Search

The second most significant detection of the Planck Sunyaev-Zel'dovich survey, PLCK G287.0+32.9 (z = 0.385), boasts two similarly bright radio relics and a radio halo. One radio relic is located NW of the X-ray peak and the other Mpc to the SE. This large difference suggests that a complex merging scenario is required. A key missing puzzle for the merging scenario reconstruction is the underlying dark matter distribution in high resolution. We present a joint Subaru Telescope and Hubble Space Telescope weak-lensing analysis of the cluster. Our analysis shows that the mass distribution features four significant substructures. Of the substructures, a primary cluster of mass M200c = 1.59+0.25-0.22 ×1015 h-170 Mo dominates the weak-lensing signal. This cluster is likely to be undergoing a merger with one (or more) subcluster whose mass is approximately a factor of 10 lower. One candidate is the subcluster of mass M200c =1.16 0.15-0.13 ×1014h-170 Molocated ∼ 400 kpc to the SE. The location of this subcluster suggests that its interaction with the primary cluster could be the source of the NW radio relic. Another subcluster is detected ∼2 Mpc to the SE of the X-ray peak with mass M200c = 1.68 +0.22-0.20 ×1014h-170 Mo. This SE subcluster is in the vicinity of the SE radio relic and may have created the SE radio relic during a past merger with the primary cluster. The fourth subcluster, M200c = 1.87 +0.24-0.22×1014h-170 Mo, is NW of the X-ray peak and beyond the NW radio relic.

We present the integrated three-point shear correlation function i ζ± – a higher order statistic of the cosmic shear field – which can be directly estimated in wide-area weak lensing surveys without measuring the full three-point shear correlation function, making this a practical and complementary tool to two-point statistics for weak lensing cosmology. We define it as the one-point aperture mass statistic M ap measured at different locations on the shear field correlated with the corresponding local two-point shear correlation function ξ±. Building upon existing work on the integrated bispectrum of the weak lensing convergence field, we present a theoretical framework for computing the integrated three-point function in real space for any projected field within the flat-sky approximation and apply it to cosmic shear. Using analytical formulae for the non-linear matter power spectrum and bispectrum, we model i ζ± and validate it on N -body simulations within the uncertainties expected from the sixth year cosmic shear data of the Dark Energy Survey. We also explore the Fisher information content of i ζ± and perform a joint analysis with ξ± for two tomographic source redshift bins with realistic shape noise to analyse its power in constraining cosmological parameters. We find that the joint analysis of ξ± and i ζ± has the potential to considerably improve parameter constraints from ξ± alone, and can be particularly useful in improving the figure of merit of the dynamical dark energy equation of state parameters from cosmic shear data. [ABSTRACT FROM AUTHOR]

We present stellar-dynamical measurements of the central supermassive black hole (SMBH) in the S0 galaxy NGC 307, using adaptive-optics IFU data from VLT-SINFONI. We investigate the effects of including dark-matter haloes as well as multiple stellar components with different mass-to-light (M/L) ratios in the dynamical modelling. Models with no halo and a single stellar component yield a relatively poor fit with a low value for the SMBH mass [(7.0±1.0)×107M⊙] and a high stellarM/L ratio (ϒK =1.3±0.1). Adding a halo produces a much better fit, with a significantly larger SMBH mass [(2.0 ± 0.5) × 108M⊙] and a lower M/L ratio (ϒK = 1.1 ± 0.1). A model with no halo but with separate bulge and disc components produces a similarly good fit, with a slightly larger SMBH mass [(3.0 ± 0.5) × 108M⊙] and an identical M/L ratio for the bulge component, though the disc M/L ratio is biased high (ϒK, disc = 1.9 ± 0.1). Adding a halo to the two-stellar-component model results in a much more plausible disc M/L ratio of 1.0 ± 0.1, but has only a modest effect on the SMBH mass [(2.2 ± 0.6) × 108M⊙] and leaves the bulge M/L ratio unchanged. This suggests that measuring SMBH masses in disc galaxies using just a single stellar component and no halo has the same drawbacks as it does for elliptical galaxies, but also that reasonably accurate SMBH masses and bulge M/L ratios can be recovered (without the added computational expense of modelling haloes) by using separate bulge and disc components. [ABSTRACT FROM AUTHOR]

