Search

Cellular solids whose ligaments are made of two distinct materials are constructed for studying their auxeticity and negative thermal expansion via 2D models with the methodology of finite‐element numerical analysis. Three bimaterial cellular models with various radii of ligament curvature (Rc = 5, 8, 11 cm) are analyzed. It is found that when the ligaments comprise aluminum and titanium alloy with Rc = 5 cm, the cellular solid exhibits simultaneous negative effective Poisson's ratio (−0.418) and negative thermal expansion coefficient (−20.82 × 10−6 K−1). When the radius of ligament curvature increases, auxeticity is less pronounced. Positive and negative thermal expansion can be tuned solely by the coefficients of thermal expansion of ligaments' constituents. Furthermore, smaller radii of curvature give rise to larger negative thermal expansion. In addition, modulus mismatch in the bimaterial ligament can be used to tune overall properties. Our findings herein may serve as foundations for the future quantitative design of such cellular materials. In addition, effective Poisson's ratio and coefficient of thermal expansion can be positively or negatively enhanced due to the interplay between the positive and negative phases. Interactions between negative stiffness and larger curvatures may make the system less unstable. [ABSTRACT FROM AUTHOR]

Chiral materials may exhibit negative Poisson's ratio and deformation‐mode coupling phenomena. The finite element numerical method is adopted to analyze a class of 2D chiral and nonchiral materials and to show the effects of microstructural geometry on their effective elastic properties and coupling between tension/compression and bending. With the same area fraction (AF), nonchiral samples show larger effective moduli than chiral ones. The number of unit cells may reduce negativity in effective Poisson's ratio of the chiral samples due to nonuniform lateral deformation under uniaxial straining. Increasing AF in a hierarchical pattern in the chiral samples makes their Poisson's ratio more negative. Bending occurs in the chiral samples when they are under uniform, uniaxial, tensile, or compressive straining due to the coupling of deformation modes. The sensibility of tension–bending coupling may be controlled by the chiral microstructure. Optimization of the coupling sensitivity may help develop novel mechanical sensors. [ABSTRACT FROM AUTHOR]

Honeycombs or foams with reentrant microstructures exhibit effective negative Poisson's ratio. Although they are light weight due to inherently empty space, their overall stiffness and damping are somewhat limited. With judiciously chosen filler material to fill the voids in star‐shaped honeycomb, it is numerically demonstrated its auxeticity may be enhanced. By combining the filler and skeleton, the hierarchical composite materials are constructed. The magnitude of the enhancement depends on inner and outer filler's modulus mismatch, as well as the types of filling. Filler's auxeticity also largely enhances overall auxeticity of the outer‐ and all‐filled honeycomb. In addition, for outer‐filled honeycomb, its effective viscoelastic modulus and damping are significantly increased, while maintaining relatively light weight, due to local stress concentration. [ABSTRACT FROM AUTHOR]

Microstructured plates, consisting of various conventional and re-entrant cells, are numerically constructed and analyzed for their effective elastic properties under in-plane deformation. The finite element numerical method is adopted. The calculated effective Poisson's ratios of the plates are found to be in the range between −1 and 1, in consistency with the theory of two-dimensional elasticity. Auxetic angles need to be greater than about 20° in order to obtain negative Poisson's ratio. Increasing the auxetic angles reduces the effective pure shear modulus. Elastically anisotropic characteristics of the homogenized plate are analyzed with the calculated effective Young's modulus, Poisson's ratio, and pure shear modulus. [ABSTRACT FROM AUTHOR]

Two‐dimensional (2D) elastic materials consisting of microstructure may exhibit positive or negative effective Poisson's ratio in the range between −1 and +1. Wang et al. (article no. 1700024) adopt the finite element numerical method, and systematically analyse the 2D medium with conventional or re‐entrant cell‐shape defined by the auxetic angle (θ). When θ = −45°, the microstructural cell has the diamond shape, and the corresponding effective Poisson's ratio is close to +1. As θ increases to positive values, the microstructure gradually changes to re‐entrant shapes. Not all re‐entrant cell shapes give rise to negative Poisson's ratio. To obtain negative Poisson's ratio, the auxetic angle needs to be greater than about 20°. Increasing auxetic angles reduce the effective pure shear modulus monotonically, while the effective Young's modulus shows a slight hump around θ = 25°. Full anisotropic elastic constants of the 2D medium are calculated, and its partial auxetic characteristics is revealed. [ABSTRACT FROM AUTHOR]