Search

This paper presents a stochastic analysis of the size effect on the nominal strength of quasibrittle structures with a large preexisting notch. This type of scaling behavior has been extensively studied within a deterministic framework. Little attention is paid to stochastic analysis, which is essential for reliability-based analysis and design of engineering structures. Stochastic finite element simulations are performed to study the failure of geometrically similar beams of different sizes. The numerical analysis uses a continuum damage model, in which the tensile strength and fracture energy are modeled by homogeneous random fields. Different correlation lengths are considered as a parametric study. The analysis yields the size effects on the mean and coefficient of variation (CoV) of the nominal structural strength. It is shown that the size effect on the mean strength agrees well with the Bazant size effect model. The simulation predicts a strong size effect on the CoV of the nominal strength. Small-, intermediate-, and large-size asymptotes are derived analytically for the scaling behavior of the strength CoV. Based on these asymptotes, an approximate scaling equation is proposed for the CoV of nominal strength. The effect of the correlation length on the simulated failure behavior is discussed. [ABSTRACT FROM AUTHOR]

The rolling resistance is an artificial moment arising on the contact of two discrete elements which mimics resistance of two grains of complex shape in contact rolling relatively to each other. The paper investigates the influence of rolling resistance on behaviour of an assembly of spherical discrete elements. Besides the resistance to rolling, the contacts between spherical particles obey the Hertzian law in normal straining and Coulomb model of friction in shear.

The contribution presents simulations on concrete specimens. The discrete meso-scale particle model with random geometry based on Voronoi tessellation is used. The model was enhanced with dynamic solver based on implicit Newmark method. Model is tested on cantilever beam loaded by a force at the free end to verify the ability of the model to simulate the dynamic behavior of a simple linear elastic material. Results computed with different time discretization and model settings are compared. The behavior of the model in nonlinear regime is investigated on concrete specimens loaded at different displacement rates. The constitutive law used within this contribution is insensitive to strain rate.

Anchored by the theory of extreme value statistics, Weibull distribution is the most widely used mathematical model for strength distribution of brittle structures. In a series of recent studies, a finite weakest-link model was developed for strength distribution of quasi-brittle structures, and the classical Weibull distribution was shown to represent the large-size asymptote of the model. By employing a length scale, the finite weakest-link model is capable of capturing correctly the size effects on both the probability distribution and the mean value of structural strength. However, the connection of this length scale with the basic material properties is still missing. This study investigates the relationship between the length scale of the finite weakest-link model and the material length scales by analyzing the size effect on the mean structural strength. The mathematical form of this relationship is derived through dimensional analysis. To validate the model, a set of mean size effect curves is obtained through stochastic simulations, which use a nonlinear constitutive model involving both the Irwin characteristic length and the crack band width. The internal length scale of the weakest-link model is determined by optimum fitting of the benchmark size effect curves in the small-size range. Furthermore, the effect of stress field on this internal length scale is studied by considering three different loading configurations. The present analysis reveals the importance of the mean size effect analysis for the calibration of finite weakest-link model. [ABSTRACT FROM AUTHOR]

The paper studies systems of rigid bodies with randomly generated geometry interconnected by normal and tangential bonds. The stiffness of these bonds determines themacroscopic elastic modulus while the macroscopic Poisson's ratio of the system is determined solely by the normal/tangential stiffness ratio. Discrete models with no directional bias have the same probability of element orientation for any direction and therefore the same mechanical properties in a statistical sense at any point and direction. However, the layers of elements in the vicinity of the boundary exhibit biased orientation, preferring elements parallel with the boundary. As a consequence, when strain occurs in this direction, the boundary layer becomes stiffer than the interior for the normal/tangential stiffness ratio larger than one, and vice versa. Nonlinear constitutive laws are typically such that the straining of an element in shear results in higher strength and ductility than straining in tension. Since the boundary layer tends, due to the bias in the elemental orientation, to involve more tension than shear at the contacts, it also becomes weaker and less ductile. The paper documents these observations and compares them to the results of theoretical analysis. [ABSTRACT FROM AUTHOR]

The rolling resistance is an artificial moment arising on the contact of two discrete elements which mimics resistance of two grains of complex shape in contact rolling relatively to each other. The paper investigates the influence of rolling resistance on behaviour of an assembly of spherical discrete elements. Besides the resistance to rolling, the contacts between spherical particles obey the Hertzian law in normal straining and Coulomb model of friction in shear. [ABSTRACT FROM AUTHOR]

The contribution presents simulations on concrete specimens. The discrete meso-scale particle model with random geometry based on Voronoi tessellation is used. The model was enhanced with dynamic solver based on implicit Newmark method. Model is tested on cantilever beam loaded by a force at the free end to verify the ability of the model to simulate the dynamic behavior of a simple linear elastic material. Results computed with different time discretization and model settings are compared. The behavior of the model in nonlinear regime is investigated on concrete specimens loaded at different displacement rates. The constitutive law used within this contribution is insensitive to strain rate. [ABSTRACT FROM AUTHOR]