Search

It is known that the SREBP1c gene is an important gene responsible for adipogenesis and regulation of the expression of genes controlling fatty acid biosynthesis. Its expression levels increase in parallel with obesity. Therefore, the present study focused on screening the genetic variation within bovine SREBP1c gene and analyzing its effect on growth traits in 1035 individuals belonging to four Chinese cattle breeds (QC, NY, JX, CH) using PCR-SSCP, DNA sequencing, and forced PCR-RFLP methods. The results revealed two novel mutations: NC_007317: g. 10781 C > A (457aa), 10914 G > A (502aa). Association analysis with growth traits in the Nangyang breed indicated that: The SNPs in the bovine SREBP1c gene had significant effects on body weight and average daily gain at birth, 6 and 12 months old (P < 0.05 or P < 0.01). Therefore, these results suggest that the SREBP1c gene is a strong candidate gene that affects growth traits in cattle. [ABSTRACT FROM AUTHOR]

VISFATIN is an adipose cytokine that has been proved to correlate with growth and development traits. In a previous study from our lab, two insertion/deletions (indels; including a 35-bp insertion at its intron 4 and a 6-bp deletion in intron 5) were identified within the VISFATIN gene. To validate these indels and evaluate their association with growth traits in Chinese cattle, a total of 413 samples from four Chinese indigenous breeds and 217 samples from Chinese breeds were detected. Three genotypes (WW, WI and II) at intron 4 were detected based on the 35-bp insertion (allele I) or deletion (allele W) and showed moderate polymorphism in all samples. Two genotypes (WW and WD) at intron 5 were detected based on the 6-bp deletion (allele D) or insertion (allele W) in Xianan (XN) cattle and Jinnan (JN) cattle population but showed poor polymorphisms. Association analysis illustrated that the indel at intron 4 is significantly associated with chest girth, rump length and body weight in Ji'an (JA) cattle and the indel at intron 5 can cause a significant difference in rump length in JN cattle. To our knowledge, it is the first time it has been shown that indels within the VISFATIN gene are associated with growth traits in the two Chinese indigenous cattle breeds. These findings suggest that the VISFATIN gene can be used as a molecular marker for JN and JA cattle breeding. [ABSTRACT FROM AUTHOR]

Copy number variant (CNV), a common genetic polymorphism, is closely related to the phenotypic variation traits of organisms. Vesicle-associated membrane protein 7 gene (VAMP7) codes a protein, which is a member of the SNARE proteins family and plays an important role in the process of intracellular vesicle transport. In this study, a total of four cattle breeds (Yunling cattle, Xianan cattle, Pinan cattle, Jiaxian red cattle) were used to investigate the copy numbers, and we found an association relationship between CNV of VAMP7 gene and growth traits of cattle by SPSS 20.0 software. The results showed that the CNV type of VAMP7 gene in four cattle breeds had the same distribution, Duplication type occupies a dominant position among the four varieties. In Yunling cattle, the Duplication type of VAMP7 is significantly related to the height at the hip cross (p < 0.05), Individuals with Duplication type commonly have less performance on growth and development, which indicates that the Duplication type of the VAMP7 gene may have a negative effect on cattle growth. Individuals with the other two CNV types may become the breeding direction of the VAMP7 gene. This study provided a new perspective and basic material for the molecular genetics of the CNV of the VAMP7 gene, and also promoted the breeding progress of Chinese local cattle. [ABSTRACT FROM AUTHOR]

Copy number variation (CNV) is a type of genomic structural variation, and the research on it has flourished in recent years. According to the high-throughput sequencing data, we found that the copy number variation region of the GAL3ST1 gene was correlated with the growth traits of bovine. It is significant that we study the CNV of GAL3ST1 gene and process the association analysis between results of Q-PCR and growth traits of Chinese cattle. In this research, SPSS software was used to detect the distribution of GAL3ST1 gene copy number in four cattle breeds and the correlation of growth traits was analyzed. Correlation analysis showed that GAL3ST1 CNV had positive effects on some growth traits of bovine (p < 0.05). In addition, the study detects the expression of GAL3ST1 gene in different tissues of Xia'nan cattles on mRNA level. The result showed that GAL3ST1 gene has different expression conditions in different tissues, results showed that the expression level was high in intestine and low in liver tissue. In a word, we speculated that the GAL3ST1 gene can be used as a molecular marker and this study confirmed that the CNV of it can provide theoretical basis for molecular breeding of cattle in China. [ABSTRACT FROM AUTHOR]

