Search

Abstract Protein filaments are ubiquitous in nature and have diverse biological functions. Cryo-electron microscopy (cryo-EM) enables the determination of atomic structures, even from native samples, and is capable of identifying previously unknown filament species through high-resolution cryo-EM maps. In this study, we determine the structure of an unreported filament species from a cryo-EM dataset collected from Bacillus amyloiquefaciens biofilms. These filaments are composed of GerQ, a spore coat protein known to be involved in Bacillus spore germination. GerQ assembles into a structurally stable architecture consisting of rings containing nine subunits, which stacks to form filaments. Molecular dockings and model predictions suggest that this nine-subunit structure is suitable for binding CwlJ, a protein recruited by GerQ and essential for Ca2+-DPA induced spore germination. While the assembly state of GerQ within the spores and the direct interaction between GerQ and CwlJ have yet to be validated through further experiments, our findings provide valuable insights into the self-assembly of GerQ and enhance our understanding of its role in spore germination.

Abstract Type IV pili (T4P) represent one of the most common varieties of surface appendages in archaea. These filaments, assembled from small pilin proteins, can be many microns long and serve diverse functions, including adhesion, biofilm formation, motility, and intercellular communication. Here, we determine atomic structures of two distinct adhesive T4P from Saccharolobus islandicus via cryo-electron microscopy (cryo-EM). Unexpectedly, both pili were assembled from the same pilin polypeptide but under different growth conditions. One filament, denoted mono-pilus, conforms to canonical archaeal T4P structures where all subunits are equivalent, whereas in the other filament, the tri-pilus, the same polypeptide exists in three different conformations. The three conformations in the tri-pilus are very different from the single conformation found in the mono-pilus, and involve different orientations of the outer immunoglobulin-like domains, mediated by a very flexible linker. Remarkably, the outer domains rotate nearly 180° between the mono- and tri-pilus conformations. Both forms of pili require the same ATPase and TadC-like membrane pore for assembly, indicating that the same secretion system can produce structurally very different filaments. Our results show that the structures of archaeal T4P appear to be less constrained and rigid than those of the homologous archaeal flagellar filaments that serve as helical propellers.

Abstract A contractile sheath and rigid tube assembly is a widespread apparatus used by bacteriophages, tailocins, and the bacterial type VI secretion system to penetrate cell membranes. In this mechanism, contraction of an external sheath powers the motion of an inner tube through the membrane. The structure, energetics, and mechanism of the machinery imply rigidity and straightness. The contractile tail of Agrobacterium tumefaciens bacteriophage Milano is flexible and bent to varying degrees, which sets it apart from other contractile tail-like systems. Here, we report structures of the Milano tail including the sheath-tube complex, baseplate, and putative receptor-binding proteins. The flexible-to-rigid transformation of the Milano tail upon contraction can be explained by unique electrostatic properties of the tail tube and sheath. All components of the Milano tail, including sheath subunits, are crosslinked by disulfides, some of which must be reduced for contraction to occur. The putative receptor-binding complex of Milano contains a tailspike, a tail fiber, and at least two small proteins that form a garland around the distal ends of the tailspikes and tail fibers. Despite being flagellotropic, Milano lacks thread-like tail filaments that can wrap around the flagellum, and is thus likely to employ a different binding mechanism.

Abstract Large gaps exist in our understanding of how bacteriophages, the most abundant biological entities on Earth, assemble and function. The structure of the “neck” region, where the DNA-filled capsid is connected to the host-recognizing tail remains poorly understood. We describe cryo-EM structures of the neck, the neck-capsid and neck-tail junctions, and capsid of the Agrobacterium phage Milano. The Milano neck 1 protein connects the 12-fold symmetrical neck to a 5-fold vertex of the icosahedral capsid. Comparison of Milano neck 1 homologs leads to four proposed classes, likely evolved from the simplest one in siphophages to more complex ones in myo- and podophages. Milano neck is surrounded by the atypical collar, which covalently crosslinks the tail sheath to neck 1. The Milano capsid is decorated with three types of proteins, a minor capsid protein (mCP) and two linking proteins crosslinking the mCP to the major capsid protein. The extensive network of disulfide bonds within and between neck, collar, capsid and tail provides an exceptional structural stability to Milano.

