Search

In this study, tantalum network nanoparticles are prepared from a Ta 2 O 5 + k Mg system via a liquid magnesium-controlled combustion reaction. Super-stoichiometric amounts of magnesium are used in the preparation of a reaction mixture to produce a liquid magnesium pool capable of lowering the combustion temperature and leading to the formation of Ta network structures. The heat transfer kinetics from the hot reaction zone of 'cold' Mg particles is determined using heat transfer-coupled fluid dynamics simulation software. The formation of network structures is characterized through SEM, TEM, XRD, and BET analysis techniques. The mechanism of network formation is explained based on solid particle collisions in liquid media. Our method is able to produce Ta network structures in which the size of individual particles ranges between 50 and 700 nm. [ABSTRACT FROM AUTHOR]

Abstract The adiabatic temperatures and equilibrium phases in the FeTiO 3 - α Mg-C(B, Si)- k NaCl system (where α = 0.2–15, k = 0–3) were analyzed to predict the formation of fine powders of titanium compounds from natural ilmenite sand. From the parametric study, the critical variables were identified and optimized for the synthesis of FeTi, TiC, TiB 2 , and TiFeSi 2 under a combustion regime. The experimentally measured temperatures were in good agreement with those predicted from thermochemical calculations in the 900–1800 °C range. The purified products were characterized using X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. The fine powders of titanium compounds were mainly single phase with a purity of at least 95 wt%. Considering the various stages of the synthetic process, a mechanism is proposed to explain how the process of ilmenite recovery occurred. Graphical abstract Image Highlights • Natural ilmenite was used as a precursor for synthesizing Ti compounds. • Combustion temperatures and phases were determined in FeTiO 3 -αMg-C(B, Si)- k NaCl system. • The effect of Mg and NaCl concentration on the combustion temperature was revealed. • The ilmenite was converted into FeTi, TiC, TiB 2, and FeTiSi 2 fine powders. • A reduction pathway in the synthesis of Ti compounds was proposed. [ABSTRACT FROM AUTHOR]

Abstract We developed an attractive combustion approach for synthesizing uniformly shaped AlN dendritic crystals by combustion of Al + 0.1AlF 3 + k Al 2 O 3 powder mixtures in a nitrogen atmosphere. The combustion temperature measured for various k values was between 1650 and 1750 °C and the micro-droplets of Al formed in the beginning stages of the process were enveloped by the solid layers of Al 2 O 3 , and the subsequent multipoint nucleation and crystallization produced morphologically and size uniform dendritic crystals. We proposed a theoretical model for calculating the thickness and the number of Al 2 O 3 layers around of Al microdroplets at known concentration of Al 2 O 3. Depending on the concentration of Al 2 O 3 , these structures were simple stars with six points and stellar dendrites with multiple petals. [ABSTRACT FROM AUTHOR]

In this study, a single-step combustion process for the synthesis 1-D, 2-D, and 3-D micro and nanostructures of AlN was developed. The structures were grown by combustion of Al+ k AlF 3 (or ZnF 2 )+ m NH 4 Cl reaction mixture under 4.0 MPa nitrogen atmosphere. Based on experimental data, the growth conditions, morphology, and composition, optical, and thermal properties of AlN micro and nanostructures were determined. The formation of structures was associated with the combustion temperature, liquid and gas-phase reactions, and the type of additives used in the experiments. The new insight, we gleaned from this study may help in the selective growth of AlN micro and nanostructures of different morphology, enhancing their functionality. [ABSTRACT FROM AUTHOR]

In this study, we examined the effect of potassium perchlorate (KClO 4 ) and magnesium hydroxide (Mg(OH) 2 ) additives on the combustion behavior of a ZrO 2  + 2Mg mixture to produce a fine powder of zirconium metal. The results of thermodynamic analysis and experiments imply that nearly 0.04 mol of KClO 4 is needed to initiate a combustion reaction in the ZrO 2  + 2Mg system. As the amount of KClO 4 increases from 0.04 to 0.1 mol, the combustion temperature increases from 1250 to 1850 °C. This results in formation of fine zirconium powder with a typical particle size of less than 5 µm, and with 1.4–2.2 wt% residual oxygen. Subsequent reduction of particle size to 100–500 nm, and oxygen content to <1.0 wt% was achieved by adding Mg(OH) 2 . The as-prepared Zr powder was mixed with nitrocellulose and printed onto 10–100 µm thin-layers to study their burning stability. The wave propagation in a thin layer was on the order of 0.35–30 cm/s, which is suitable for applications requiring localized power generation. [ABSTRACT FROM AUTHOR]

The exothermic reduction of oxides mixture (MoO 3 +2SiO 2 ) by magnesium in NaF melt enables the synthesis of nanocrystalline MoSi 2 powders in near-quantitative yields. The combustion wave with temperature of about 1000–1200 °C was recorded in highly diluted by NaF starting mixtures. The by-products of combustion reaction (NaF and MgO) were subsequently removed by leaching with acid and washing with water. The as-prepared MoSi 2 nanopowder composed of spherical and dendritic shape particles was consolidated using the spark plasma sintering method at 1200–1500 °C and 50 MPa for 10 min. The result was dense compacts (98.6% theoretical density) possessing submicron grains and exhibiting hardness of 8.74–12.92 GPa. [ABSTRACT FROM AUTHOR]

