Search

In this paper, we study the knapsack problem with conflict pair constraints. After a thorough literature survey on the topic, our study focuses on the special case of bipartite conflict graphs. For complete bipartite (multipartite) conflict graphs, the problem is shown to be NP-hard but solvable in pseudo-polynomial time, and it admits an FPTAS. Extensions of these results to more general classes of graphs are also presented. Further, a class of integer programming models for the general knapsack problem with conflict pair constraints is presented, which generalizes and unifies the existing formulations. The strength of the LP relaxations of these formulations is analyzed, and we discuss different ways to tighten them. Experimental comparisons of these models are also presented to assess their relative strengths. This analysis disclosed various strong and weak points of different formulations of the problem and their relationships to different types of problem data. This information can be used in designing special purpose algorithms for KPCC involving a learning component. [ABSTRACT FROM AUTHOR]

As a classical combinatorial optimization problem, the traveling salesman problem (TSP) has been extensively investigated in the fields of Artificial Intelligence and Operations Research. Due to being NP-complete, it is still rather challenging to solve both effectively and efficiently. Because of its high theoretical significance and wide practical applications, great effort has been undertaken to solve it from the point of view of intelligent search. In this paper, we propose a two-stage probe-based search optimization algorithm for solving both symmetric and asymmetric TSPs through the stages of route development and a self-escape mechanism. Specifically, in the first stage, a reasonable proportion threshold filter of potential basis probes or partial routes is set up at each step during the complete route development process. In this way, the poor basis probes with longer routes are filtered out automatically. Moreover, four local augmentation operators are further employed to improve these potential basis probes at each step. In the second stage, a self-escape mechanism or operation is further implemented on the obtained complete routes to prevent the probe-based search from being trapped in a locally optimal solution. The experimental results on a collection of benchmark TSP datasets demonstrate that our proposed algorithm is more effective than other state-of-the-art optimization algorithms. In fact, it achieves the best-known TSP benchmark solutions in many datasets, while, in certain cases, it even generates solutions that are better than the best-known TSP benchmark solutions. [ABSTRACT FROM AUTHOR]

The mathematical side of applied problems in multiple subject areas (biology, pattern recognition, etc.) is reduced to the problem of discrete optimization in the following mathematical method. We were provided a network and graphs in its leaves, for which we needed to find a rearrangement of graphs by non-leaf nodes, in which the given functional reached its minimum. Such a problem, even in the simplest case, is NP-hard, which means unavoidable restrictions on the network, on graphs, or on the functional. In this publication, this problem is addressed in the case of all graphs being so-called "structures", meaning directed-loaded graphs consisting of paths and cycles, and the functional as the sum (over all edges in the network) of distances between structures at the endpoints of every edge. The distance itself is equal to the minimal length of sequence from the fixed list of operations, the composition of which transforms the structure at one endpoint of the edge into the structure at its other endpoint. The list of operations (and their costs) on such a graph is fixed. Under these conditions, the given discrete optimization problem is called the reconstruction problem. This paper presents novel algorithms for solving the reconstruction problem, along with full proofs of their low error and low polynomial complexity. For example, for the network, the problem is solved with a zero error algorithm that has a linear polynomial computational complexity; and for the tree the problem is solved using an algorithm with a multiplicative error of at most two, which has a second order polynomial computational complexity. [ABSTRACT FROM AUTHOR]

Outlier detection is of great significance in the domain of data mining. Its task is to find those target points that are not identical to most of the object generation mechanisms. The existing algorithms are mainly divided into density-based algorithms and distance-based algorithms. However, both approaches have some drawbacks. The former struggles to handle low-density modes, while the latter cannot detect local outliers. Moreover, the outlier detection algorithm is very sensitive to parameter settings. This paper proposes a new two-parameter outlier detection (TPOD) algorithm. The method proposed in this paper does not need to manually define the number of neighbors, and the introduction of relative distance can also solve the problem of low density and further accurately detect outliers. This is a combinatorial optimization problem. Firstly, the number of natural neighbors is iteratively calculated, and then the local density of the target object is calculated by adaptive kernel density estimation. Secondly, the relative distance of the target points is computed through natural neighbors. Finally, these two parameters are combined to obtain the outlier factor. This eliminates the influence of parameters that require users to determine the number of outliers themselves, namely, the top-n effect. Two synthetic datasets and 17 real datasets were used to test the effectiveness of this method; a comparison with another five algorithms is also provided. The AUC value and F1 score on multiple datasets are higher than other algorithms, indicating that outliers can be found accurately, which proves that the algorithm is effective. [ABSTRACT FROM AUTHOR]