ABSTRACTBacterial conjugation, a process of horizontal gene transfer, plays a key role in promoting the spread of antimicrobial resistance among human pathogens. The mechanism of conjugation involves the development of a conjugative pilus that forms a physical bridge between two bacterial cells and the subsequent unidirectional transfer of single-stranded DNA (ssDNA) complexed with a protein from the donor to the recipient cell. Atomic structures exist for many of the components of the type IV secretion system (T4SS), responsible for the nucleoprotein secretion, but little is known about the events preceding gene transfer, specifically what is the extent of the participation of the conjugative pilus in ssDNA transfer? There has been a longstanding debate about whether its main role is to bring a donor and a recipient cell into physical juxtaposition and form a mating junction that allows for ssDNA transfer via the T4SS machinery complex or whether ssDNA is actually transferred through the lumen of the pilus. Here, through a combination of maleimide labeling of the conjugative pilus and SeqA-YFP labeling of the transferred ssDNA, we visualize the process of bacterial conjugation in real time. We discover that the conjugative pilus is capable of transferring the ssDNA at a distance, between physically separated cells, and thus conclude that a physical mating junction is not essential for conjugative gene transfer.IMPORTANCEBacteria are constantly exchanging DNA, which constitutes horizontal gene transfer. While some of these occurs by a non-specific process called natural transformation, some occurs by a specific mating between a donor and a recipient cell. In specific conjugation, the mating pilus is extended from the donor cell to make contact with the recipient cell, but whether DNA is actually transferred through this pilus or by another mechanism involving the type IV secretion system complex without the pilus has been an open question. Using Escherichia coli, we show that DNA can be transferred through this pilus between a donor and a recipient cell that has not established a tight mating junction, providing a new picture for the role of this pilus.

Bacteria can exchange DNA through extracellular appendages (‘mating pili’) in a process known as conjugation. Here, Beltran et al. determine atomic structures by cryo-electron microscopy of a bacterial conjugative pilus and two archaeal pili, showing that the archaeal pili are homologous to bacterial mating pili.

In its simplest form, bacterial flagellar filaments are composed of flagellin proteins with just two helical inner domains, which together comprise the filament core. Although this minimal filament is sufficient to provide motility in many flagellated bacteria, most bacteria produce flagella composed of flagellin proteins with one or more outer domains arranged in a variety of supramolecular architectures radiating from the inner core. Flagellin outer domains are known to be involved in adhesion, proteolysis and immune evasion but have not been thought to be required for motility. Here we show that in the Pseudomonas aeruginosa PAO1 strain, a bacterium that forms a ridged filament with a dimerization of its flagellin outer domains, motility is categorically dependent on these flagellin outer domains. Moreover, a comprehensive network of intermolecular interactions connecting the inner domains to the outer domains, the outer domains to one another, and the outer domains back to the inner domain filament core, is required for motility. This inter-domain connectivity confers PAO1 flagella with increased stability, essential for its motility in viscous environments. Additionally, we find that such ridged flagellar filaments are not unique to Pseudomonas but are, instead, present throughout diverse bacterial phyla.

It has been suggested that the outer domains of bacterial flagellins are not needed for motility. Here, the authors show that flagellar filament outer domains from some bacteria have unique structures which can alter the motility of the bacteria.

While early genetic and low-resolution structural observations suggested that extracellular conductive filaments on metal-reducing organisms such as Geobacter were composed of type IV pili, it has now been established that bacterial c-type cytochromes can polymerize to form extracellular filaments capable of long-range electron transport. Atomic structures exist for two such cytochrome filaments, formed from the hexaheme cytochrome OmcS and the tetraheme cytochrome OmcE. Due to the highly conserved heme packing within the central OmcS and OmcE cores, and shared pattern of heme coordination between subunits, it has been suggested that these polymers have a common origin. We have now used cryo-electron microscopy (cryo-EM) to determine the structure of a third extracellular filament, formed from the Geobacter sulfurreducens octaheme cytochrome, OmcZ. In contrast to the linear heme chains in OmcS and OmcE from the same organism, the packing of hemes, heme:heme angles, and between-subunit heme coordination is quite different in OmcZ. A branched heme arrangement within OmcZ leads to a highly surface exposed heme in every subunit, which may account for the formation of conductive biofilm networks, and explain the higher measured conductivity of OmcZ filaments. This new structural evidence suggests that conductive cytochrome polymers arose independently on more than one occasion from different ancestral multiheme proteins.

