Search

This research aimed to demonstrate the thermal pathway (torrefaction technology) to convert organic waste to be biochar/biocoal. Organic waste (cabbage) from Nonthaburi fresh market, Thailand was used as raw material. Torrefaction technology was processed in horizontal cylindrical batch reactor with Nitrogen gas purging during doing experiment. Temperature profile was preliminary checked to find out lag time. Amount of loaded weight and particle size of material were preliminary tested. Experimental conditions such as time and temperature were tested at 30 and 60 minutes, and range temperature of 220 to 300°C. Important property of product; calorific value of product in form of high heating value (HHV) and mass yield percentage were measured. The optimal conditions were evaluated with two parameters; increase of HHV compared to reference condition and % mass yield. Increase temperature was significant effect to increase HHV value of biochar. The optimal time and temperature for getting the highest heating value were 60 minutes and 280°C. [ABSTRACT FROM AUTHOR]

The global demand for biochar in agricultural and carbon sequestration applications is increasing; nevertheless, biochar production using the 50-liter household biomass gasifier stove (50L-HBGS) in Thailand found major issues that need to be improved. The objective of this study was to study the effects of the airflow in the non-uniform combustion core shape (NCCS) on the biochar production characteristic of the 50L-HBGS. The new design of the NCCS was constructed and studied to replace the existing combustion core shape (ECCS) at Mahasarakham University. The height, air inlet, and air outlet diameters of the NCCS were designed at 45, 24, and 11.4 cm, respectively. The NCCS with 21 holes of the pyrolysis gas outlet, a diameter of 4 mm for each, was integrated into the 50L-HBGS and performed comparative tests to the ECCS using 9 kg of bamboo wood chunks in three consecutive experiments. The airflow and the combustion behavior were studied through the stove temperature profiles, which were recorded every 5 minutes using a digital data logger. The biochar products were studied using the scanning electron microscope (SEM) with the energy dispersive x-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), and the proximate analysis technique. The study indicated that the 50L-HBGS with the NCCS made significantly improved the airflow rates in the combustion core, resulting in better continuous burning during the ignition state than with the ECCS. Moreover, the pyrolysis temperatures were significantly improved, it was provided temperatures during the pyrolysis process reached higher than 500 °C, resulting in the liquid tar being removed and no unburned wood chunks remaining at the end. The characterization result demonstrated that the 50L-HBGS with the NCCS had created biochar within a range of micropore and macrospore sizes and high fixed carbon content, which could be advantageously used for different agricultural and carbon sequestration applications. [ABSTRACT FROM AUTHOR]

The highly acid sulfate Rangsit soil series of Rangsit, Pathum-Thani district, Thailand poses a major problem for agriculture in the area. Water hyacinth is a naturally occurring weed that can grow aggressively, causing eutrophication and leading to many severe environmental impacts. Here, through the pyrolysis process, we convert water hyacinth to biochar and use it for acid soil amendment. We found the ratio between biochar, soil, and sand suitable for the cultivation of water convolvulus to be 50 g of biochar, 400 g of soil, and 100 g of sand (1:8:2). This soil mixture improved the pH of the soil from 4.73 to 7.57. The plant height of the water convolvulus grown in the soil mixture was the greatest at 20.45 cm and the plant weight with and without roots was greatest at 2.23 g and 2.52 g, respectively. Moreover, we demonstrated the dominance and high abundance of Bacillus among the community in soil with biochar amendment. Here we provide the first assessment of the appropriate amount of water hyacinth-derived biochar for mitigation of soil acidity and promotion of optimal water convolvulus growth. Moreover, biochar can optimally modify soil bacterial communities that benefit plant development. [ABSTRACT FROM AUTHOR]

