Search

The demand for eco-products due to the exigency of friendly and environmental production could affect the employment of the firms. This paper tests whether product and process eco-innovations boost employment in Spain differentiating by the environmental goals (material and energy efficiency and environment responsiveness), by the level of qualification of the workers, and by the dirtiness of the industries. We apply a Green Harrison model, using the Technological Innovation Panel (PITEC) for Spain from 2008 to 2016. Results show a positive relationship between all types of product eco-innovations and employment, while the influence of process eco-innovations on employment depends on the environmental goals, the level of skills, and the industry. Specifically, distinguishing by industry there is a labour-saving effect in clean industries and a labour-friendly effect for low-skilled employment in dirty industries. [ABSTRACT FROM AUTHOR]

Effectively utilizing low-grade thermal energy is a promising approach to mitigating greenhouse gas emissions while reducing the burden on centralized power grids. Current thermoacoustic heat pumps and power generators face challenges such as high onset temperature differentials and low performance. This paper addresses these challenges by introducing a gas-liquid resonator into a thermoacoustic combined heat and power systems to recover low-grade thermal energy in residential buildings. Through Sage modeling and calculations, the internal characteristics of the proposed system and its output performance under different operating conditions are explored. At a heating temperature of 350 °C, the system can generate 6.4 kW of output thermal power, 0.9 kW of electricity, and overall exergy efficiency is 79.3 %. Combining neural network models with case studies conducted in Spain and Finland, the system can annually save 5.6 MWh and 20.7 MWh in fuel energy, reduce emissions of 1374 kg and 5180 kg of carbon dioxide, and save a total cost of €611 and €2324, respectively. Furthermore, comparisons with other emerging micro-CHP systems highlight the efficiency of the proposed system. These results indicate the high potential of thermoacoustic combined heat and power systems in recovering low-grade thermal energy and achieving energy savings and emission reductions. • Introducing an innovative thermoacoustic micro-CHP system. • Achieving an exergy efficiency of 79.3 % under standard operating conditions. • One system can annually reduce household CO 2 emissions by 5180 kg. • Ideal for households, balancing lower output levels for both heat and electricity. [ABSTRACT FROM AUTHOR]

This paper proposes the first application of a split-range control technique on a concentrating solar collector to improve an absorption plant production. Solar absorption plants have solar power availability in phase with cooling demand under design conditions. Thus, it is a powerful cooling technology in the context of renewable energy and energy efficiency. These plants need control systems to cope with solar irradiance intermittency, reject irradiation disturbances, manage fossil fuels backup systems and dump closed-loop thermal-hydraulic oscillations. In this work, control techniques are proposed and simulated in an absorption plant in Spain. The plant consists of a concentrating Fresnel solar collector connected to an absorption chiller. The objectives are to operate with 100% renewable solar energy and avoid safety defocus events while reducing temperature oscillations and control actuators effort. Firstly, the current available plant controllers are defined, then two modifications are proposed. The first modification is a split-range controller capable of manipulating both flow and defocus of the Fresnel collector, the second modification is a PI controller to substitute the original chiller on-off controller. The results compare, through validated models, the different control systems and indicate that using both proposed controllers reduces 94% of the sum of actuators effort and 43% of the integral of absolute set-point tracking error compared to the plant's factory pre-set controllers. The suggested controllers increase 66% of energy production and 63% of exergy production. Besides, the split-range technique can be extended to any concentrating solar collector control. [Display omitted] [ABSTRACT FROM AUTHOR]

This paper explores whether the changes in energy intensity in Spain have led to improvements in the energy consumption levels or to a backfire effect offsetting the expected decrease. Jevon's paradox or backfire effect happens when a rebound higher than 100% causes energy efficiency improvement to raise energy consumption. To test Jevon's paradox or the backfire effect caused by energy efficiency actions, a Logarithmic Mean Divisia Index I (LMDI-I) is used for the Spanish economy. The period under consideration ranges from 2000 to 2015, when three national action plans were implemented. The main methodological novelty of this paper consists on to block the economic activity effect in a second decomposition round to better explore the effect of energy efficiency on energy consumption. As a whole, our results do not support Jevon's paradox for the sectors analyzed. However, they do warn about a possible backfire effect in the industry, transport and service sectors. Major findings follow these same findings when the activity effect is blocked. • Backfire effect caused by energy intensity is explored. • Focus is on the Spanish case from 2000 to 2015. • Main methodological novelty is to block the economic activity in a LMDI approach. • Results do not support Jevon's paradox for the sectors analyzed. [ABSTRACT FROM AUTHOR]