AIM2-ASC inflammasomes are filamentous signalling platforms that play a central role in host innate defence. Here, the authors present the filament cryo-EM structure of the inflammasome receptor AIM2, which is very similar to the adaptor ASC filament structure. By employing Rosetta and Molecular Dynamics simulations the authors provide further insights into the directionality and recognition mechanisms of the individual AIM2 and ASC filaments, which is further validated with biochemical and cellular experiments.

Peptide-based filamentous assemblies are successfully used for generation of structurally ordered materials, but their de novo design and structural characterization is challenging. Here, the authors provide a strategy for the design of self-assembling peptide nanotubes based on modifications of an arginine clasp interaction motif, and report the cryo-EM structures of seven designed nanotubes.

Archaeal type IV pili (T4P) mediate adhesion to surfaces and are receptors for hyperthermophilic archaeal viruses. Here, the authors present the cryo-EM structures of two archaeal T4P from Pyrobaculum arsenaticum and Saccharolobus solfataricus and discuss evolutionary relationships between bacterial T4P, archaeal T4P and archaeal flagellar filaments.

Torsins are unusual AAA + ATPases of unknown function that reside in the endoplasmic reticulum of all animals. Here the authors report that TorsinA forms tubular helical filaments with an unusual periodicity and that filamentous TorsinA directly interacts with membranes to form tubular protrusions.

Due to its essential role in cellular processes, actin is a common target for bacterial toxins. One such toxin, TccC3, is an effector domain of the ABC-toxin produced by entomopathogenic bacteria of Photorhabdus spp. Unlike other actin-targeting toxins, TccC3 uniquely ADP-ribosylates actin at Thr-148, resulting in the formation of actin aggregates and inhibition of phagocytosis. It has been shown that the fully modified F-actin is resistant to depolymerization by cofilin and gelsolin, but their effects on partially modified actin were not explored. We found that only F-actin unprotected by tropomyosin is the physiological TccC3 substrate. Yet, ADP-ribosylated G-actin can be produced upon cofilin-accelerated F-actin depolymerization, which was only mildly inhibited in partially modified actin. The affinity of TccC3-ADP-ribosylated G-actin for profilin and thymosin-β4 was weakened moderately but sufficiently to potentiate spontaneous polymerization in their presence. Interestingly, the Arp2/3-mediated nucleation was also potentiated by T148-ADP-ribosylation. Notably, even partially modified actin showed reduced bundling by plastins and α-actinin. In agreement with the role of these and other tandem calponin-homology domain actin organizers in the assembly of the cortical actin network, TccC3 induced intense membrane blebbing in cultured cells. Overall, our data suggest that TccC3 imposes a complex action on the cytoskeleton by affecting F-actin nucleation, recycling, and interaction with actin-binding proteins involved in the integration of actin filaments with each other and cellular elements.

Summary: Intracellular protein filaments are ubiquitous for cellular functions, but forming bona fide biomimetic intracellular filaments of small molecules in living cells remains elusive. Here, we report the in situ formation of self-limiting intracellular filaments of a small peptide via enzymatic morphological transition of a phosphorylated and trimethylated heterochiral tetrapeptide. Enzymatic dephosphorylation reduces repulsive intermolecular electrostatic interactions and converts the peptidic nanoparticles into filaments, which exhibit distinct types of cross-β structures with either C7 or C2 symmetries, with the hydrophilic C-terminal residues at the periphery of the helix. Macromolecular crowding promotes the peptide filaments to form bundles, which extend from the plasma membrane to nuclear membrane and hardly interact with endogenous components, including cytoskeletons. Stereochemistry and post-translational modification (PTM) of peptides are critical for generating the intracellular bundles. This work may offer a way to gain lost functions or to provide molecular insights for understanding normal and aberrant intracellular filaments.

Only a few archaeal filamentous viruses have been structurally characterized. Here the authors describe the membrane-enveloped Sulfolobus filamentous virus 1 that infects Sulfolobus shibatae and present its 3.7 Å resolution cryo-EM structure, which reveals that major coat proteins are structurally conserved among archaeal filamentous viruses.