The mitigation of greenhouse gas (GHG) emissions and water usage optimization in rice cultivation is challenging for many agricultural countries, including Thailand, who have set goals of reaching net zero emissions and coping with droughts caused by climate change. Alternate wetting and drying (AWD) and biochar application are possible practices for achieving cleaner rice production through reduction of GHG emissions and water consumption. However, these methods' potential varies by site, especially in areas with limited control of water levels. This study assessed the effects of AWD at different drying levels (10, 15, and 20 cm below the soil surface) and rice straw biochar on GHG emissions, yield production, water use, soil characteristics, and economic aspects. This study was conducted over two rice cultivation seasons: a major season in 2022 and a second season in 2023 at a field in Kalasin Province, northeastern Thailand. Using AWD and biochar reduced annual GHG emissions by 48.2% and 8.01%, respectively. Deeper drying levels of AWD showed greater mitigation potential than shallow levels. The combination of AWD and biochar had additional potential for GHG mitigation, however, this impact did not show statistical change as compared to their separate potentials. The adoption of AWD and biochar could also maintain the amount of rice yield compared to traditional practice. All levels of AWD saved irrigation water consumption by an average of 16.8% per season; the highest potential was observed in AWD at 10 cm below the soil surface. Biochar improved soil health after two seasons by enhancing soil pH and organic carbon sequestration. The combination of AWD and biochar did not additionally augment the capacity in water saving of AWD or soil improvement of biochar. The AWD water regime also did not increase net profits, while biochar decreased net profits due to the required investment in biochar production. Using AWD is a feasible way to mitigate GHG emissions and save water without affecting rice productivity and net profits in northeastern Thailand. [Display omitted] • Alternate wetting and drying (AWD) mitigated greenhouse gas emissions by 48.2%. • AWD reduced irrigation water use by an average of 16.8%. • AWD at 15 cm of drying level without biochar is suggested as a mitigation tool. • Rice straw biochar showed the significant impact on soil organic carbon stock. [ABSTRACT FROM AUTHOR]

For an agricultural country such as Thailand, converting agricultural waste into biochar offers a potential solution to manage massive quantities of crop residues following harvest. This research studied the structure and chemical composition of biochar obtained from cassava rhizomes, cassava stems and corncobs, produced using a patented locally-manufactured biochar kiln using low-cost appropriate technology designed to be fabricated locally by farmers. The research found that cassava stems yielded the highest number of Brunauer-Emmett-Teller (BET) surface area in the biochar product, while chemical analysis indicated that corncobs yielded the highest amount of C (81.35%). The amount of H in the corncob biochar was also the highest (2.42%). The study also showed biochar produced by slow pyrolysis was of a high quality, with stable C and low H/C ratio. Biochar's high BET surface area and total pore volume makes it suitable for soil amendment, contributing to reduced soil density, higher soil moisture and aeration and reduced leaching of plant nutrients from the rhizosphere. Biochar also provides a conducive habitat for beneficial soil microorganisms. The findings indicate that soil incorporation of biochar produced from agricultural crop residues can enhance food security and mitigate the contribution of the agricultural sector to climate change impacts. [ABSTRACT FROM AUTHOR]

A heavy metal contamination problem in Thailand is an important issue that needs to be addressed urgently, particularly contaminated in water. Heavy metal contamination in water can spread to other environments faster. This research aims to apply chitosan-magnetic biochar synthesized from water hyacinth in order to solve the problem of copper and nickel contaminated in water. Data from SEM indicated that chitosan-magnetic biochar had a smoother surface and had smaller holes than the magnetic biochar. When tested with Autosorb-1, results indicated that the adsorbent with chitosan had a slightly lower porosity compared to without chitosan. Data from FTIR found evidence of chitosan on the adsorbent. According to the XRD study, peaks of iron oxide presented. The point of zero charges (pHPZC) of chitosan-magnetic biochar was 7.03. The adsorption isotherms, kinetics, and thermodynamics were observed. The adsorption of both Cu and Ni followed Langmuir isotherm. The value of qmax for Cu was 38.4615 mg/g and for Ni was 0.4858 mg/g. The R² value of Dubinin-Radushkevich isotherm was also high. The E value of Cu and Ni was 0.316 kJ/mol and 1.8962 kJ/mol, respectively. The best-fitting kinetic model for Cu was the pseudo-second-order model and for Ni was the intra-particle diffusion. The adsorption was an endothermic process. The process was spontaneous at high temperatures and non-spontaneous at low temperatures. [ABSTRACT FROM AUTHOR]