• The paper has a focus on energy consumption habits and trends using statistical methods. • Occupants' behavior is monitored using smart metering system and awareness surveys. • The impact of a serious game on occupant's behavior is evaluated. The paper has a focus on energy consumption habits, trends and intervention strategies in residential buildings, mainly through the serious game approach with a combination of direct consumer feedback through smart metering. More than 150 homes in France and Spain have been involved in the research experiment and the consumption habits of approximately 50 homes were deeply analyzed. The applied methods, processes, results and findings of the monitoring data analysis are presented in the paper with two aims. First, consumption profiles and trends were determined for apartment homes with regard to heating, domestic hot water and electric consumption. Second, the impact of a serious game experiment was assessed comparing energy consumption, indoor air temperature and users' habits (based on questionnaires) before and after launching the experiment. [ABSTRACT FROM AUTHOR]

The operation of solar photovoltaic installations for many years may lead to problems such as reduced energy efficiency and aging of components. Under this framework, replacing certain components in the facility to extend the service life of the power plant is viewed, in some cases, as a feasible strategy. However, despite its enormous strategic interest for the solar PV industry, we find that revamping PV installations has been the focus of very few scientific publications, and even less so when it comes to analyzing real facilities. Thus, this paper performs a techno-economic analysis of three revamping strategies at a real PV power plant located in the south-east of Spain. The strategies consist of substituting, in each case, the PV modules, the inverter, and both components. The simulated results show that the highest production value by installed power is obtained when both the modules and the inverter are replaced. In the same vein, the economic analysis reveals this scenario as the most favorable in terms of profitability. Based on the results obtained, an interesting future line of research would be focused on the extension of the analysis at country level to study the joint impact of numerous revamping actions. • Techno-economic analysis of revamping projects of a real solar PV power plant. • Replacing modules and inverter emerges as the most feasible strategy. • Study's applicability extends to other revamping initiatives and geographical regions. • Economic outcomes allow the most cost-effective alternatives to be determined. • This research can contribute to efficient and sustainable energy planning. [ABSTRACT FROM AUTHOR]

• We present a novel integration for reducing CO 2 emissions in blast furnaces. • It combines top gas recycling, oxy-fuel regime, power to gas and biomass pyrolysis. • The integration was modelled using the extended operating line methodology. • The best performance was found for pyrolysis at 700 °C. • The CO 2 emissions were reduced by 58% (9.8 MJ/kg CO2 energy consumption) The paper introduces a novel approach for mitigating CO 2 emissions in blast furnaces by integrating top gas recycling, an oxy-fuel regime, power to gas, and biomass pyrolysis. Various case studies were conducted, involving the adjustment of pyrolysis temperatures (300 °C, 500 °C, 700 °C, and 900 °C) and varying the quantity of blast furnace gas directed to methanation for carbon recycling. Pinus radiata, abundant and cost-effective in Chile and Spain, was chosen as the biomass source. The integration was modeled using the extended operating line methodology and evaluated through 12 key performance indicators, such as flame temperature, coke consumption, CO 2 emissions, and specific primary energy consumption per unit of CO 2 avoided. Optimal performance was observed with pyrolysis at 700 °C and no blast furnace gas recycled through methanation. This configuration achieved a 58 % reduction in CO 2 emissions, with an energy consumption of 9.8 MJ/kg CO2 , and obviated the need for geological storage. Comparing this innovative proposal with other oxygen blast furnace approaches from the literature revealed a 13 percentage point improvement in CO 2 reduction over the second-best alternative. Additionally, the required electrolysis capacity, influencing capital expenditure, was 57 % lower, and energy consumption was reduced by 44 %. [ABSTRACT FROM AUTHOR]