The disease causing L253P mutation in the actin-binding domain (ABD) of β-III-spectrin drastically increases actin-binding affinity. Here, the authors present the cryo-EM structure of F-actin complexed with the ABD mutant and double electron–electron resonance measurements show how the mutation affects the ABD conformational state.

Bacterial flagellar filaments are composed almost entirely of a single protein—flagellin—which can switch between different supercoiled states in a highly cooperative manner. Here the authors present near-atomic resolution cryo-EM structures of nine flagellar filaments, and begin to shed light on the molecular basis of filament switching.

Type IV pili are present on a wide range of bacterial pathogens and mediate diverse functions. Here the authors report a high resolution crystal structure of the pilin subunit PilE, and a cryoEM reconstruction of the Type IV pilus filament from N. meningitidisthat offer insight into pilus assembly and functions.

Uropathogenic E. coli (UPEC), which cause urinary tract infections (UTI), utilize type 1 pili, a chaperone usher pathway (CUP) pilus, to cause UTI and colonize the gut. The pilus rod, comprised of repeating FimA subunits, provides a structural scaffold for displaying the tip adhesin, FimH. We solved the 4.2 Å resolution structure of the type 1 pilus rod using cryo-electron microscopy. Residues forming the interactive surfaces that determine the mechanical properties of the rod were maintained by selection based on a global alignment of fimA sequences. We identified mutations that did not alter pilus production in vitro but reduced the force required to unwind the rod. UPEC expressing these mutant pili were significantly attenuated in bladder infection and intestinal colonization in mice. This study elucidates an unappreciated functional role for the molecular spring-like property of type 1 pilus rods in host-pathogen interactions and carries important implications for other pilus-mediated diseases.

Biological membranes create compartments, and are usually formed by lipid bilayers. However, in hyperthermophilic archaea that live optimally at temperatures above 80°C the membranes are monolayers which resemble fused bilayers. Many double-stranded DNA viruses which parasitize such hosts, including the filamentous virus AFV1 of Acidianus hospitalis, are enveloped with a lipid-containing membrane. Using cryo-EM, we show that the membrane in AFV1 is a ~2 nm-thick monolayer, approximately half the expected membrane thickness, formed by host membrane-derived lipids which adopt a U-shaped ‘horseshoe’ conformation. We hypothesize that this unusual viral envelope structure results from the extreme curvature of the viral capsid, as ‘horseshoe’ lipid conformations favor such curvature and host membrane lipids that permit horseshoe conformations are selectively recruited into the viral envelope. The unusual envelope found in AFV1 also has many implications for biotechnology, since this membrane can survive the most aggressive conditions involving extremes of temperature and pH.

Flagella are crucial for bacterial motility and pathogenesis. The flagellar capping protein (FliD) regulates filament assembly by chaperoning and sorting flagellin (FliC) proteins after they traverse the hollow filament and exit the growing flagellum tip. In the absence of FliD, flagella are not formed, resulting in impaired motility and infectivity. Here, we report the 2.2 Å resolution X-ray crystal structure of FliD from Pseudomonas aeruginosa, the first high-resolution structure of any FliD protein from any bacterium. Using this evidence in combination with a multitude of biophysical and functional analyses, we find that Pseudomonas FliD exhibits unexpected structural similarity to other flagellar proteins at the domain level, adopts a unique hexameric oligomeric state, and depends on flexible determinants for oligomerization. Considering that the flagellin filaments on which FliD oligomers are affixed vary in protofilament number between bacteria, our results suggest that FliD oligomer stoichiometries vary across bacteria to complement their filament assemblies.

Helical polymers are found throughout biology and account for a substantial fraction of the protein in a cell. These filaments are very attractive for three-dimensional reconstruction from electron micrographs due to the fact that projections of these filaments show many different views of identical subunits in identical environments. However, ambiguities exist in defining the symmetry of a helical filament when one has limited resolution, and mistakes can be made. Until one reaches a near-atomic level of resolution, there are not necessarily reality-checks that can distinguish between correct and incorrect solutions. A recent paper in eLife (Xu et al., 2014) almost certainly imposed an incorrect helical symmetry and this can be seen using filament images posted by Xu et al. A comparison between the atomic model proposed and the published three-dimensional reconstruction should have suggested that an incorrect solution was found.