Durian peel is a type of biomass derived from agricultural residues, which are found in abundant in Thailand. This study aims to investigate the thermal and chemical properties of three indigenous durian peels, namely Monthong (MDP), Puangmanee (PDP), and Bacho (BDP), as well as the characteristics of biochar and pyrolysis liquid derived from slow pyrolysis of the durian peel. MDP had the greatest volatile matter and fixed carbon content, with 73.97 and 18.43 wt%, respectively. MDP was applied for further research in order to produce biochar and pyrolysis liquid at pyrolysis temperatures of 400 and 600 °C. The maximum biochar yield was 36.01% at 400 °C, while the maximum pyrolysis liquid yield was 37.25% at 600 °C. The largest high heating value of biochar (24.48 MJ kg−1) was obtained at 600 °C more than the high heating value of feedstock (14.32 MJ kg−1). Biochar obtained at 400 °C can be categorized as fertilizer class 4, while biochar obtained at 600 °C can be classified as carbon storage class 2 using the IBI biochar classification tool. The quality of the pyrolysis liquid was determined to be of 3.14 pH and 1.052 g mL−1 specific gravity at a pyrolysis temperature of 600 °C, which meets Thailand standards. As a result, both 400 °C and 600 °C pyrolysis liquids produced significant chemicals that are employed in a variety of industries. Consequently, this research is strongly recommended to be expanded to produce high-quality durian peel biochar and pyrolysis liquid. [Display omitted] • Comprehensive physical, chemical, thermal properties of durian peels were explored. • Durian peel biochar can be categorized by the IBI as carbon storage class 2. • The biochar can be classified by the IBI as a high fertilizer class 4. • Pyrolysis liquid derived from the durian peel meet Thailand standards. • 81 main compounds with essential chemicals were detected in the pyrolysis liquids. [ABSTRACT FROM AUTHOR]

The in-field burning of sugarcane leaf residues presents a major environmental and health burden in Thailand. In this study, sugarcane leaves were converted into a biochar-based slow release phosphorus (P) fertilizer via pyrolysis at 600 °C, and the influence of pre- and post-pyrolysis treatment on the P loading and release was investigated. The sugarcane leaves were pre-treated with an alkaline (diammonium phosphate, DAP) or an acidic P source (phosphoric acid, PA), with or without addition of MgO. Additionally, the biochar was post-treated with DAP to increase the P loading. Extraction of P in DI water and 2% formic acid were used as indicators for potential slow release. The microporous biochars had a specific surface area of 69–333 m2 g−1 and pre-treatment resulted in a P content of 34–82 g kg−1. When MgO was included in the pre-treatment, XRD analysis confirmed formation of crystalline Mg 2 P 2 O 7 , irrespective of the P source. This Mg 2 P 2 O 7 was responsible for slow P release in DI water over 240 h via a dissolution-controlled process. Post-treatment with DAP increased the P loading to 156 g kg−1 in the form of water-soluble monoammonium phosphate (MAP), which did not contribute to slow release. The tunable P release via combinations of pre- and post-pyrolysis treatment makes these engineered biochars attractive as P sources for crops and presents an attractive solution to mitigate in-field sugarcane residue burning. [Display omitted] • P-loaded biochar was prepared by co-pyrolysis of sugarcane leaves with P + MgO. • Addition of MgO in pre-pyrolysis treatment results in slow release of P. • The slow P release is controlled by dissolution of Mg 2 P 2 O 7. • Post-treatment with DAP increases water-soluble P but not slow-release P. [ABSTRACT FROM AUTHOR]

