Search

How to effectively solve traffic congestion and transportation pollution in urban development is a main research emphasis for transportation management agencies. A carbon emissions tax can affect travelers’ generalized costs and will lead to changes in passenger demand, mode choice and traffic flow equilibrium in road networks, which are of significance in green travel and low-carbon transportation management. This paper first established a mesoscopic model to calculate the carbon emissions tax and determined the value of this charge in China, which was based on road traffic flow, vehicle speed, and carbon emissions. Referring to existing research results to calibrate the value of time, this paper modified the traveler’s generalized cost function, including the carbon emissions tax, fuel surcharge and travel time cost, which can be used in the travel impedance model with the consideration of the carbon emissions tax. Then, a method for analyzing urban road network traffic flow distribution was put forward, and a joint traffic distribution model was established, which considered the relationship between private cars and taxis. Finally, this paper took the city of Panjin as an example to analyze the road traffic carbon emissions tax’s impact. The results illustrated that the carbon emissions tax has a positive effect on road network flow equilibrium and carbon emission reduction. This paper will have good reference value and practical significance for the calculation and implementation of urban traffic carbon emissions taxes in China. [ABSTRACT FROM AUTHOR]

This paper presents an evaluation of the effectiveness of two types of deceleration markings on freeways in China: fishbone-shaped (FS) markings and edge-rate (ER) markings. An actual 4-lane, 6-km long freeway in Province Hebei was created in a driving simulator and used for the experiments. Three scenarios of deceleration markings were adopted: one without markings, one with FS markings, and the third with ER markings. For each scenario, three traffic flow levels were adopted (low, medium, and heavy). The appropriate dimensions of deceleration markings were first established using relevant design guidelines and then used to develop the simulation scenarios using Multigen Creator software. Sixty drivers carried out the simulation experiments with eye tracker equipment. The adequacy of deceleration markings was analyzed with respect to speed, perceived distance, pupil diameter, and geometric parameters. The results showed that both types of deceleration markings made a certain effect on vehicle speed, drivers’visual behavior, and mental characteristics. However, the effect of the FS markings was more pronounced than that of the ER marking. Specifically, the FS markings showed a speed reduction of 12.3 km/h to 15.2 km/h and a perceived distance of 70 m to 90 m, compared with 6.7 km/h to 9.9 km/h and 40 m to 60 m, respectively, for the ER markings. Application comments of the results are provided in the conclusion. [ABSTRACT FROM AUTHOR]

Circuity, defined as the ratio of the shortest network distance to the Euclidean distance between one origin–destination (O-D) pair, can be adopted as a helpful evaluation method of indirect degrees of train paths. In this paper, the maximum circuity of the paths of operated trains is set to be the threshold value of the circuity of high-speed train paths. For the shortest paths of any node pairs, if their circuity is not higher than the threshold value, the paths can be regarded as the reasonable paths. With the consideration of a certain relative or absolute error, we cluster the reasonable paths on the basis of their inclusion relationship and the center path of each class represents a passenger transit corridor. We take the high-speed rail (HSR) network in China at the end of 2014 as an example, and obtain 51 passenger transit corridors, which are alternative sets of train paths. Furthermore, we analyze the circuity distribution of paths of all node pairs in the network. We find that the high circuity of train paths can be decreased with the construction of a high-speed railway line, which indicates that the structure of the HSR network in China tends to be more complete and the HSR network can make the Chinese railway network more efficient. [ABSTRACT FROM AUTHOR]

As a sustainable transportation mode, high-speed railway (HSR) has become an efficient way to meet the huge travel demand. However, due to the high acquisition and maintenance cost, it is impossible to build enough infrastructure and purchase enough train-sets. Great efforts are required to improve the transport capability of HSR. The utilization efficiency of train-sets (carrying tools of HSR) is one of the most important factors of the transport capacity of HSR. In order to enhance the utilization efficiency of the train-sets, this paper proposed a train-set circulation optimization model to minimize the total connection time. An innovative two-stage approach which contains segments generation and segments combination was designed to solve this model. In order to verify the feasibility of the proposed approach, an experiment was carried out in the Beijing-Tianjin passenger dedicated line, to fulfill a 174 trips train diagram. The model results showed that compared with the traditional Ant Colony Algorithm (ACA), the utilization efficiency of train-sets can be increased from 43.4% (ACA) to 46.9% (Two-Stage), and 1 train-set can be saved up to fulfill the same transportation tasks. The approach proposed in the study is faster and more stable than the traditional ones, by using which, the HSR staff can draw up the train-sets circulation plan more quickly and the utilization efficiency of the HSR system is also improved. [ABSTRACT FROM AUTHOR]