Photometric redshift uncertainties are a major source of systematic error for ongoing and future photometric surveys. We study different sources of redshift error caused by choosing a suboptimal redshift histogram bin width and propose methods to resolve them. The selection of a too large bin width is shown to oversmooth small-scale structure of the radial distribution of galaxies. This systematic error can significantly shift cosmological parameter constraints by up to 6σ for the dark energy equation-of-state parameter w. Careful selection of bin width can reduce this systematic by a factor of up to 6 as compared with commonly used current binning approaches. We further discuss a generalized resampling method that can correct systematic and statistical errors in cosmological parameter constraints caused by uncertainties in the redshift distribution. This can be achieved without any prior assumptions about the shape of the distribution or the form of the redshift error. Our methodology allows photometric surveys to obtain unbiased cosmological parameter constraints using a minimum number of spectroscopic calibration data. For a DES-like galaxy clustering forecast, we obtain unbiased results with respect to errors caused by suboptimal histogram bin width selection, using only 5k representative spectroscopic calibration objects per tomographic redshift bin. [ABSTRACT FROM AUTHOR]

We present an analysis of a general machine learning technique called 'stacking' for the estimation of photometric redshifts. Stacking techniques can feed the photometric redshift estimate, as output by a base algorithm, back into the same algorithm as an additional input feature in a subsequent learning round. We show how all tested base algorithms benefit from at least one additional stacking round (or layer). To demonstrate the benefit of stacking, we apply the method to both unsupervised machine learning techniques based on self-organizing maps (SOMs), and supervised machine learning methods based on decision trees. We explore a range of stacking architectures, such as the number of layers and the number of base learners per layer. Finally we explore the effectiveness of stacking even when using a successful algorithm such as AdaBoost. We observe a significant improvement of between 1.9 per cent and 21 per cent on all computed metrics when stacking is applied to weak learners (such as SOMs and decision trees). When applied to strong learning algorithms (such as AdaBoost) the ratio of improvement shrinks, but still remains positive and is between 0.4 per cent and 2.5 per cent for the explored metrics and comes at almost no additional computational cost. [ABSTRACT FROM AUTHOR]

We showcase machine learning (ML) inspired target selection algorithms to determine which of all potential targets should be selected first for spectroscopic follow-up. Efficient target selection can improve the ML redshift uncertainties as calculated on an independent sample, while requiring less targets to be observed. We compare seven different ML targeting algorithms with the Sloan Digital Sky Survey (SDSS) target order, and with a random targeting algorithm. The ML inspired algorithms are constructed iteratively by estimating which of the remaining target galaxies will be most difficult for the ML methods to accurately estimate redshifts using the previously observed data. This is performed by predicting the expected redshift error and redshift offset (or bias) of all of the remaining target galaxies. We find that the predicted values of bias and error are accurate to better than 10-30 per cent of the true values, even with only limited training sample sizes. We construct a hypothetical follow-up survey and find that some of the ML targeting algorithms are able to obtain the same redshift predictive power with 2-3 times less observing time, as compared to that of the SDSS, or random, target selection algorithms. The reduction in the required follow-up resources could allow for a change to the follow-up strategy, for example by obtaining deeper spectroscopy, which could improve ML redshift estimates for deeper test data. [ABSTRACT FROM AUTHOR]

We introduce an ordinal classification algorithm for photometric redshift estimation, which significantly improves the reconstruction of photometric redshift probability density functions (PDFs) for individual galaxies and galaxy samples. As a use case we apply our method to CFHTLS galaxies. The ordinal classification algorithm treats distinct redshift bins as ordered values, which improves the quality of photometric redshift PDFs, compared with non-ordinal classification architectures. We also propose a new single value point estimate of the galaxy redshift, which can be used to estimate the full redshift PDF of a galaxy sample. This method is competitive in terms of accuracy with contemporary algorithms, which stack the full redshift PDFs of all galaxies in the sample, but requires orders of magnitude less storage space. The methods described in this paper greatly improve the log-likelihood of individual object redshift PDFs, when compared with a popular neural network code (ANNZ). In our use case, this improvement reaches 50 percent for high-redshift objects (z ≥ 0.75). We show that using these more accurate photometric redshift PDFs will lead to a reduction in the systematic biases by up to a factor of 4, when compared with less accurate PDFs obtained from commonly used methods. The cosmological analyses we examine and find improvement upon are the following: gravitational lensing cluster mass estimates, modelling of angular correlation functions and modelling of cosmic shear correlation functions. [ABSTRACT FROM AUTHOR]