In the scenario of device-free localization under multiple effects, the accuracy of localization based on compressed sensing theory is severely affected. Most existing localization techniques directly ignore multiple path effects. However, it is not practical to ignore the multiple path effect due to its high signal strength, which can provide localization information. In this paper, we formulate the sensing matrix optimization problem in compressed sensing for device-free localization scenarios based on multiple reflections. To solve this problem, we model it as a constrained combinatorial optimization problem and propose a hybrid meta-heuristic algorithm. First, smart reflection surfaces and virtual node models are used to construct the desired communication links. Second, we iteratively improve the properties of the measurement matrix by using K-means clustering to obtain reasonable thresholds, and use a meta-heuristic algorithm to optimize the sensing matrix. Finally, the simulation results show that the proposed method efficiently optimizes the sensing matrix and achieves fast and high-precision localization while conserving communication resources. [ABSTRACT FROM AUTHOR]

In recent years, metaheuristic methods have shown remarkable efficacy in resolving complex combinatorial challenges across a broad spectrum of fields. Nevertheless, the escalating complexity of these problems necessitates the continuous development of innovative techniques to enhance the performance and reliability of these methods. This paper aims to contribute to this endeavor by examining the impact of solution initialization methods on the performance of a hybrid algorithm applied to the set union knapsack problem (SUKP). Three distinct solution initialization methods, random, greedy, and weighted, have been proposed and evaluated. These have been integrated within a sine cosine algorithm employing k-means as a binarization procedure. Through testing on medium- and large-sized SUKP instances, the study reveals that the solution initialization strategy influences the algorithm's performance, with the weighted method consistently outperforming the other two. Additionally, the obtained results were benchmarked against various metaheuristics that have previously solved SUKP, showing favorable performance in this comparison. [ABSTRACT FROM AUTHOR]

Hybridized algorithms are commonly employed to improve the performance of any existing method. However, an optimal learning algorithm composed of evolutionary and swarm intelligence can radically improve the quality of the final neuron states and has not received creative attention yet. Considering this issue, this paper presents a novel metaheuristics algorithm combined with several objectives—introduced as the Hybrid Election Algorithm (HEA)—with great results in solving optimization and combinatorial problems over a binary search space. The core and underpinning ideas of this proposed HEA are inspired by socio-political phenomena, consisting of creative and powerful mechanisms to achieve the optimal result. A non-systematic logical structure can find a better phenomenon in the study of logic programming. In this regard, a non-systematic structure known as Random k Satisfiability (RANkSAT) with higher-order is hosted here to overcome the interpretability and dissimilarity compared to a systematic, logical structure in a Discrete Hopfield Neural Network (DHNN). The novelty of this study is to introduce a new multi-objective Hybrid Election Algorithm that achieves the highest fitness value and can boost the storage capacity of DHNN along with a diversified logical structure embedded with RANkSAT representation. To attain such goals, the proposed algorithm tested four different types of algorithms, such as evolutionary types (Genetic Algorithm (GA)), swarm intelligence types (Artificial Bee Colony algorithm), population-based (traditional Election Algorithm (EA)) and the Exhaustive Search (ES) model. To check the performance of the proposed HEA model, several performance metrics, such as training–testing, energy, similarity analysis and statistical analysis, such as the Friedman test with convergence analysis, have been examined and analyzed. Based on the experimental and statistical results, the proposed HEA model outperformed all the mentioned four models in this research. [ABSTRACT FROM AUTHOR]

The dynamic vehicle routing problem (DVRP) is a variant of the Vehicle Routing Problem (VRP) in which customers appear dynamically. The objective is to determine a set of routes that minimizes the total travel distance. In this paper, we propose a monarch butterfly optimization (MBO) algorithm to solve DVRPs, utilizing a greedy strategy. Both migration operation and the butterfly adjusting operator only accept the offspring of butterfly individuals that have better fitness than their parents. To improve performance, a later perturbation procedure is implemented, to maintain a balance between global diversification and local intensification. The computational results indicate that the proposed technique outperforms the existing approaches in the literature for average performance by at least 9.38%. In addition, 12 new best solutions were found. This shows that this proposed technique consistently produces high-quality solutions and outperforms other published heuristics for the DVRP. [ABSTRACT FROM AUTHOR]

This paper comprehensively reviews the spiral dynamics optimization (SDO) algorithm and investigates its characteristics. SDO algorithm is one of the most straightforward physics-based optimization algorithms and is successfully applied in various broad fields. This paper describes the recent advances of the SDO algorithm, including its adaptive, improved, and hybrid approaches. The growth of the SDO algorithm and its application in various areas, theoretical analysis, and comparison with its preceding and other algorithms are also described in detail. A detailed description of different spiral paths, their characteristics, and the application of these spiral approaches in developing and improving other optimization algorithms are comprehensively presented. The review concludes the current works on the SDO algorithm, highlighting its shortcomings and suggesting possible future research perspectives. [ABSTRACT FROM AUTHOR]