This paper presents a model for optimizing the life cycle economic and environmental impacts of a hybrid renewable energy and battery storage system – as energy supply technologies (EST) for off-grid farms. Micro-hydropower and photovoltaics represent the primary renewable energy (RE) sources, with batteries and a diesel generator considered as possible back-up systems. A modified Non-dominated Sorting Genetic Algorithm II (NSGA-II) was developed and applied to a case study farm in Southern Spain and provided different EST solutions to optimize a design based on economic (life cycle costing or LCC) and environmental (life cycle assessment or LCA) constraints. The results highlighted that cases with a strong dependence on batteries could achieve minimum costs and lower impacts for climate change and energy resources (non-renewable fuels). In contrast, the optimal system for minimizing the consumption of material resources (metals/minerals) resulted in higher fuel use, which was up to 25% more expensive. The optimal EST solutions used up to 37% of the total energy generated; however, the results were sensitive to energy production-demand distributions. This methodology can help identify the most cost-effective solutions with the lower environmental impacts for decarbonizing the agricultural sector. [Display omitted] [ABSTRACT FROM AUTHOR]

Countries worldwide have set national targets for energy production from renewable sources. Yet, while many governments are committed to more renewable energy, obtaining permission to site installations is becoming increasingly difficult. With large tracts of land for renewables becoming intensely contested, countries seeking to meet their renewables targets are directing attention also towards tapping the potential in the urban environment through smaller-scale facilities. These entail other challenges, and countries are seeking ways to overcome them. The focus of this paper is on one, still evolving, type of renewable energy technology: small-scale wind turbines (SSWT). The paper presents a review of current but limited international academic knowledge on the land-regulation aspects of siting SSWT in countries that already have experience with such installations, including the USA, UK and New Zealand. The paper also reports on a comparative analysis of the land-related regulations and practices in two selected Mediterranean jurisdictions – Spain (Catalonia) and Israel. The approach of this study is exploratory, relying on analysis of legal and policy documents complemented by field work through in-depth interviews with key-stakeholders in both jurisdictions. The overall aim of this study is to examine different approaches of planning systems to new technologies. The findings show that despite their shared objective factors, the two jurisdictions have adopted almost opposite approach to regulating SSWTs. The findings, therefore, suggest that the incorporation of an unknown technology within the city requires a change of mindset both among the officials and among the city residents. A more effective regulatory framework might therefore entails a combination of strategic thinking, an experimental approach and the capacity to learn from cross-national comparative experiences. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to review the literature focused on the energy/electricity-growth nexus, highlighting how the focus has shifted from aggregated energy/electricity consumption towards specific energy sources. Moreover, it aims to shed light on the relationships between different energy/electricity sources and economic growth. Empirically, the paper focuses on the analysis of interactions between electricity generation in Spain under both the Special Regime ( SR ) and the Ordinary Regime ( OR ), and their relationship with economic activity. Data for Spain is studied for a time span from January 2003 to January 2016. The Toda-Yamamoto causality test is carried out to check for causality relationships. Additionally, both short- and long-run effects are assessed by using the ARDL bounds test approach. Overall, the results reveal high internal consistency when comparing the ARDL results with the causality analysis. The substitution effect was detected between OR and SR. However, the negative effect of the SR on economic activity deserves special attention by energy policymakers. This paper argues that the main challenge of renewable sources for policymakers is their cost-effectiveness. [ABSTRACT FROM AUTHOR]

The energy retrofitting of residential stock is not always straightforward where heritage protected housing is concerned. In southern Europe, many examples built under the Modern Movement codes are now obsolete in terms of energy efficiency. The aim of this paper is to assess the potential for improvement of comfort conditions and energy efficiency in Mediterranean heritage residential buildings, through the incorporation of passive strategies in keeping with preserving heritage values. Long-term monitoring and field tests in representative flats of the case-study building were carried out and, focusing on a single example, adaptive comfort equations were used to assess results. The passive strategies considered are the thermal isolation of the air cavities of walls, changing window frames, optimizing window glazing, and setting up regular mechanical ventilation rates for indoor air changes. Although simulation results generally predict a better energy performance after testing retrofit strategies, the potential decrease in energy demand is more noticeable than the potential improvement in comfort conditions. • The improvement of comfort and energy efficiency in a heritage building is assessed. • Long-term monitoring and field tests were carried out in representative flats. • Passive strategies in keeping with preserving heritage values were examined. • Adaptive comfort equations were used to assess results focusing on one flat. • Energy efficiency improvements are more noticeable than those of comfort conditions. [ABSTRACT FROM AUTHOR]