Protein filaments are ubiquitous in nature and have diverse biological functions. Cryo-electron microscopy (cryo-EM) enables the determination of atomic structures, even from native samples, and is capable of identifying previously unknown filament species through high-resolution cryo-EM maps. In this study, we determine the structure of an unreported filament species from a cryo-EM dataset collected from Bacillus amyloiquefaciens biofilms. These filaments are composed of GerQ, a spore coat protein known to be involved in Bacillus spore germination. GerQ assembles into a structurally stable architecture consisting of rings containing nine subunits, which stacks to form filaments. Molecular dockings and model predictions suggest that this nine-subunit structure is suitable for binding CwlJ, a protein recruited by GerQ and essential for Ca2+-DPA induced spore germination. While the assembly state of GerQ within the spores and the direct interaction between GerQ and CwlJ have yet to be validated through further experiments, our findings provide valuable insights into the self-assembly of GerQ and enhance our understanding of its role in spore germination. Here, the authors structurally characterise a protein filament species composed of the spore coat protein GerQ using cryo-EM. The nine-subunit assembly sheds light on spore biology and hints at an interaction with CwlJ, a protein required for spore germination. [ABSTRACT FROM AUTHOR]

The "laboratory" of cells has the capacity to polymerize monosaccharides, amino acids, and nucleotides. Tumor cells, characterized by the overexpression of multiple enzymes and existing in a slightly acidic and highly redox‐potent environment, have attracted the attention of chemists aiming to transfer chemical reactions from the traditional laboratory flask to this "cellular laboratory". Polymers, resulting from the repetitive linkage of monomers, have garnered extensive utility in the biomedical field due to their diverse structural and physicochemical properties. When the polymerization reaction proceeds in situ within the tumor cells, this in situ transformation from small‐to‐large combines the rapid uptake of monomeric molecules with the strong retention ability of polymers, exerting a profound impact on drug delivery within tumors. Moreover, it shows promising applications in the regulation of cell behavior, imaging, therapy, and theranostics. Given the diverse functions of in situ polymerization in relation to tumor cells, this review focuses on a comprehensive examination of various strategies for in situ polymerization within tumor cells, categorizing these strategies based on the formation mechanisms of polymers. The applications in this domain concerning in situ polymerization within tumor cells are also explored. Moreover, a discussion of specific limitations in current research and insights into potential future directions from the authors' perspective are provided. [ABSTRACT FROM AUTHOR]

Crosstalk between the actin and microtubule cytoskeletons is important for many cellular processes. Recent studies have shown that microtubules and F-actin can assemble to form a composite structure where F-actin occupies the microtubule lumen. Whether these cytoskeletal hybrids exist in physiological settings and how they are formed is unclear. Here, we show that the short-crossover Class I actin filament previously identified inside microtubules in human HAP1 cells is cofilin-bound F-actin. Lumenal F-actin can be reconstituted in vitro, but cofilin is not essential. Moreover, actin filaments with both cofilin-bound and canonical morphologies reside within human platelet microtubules under physiological conditions. We propose that stress placed upon the microtubule network during motor-driven microtubule looping and sliding may facilitate the incorporation of actin into microtubules. Using focused ion beam milling and cryoelectron tomography, Tsuji et al. found actin filaments, with both cofilin-bound and canonical morphologies, within the lumen of human platelet microtubules and reconstituted these structures in vitro. [ABSTRACT FROM AUTHOR]

Type IV pili (T4P) represent one of the most common varieties of surface appendages in archaea. These filaments, assembled from small pilin proteins, can be many microns long and serve diverse functions, including adhesion, biofilm formation, motility, and intercellular communication. Here, we determine atomic structures of two distinct adhesive T4P from Saccharolobus islandicus via cryo-electron microscopy (cryo-EM). Unexpectedly, both pili were assembled from the same pilin polypeptide but under different growth conditions. One filament, denoted mono-pilus, conforms to canonical archaeal T4P structures where all subunits are equivalent, whereas in the other filament, the tri-pilus, the same polypeptide exists in three different conformations. The three conformations in the tri-pilus are very different from the single conformation found in the mono-pilus, and involve different orientations of the outer immunoglobulin-like domains, mediated by a very flexible linker. Remarkably, the outer domains rotate nearly 180° between the mono- and tri-pilus conformations. Both forms of pili require the same ATPase and TadC-like membrane pore for assembly, indicating that the same secretion system can produce structurally very different filaments. Our results show that the structures of archaeal T4P appear to be less constrained and rigid than those of the homologous archaeal flagellar filaments that serve as helical propellers. Type IV pili (T4P) are long surface appendages assembled from small pilin proteins that participate in diverse functions such as adhesion and biofilm formation in archaea. Here, the authors show that the same pilin polypeptide can adopt four conformations and assemble two distinct T4P structures under different growth conditions. [ABSTRACT FROM AUTHOR]