Objective: Many studies focused on reasons behind the increasing incidence and the spread of human brucellosis in mainland China, yet most of them lacked comprehensive consideration with quantitative evidence. Hence, this study aimed to further investigate the epidemic mechanism and associated factors of human brucellosis so as to provide thoughts for future countermeasures in China and the rest of the world. Methods: Data of human brucellosis incidence and some associated factors in economy, animal husbandry, transportation as well as health and hygiene were collected at provincial level from 2005–2016. Time series plots were first used to visualize the annual incidence and annual rate of change of human brucellosis for each province, then cluster analysis categorized all the 31 provinces of mainland China based on their incidence time series during the study period. In addition, according to the characteristics of data, the dynamic panel data model in combination with supervised principal component analysis was proposed to explore effects of associated factors on human brucellosis. Results: 1. The incidence rate of human brucellosis in mainland China increased three-fold from 1.41 per 100,000 people in 2005 to 4.22 per 100,000 people in 2014, though it went down a little in 2015 and 2016. Incidence rates in the north have always been higher than those in the south, but the latter also experienced an upward trend especially between 2012 and 2016. 2. The 31 provinces of mainland China were categorized into three clusters, and each cluster had its own characteristics of incidence time series. 3. The impact of health and hygiene situations on the prevention and control work of human brucellosis was still very limited and trivial (regression coefficient = -0.02). Therefore, it was plausible to presume that improving the personal average number of medical institutes and the proportion of rural medical expenditure might be helpful in preventing and controlling human brucellosis. Conclusions: The epidemic status of human brucellosis has changed in both spatial and temporal dimensions in recent years in mainland China. Apart from traditional control measures, more attention should be paid to the improvement of medical healthcare especially in rural areas in the hope of enhancing the control effect. [ABSTRACT FROM AUTHOR]

The development of CAAC began in the early days of 1949. From a comparatively less popular means of transport to the world's second largest by volume, this means of transport has undergone major and minor changes in the last 70 years. It is not known whether there are significant laws in the process of development. For this reason, we analyze the statistical indicators of the development of civil aviation transport and select representative indicators, namely, the total turnover of transport, the number of routes, the number of aircraft, the number of transport aircraft, and the number of domestic city connections. At the same time, the life cycle theory is introduced, and the typical growth curve model is used to fit the data. It is found that the evolution life cycle of civil aviation in China can be divided into three stages: the first life cycle stage from 1950 to 1981, the second from 1982 to 2003, and the third from 2004 to 2017. Each life cycle follows the growth characteristics of occurrence, growth and maturity, and each life cycle has a time range of approximately 30 years. At present, China's civil aviation industry is in the period of rapid growth in the third life cycle. This industry is expected to reach maturity in approximately 2026 and then to begin to grow slowly. Relevant departments can adopt corresponding development strategies to guide the smooth development of civil aviation in accordance with the growth law of the development and evolution life cycle of civil aviation in China. [ABSTRACT FROM AUTHOR]

The analysis of traffic collisions is essential for urban safety and the sustainable development of the urban environment. Reducing the road traffic injuries and the financial losses caused by collisions is the most important goal of traffic management. In addition, traffic collisions are a major cause of traffic congestion, which is a serious issue that affects everyone in the society. Therefore, traffic collision analysis is essential for all parties, including drivers, pedestrians, and traffic officers, to understand the road risks at a finer spatio-temporal scale. However, traffic collisions in the urban context are dynamic and complex. Thus, it is important to detect how the collision hotspots evolve over time through spatio-temporal clustering analysis. In addition, traffic collisions are not isolated events in space. The characteristics of the traffic collisions and their surrounding locations also present an influence of the clusters. This work tries to explore the spatio-temporal clustering patterns of traffic collisions by combining a set of network-constrained methods. These methods were tested using the traffic collision data in Jianghan District of Wuhan, China. The results demonstrated that these methods offer different perspectives of the spatio-temporal clustering patterns. The weighted network kernel density estimation provides an intuitive way to incorporate attribute information. The network cross K-function shows that there are varying clustering tendencies between traffic collisions and different types of POIs. The proposed network differential Local Moran’s I and network local indicators of mobility association provide straightforward and quantitative measures of the hotspot changes. This case study shows that these methods could help researchers, practitioners, and policy-makers to better understand the spatio-temporal clustering patterns of traffic collisions. [ABSTRACT FROM AUTHOR]

Lane-changing (LC) behavior is investigated on Chinese freeways, where the driving circumstances are relatively aggressive. Three data sets were collected from urban expressways and an intercity highway in the form of traffic videos. Different aspects of LC behaviors are analyzed, i.e., the LC rate, motivation, target lane choice and impact on traffic. The results suggest that LC is a transient behavior that randomly occurs with high frequency, which is the main feature of aggressive driving. Several LC patterns and the combination effect of ramps, fast lanes and various vehicle types are presented. The influence of LC on local traffic endures for approximately 15 to 30 s, which rapidly increases and slowly declines. LC behavior will increase the risk of high-speed car-following. All results are obtained from the empirical data; they will be useful for traffic management and traffic modeling. [ABSTRACT FROM AUTHOR]