We present an analysis of anomaly detection for machine learning redshift estimation. Anomaly detection allows the removal of poor training examples, which can adversely influence redshift estimates. Anomalous training examples may be photometric galaxies with incorrect spectroscopic redshifts, or galaxies with one or more poorly measured photometric quantity. We select 2.5 million 'clean' SDSS DR12 galaxies with reliable spectroscopic redshifts, and 6730 'anomalous' galaxies with spectroscopic redshift measurements which are flagged as unreliable. We contaminate the clean base galaxy sample with galaxies with unreliable redshifts and attempt to recover the contaminating galaxies using the Elliptical Envelope technique. We then train four machine learning architectures for redshift analysis on both the contaminated sample and on the preprocessed 'anomaly-removed' sample and measure redshift statistics on a clean validation sample generated without any preprocessing. We find an improvement on all measured statistics of up to 80 percent when training on the anomaly removed sample as compared with training on the contaminated sample for each of the machine learning routines explored. We further describe a method to estimate the contamination fraction of a base data sample. [ABSTRACT FROM AUTHOR]

We present analyses of data augmentation for machine learning redshift estimation. Data augmentation makes a training sample more closely resemble a test sample, if the two base samples differ, in order to improve measured statistics of the test sample.We perform two sets of analyses by selecting 800 000 (1.7 million) Sloan Digital Sky Survey Data Release 8 (Data Release 10) galaxies with spectroscopic redshifts.We construct a base training set by imposing an artificial r-band apparent magnitude cut to select only bright galaxies and then augment this base training set by using simulations and by applying the K-CORRECT package to artificially place training set galaxies at a higher redshift. We obtain redshift estimates for the remaining faint galaxy sample, which are not used during training.We find that data augmentation reduces the error on the recovered redshifts by 40 per cent in both sets of analyses, when compared to the difference in error between the ideal case and the non-augmented case. The outlier fraction is also reduced by at least 10 per cent and up to 80 per cent using data augmentation.We finally quantify how the recovered redshifts degrade as one probes to deeper magnitudes past the artificial magnitude limit of the bright training sample.We find that at all apparent magnitudes explored, the use of data augmentation with tree-based methods provide an estimate of the galaxy redshift with a low value of bias, although the error on the recovered redshifts increases as we probe to deeper magnitudes. These results have applications for surveys which have a spectroscopic training set which forms a biased sample of all photometric galaxies, for example if the spectroscopic detection magnitude limit is shallower than the photometric limit. [ABSTRACT FROM AUTHOR]

We present an analysis of importance feature selection applied to photometric redshift estimation using the machine learning architecture Decision Trees with the ensemble learning routine ADABOOST (hereafter RDF). We select a list of 85 easily measured (or derived) photometric quantities (or 'features') and spectroscopic redshifts for almost two million galaxies from the Sloan Digital Sky Survey Data Release 10. After identifying which features have the most predictive power, we use standard artificial Neural Networks (aNNs) to show that the addition of these features, in combination with the standard magnitudes and colours, improves the machine learning redshift estimate by 18 percent and decreases the catastrophic outlier rate by 32 percent. We further compare the redshift estimate using RDF with those from two different aNNs, and with photometric redshifts available from the Sloan Digital Sky Survey (SDSS). We find that the RDF requires orders of magnitude less computation time than the aNNs to obtain a machine learning redshift while reducing both the catastrophic outlier rate by up to 43 percent, and the redshift error by up to 25 percent. When compared to the SDSS photometric redshifts, the RDF machine learning redshifts both decreases the standard deviation of residuals scaled by 1/(1+z) by 36?per?cent from 0.066 to 0.041, and decreases the fraction of catastrophic outliers by 57?per?cent from 2.32 to 0.99?per?cent. [ABSTRACT FROM AUTHOR]