A contractile sheath and rigid tube assembly is a widespread apparatus used by bacteriophages, tailocins, and the bacterial type VI secretion system to penetrate cell membranes. In this mechanism, contraction of an external sheath powers the motion of an inner tube through the membrane. The structure, energetics, and mechanism of the machinery imply rigidity and straightness. The contractile tail of Agrobacterium tumefaciens bacteriophage Milano is flexible and bent to varying degrees, which sets it apart from other contractile tail-like systems. Here, we report structures of the Milano tail including the sheath-tube complex, baseplate, and putative receptor-binding proteins. The flexible-to-rigid transformation of the Milano tail upon contraction can be explained by unique electrostatic properties of the tail tube and sheath. All components of the Milano tail, including sheath subunits, are crosslinked by disulfides, some of which must be reduced for contraction to occur. The putative receptor-binding complex of Milano contains a tailspike, a tail fiber, and at least two small proteins that form a garland around the distal ends of the tailspikes and tail fibers. Despite being flagellotropic, Milano lacks thread-like tail filaments that can wrap around the flagellum, and is thus likely to employ a different binding mechanism. Sonani et al. report the cryo-EM structures of the Milano phage tail, unraveling the mechanism of its flexible-to-rigid transformation, the inter-chain disulfide network hindering tail contraction and the structural organization of receptor binding proteins. [ABSTRACT FROM AUTHOR]

Baculovirus Autographa californica multiple nucleopolyhedrovirus (AcMNPV) has been widely used as a bioinsecticide and a protein expression vector. Despite their importance, very little is known about the structure of most baculovirus proteins. Here, we show a 3.2 Å resolution structure of helical cylindrical body of the AcMNPV nucleocapsid, composed of VP39, as well as 4.3 Å resolution structures of both the head and the base of the nucleocapsid composed of over 100 protein subunits. AcMNPV VP39 demonstrates some features of the HK97-like fold and utilizes disulfide-bonds and a set of interactions at its C-termini to mediate nucleocapsid assembly and stability. At both ends of the nucleocapsid, the VP39 cylinder is constricted by an outer shell ring composed of proteins AC104, AC142 and AC109. AC101(BV/ODV-C42) and AC144(ODV-EC27) form a C14 symmetric inner layer at both capsid head and base. In the base, these proteins interact with a 7-fold symmetric capsid plug, while a portal-like structure is seen in the central portion of head. Additionally, we propose an application of AlphaFold2 for model building in intermediate resolution density. Baculovirus Autographa californica multiple nucleopolyhedrovirus (AcMNPV) is used as a bioinsecticide and a protein expression vector. Here, the authors report structures of cylindrical body of the AcMNPV nucleocapsid, as well as of both the nucleocapsid head and base. [ABSTRACT FROM AUTHOR]

Large gaps exist in our understanding of how bacteriophages, the most abundant biological entities on Earth, assemble and function. The structure of the "neck" region, where the DNA-filled capsid is connected to the host-recognizing tail remains poorly understood. We describe cryo-EM structures of the neck, the neck-capsid and neck-tail junctions, and capsid of the Agrobacterium phage Milano. The Milano neck 1 protein connects the 12-fold symmetrical neck to a 5-fold vertex of the icosahedral capsid. Comparison of Milano neck 1 homologs leads to four proposed classes, likely evolved from the simplest one in siphophages to more complex ones in myo- and podophages. Milano neck is surrounded by the atypical collar, which covalently crosslinks the tail sheath to neck 1. The Milano capsid is decorated with three types of proteins, a minor capsid protein (mCP) and two linking proteins crosslinking the mCP to the major capsid protein. The extensive network of disulfide bonds within and between neck, collar, capsid and tail provides an exceptional structural stability to Milano. Cryo-EM structures of the neck, neck-capsid and neck-tail junctions, and the capsid of the phage Milano reveal a unique collar structure and an extensive network of disulfide bonds providing structural stability to the phage. [ABSTRACT FROM AUTHOR]