• Energy Communities analysis and review in Europe and, more specifically, in Spain. • Promoting energy poverty reduction and cooperation through Energy Communities. • Real case study focused on reducing energy poverty in the city of Getafe (Spain). • Selection of public buildings to implement energy community in two neighborhoods. • Significant electricity bill reductions for energy poverty households. Advancements in renewable energy technologies, a growing awareness of the need for sustainable energy solutions, and the emergence of new business models in the energy sector, have contributed to the growth of Energy Communities. Public entities can find in energy communities today an opportunity to tackle energy poverty, to increase the cooperation among citizens and to empower them to be a more active player within the energy sector. This paper analyzes energy communities in Europe and focuses specifically on Spain; considering the three beneficial aspects previously mentioned. It aims to obtain ground truth about the applications of these new citizens' arrangements. A citizen-led initiative at the city of Getafe (Madrid, Spain) is included and discussed in detail. This case study focused on reducing energy poverty of its participants. An energy community was designed and implemented as a collective PV solar self-consumption infrastructure. The roofs of various public buildings in the two case study neighborhoods were selected for locating the PV installations. Real metered data were used to evaluate the solution. A public building was selected for the energy community, considering generation on roof and dwellings proximity. The results provided that out of the 77% PV generations could be used to contribute to the demand of 100 residences; while the resulting 23% would provide approximately 60% of the energy demand of the public building. The setting up of the Energy Community not only had the technical part but also included workshops seminars and information sessions, to ensure that people prone to benefit and maximize its impact. [ABSTRACT FROM AUTHOR]

The low energy efficiency of the European building stock is both a social and environmental issue. However, plans and studies on energy retrofitting interventions do not usually evaluate the impact of these measures on households' energy affordability. This paper analyses and compares the effect of alternative retrofitting strategies on thermal energy services' affordability in Spanish vulnerable households. This analysis was carried out by applying the Required Thermal Energy Expenditure model proposed in previous studies to several 2030 residential building stock scenarios, setting 2020 as a baseline. Therefore, this work proposes a methodological approach to assess the impact of the considered energy efficiency interventions on energy poverty in winter (WEP) and summer (SEP) and carries out both a 'social cost' and a cost-benefit analysis. The dwelling's thermal-enclosure retrofitting stands out as a very WEP-reduction and social-cost effective measure. Instead, replacing old thermal systems with more efficient ones would have a higher impact on SEP. Combining both kinds of retrofitting measures could reduce heating and cooling required expenditures by, respectively, 49% and 59%, and decrease the WEP and SEP share, correspondingly, by 35% and 63%. These results might inform policymakers to enhance the targeting and design of energy efficiency programs. [ABSTRACT FROM AUTHOR]

• Advanced climate-resilient energy retrofit technology reduces the use of non-renewable energy in the building sector. • Renewable District Heating as an optimal technology in deep energy renovation strategies. • Sustainable cities and buildings are feasible by Centralised District Heating system powered by biomass. • Key Performance Indicators (KPIs), to achieve nZEB performances established in the European legislations. This paper presents the implementation of a biomass-fuelled District Heating System (DHS), as a part of a deep energy renovation exercise to achieve a climate-resilient campus with minimum carbon dioxide emissions. The case study is carried out for the University of Valladolid, an average-sized university in Spain, with a continental weather climate. Prior to renovation, the different building blocks had a wide-ranging level of fossil fuel consumption for space heating and domestic hot water ranging between 60 and 430 kWh/m2·year. The application of this centralised heating system allows to achieve the minimum threshold for near zero-energy buildings (nZEB) of 100–120 kWh/m2, in accordance with the Spanish Standards. These values correspond to the maximum European indicators for offices in continental weather conditions. Results of this comprehensive study show that 15 out of the 19 buildings reached the nZEB target, due to the proposed strategy. The overall carbon dioxide emissions have dropped by 92.69% as compared to the original fossil-fuel powered boiler, thus bringing carbon dioxide emissions down to 1.57 kgCO 2 /m2·y. Therefore, it is shown that deep energy renovation strategies through renewable energy DHS have the potential of achieving nZEB for universities in continental weather conditions. [ABSTRACT FROM AUTHOR]

