To our knowledge this is one of the first demonstrations of a tensile tester with additively manufactured components for scientific research. The capabilities of the tensile tester were demonstrated by investigating the mechanical properties of Graphene Oxide (GO) paper and thin films. A 3D printed tensile tester was successfully used in conjunction with an atomic force microscope to provide one of the first quantitative measurements of GO thin film buckling under compression. The tensile tester was also used in conjunction with an atomic force microscope to observe the change in surface topology of a GO paper in response to increasing tensile strain. No significant change in surface topology was observed in contrast to prior hypotheses from the literature. Based on this result obtained with the new open source tensile stage we propose an alternative hypothesis we term ‘superlamellae consolidation’ to explain the initial deformation of GO paper. The additively manufactured tensile tester tested represents cost savings of >99% compared to commercial solutions in its class and offers simple customization. However, continued development is needed for the tensile tester presented here to approach the technical specifications achievable with commercial solutions. [ABSTRACT FROM AUTHOR]

The effect of nanosilica particles on the water resistance of a polyurethane/nanosilica composite coated paper substrate was investigated. The polyurethane/nanosilica composite coating was prepared by dispersing nanosilica powder into solvent-based polyurethane using high mechanical stirring force. Paper substrate was coated with polyurethane/nanosilica composite using a Rod Mayer technique. Various compositions of polyurethane/nanosilica composite coatings on paper substrate were prepared. The total thickness of the paper coated with polyurethane/nanosilica composite was 0·3 mm. The field emission scanning electron microscopy images indicated that the presence of nanosilica has improved the surface roughness and porosity of paper substrate. The addition of nanosilica in polyurethane coating had increased the water resistance ability of the coated paper. It was demonstrated that polyurethane/nanosilica-6% shows better water resistance and exhibits better thermal stability than the nanocomposites with lower nanosilica loading. Fourier transform infrared spectroscopy result shows that there was no chemical reaction between nanosilica and polyurethane. [ABSTRACT FROM AUTHOR]

Here we describe an ultra-low-cost origami-based approach for large-scale manufacturing of microscopes, specifically demonstrating brightfield, darkfield, and fluorescence microscopes. Merging principles of optical design with origami enables high-volume fabrication of microscopes from 2D media. Flexure mechanisms created via folding enable a flat compact design. Structural loops in folded paper provide kinematic constraints as a means for passive self-alignment. This light, rugged instrument can survive harsh field conditions while providing a diversity of imaging capabilities, thus serving wide-ranging applications for cost-effective, portable microscopes in science and education. [ABSTRACT FROM AUTHOR]

The objective of this research is to understand more fully the out-of-plane auxetic behavior of paper. In the reported research, initial characterization of the auxetic properties of common, commercially available papers is described. The results of these experiments suggest that the auxetic response seen in paper structures is related to the cellulose fiber network structure, as previously suggested, and is related to inter-fiber bonding and fiber organization in the sheet. These results also indicate that further study is needed to understand how materials and processing variables influence auxetic behavior. A mathematical model, attempting to explain auxetic response in an idealized arrangement of fibers is included. Ultimately, the fundamental understanding resulting from this research should lead to new product development opportunities for forest product-based paper materials as well as to the establishment of predictive structure-property relations for auxetic materials using paper as a model system. [ABSTRACT FROM AUTHOR]

We report on the use of elemental composition, determined by energy dispersive X-ray fluorescence (EDXRF), to identify different types of paper. The concentrations of S, Cl, K, Ca, Ti, Mn, Fe, Co, Cu, Zn, As, Br, Rb, Sr, Ba and Pb were determined in papers from 1555, 1575, 1724, 1748, 1779, 1782, 1787, 1806, 1861, 1919, 1941 and 2005. A preliminary analysis was made with the use of a dendrogram. The Euclidian distances evidenced a big fluctuation in the elemental composition on most recent papers. The dendrogram also allowed us to catalogue the analysed samples into ten types of paper. Calcium, Cu, Fe, Zn and Sr were the only elements found in all paper samples. However the content of each element was different in every paper type. Calcium is the predominant element in all paper types. Applying Spearman coefficients correlations to these papers for Ca, Cu, Fe, Zn and Sr, we found moderate negative correlations between Ca-Cu. Positive correlations were also found between Fe-Cu, though not very strong. High levels of the toxic elements, Co, Ni, As and Pb were present in papers from 1779 and 1787. From this work it becomes clear that the number of elements in modern papers is lower than in older ones. [ABSTRACT FROM AUTHOR]