• The CNV region was identified in Qinchuan cattle, Xiannan cattle, Yunling cattle, Ji'an cattle, Jiaxian Red cattle, Qaidam cattle, and Guyuan yellow cattle of STAT5A gene. • The STAT5A gene has important influence on the growth traits of JX, GY, QD and QC cattle. • Distribution of the Copy Number Variation in seven different Cattle Breeds. CNVs, which are a type of structural variation, make a substantial impact on diverse characteristics in multiple species. Q-PCR and data association analysis were used for STAT5A gene copy in this study. This study aimed to investigate the copy number variation (CNV) of the STAT5A gene in seven Chinese cattle breeds, namely Qinchuan cattle, Xianan cattle, Yunling cattle, Ji'an cattle, Jiaxian Red cattle, Qaidam cattle, and Guyuan yellow cattle. Blood samples were collected for CNV typing, and the correlation between CNV type and growth traits was analyzed using SPSS 23.0 software and ANOVA. The findings revealed variations in the distribution of different copy number types among the different cattle breeds. Furthermore, association analysis demonstrated a positive impact of CNV in the STAT5A gene on cattle growth: in the JX, individuals with duplication types exhibited superior performance in terms of rump length (P < 0.05). Conversely, normal GY cattle demonstrated better body height and abdomen circumference (P < 0.05), while QD cattle exhibited a significant correlation between weight and body length with normal individuals (P < 0.05). Moreover, QC bovine duplication individuals outperformed other types, with copy number variation significantly associated with chest depth, chest width, and body length (P < 0.05). The results validate the correlation between copy number variation (CNV) of the STAT5A gene and growth characteristics in five different cattle breeds, providing a reliable benchmark for the purpose of cattle breeding. [ABSTRACT FROM AUTHOR]

Copy number variation (CNV) has been used as an important source of phenotypic and genetic diversity in recent years. Nicastrin (NCSTN) gene is usually attached to human diseases such as Alzheimer's disease, and Acne inversa. However, there are no essays about the NCSTN gene combining with cattle breeds. In our study, we discovered different distributions of NCSTN gene copy number and associated it with phenotypic traits in four Chinese yellow cattle breeds (XN, PN, QC and YL). The result turned out that the CNV of the NCSTN gene was associated with several growth traits, such as cannon circumference, chest girth and rump length (p < 0.05). In general, we revealed the eminence over CNV of NCSTN gene and economic traits, suggesting that the CNV of the NCSTN gene can be considered to be a promising molecular breeding marker of Chinese beef cattle. [ABSTRACT FROM AUTHOR]

Copy number variation, as a kind of genetic submicroscopic structural variation, refers to the deletion or repetition of a large segment of genomic DNA, involving a segment size ranging from 50 bp to several MB. Mitochondrial fusion protein (MFN1) gene regulates the fusion of mitochondrial outer membrane in cells and maintains the dynamic needs of reticular mitochondria in cells. In this study, we conducted to tested the dstribution characteristics of MFN1 -CNV in 522 cattles across Xianan cattle (XN), Pinan cattle (PN), Qinchuan cattle (QC), Jiaxian cattle (JX), Yunling cattle (YL), and correlated it with phenotypic traits. Then we observed the expression of MFN1 in various tissues of QC cattle (n = 3), and the expression levels were higher in lung and muscle. The results showed that there was significant correlation between MFN1 gene CNV and hucklebone width of QC cattle, hip width and height at sacrum of JX red cattle, chest width and rump length of YL cattle (P < 0.05). Individuals with duplication type were better than the type of normal or deletion in phenotypic traits. In conclusion, our data showed the correlation between MFN1 gene and growth traits of Chinese cattle. MFN1 gene can be used as a molecular marker for cattle selection and breeding, and accelerate the improvement of Chinese cattle. [ABSTRACT FROM AUTHOR]