Drinking water treatment residuals (DWTRs) generated during drinking water treatment have been proposed for use in lake restoration as a solid-phase sorbent to inactivate phosphorus (P) in lake sediment. However, treatments that minimize leaching of nitrogen (N) and optimize P sorption capacity may be necessary prior to use. This study assessed seven different treatment methods, including washing and heat treatments at different temperatures and with and without oxygen limitation, among two DWTRs from Thailand. Results showed that oxygen-limited heat treatment at 600 °C substantially reduced N leaching (<0.2 mg/kg TKN) while also improving P sorption capacity (increase of 18–32% compared to untreated DWTR) to a maximum of 45.7 mg P/kg. Washing with deionized water reduced N leaching if a sufficient volume was used but did not improve P sorption. Heating at 200 °C with or without the presence of oxygen did not improve N leaching or P sorption. Regression of P sorption parameters from a two-surface Langmuir isotherm against physio-chemical properties indicated that oxalate-extractable (i.e., amorphous) aluminum and iron were significantly associated with total P sorption capacity (R2 = 0.94), but micropores and oxalate-extractable P modulated the P sorption from high-affinity to low-affinity mechanisms. In conclusion, this study confirmed the importance of amorphous aluminum in DWTRs for inactivating P, and the results suggest that high-temperature treatment under oxygen-limited conditions may be the most reliable way to optimize DWTRs for environmental remediation applications. [ABSTRACT FROM AUTHOR]

Organic amendments may improve the quality of acidic tropical agricultural soils with low organic carbon contents under conventional management (mineral fertilization and irrigation) in Southeast Asia. We investigated the effect of biochar, compost and their combination on maize growth and yield, soil physical, biological and chemical properties at harvesting time at four sites in three countries: Thailand, Vietnam and Laos. Treatments consisted of 10 t·ha−1 cow manure compost and 7 t·ha−1 of Bamboo biochar and their combination. Maize biomass production and cop yields were recorded for two seasons. Elemental content, pH and nutrient availability of soils were analyzed after the first growing season. We also characterized macrofauna abundance and water infiltration. Few changes were noted for maize biomass production and maize cop yield. Soil chemical parameters showed contrasting, site-specific results. Compost and biochar amendments increased soil organic carbon, pH, total K and N, P and K availability especially for sandy soils in Thailand. The combination of both amendments could reduce nutrient availability as compared to compost only treatments. Physical and biological parameters showed no treatment response. We conclude that the addition of compost, biochar and their mixture to tropical soils have site-specific short-term effects on chemical soil parameters. Their short-term effect on plants is thus mainly related to nutrient input. The site-dependent results despite similar crops, fertilization and irrigation practices suggest that inherent soil parameters and optimization of organic amendment application to specific pedoclimatic conditions need future attention. [ABSTRACT FROM AUTHOR]

An improved understanding of the historical variation in the emissions and sources (biomass burning, BB vs. fossil fuel, FF combustion) of soot and char, the two components of black carbon (BC), and polycyclic aromatic compounds (PACs) may help in assessing the environmental effects of the Atmospheric Brown Cloud (ABC) in SE Asia. We therefore determined historical variations of the fluxes of soot, char, and PACs (24 polycyclic aromatic hydrocarbons (PAHs), 12 oxygenated PAHs (OPAHs), and 4 azaarenes) in a dated sediment core (covering the past ∼150 years) of Phayao Lake in Thailand. The soot fluxes have been increasing in recent times, but at a far lower rate than previously estimated based on BC emission inventories. This may be associated with a decreasing BB contribution as indicated by the decreasing char fluxes from old to young sediments. The fluxes of high- and low-molecular-weight (HMW and LMW) PAHs, OPAHs, and azaarenes all sharply increased after ∼1980, while the ΣLMW-/ΣHMW-PAHs ratios decreased, further supporting the reduction in BB contribution at the expense of increasing FF combustion emissions. We also suggest that the separate record of char and soot, which has up to now not been done in aerosol studies, is useful to assess the environmental effects of ABC because of the different light-absorbing properties of these two BC components. Our results suggest that besides the establishment of improved FF combustion technology, BB must be further reduced in the SE Asian region in order to weaken the ABC haze. Image 1 • Deposition of black carbon, soot and PACs to a Thai sediment core sharply increased since ∼1980. • Variations in char and soot deposition in Thailand over the past 150 years were decoupled. • Decreasing biomass burning offset the recent increase in other soot emissions to the atmosphere. [ABSTRACT FROM AUTHOR]