Flagellar motility has independently arisen three times during evolution: in bacteria, archaea, and eukaryotes. In prokaryotes, the supercoiled flagellar filaments are composed largely of a single protein, bacterial or archaeal flagellin, although these two proteins are not homologous, while in eukaryotes, the flagellum contains hundreds of proteins. Archaeal flagellin and archaeal type IV pilin are homologous, but how archaeal flagellar filaments (AFFs) and archaeal type IV pili (AT4Ps) diverged is not understood, in part, due to the paucity of structures for AFFs and AT4Ps. Despite having similar structures, AFFs supercoil, while AT4Ps do not, and supercoiling is essential for the function of AFFs. We used cryo-electron microscopy to determine the atomic structure of two additional AT4Ps and reanalyzed previous structures. We find that all AFFs have a prominent 10-strand packing, while AT4Ps show a striking structural diversity in their subunit packing. A clear distinction between all AFF and all AT4P structures involves the extension of the N-terminal α-helix with polar residues in the AFFs. Additionally, we characterize a flagellar- like AT4P from Pyrobaculum calidifontis with filament and subunit structure similar to that of AFFs which can be viewed as an evolutionary link, showing how the structural diversity of AT4Ps likely allowed for an AT4P to evolve into a supercoiling AFF. [ABSTRACT FROM AUTHOR]

In its simplest form, bacterial flagellar filaments are composed of flagellin proteins with just two helical inner domains, which together comprise the filament core. Although this minimal filament is sufficient to provide motility in many flagellated bacteria, most bacteria produce flagella composed of flagellin proteins with one or more outer domains arranged in a variety of supramolecular architectures radiating from the inner core. Flagellin outer domains are known to be involved in adhesion, proteolysis and immune evasion but have not been thought to be required for motility. Here we show that in the Pseudomonas aeruginosa POA1 strain, a bacterium that forms a ridged filament with a dimerization of its flagellin outer domains, motility is categorically dependent on these flagellin outer domains. Moreover, a comprehensive network of intermolecular interactions connecting the inner domains to the outer domains, the outer domains to one another, and the outer domains back to the inner domain filament core, is required for motility. This inter-domain connectivity confers PAO1 flagella with increased stability, essential for its motility in viscous environments. Additionally, we find that such ridged flagellar filaments are not unique to Pseudomonas but are, instead, present throughout diverse bacterial phyla. Author summary: Opportunistic bacteria like Pseudomonas aeruginosa use flagella to move freely through the environment, adhere to surfaces and infect the host. The most prominent component of the flagellum is a hollow filament made of thousands of copies of the protein flagellin, or FliC. Inner part of the filament, the core, is structurally the same in all flagellated bacteria, while surface-exposed flagellin domains differ significantly, and their exact role is not fully understood. Here we present a new type of filament organization in which outer domains establish extensive contacts with the core and dimerize along the axis resulting in a ridged filament type. By studying the effects of mutations on bacterial swimming, we found that outer domains of the ridged filaments of Pseudomonas are indispensable for swimming, unlike the outer domains of Salmonella. Certain contacts between outer domains themselves and outer domains and the core allow bacteria to swim efficiently through porous or viscous environments. We found that this type of filament organization is present in many other bacterial species not closely related to P. aeruginosa, suggesting that this type of filament architecture could be advantageous in colonization. [ABSTRACT FROM AUTHOR]

Conjugation is a major mechanism of horizontal gene transfer promoting the spread of antibiotic resistance among human pathogens. It involves establishing a junction between a donor and a recipient cell via an extracellular appendage known as the mating pilus. In bacteria, the conjugation machinery is encoded by plasmids or transposons and typically mediates the transfer of cognate mobile genetic elements. Much less is known about conjugation in archaea. Here, we determine atomic structures by cryo-electron microscopy of three conjugative pili, two from hyperthermophilic archaea (Aeropyrum pernix and Pyrobaculum calidifontis) and one encoded by the Ti plasmid of the bacterium Agrobacterium tumefaciens, and show that the archaeal pili are homologous to bacterial mating pili. However, the archaeal conjugation machinery, known as Ced, has been 'domesticated', that is, the genes for the conjugation machinery are encoded on the chromosome rather than on mobile genetic elements, and mediates the transfer of cellular DNA. Bacteria can exchange DNA through extracellular appendages ('mating pili') in a process known as conjugation. Here, Beltran et al. determine atomic structures by cryo-electron microscopy of a bacterial conjugative pilus and two archaeal pili, showing that the archaeal pili are homologous to bacterial mating pili. [ABSTRACT FROM AUTHOR]