• The site of SNP was identified in Chinese yellow cattle of MOGAT1 gene. • The MOGAT1 gene has an important influence on the growth traits of Chinese cattle. • The SNP of MOGAT1 gene had significant effect on body weight of QC cattle and XN cattle, and Chest depth of YL cattle. Single nucleotide polymorphism (SNP) has recently become one of the ideal genetic markers. SNP refers to the DNA sequence polymorphism caused by double nucleotide variation in the genome, including the conversion or transversion of segmented bases. The synthesis and metabolism of triglycerides are related to the changes of energy in the body of livestock, which in turn affects their growth and development. Studies have shown that MOGAT1 gene plays a role in the route of triglyceride synthesis. PCR-RFLP and agarose gel electrophoresis technology were used to type the SNP site of MOGAT1 gene at g.25940T > C in this study. Association analysis between typing results and growth trait data was detected by SPSS 20.0 software. Results show that MOGAT1 gene was in a low level of heterozygosity in Xianan, Qinchuan and Pinan cattle population (0 < PIC < 0.25), and in middle level of heterozygosity in YL cattle population(0.25 < PIC < 0.5). And genotype 'AA' was dominant gene in Chinese cattle population. In QC and XN cattle, genotype of GG possess advantage on Body weight (P < 0.05); in YL cattle, individuals with genotype of homozygous mutation decreased significantly on Chest depth (P < 0.05). The purpose of this research is to provide theoretical materials for molecular breeding of yellow cattle and to promote the process of improving the growth traits of Chinese local yellow cattle. [ABSTRACT FROM AUTHOR]

Simple Summary: Our study identified the copy number variations (CNVs) and transcriptional expressions of guanylate-binding protein 6 (GBP6) in Chinese cattle, as well as analyzed the association of CNVs and expressions with the growth traits of Chinese cattle. The results showed Xianan cattle with gain types (Log22−ΔΔCt > 0.5) of CNVs of GBP6 had highest relative gene expression levels in the muscle tissues and displayed superior phenotypic values of body weight, cannon circumference and chest circumference. Our study suggested that CNV gain types of GBP6 could be used as the candidate markers in the cattle-breeding program for growth traits. Association studies have indicated profound effects of copy number variations (CNVs) on various phenotypes in different species. In this study, we identified the CNV distributions and expression levels of guanylate-binding protein 6 (GBP6) associated with the growth traits of Chinese cattle. The results showed that the phenotypic values of body size and weight of Xianan (XN) cattle were higher than those of Nanyang (NY) cattle. The medium CNV types were mostly identified in the XN and NY breeds, but their CNV distributions were significantly different (adjusted p < 0.05). The association analysis revealed that the body weight, cannon circumference and chest circumference of XN cattle had significantly different values in different CNV types (p < 0.05), with CNV gain types (Log22−ΔΔCt > 0.5) displaying superior phenotypic values. We also found that transcription levels varied in different tissues (p < 0.001) and the CNV gain types showed the highest relative gene expression levels in the muscle tissue, consistent with the highest phenotypic values of body weight and cannon circumference among the three CNV types. Consequently, our results suggested that CNV gain types of GBP6 could be used as the candidate markers in the cattle-breeding program for growth traits. [ABSTRACT FROM AUTHOR]

Simple Summary: Copy number variation is a common genetic polymorphism, mainly represented by submicroscopic levels of deletion and duplication, caused by rearrangement of the genome. It is well-known that the copy number variation of a gene is associated with growth traits of livestock. In this study, we detected the correlation between the copy number variation of the the MLLT10 gene and the growth traits of Chinese yellow cattle. We found that the copy number variation of the MLLT10 gene has a significant influence on hip width, rump length, hucklebone width, and cannon bone circumference of some Chinese yellow cattle breeds. The results provide preliminary suggestions for Chinese yellow cattle breeding and new insights about the future of copy number variation (CNV) as a new promising molecular marker in animal breeding. Copy number variation is a part of genomic structural variation and has caused widespread concern. According to the results of high-throughput screening of the MLLT10 gene, we found that the copy number variation region of the MLLT10 gene was correlated with bovine growth traits. We aimed to detect the MLLT10 gene copy number variation and provide materials for the Chinese yellow cattle breed. In this study, the SPSS software was used to analyze the correlation among the copy number type of six different cattle breeds (i.e., Qinchuan, Xianan, Jiaxian, Yanbian, Sinan, Yunling) and the corresponding growth traits. The results showed the following: In Qinchuan cattle, the copy number duplication type was greater than the deletion and normal types; in Xianan cattle, the copy number duplication and normal types were less as compared with the deletion type; and in Yunling cattle, the frequency of the duplication type was dominant among the three types of copy number variants. The correlation analysis result showed that there is a significant correlation between the copy number variation (CNV) of the MLLT10 gene and the growth traits of three cattle breeds. Furthermore, correlation analysis showed that MLLT10 CNV had positive effects on growth traits such as hip width, rump length, hucklebone width, and cannon bone circumference (p < 0.05). This study provides a basis for the molecular-assisted marker breeding of cattle and contributes to the breeding of cattle. [ABSTRACT FROM AUTHOR]