In this study, a combustion process for a TiO 2 + 0.12Al + (2.5 + 6 k )Mg + 0.021V 2 O 5 + k MgCl 2 ·6H 2 O mixture was studied to fabricate Ti-6Al-4V alloy spherical particles. From the temperature-time profiles, the average value of the synthesis temperature was estimated to be 1650 ± 20 °C. Based on FESEM observations, spherical shape particles were obtained when 0.05–0.1 mol MgCl 2 ·6H 2 O was added to the initial reaction mixture. Therefore, spherical alloy particles were achieved by consecutive processes of cooling and acid purification of the burned down sample. According to laser particle size analysis, the average diameter of the spheres was between 5 and 25 μm. A selective laser melting process was applied to build dense Ti-6Al-4V alloy samples. The tensile properties and the microhardness were evaluated and compared to those characteristics of a reference sample prepared from commercial Ti-6Al-4V alloy spherical powder. [ABSTRACT FROM AUTHOR]

This study deals with combustion behavior of B 2 O 3 /Mg/NH 4 Cl/C complex systems for the synthesis of amorphous boron (B), boron carbide (B 4 C), and boron nitride (BN) nanostructures. The raw mixtures used in the experiments were prepared on the base of a B 2 O 3 –Mg precursor mixture, which is sufficiently exothermic to maintain a self-propagating regime of the combustion reaction. Thermodynamic analysis of the combustion temperatures and experimental validation indicate that the 1000–1500 °C temperature range is very effective for synthesizing the nanostructures of B, B 4 C, and BN. It was found that B-containing functional nanostructures are mainly spherical nanoparticles (B) or nanosheets (B 4 C, BN). The phase composition and microstructural characteristics of the final products were evaluated based on the combustion temperature and solid/liquid phase changes. [ABSTRACT FROM AUTHOR]

A melt-assisted solid flame synthesis approach was applied to synthesize boron nanoparticles in argon gas and air atmospheres. For this purpose, we investigated the characteristics of a thermally induced combustion wave in B 2 O 3 + α Mg mixtures ( α = 1.0–1.5 mol) in argon and air atmospheres. Utilizing stoichiometrically insufficient amounts of magnesium ensured that a large portion of molten B 2 O 3 remained in the sample, which reduced the combustion parameters and favored the formation of boron nanoparticles. Under these conditions the combustion temperature and burning velocity were controlled in the range of 1300–1580 °C and 0.065–0.18 cm/s, respectively, and boron nanoparticles in a ∼20–200 nm size range were obtained. The characteristics of boron nanoparticles (morphology, purity, specific surface area, oxidation activity, etc.) were analyzed and a reaction pathway leading to boron nanoparticles synthesis was proposed. [ABSTRACT FROM AUTHOR]

The synthesis of AlN nanoparticles in non-isothermal high-temperature conditions was developed. The process involved Al 2 O 3 –Mg–NH 4 Cl mixtures preparation and combustion in nitrogen atmosphere. Temperature profiles in the combustion waves were recorded by thermocouples, and the values of combustion temperature and wave velocity were determined from the recorded profiles. The existence of two independed combustion regimes with maximum temperatures of about 850 °C and 1400–1600 °C were revealed based on concentrations of NH 4 Cl. AlN nanocrystals were obtained and investigated by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller surface area. AlN nanocrystals prepared under non-isothermal combustion process were comprised well distributed multi-faceted particles with an average size of 50–200 nm. The chemical reactions in the combustion wave were discussed and a possible thermochemical pathway for the synthesis of AlN nanoparticles was proposed. [ABSTRACT FROM AUTHOR]

The present study demonstrates the synthesis of fine hafnium (Hf) metal powders via a chemically activated combustion synthesis (CS) approach, which develops temperatures in the range of 1000–1600 °C. The current CS approach can be employed to obtain Hf powders with a single-crystalline hexagonal close-packed (hcp) structure in addition to high compositional uniformity and average particle sizes ranging from 0.05 to 2.0 μm. The mechanism of Hf particle formation can be understood by analyzing the process thermodynamics, including adiabatic temperatures and equilibrium reaction phases. In addition, analytical methods, including X-ray diffraction, SEM/TEM BET, FTIR, and oxygen analysis, were employed to characterize the synthesized Hf powders. Theoretical analysis was also conducted to predict the oxygen content according to Hf particle size. To the author's best knowledge, this work is the first known report demonstrating the preparation of hafnium micro- and nanopowders by the combustion synthesis method. • The combustion of HfO 2 +0.08KClO 4 + k Mg systems was studied for k = 2.7–7. • Synthesis temperatures ranging from 1570 to 1000 °C were recorded. • Hf powder with particle sizes of 0.05–2.0 μm and 0.8–2.0 wt% oxygen was obtained. • Deoxidation using a Ca/Mg alloy powder produced Hf metal with less than 0.1 wt% O 2. • A theoretical model, for predicting oxygen concentration in Hf particles is proposed. [ABSTRACT FROM AUTHOR]