Abstract: The most widespread support system for renewable-energy-sourced electricity (RES-E) is the feed-in tariff (FIT). FITs can be divided into fixed-FIT and premium systems. The latter type may also include a cap and floor option, turning it into a variable premium system. The cap value (upper limit) aims to avoid windfall profits for the RES-E investor if the electricity price rises quickly, while the floor value (lower limit) ensures minimum revenue, reducing the risk caused by low electricity prices. This paper examines the performance of the variable premium system as established in Spain (hourly-based) and investigates the possibility of alternative novel designs. For this purpose, an analysis was undertaken of the cap & floor system established in Spain based on real market data over a three year period and its performance compared to the fixed premium system (no cap & floor limitations) and two novel cap & floor designs (monthly- and yearly-based). Two other novel alternatives were also considered: daily- and weekly-based. It is shown that the hourly-based cap & floor system did not result in a reduction of the overall RES-E revenue compared to the fixed premium system over the three year period, though revenue was more evenly distributed from year-to-year. The paper concludes that variable premium systems should be based on monthly or yearly cap & floor mechanism as opposed to an hourly one. [Copyright &y& Elsevier]

This paper presents a study of the thermal performance of a single-family house located in a coastal city in northern Spain that was built according to Spanish standards during the 1990s. The study estimates an annual energy demand of around 95 kWh/m 2 and a thermal power rating of the heating system of around 16 kW. The potential energy savings that would be obtained by implementing different retrofitting measures frequently used nowadays are also quantified: installing a ventilation system with heat recovery, improving the insulation of opaque construction elements, replacing the existing windows with high-thermal performance windows, and reducing air infiltration rates. These integrated actions on the house would reduce the annual energy demand below the requirements of both the Technical Building Code (24.24 kWh/m 2 year for this case of study), which is the regulation currently in force in Spain, and the well-known Passivhaus standard (15 kWh/m 2 year), which is one of the most widespread building standards in Europe. Compliance with these requirements means that the annual energy demand and the size of the heating system would respectively be potentially reduced by 81% and 57% of the present values. [ABSTRACT FROM AUTHOR]

Generally, in most pressure irrigation systems and particularly in irrigation systems of golf courses, an efficient management of water and energy use is required. Through an efficient management of these resources the excessive consumptions are controlled and a savings in exploitation costs could be achieved. One of the tools that allow controlling and identifying the water and energy consumption is the use of management and automation indicators. With the employ of these tools, several parameters that affect in the efficiency of water and energy use of pumping systems, water network configuration, automation and the associated energy systems could be controlled. In this paper the methodology and implementation of several water, energy and automation indicators and their productivity adapted to four golf courses in south-east Spain are shown. For this purpose, some data of a developed study among 2008 and 2011 in the irrigation systems of these golf courses and their influence in the improvement of the efficiency in the water and energy use are presented. This combined methodology is particularly suitable for comparing the irrigation systems of several golf courses. Moreover, by using these indicators with automation and remote control devices for water and energy management in such irrigation systems, it is possible to reduce and control associated costs. The results demonstrate that automation is a low-cost investment (with a maximum of 2% of the total costs) compared to the large benefits and advantages. For this study, the maximum values of the automation cost per controlled water volume and energy were 0.2007 €·m −3 and 0.2233 €·kWh −1 , respectively. The percentage of automation cost in the total cost is around 1.5 percent. [ABSTRACT FROM AUTHOR]

This paper has two main aims: to offer an overview of Spain׳s strategy for fulfilling its Kyoto commitments and to analyze the main drivers that have influenced the recent trend in its greenhouse gas (GHG) emissions, with special emphasis on the Spanish power sector. First, the use of the Kyoto Flexibility Mechanisms in Spain and the role of the different subsectors of the country׳s economy in fulfilling the aforesaid commitment are explored, focusing on the sectors affected by the European Union Emission Trading Scheme (EU ETS). Then, based on the Stochastic Impacts by Regression on Population, Affluence, and Technology (STIRPAT) model and on the analysis of trends in Spain׳s primary and final energy intensity ratios, the main drivers in GHG emission trends are identified, with a distinction being drawn between “strategic” and “non-strategic” drivers. The results show that the trend in the level of the economy is the main “non-strategic” driver, while increased penetration of renewable energies in the Spanish power mix and improvements in final energy efficiency are the main “new-strategic” drivers which explain the downward trend observed in GHG emissions from 2006 onwards. However, changes in legislation introduced in 2012 are negatively affecting the new renewable installed power generation capacity: they seem to mean a step backward in the future Spanish strategy to reduce or limit GHG emissions. [ABSTRACT FROM AUTHOR]