This short review begins with the theories of Airy, Rayleigh and Abbe on microscope resolution. Next, the principal developments in microscopy in the last half-century are examined for relevance to ophthalmology: confocal microscopy, photoactivation light microscopy (PALM), stochastic optical reconstruction microscopy (STORM), stimulated emission depletion (STED), structured illumination (SI), 2-photon and multiphoton excitation microscopy with a focused beam. Except for confocal, these are difficult to apply to the eye in vivo, as are the interference methods available in microscopes. However, interferometry in the form of coherence tomography is now a major ophthalmic method which has diverged from microscopy. Multiphoton excitation microscopy with an unfocussed beam is a new, low-damage microscope method so-far not exploited in ophthalmoscopy. The Mesolens, which throws off the historic limitations in microscopy set by the human eye, is described as a possible future aid to ophthalmology of the anterior eye., (© 2024. The Author(s), under exclusive licence to The Royal College of Ophthalmologists.)

Since the 1760s, at least three industrial revolutions have occurred. To explain this phenomenon, we introduce two-dimensional (2D) constrained chaos. Using a model of innovation dynamics, we show that an industrial-revolution-like technology burst, driven by investment/saving motives for R&D activities, recurs about every one hundred years if the monopolistic use of a new technology lasts about 8 y. [ABSTRACT FROM AUTHOR]

Due to its essential role in cellular processes, actin is a common target for bacterial toxins. One such toxin, TccC3, is an effector domain of the ABC-toxin produced by entomopathogenic bacteria of Photorhabdus spp. Unlike other actin-targeting toxins, TccC3 uniquely ADP-ribosylates actin at Thr-148, resulting in the formation of actin aggregates and inhibition of phagocytosis. It has been shown that the fully modified F-actin is resistant to depolymerization by cofilin and gelsolin, but their effects on partially modified actin were not explored. We found that only F-actin unprotected by tropomyosin is the physiological TccC3 substrate. Yet, ADP-ribosylated G-actin can be produced upon cofilin-accelerated F-actin depolymerization, which was only mildly inhibited in partially modified actin. The affinity of TccC3-ADP-ribosylated G-actin for profilin and thymosin-β4 was weakened moderately but sufficiently to potentiate spontaneous polymerization in their presence. Interestingly, the Arp2/3-mediated nucleation was also potentiated by T148-ADP-ribosylation. Notably, even partially modified actin showed reduced bundling by plastins and α-actinin. In agreement with the role of these and other tandem calponin-homology domain actin organizers in the assembly of the cortical actin network, TccC3 induced intense membrane blebbing in cultured cells. Overall, our data suggest that TccC3 imposes a complex action on the cytoskeleton by affecting F-actin nucleation, recycling, and interaction with actin-binding proteins involved in the integration of actin filaments with each other and cellular elements. [ABSTRACT FROM AUTHOR]

Flagellar filaments function as the propellers of the bacterial flagellum and their supercoiling is key to motility. The outer domains on the surface of the filament are non-critical for motility in many bacteria and their structures and functions are not conserved. Here, we show the atomic cryo-electron microscopy structures for flagellar filaments from enterohemorrhagic Escherichia coli O157:H7, enteropathogenic E. coli O127:H6, Achromobacter, and Sinorhizobium meliloti, where the outer domains dimerize or tetramerize to form either a sheath or a screw-like surface. These dimers are formed by 180° rotations of half of the outer domains. The outer domain sheath (ODS) plays a role in bacterial motility by stabilizing an intermediate waveform and prolonging the tumbling of E. coli cells. Bacteria with these ODS and screw-like flagellar filaments are commonly found in soil and human intestinal environments of relatively high viscosity suggesting a role for the dimerization in these environments. It has been suggested that the outer domains of bacterial flagellins are not needed for motility. Here, the authors show that flagellar filament outer domains from some bacteria have unique structures which can alter the motility of the bacteria. [ABSTRACT FROM AUTHOR]