Road and foliar dust samples from four land-use districts of Panzhihua City, a famous V-Ti magnetite production area of China, were collected to investigate the sources and distribution characteristics of 9 heavy metals (V, Pb, Cd, Cu, Zn, Ni, Cr, Fe, and Mn). The results suggest that foliar samples had smaller particle size and higher heavy metal contents than road dusts. The contamination assessments of heavy metals were as follows: Pb and V (significant enrichment) > Zn, Ni, Cr, Fe, and Mn (moderate enrichment) > Cd and Ni (minimal enrichment). Statistical analyses showed Pb, as the primary pollution element, originated from waste incineration and lead-fuel combustion. The sources of Zn, Ni, Cr, Fe, V, and Mn were fugitive dust and traffic activities. Potential origins of Cu were corrosion of alloys used in vehicle components, vehicle covers, or other metallic surfaces and materials. The sources of Cd were different from any other heavy metals. Traffic and industrial activities were the main anthropogenic origins of heavy metals in dusts of Panzhihua, and more attention should be paid to heavy metal pollution in agricultural area. [ABSTRACT FROM AUTHOR]

Objectives: Road traffic crashes that involve very high numbers of fatalities and injuries arouse public concern wherever they occur. In China, there are two categories of such crashes: a crash that results in 10–30 fatalities, 50–100 serious injuries or a total cost of 50–100 million RMB ($US8-16m) is a “serious road traffic crash” (SRTC), while a crash that is even more severe or costly is a “particularly serious road traffic crash” (PSRTC). The aim of this study is to identify the main factors affecting different types of these crashes (single-vehicle, head-on, rear-end and side impact) with the ultimate goal of informing prevention activities and policies. Methods: Detailed descriptions of the SRTCs and PSRTCs that occurred from 2007 to 2014 were collected from the database “In-depth Investigation and Analysis System for Major Road Traffic Crashes” (IIASMRTC), which is maintained by the Traffic Management Research Institute of the Ministry of Public Security of China (TMRI). 18 main risk factors, which were categorized into four areas (participant, vehicle, road and environment-related) were chosen as potential independent variables for the multinomial logistic regression analysis. Comparisons were made among the single-vehicle, head-on, rear-end and side impact crashes in terms of factors affecting crash occurrence. Findings: Five risk factors were significant for the six multinomial logistic regression models, which were location, vertical alignment, roadside safety rating, driver distraction and overloading of cargo. It was indicated that intersections were more likely to have side impact SRTCs and PSRTCs, especially with poor visibility at night. Overloaded freight vehicles were more likely to be involved in a rear-end crash than other freight vehicles. Driver distraction is an important risk factor for head-on crashes, while vertical alignment and roadside safety rating are positively associated with single-vehicle crashes. Conclusion: Based on the findings, promising measures were proposed to prevent each type of SRTC and PSRTC, which governmental or regulatory agencies could employ to plan strategies to reduce SRTCs and PSRTCs and support lifesaving policies. [ABSTRACT FROM AUTHOR]

Background: Data from the Chinese police service suggest substantial reductions in road traffic injuries since 2002, but critics have questioned the accuracy of those data, especially considering conflicting data reported by the health department. Methods: To address the gap between police and health department data and to determine which may be more accurate, we conducted a simulation study based on the modified Smeed equation, which delineates a non-linear relation between road traffic mortality and the level of motorization in a country or region. Our goal was to simulate trends in road traffic mortality in China and compare performances in road traffic safety management between China and 13 other countries. Results: Chinese police data indicate a peak in road traffic mortalities in 2002 and a significant and a gradual decrease in population-based road traffic mortality since 2002. Health department data show the road traffic mortality peaked in 2012. In addition, police data suggest China’s road traffic mortality peaked at a much lower motorization level (0.061 motor vehicles per person) in 2002, followed by a reduction in mortality to a level comparable to that of developed countries. Simulation results based on health department data suggest high road traffic mortality, with a mortality peak in 2012 at a moderate motorization level (0.174 motor vehicles per person). Comparisons to the other 13 countries suggest the health data from China may be more valid than the police data. Conclusion: Our simulation data indicate China is still at a stage of high road traffic mortality, as suggested by health data, rather than a stage of low road traffic mortality, as suggested by police data. More efforts are needed to integrate safety into road design, improve road traffic management, improve data quality, and alter unsafe behaviors of pedestrians, drivers and passengers in China. [ABSTRACT FROM AUTHOR]