Search

Natural minerals are generally accepted as one of the most suitable carriers to support TiO 2 in photocatalytic and other applications because of their abundance, low cost, large surface area, and easy recyclability. Hence, in this work, a novel 0D/2D TiO 2 /kaolinite composite endowed with presence of oxygen vacancies and surface defect sites was synthesized through a mild sol-gel method combining with nitrogen induction. Ciprofloxacin (CIP) was taken as the main target organic pollutant to study the photocatalytic performance of the synthesized catalyst. The results showed that the nitrogen treated TiO 2 /kaolinite composite exhibited improving degradation performance for adsorption-photocatalytic elimination of CIP within broad radiation spectrum (200–800 nm). The synthesized composite exhibited enhanced reaction rate constant which is nearly 7.00, 2.54 and 3.13 times higher than that of bare TiO 2 treated with air under UV, solar, and visible light, respectively. Moreover, the newly prepared composite also exhibited significant enhancement towards the removal of formaldehyde under both UV and visible light. Radical scavenger experiments and ESR results indicated that holes should be the main oxidizing species within broad spectrum in the degradation system. The enhanced activity of nitrogen treated composite is mainly attributed to the induced oxygen vacancies as well as the intimate interface contact between TiO 2 and kaolinite, resulting in smaller grain size, higher light absorption ability, and faster carrier separation efficiency. It is expected that this high-efficiency composite photocatalyst based on natural minerals will be a promising candidate for the elimination of pharmaceutical and personal care products and volatile organic compounds within broad radiation spectrum. [ABSTRACT FROM AUTHOR]

Diatomite, a porous non-metal mineral, was used as support to prepare TiO 2 /diatomite composites by a modified sol–gel method. The as-prepared composites were calcined at temperatures ranging from 450 to 950 °C. The characterization tests included X-ray powder diffraction (XRD), scanning electron microscopy (SEM) with an energy-dispersive X-ray spectrometer (EDS), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption/desorption measurements. The XRD analysis indicated that the binary mixtures of anatase and rutile exist in the composites. The morphology analysis confirmed the TiO 2 particles were uniformly immobilized on the surface of diatom with a strong interfacial anchoring strength, which leads to few drain of photocatalytic components during practical applications. In further XPS studies of hybrid catalyst, we found the evidence of the presence of Ti–O–Si bond and increased percentage of surface hydroxyl. In addition, the adsorption capacity and photocatalytic activity of synthesized TiO 2 /diatomite composites were evaluated by studying the degradation kinetics of aqueous Rhodamine B under UV-light irradiation. The photocatalytic degradation was found to follow pseudo-first order kinetics according to the Langmuir–Hinshelwood model. The preferable removal efficiency was observed in composites by 750 °C calcination, which is attributed to a relatively appropriate anatase/rutile mixing ratio of 90/10. [ABSTRACT FROM AUTHOR]