Energy performance certificate databases are a key tool for mapping national building stock and thus fostering greater overall energy efficiency. This paper presents an insight into the energy performance of residential and tertiary sector buildings in Spain, through an analysis of the first 129,635 energy performance certificates issued for existing buildings, collected by the Catalan Institute of Energy. Most of the residential buildings or building units that were studied were “E” class (53.6%). Single-family houses were found to use more energy on average (248.0 kWh p /m 2 ) than individual dwellings (183.2 kWh p /m 2 ). Tertiary sector buildings were found to have slightly better energy performance (26.4% of buildings were rated “D class”), with an average energy consumption of 317.8 kWh p /m 2 . Modern buildings consume less energy, as they must meet the higher energy performance requirements stated in thermal building regulations. Residential buildings or building units located in hotter climate zones consume slightly less energy than those located in colder zones, mainly because heating accounts for a high percentage of overall energy expenditure (70–75% in residential buildings). A significant proportion of the energy consumed in tertiary sector buildings is for lighting (37.2%). This research defines the current energy consumption baseline of existing buildings in Spain. The results can help to prioritize energy conservation efforts according to building type, construction period, climate zone and specific end-uses. They may also help public authorities to plan future energy policies, and construction practitioners to identify market segments and business strategies. [ABSTRACT FROM AUTHOR]

This paper shows how exergy can be used to assess the mineral balance of a country and at the same time assess its mineral resource sustainability. The advantage of using such an approach is that the quality of the resources is taken into account, as opposed to the conventional procedure that uses tonnage as a yardstick. The exergoecology method evaluates mineral resources as the exergy required to replace them from a complete dispersed state to the conditions they were originally found with the best available technologies. The country chosen as a case study is Spain and serves as a representative example of the mineral situation in Europe. The general trend observed is that imports are increasing and domestic production is decreasing. The minerals with higher exergy replacement costs are mainly those imported, including fossil fuels and scarce minerals. In 2005, the domestic production of minerals was higher than the imports but since imports were mainly of scarce minerals, the exergy loss associated with such imports was higher compared to domestic production. As it happens to most European nations, Spain is a very dependent country regarding the supply of fossil fuels but not as much in the case of non-fuel minerals. [ABSTRACT FROM AUTHOR]

Due to climate change, energy dependence and other energy-related issues, most developed countries are attempting to reduce fossil-fuel use in the transport sector. Accordingly, there are several instruments that have been in place for many years, such as mandatory design standards, taxes on fuels, car purchase and ownership, and energy efficiency labels. Yet it is still not clear whether consumers value energy efficiency as a characteristic of vehicles. In this paper we use the European labelling system for light vehicles, which classifies automobiles according to their relative fuel consumption levels, as a novel, alternative indicator for energy efficiency. Moreover, we use a unique database that incorporates official commercial prices along with prices obtained through ‘mystery shopping’ at a selection of Spanish car retailers. We apply the hedonic price method to this database to estimate the price functions for vehicles and thereby obtain the marginal price of vehicles rated highly in terms of energy efficiency. Our results show that vehicles labelled A and B are sold at prices 3 to 5.9 percent higher than those with similar characteristics but lower energy-efficiency labels. [ABSTRACT FROM AUTHOR]

Abstract: An analysis of scientific publications on solar energy was conducted to determine whether public interest in the subject is mirrored by more intense research in the area. To this end, the research published by Spain and Germany, the two EU countries with the highest installed photovoltaic capacity, was analyzed based on Web of Science data. The results show that: solar output has risen substantially; solar research has a greater impact (measured in terms of citations) than publications on other renewables such as wind power; scientific production on solar energy is high in Germany and Spain, which together account for 51% of the total in the EU-27; the pattern of topics researched in the two countries is very similar; and their international collaboration is more intense than the world average and higher than in countries such as the USA, China or Japan. Collaboration between them is likewise intense. The main conclusion is the divergence in Germany and Spain between solar energy demand/output growth, being exponential, and the growth of research papers on the subject, which is linear. [Copyright &y& Elsevier]