The Cockroach Swarm Optimization (CSO) algorithm is inspired by cockroach social behavior. It is a simple and efficient meta-heuristic algorithm and has been applied to solve global optimization problems successfully. The original CSO algorithm and its variants operate mainly in continuous search space and cannot solve binary-coded optimization problems directly. Many optimization problems have their decision variables in binary. Binary Cockroach Swarm Optimization (BCSO) is proposed in this paper to tackle such problems and was evaluated on the popular Traveling Salesman Problem (TSP), which is considered to be an NP-hard Combinatorial Optimization Problem (COP). A transfer function was employed to map a continuous search space CSO to binary search space. The performance of the proposed algorithm was tested firstly on benchmark functions through simulation studies and compared with the performance of existing binary particle swarm optimization and continuous space versions of CSO. The proposed BCSO was adapted to TSP and applied to a set of benchmark instances of symmetric TSP from the TSP library. The results of the proposed Binary Cockroach Swarm Optimization (BCSO) algorithm on TSP were compared to other meta-heuristic algorithms. [ABSTRACT FROM AUTHOR]

Process planning is a typical combinatorial optimization problem. When the scale of the problem increases, combinatorial explosion occurs, which makes it difficult for traditional precise algorithms to solve the problem. A hybrid particle swarm optimization (HPSO) algorithm is proposed in this paper to solve problems of process planning. A hierarchical coding method including operation layer, machine layer and logic layer is designed in this algorithm. Each layer of coding corresponds to the decision of a sub-problem of process planning. Several genetic operators of the genetic algorithm are designed to replace the update formula of particle position and velocity in the particle swarm optimization algorithm. The results of the benchmark example in case study show that the algorithm proposed in this paper has better performance. [ABSTRACT FROM AUTHOR]

The integration of different energy resources from traditional power systems presents new challenges for real-time implementation and operation. In the last decade, a way has been sought to optimize the operation of small microgrids (SMGs) that have a great variety of energy sources (PV (photovoltaic) prosumers, Genset CHP (combined heat and power), etc.) with uncertainty in energy production that results in different market prices. For this reason, metaheuristic methods have been used to optimize the decision-making process for multiple players in local and external markets. Players in this network include nine agents: three consumers, three prosumers (consumers with PV capabilities), and three CHP generators. This article deploys metaheuristic algorithms with the objective of maximizing power market transactions and clearing price. Since metaheuristic optimization algorithms do not guarantee global optima, an exhaustive search is deployed to find global optima points. The exhaustive search algorithm is implemented using a parallel computing architecture to reach feasible results in a short amount of time. The global optimal result is used as an indicator to evaluate the performance of the different metaheuristic algorithms. The paper presents results, discussion, comparison, and recommendations regarding the proposed set of algorithms and performance tests. [ABSTRACT FROM AUTHOR]

The graph bandwidth problem, where one looks for a labeling of graph vertices that gives the minimum difference between the labels over all edges, is a classical NP-hard problem that has drawn a lot of attention in recent decades. In this paper, we focus on the so-called Embed and Project Algorithm (EPA) introduced by Blum et al. in 2000, which in the main part has to solve a semidefinite programming relaxation with exponentially many linear constraints. We present several theoretical properties of this special semidefinite programming problem (SDP) and a cutting-plane-like algorithm to solve it, which works very efficiently in combination with interior-point methods or with the bundle method. Extensive numerical results demonstrate that this algorithm, which has only been studied theoretically so far, in practice gives very good labeling for graphs with n ≤ 1000 . [ABSTRACT FROM AUTHOR]

In an electrical safe microenvironment, all kinds of electrical appliances can be operated safely to ensure the safety of life and property. The significance of safety hazard factors detection is to detect safety hazards in advance, to remind the administrators to exclude risk, to reduce the unnecessary loss, and to ensure that the electrical operation is healthy and orderly before the occurrence of accidents. In this paper, batteries are selected as the primary research subject of safety detection because batteries are used more and more in the Internet of Things (IOT), and they often cause fire in the process of discharging and charging. The existing algorithms need to be embedded into the specialized sensor for each important electrical appliance. However, they are limited by the actual deployment, so it is extremely difficult to spread widely. According to the opinions above, an improved load disaggregation algorithm based on dictionary learning and sparse coding with optimal dictionary matrix period is proposed to detect potential safety hazards of battery loads. For safety-related electrical applications, doing so can increase interpretability. Through experiments, we test this algorithm on the REDD dataset, and compare it with the baseline algorithms (combinatorial optimization, factorial hidden Markov model, basic discriminative dictionary sparse coding algorithm) to achieve a degree of trust. The Mean Absolute Error (MAE) value is 8.26, which drops by 70%. The Root Mean Square Error (RMSE) value is 97.75, which is also better than those baseline algorithms. [ABSTRACT FROM AUTHOR]

