Search

The activation capacity of molecular oxygen is an important indicator to evaluate the photocatalytic efficiency of photocatalysts. In this paper, WS2 nanosheet was deposited on hyper-crosslinked CTF-1-G (obtained by molecular expansion from covalent triazine framework CTF-1) to form a C-GW heterojunction, which promoted the photodegradation of pollutants and the activation of molecular oxygen. This novel C-GW heterojunction exhibited excellent degradation property for organic pollutants (tetracycline (TC), rhodamine B (RhB)) and activating molecular oxygen under visible light irradiation. Among them, C-GW15 could degrade 98% of 20 ppm TC in 60 min and 99% of 30 ppm RhB in 30 min, and it had the highest hydrogen generation rate and hydrogen production amount in 4 hours, which were 8.74 mmol h−1 g−1 and 34.94 mmol g−1, respectively. Meanwhile, C-GW15 had the strongest 3,3′,5,5′-tetramethylbenzidine oxidation capacity and could generate 1.83 μmol of ˙O2− in 60 min and the production of H2O2 was 20.8 μmol L−1 in 40 min. The results of this study clearly indicated that the combination of WS2 and CTF-1-G can enhance the visible light absorption capacity and photogenerated carrier separation efficiency, thus promoting the photocatalytic performance. Finally, a Z-type photocatalytic mechanism was proposed based on radical capture, molecular oxygen activation experiments and electron spin resonance analysis. These findings will extend the fundamental understanding of the Z-type photocatalytic mechanism and provide new opportunities for the rational design of CTF heterojunctions for the treatment of environmental pollution and clean energy conversion. [ABSTRACT FROM AUTHOR]

Photocatalytic splitting of water for hydrogen generation is a green and renewable solution for converting solar energy to chemical energy; thus, the development of high-performance and stable photocatalytic materials has emerged as a research hotspot recently. Herein, a heterostructure composite photocatalyst of octahedral CoO uniformly modified with novel nitrogen-doped MXene quantum dots (N-MQDs) is successfully designed using a typical solvothermal approach. The optimum photocatalytic hydrogen evolution efficiency of the prepared N-MQDs@CoO heterojunction composite is 82.54 μmol g−1 h−1 with visible light, which is 16.57 times higher compared to the pure CoO. A series of photoelectrochemical tests were further performed to elucidate the photocatalytic hydrogen evolution mechanism. The remarkable improvement of activity is primarily attributed to the synergistic interaction between the closely spaced interface contacts and energy level matching among high conductivity Ti3C2 MXene quantum dots with CoO octahedra, dramatically hastening the segregation and transfer of photo-generated carriers. This study provides new ideas for the construction of MXene quantum dot-based co-photocatalysts with highly efficient photocatalytic performance and stability toward solar energy conversion applications. [ABSTRACT FROM AUTHOR]

The rapid recombination of photogenerated carriers and strong photocorrosion have considerably limited the practical application of CdS in the field of photocatalysis. Loading a cocatalyst has been widely utilized to largely enhance photocatalytic activity. In the present work, a WC@C cocatalyst was prepared by a novel molten salt method and explored as an efficient noble-metal-free cocatalyst to significantly enhance the photocatalytic hydrogen evolution rate of CdS nanorods. The WC@C/CdS composite photocatalyst with a 7 wt% content of WC@C showed the highest photocatalytic hydrogen evolution rate of 8.84 mmol g−1 h−1, which was about 21 and 31 times higher than those of CdS and 7 wt% Pt/CdS under visible light irradiation. A high apparent quantum efficiency (AQY) of 55.28% could be achieved under 420 nm monochromatic light. Furthermore, the photocatalytic activity of the 7 wt% WC@C/CdS photocatalyst exhibited good stability for 12 consecutive cycles of the photocatalytic experiment with a total reaction time of 42 h. The excellent photocatalytic performance of the photocatalyst was attributed to the formation of a Schottky junction and the loading cocatalyst, which not only accelerated the separation of the photogenerated carrier but also provided a reactive site for hydrogen evolution. This work revealed that WC@C could act as an excellent cocatalyst for enhancing the photocatalytic activity of CdS nanorods. [ABSTRACT FROM AUTHOR]

The study of environmentally friendly semiconductor photocatalysts has important practical significance for efficient photocatalytic hydrogen evolution. In this experiment, type II heterojunction NiCo-LDH/CeO2 was prepared by in situ loading, and the NiCo-LDH/CeO2 catalyst showed good activity under simulated sunlight irradiation. Under simulated visible light irradiation, its hydrogen production rate reached 2.7 mmol h−1 g−1, which was higher than that of NiCo-LDH (0.86 mmol h−1 g−1). Through a series of characterization data, it can be concluded that the heterojunction successfully constructed by the close contact between NiCo-LDH and CeO2 accelerates the separation of photogenerated electrons and holes and can effectively inhibit the recombination of the two so that more electrons are involved in the hydrogen evolution reaction. The material has good interfacial charge transfer performance, which improves the photocatalytic performance. This work can provide an effective method for the research and development of NiCo-LDH. [ABSTRACT FROM AUTHOR]

Improving the efficiency of charge separation is an important aspect in photocatalysis. In this work, the hybrid nanostructure of α-Ni(OH)2/Zn0.5Cd0.5S has been prepared by a simple two-step method for the first time. Here, designed/constructed with α-Ni(OH)2 over Zn–Cd–S, the catalyst efficiently boosts hydrogen evolution in photocatalytic hydrogen production. With a 25% content of α-Ni(OH)2 in the ZSN25 composite under visible light (λ≥ 420 nm) irradiation, remarkable hydrogen production of 22.45 mmol g−1 h−1 has been achieved. In addition, we found that the activities could be improved by means of controlling the formation of α-Ni(OH)2 species. The reason is that the interface between α-Ni(OH)2 and Zn0.5Cd0.5S provides a fast charge transfer channel to reduce the recombination of photogenerated carrier. Also, the formation of this interface is largely related to the content of α-Ni(OH)2. The Tafel slope, EIS and PL spectra support enhanced photocatalytic energy in the α-Ni(OH)2/Zn0.5Cd0.5S charge transfer state and faster hydrogen evolution kinetics. These nanocomposites of Zn0.5Cd0.5S modified by α-Ni(OH)2 are of great significance for renewable hydrogen generation technology. [ABSTRACT FROM AUTHOR]