'Energy efficiency first' is one of the key principles of the Energy Union, mainly due to it being the most cost effective way to reduce emissions, improving energy security, enhancing competitiveness and making energy consumption more affordable for all consumers. In light of the revised EU Energy Efficiency Directive, this paper discusses new developments brought by the EU together with the national case studies of Slovenia and Spain. Given that the paper has a specific focus on the industrial sector, it discusses the selected measures of the Energy Efficiency Directive, such as defined in Articles 7, 8, and 14, which are the most relevant to this sector. The paper also explores the newly issued integrated national energy and climate plans together with national measures and policies that support energy efficiency in industry, including the quantification of achieved and forecast energy savings in these two EU Member States. • The revised EU Energy Efficiency Directive is the key driver of change in Member States. • More ambitious energy efficiency targets are projected in Slovenia and Spain for 2030. • The integrated National Energy and Climate plans inspired further national developments. • Both countries committed to continue their national measures/schemes on energy efficiency. [ABSTRACT FROM AUTHOR]

Public Authorities are responsible for setting speed limits on roads. It is obvious that the modification of speed limits affect travel time. Also, there are many academic studies highlighting the relationship between vehicle speed and other particular isolated social costs, such as speed and accidents, speed and pollution or speed and fuel consumption. However, there are very few comprehensive studies on the subject of optimum speed limits. Furthermore, when Public Authorities modify speed limits usually they justify the measure to achieve a particular goal. The aim of this paper is to develop a comprehensive methodology that relies on cost-benefit analyses to determine the optimum speed limit for a particular road. The methodology is then applied to two recent case studies in Spain. In the first one, the Authorities decreased speed limits on national highways from 120 to 110 km per hour to save fuel. In the second case, the Authorities also reduced speed limits on the M − 30 ring road from 90 to 70 km per hour on specific days to reduce pollution. It seems that the Authorities might not always perform a technical analysis of these measures before implementing these policies. • Statutory speed limit changes by Public Authorities are usually justified by a particular goal, such as pollution or accident reduction. • Statutory speed limit changes affect other transportation costs, such as travel time. • It is possible to determine an optimum statutory speed limit that is comprehensive of all transportation costs. • In two case studies from Spain, statutory speed limit changes do not seem to be the result of a comprehensive technical analysis including the main transportation costs involved. [ABSTRACT FROM AUTHOR]

Olive sector residues could contribute to increased use of renewable energies, especially in those areas where the olive crop is produced. This paper determines the maximum amount of electrical and thermal energy which could be obtained in Andalusia from olive sector residues, and the economic value that could be obtained from these energy uses. For this, the current data on installed power and electrical and thermal generation are compared with the calculated potential data which would be obtained at full capacity. The results show there is a 69.23% wastage of olive sector residues for energy purposes. Thus, using the resources at full capacity, 3.9 million tons of biomass per year could be obtained for energy purposes. Currently, only 2 million tons of biomass are used for energy purposes. This wastage translates into a below potential generation of electrical and thermal energy. The full use of these residues would allow 83.9% and 64.9% higher generation of electrical and thermal energy, respectively. The results obtained also show that the economic value of olive sector biomass is higher than the market price value, with the average values for each use being 248.20 €/t for domestic thermal use, 165.04 €/t for electrical use and 139.50 €/t for industrial thermal use. Thus, it is considered feasible that the olive sector biomass could be used to a greater degree than at present. In this sense, it is recommended that more electricity generation plants and thermal-generating systems be put into operation. • There is a 69.2% wastage of olive sector residues that could be used for energy purposes. • The full use of olive by-products would account for 6.2% of renewable electricity. • The full use of olive by-products would account for 26.7% of thermal generation. • Better use of residues would promote the start-up of 55 and 1762 electricity and thermal plants, respectively. • The economic value of olive sector biomass allows the value chain to be covered. [ABSTRACT FROM AUTHOR]