There are various situations in which real-world problems can be modeled and solved as minimum flow problems. Sometimes, in these situations, minor data changes may occur, leading to corresponding changes of the networks in which the practical problems are modeled as flow problems, such as slight variations in capacity or lower bound. For instance, the capacity or the lower bound of an arc may increase or decrease in time, leaving one with no other choice than finding the new minimum network flow. Given both the various ways in which the networks can be changed and the high frequency of these changes, it is desirable to find as fast a computation method for minimum flow as possible. This paper is focused on the cases that concern increasing and decreasing the capacity or the lower bound of an arc. For these cases, both the minimum flow algorithms and the dynamic minimum flow algorithms that are already known are inefficient. Our incremental algorithms for determining minimum flow in the modified network are more efficient than both the above-mentioned types of algorithms. The proposed method starts from the initial network minimum flow and solves the minimum flow problem in a significantly faster way than recalculating the new network minimum flow starting from scratch. [ABSTRACT FROM AUTHOR]

In this paper, we present a hybrid genetic-hierarchical algorithm for the solution of the quadratic assignment problem. The main distinguishing aspect of the proposed algorithm is that this is an innovative hybrid genetic algorithm with the original, hierarchical architecture. In particular, the genetic algorithm is combined with the so-called hierarchical (self-similar) iterated tabu search algorithm, which serves as a powerful local optimizer (local improvement algorithm) of the offspring solutions produced by the crossover operator of the genetic algorithm. The results of the conducted computational experiments demonstrate the promising performance and competitiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

The unmanned aerial vehicle (UAV) has drawn increasing attention in recent years, especially in executing tasks such as natural disaster rescue and detection, and battlefield cooperative operations. Task assignment and path planning for multiple UAVs in the above scenarios are essential for successful mission execution. But, effectively balancing tasks to better excavate the potential of UAVs remains a challenge, as well as efficiently generating feasible solutions from the current one in constrained explosive solution spaces with the increase in the scale of optimization problems. This paper proposes an efficient approach for task assignment and path planning with the objective of balancing the tasks among UAVs and achieving satisfactory temporal resolutions. To be specific, we add virtual nodes according to the number of UAVs to the original model of the vehicle routing problem (VRP), thus make it easier to form a solution suitable for heuristic algorithms. Besides, the concept of the universal distance matrix is proposed to transform the temporal constraints to spatial constraints and simplify the programming model. Then, a Swap-and-Judge Simulated Annealing (SJSA) algorithm is therefore proposed to improve the efficiency of generating feasible neighboring solutions. Extensive experimental and comparative studies on different scenarios demonstrate the efficiency of the proposed algorithm compared with the exact algorithm and meta-heuristic algorithms. The results also inspire us about the characteristics of a population-based algorithm in solving combinatorial discrete optimization problems. [ABSTRACT FROM AUTHOR]

In this paper, we study the problem of developing new combinatorial generation algorithms. The main purpose of our research is to derive and improve general methods for developing combinatorial generation algorithms. We present basic general methods for solving this task and consider one of these methods, which is based on AND/OR trees. This method is extended by using the mathematical apparatus of the theory of generating functions since it is one of the basic approaches in combinatorics (we propose to use the method of compositae for obtaining explicit expression of the coefficients of generating functions). As a result, we also apply this method and develop new ranking and unranking algorithms for the following combinatorial sets: permutations, permutations with ascents, combinations, Dyck paths with return steps, labeled Dyck paths with ascents on return steps. For each of them, we construct an AND/OR tree structure, find a bijection between the elements of the combinatorial set and the set of variants of the AND/OR tree, and develop algorithms for ranking and unranking the variants of the AND/OR tree. [ABSTRACT FROM AUTHOR]

Zero-one quadratic programming is a classical combinatorial optimization problem that has many real-world applications. However, it is well known that zero-one quadratic programming is non-deterministic polynomial-hard (NP-hard) in general. On one hand, the exact solution algorithms that can guarantee the global optimum are very time consuming. And on the other hand, the heuristic algorithms that generate the solution quickly can only provide local optimum. Due to this reason, identifying polynomially solvable subclasses of zero-one quadratic programming problems and their corresponding algorithms is a promising way to not only compromise these two sides but also offer theoretical insight into the complicated nature of the problem. By combining the basic algorithm and dynamic programming method, we propose an effective algorithm in this paper to solve the general linearly constrained zero-one quadratic programming problem with a k-diagonal matrix. In our algorithm, the value of k is changeable that covers different subclasses of the problem. The theoretical analysis and experimental results reveal that our proposed algorithm is reasonably effective and efficient. In addition, the placement of the phasor measurement units problem in the power system is adopted as an example to illustrate the potential real-world applications of this algorithm. [ABSTRACT FROM AUTHOR]