Search

The delta of the Mekong River is one of the largest in the world, with the Mekong River carrying a large amount of sediments in its Region of Freshwater Influence (ROFI). This study investigates the flow structure and movement of both suspended and bedload sediments in the ROFI of the Lower Mekong Delta (LMD) in order to identify areas prone to sediment accretion and erosion. This is accomplished by applying the three-dimensional Coastal and Regional Ocean COmmunity (CROCO) model and then calculating the sediment budget of different stretches of the coastline. The model outputs, depicting areas experiencing sediment accretion and erosion along the coastline of the LMD, are then compared against observations obtained during the period 1990–2015 and demonstrate the ability of the model to identify areas particularly prone to erosion and where preventive actions against coastal erosion should focus. [ABSTRACT FROM AUTHOR]

The estuaries and coastal zones of the Vietnamese Mekong Delta located at the end of the Mekong Basin are susceptible to a large variety of natural threats and human interventions such as upstream dam construction, climate change and sea level rise. In this study, we investigated sediment dynamics and morphodynamic changes in the Mekong estuaries and coastal zone, using a well-calibrated Delft3D-4 model for a 10-years period simulation. For the first time, the impacts of different drivers were distinguished to guide future adaptation strategies and policies. Our investigations pointed out that the influences of upstream sediment reduction and large-scale sand extraction would cause substantial modifications in the subaqueous delta region. Besides human-induced impacts, modeling results also showed that the sediment volume and spatial distribution changed through the simulated period according to monsoonal variation. The influence of each driver, however, not only varied in space but also time. In the flood season, the Mekong and Bassac Rivers provided a large amount of sediment (more than 90%) that was deposited on the delta front due to coastal processes. The sediment quantity transported along the coastline changed with the monsoon and was in a dominantly south-west direction due to the northeast monsoon, especially in November, December and January. As a natural process, in the estuarine region, erosion and deposition occurred alternately, but the south-west coast region (belonging to the Ca Mau peninsula) was dominated by erosion. This is because of the formation of sand bars in front of the Bassac estuaries, which influences the capacity of sediment transportation to the south-west. Consequently, navigation capacity will reduce significantly in the estuaries and coastline erosion in the Ca Mau peninsula leads to substantial loss of houses and assets of local people. Urgent actions such as stopping sand mining or modifying dam designs are needed to sustain the delta coastline. • A well-calibrated Delft3D model against observed and remote sensing data. • Sediment transport is strongly driven by both river discharges and monsoons. • Long-term sand bar formation diverted the direction of current sediment flows. • Human activities will lead to the severe recession of the delta. [ABSTRACT FROM AUTHOR]

Large-scale coastal erosion in the Mekong Delta has been dramatically increasing in severity in recent decades. There are several effective hard engineering solutions that have been implemented in this delta to efficiently prevent coastal erosion and stimulate sedimentation while supporting the local ecosystem conservation. These measures include Pile-Rock Breakwaters (PRBW), Hollow Triangle Breakwaters (HTB) and Semicircular Breakwaters (SBW). However, research on the sediment transport, morphological changes and toe erosion for these offshore breakwaters is very limited and is currently in the initial stages of understanding the specific conditions of sediment characteristics and foundations. The objective of this study was to reproduce the morphological changes and toe erosion of three breakwaters due to wave-structure interactions. This was investigated using 2D physical models with 3000 irregular waves during 8 experimental hours (equal to 15,000*T p). To extract the bed morphological changes and toe erosion both specialized laser measurements (SW50M laser ruler) and analysis of high-speed video recording by images digitalization were applied. The experimental results show that the shape and structural design of offshore breakwaters can have a significant influence on the bed morphology on both the seaside and the leeside. We found that generally the toe of the construction on the seaside was eroded due to the occurrence of reflected waves, and that the flow is narrowed while passing through the construction, increasing the flow velocity and causing toe erosion. Additionally, the accretion of sediment at the leeside of the breakwaters was found to be mainly driven by the transport of sediment through the construction. Comparing the breakwater designs the experimental results showed that the HTB has the maximum accretion rate behind the structure, as well as the fastest accretion rate behind the breakwater. The SBW has high wave energy dissipation efficiency, although the toe erosion rate is faster than the other classes of breakwaters. The PRBW shows the fastest toe erosion rate in front of the structure and causes accretion at the leeside of the construction but at a lower rate than the HTB. The findings from this study will help practical designers to reinforce the foot of construction during real breakwater designing and inform stability calculations. We recommendation is to apply these three classes of breakwaters, especially the HTB and SBW, for stimulating sedimentation for mangrove restoration in the mangrove mud-coast delta. • Morphology and toe erosion of three breakwaters were tested using laboratory physical models. • Pile-rock (PRBW), hollow triangle (HTB), and semi-circular breakwaters (SBW) are compared. • PRBW had the largest front erosion and the slowest accretion rate behind the structure. • HTB demonstrates the fastest accretion rate and the largest sedimentation area behind the breakwater. • SBW had high wave energy dissipation efficiency, but a faster toe erosion rate. [ABSTRACT FROM AUTHOR]