Hot-dip galvanisation (HDG) is the method most commonly used to protect steel surfaces from corrosion. However, HDG involves very intensive consumption of energy and resources. This paper aims to evaluate the environmental performance and hotspots in the Spanish HDG sector using cradle-to-gate life cycle assessment (LCA). Two Spanish HDG industrial plants, with different galvanisation capacities and manufacturing processes, were selected for the case study. The LCA revealed that the consumption of energy, fuels and nonrenewable resources were the most relevant environmental burdens at both plants. Steel was the main contributor, as it had the greatest influence on the plants' environmental profiles. The consumption of primary zinc and natural gas, used to dry and heat the molten zinc bath, also contributed to the impact of the HDG plants. This work proposes a normalisation to compare the Spanish sector against a European reference based on the average of 66 companies in 14 countries. The impacts of the Spanish HDG plants being studied were generally below the EGGA values, although the results are strongly influenced by the type of steel and the degree of material reuse implemented in the steel manufacturing process. The study lays the foundations for improvements in the resource efficiency and productivity of galvanisation plants. We propose alternatives such as the use of secondary zinc or modifications that will extend the lifespan of pickling baths, which would contribute to a more sustainable use of resources in the galvanising industry. Image 1 • The hot-dip galvanisation (HDG) sector in Spain was assessed via LCA. • Two HDG plants with different production properties provided detailed data inventories. • The highest impacts were found in the production of steel and primary zinc. • Using secondary zinc and extending pickling bath's lifespan would improve HDG. • The impacts of the Spanish HDG plants were generally below the European average. [ABSTRACT FROM AUTHOR]

Given the climate change emergency, reducing energy consumption, which is responsible for most greenhouse gases emissions worldwide, is a priority. However, the strong historical link between energy consumption and economic growth questions whether continued economic growth is compatible with energy conservation targets. Conventional final energy analysis (common analysis methods applied at the final energy stage) has provided limited insights to this nexus. In response, this paper explores the extent to which useful stage analysis provides additional insights using three common methods: aggregate energy-economy analysis (growth rates, energy intensities, and Index Decomposition Analysis), energy-GDP causality testing, and Aggregate Production Function modelling, using Spain (1960–2016) as empirical case study. The results reveal that of the three methods investigated, aggregate energy-economy analysis provides the greatest insights, including that Spain is far from achieving absolute energy-GDP decoupling. Further, moving to the useful stage indicates that the extent of decoupling is even less than suggested at the final energy stage, and that increasing final energy consumption has historically fully offset efficiency gains. In contrast, whether applied at the final energy or useful stage, energy-GDP causality testing and Aggregate Production Function modelling reveal little about the energy-economy nexus — the results even suggest that these tools are not appropriate and may mislead. Thus, useful stage analysis is necessary but not sufficient for delivering further energy-economy insights; there is also a need for exploring alternative, reliable, energy-economy analysis methods. Indeed, the lack of robustness of Aggregate Production Function modelling and energy-GDP causality testing is worrisome. • Final energy analysis has delivered limited insights to the energy-economy nexus. • Three common analysis methods are assessed at both final and useful energy stages. • Aggregate energy-economy analysis yields additional benefits at the useful stage. • Energy-GDP causality testing and Aggregate Production Functions lack insights at both energy stages. • A move to alternative, useful stage energy-economy analytical methods is required. [ABSTRACT FROM AUTHOR]

• A methodology to assess energy flexibility of building clusters in a GIS framework. • Building clusters become energy prosumer by deep renovation and renewable energies. • It aims to integrate a wider spatial decision tool for environmental public policy. • Comfort thermal indexes quantify energy flexibility to measure peak load reduction. • Cluster design approach may help reduce investment costs and reach cost optimality. Natural resource depletion, global warming and pollution pose substantial threats in prioritizing environmental policy, both for private organizations and for governments. Half the EU building stock is prior to energy efficiency standards, thus making it an urgent challenge for the EU to aim at decarbonized cities by 2050. Urban energy retrofitting at cluster level represents a major opportunity, as its current rate is lower than an annual 1%, 3% being the EU desirable rate. This paper presents a bottom-up methodology to assess energy flexibility of building clusters within a Geographic Information System (GIS) framework, applied on a district scale. Energy performance certificates and GIS-based data permit diagnosis and neighborhood selection. The methodology evaluates building cluster energy flexibility via energy demand reduction and PV production. The results show the building cluster hourly load profile for heating and cooling, and thermal comfort indexes. It is expected that this GIS-based methodology will become part of a wider spatial decision support tool for environmental public policies contributing to building stock transformation, from energy consumer to prosumer through deep renovation and renewable energy use. Finally, this methodology is adaptable to other climates, particularly within Spain. [ABSTRACT FROM AUTHOR]