In this work, we analyze the mass distribution of MACSJ1206.2-0847, particularly focusing on the halo properties of its cluster members. The cluster appears relaxed in its X-ray emission, but has a significant amount of intracluster light that is not centrally concentrated, suggesting that galaxy-scale interactions are still ongoing despite the overall relaxed state. The cluster lenses 12 background galaxies into multiple images and one galaxy at z = 1.033 into a giant arc and its counterimage. The multiple image positions and the surface brightness (SFB) distribution of the arc, which is bent around several cluster members, are sensitive to the cluster galaxy halo properties. We model the cluster mass distribution with a Navarro-Frenk-White profile and the galaxy halos with two parameters for the mass normalization and the extent of a reference halo assuming scalings with their observed near-infrared light. We match the multiple image positions at an rms level of 0. ''85 and can reconstruct the SFB distribution of the arc in several filters to a remarkable accuracy based on this cluster model. The length scale where the enclosed galaxy halo mass is best constrained is about 5 effective radii-a scale in between those accessible to dynamical and field strong-lensing mass estimates on the one hand and galaxy-galaxy weak-lensing results on the other hand. The velocity dispersion and halo size of a galaxy with m160W,AB = 19.2 and MB,Vega = -20.7 are σ = 150 km s-1 and r ≈ 26±6 kpc, respectively, indicating that the halos of the cluster galaxies are tidally stripped.We also reconstruct the unlensed source, which is smaller by a factor of ~5.8 in area, demonstrating the increase in morphological information due to lensing. We conclude that this galaxy likely has star-forming spiral arms with a red (older) central component. [ABSTRACT FROM AUTHOR]

ABSTRACT We study the Sloan Lens ACS (SLACS) survey strong-lensing system SDSS J1430+4105 at zl = 0.285. The lensed source ( zs = 0.575) of this system has a complex morphology with several subcomponents. Its subcomponents span a radial range from 4 to 10 kpc in the plane of the lens. Therefore, we can constrain the slope of the total projected mass profile around the Einstein radius from lensing alone. We measure a density profile that is slightly but not significantly shallower than isothermal at the Einstein radius. We decompose the mass of the lensing galaxy into a de Vaucouleurs component to trace the stars and an additional dark component. The spread of multiple-image components over a large radial range also allows us to determine the amplitude of the de Vaucouleurs and dark matter components separately. We get a mass-to-light ratio of [ABSTRACT FROM AUTHOR]

We present a catalog of 25 definite and 11 probable strong galaxy-galaxy gravitational lens systems with lens redshifts 0.4 ≲ z ≲ 0.7, discovered spectroscopically by the presence of higher-redshift emission lines within the Baryon Oscillation Spectroscopic Survey (BOSS) of luminous galaxies, and confirmed with high-resolution Hubble Space Telescope (HST) images of 44 candidates. Our survey extends the methodology of the Sloan Lens Advanced Camera for Surveys survey (SLACS) to higher redshift. We describe the details of the BOSS spectroscopic candidate detections, our HST ACS image processing and analysis methods, and our strong gravitational lens modeling procedure. We report BOSS spectroscopic parameters and ACS photometric parameters for all candidates, and mass-distribution parameters for the best-fit singular isothermal ellipsoid models of definite lenses. Our sample to date was selected using only the first six months of BOSS survey-quality spectroscopic data. The full five-year BOSS database should produce a sample of several hundred strong galaxy-galaxy lenses and in combination with SLACS lenses at lower redshift, strongly constrain the redshift evolution of the structure of elliptical, bulge-dominated galaxies as a function of luminosity, stellar mass, and rest-frame color, thereby providing a powerful test for competing theories of galaxy formation and evolution. [ABSTRACT FROM AUTHOR]

Highly magnified lensed galaxies allow us to probe the morphological and spectroscopic properties of high-redshift stellar systems in great detail. However, such objects are rare, and there are only a handful of lensed galaxies that are bright enough for a high-resolution spectroscopic study with current instrumentation. We report the discovery of a new massive lensing cluster, SDSS J120923.7+264047, at z= 0.558. Present around the cluster core, at angular distances of up to ∼40 arcsec, are many arcs and arc candidates, presumably due to lensing of background galaxies by the cluster gravitational potential. One of the arcs, 21 arcsec long, has an r-band magnitude of 20, making it one of the brightest known lensed galaxies. We obtained a low-resolution spectrum of this galaxy, using the Keck-I telescope, and found it is at redshift of z= 1.018. [ABSTRACT FROM AUTHOR]

We present the largest M31 near-infrared (F110W (close to J band), F160W (H band)) Cepheid sample so far. The sample consists of 371 Cepheids with photometry obtained from the Hubble Space Telescope PHAT program. The sample of 319 fundamental mode Cepheids, 16 first overtone Cepheids, and 36 type II Cepheids was identified using the median absolute deviation outlier rejection method we develop here. This method does not rely on priors and allows us to obtain this clean Cepheid sample without rejecting a large fraction of Cepheids. The obtained period-luminosity relations (PLRs) have a very small dispersion, i.e., 0.155 mag in F160W, despite using random phased observations. This remarkably small dispersion allows us to determine that the PLRs are significantly better described by a broken slope at 10 days than a linear slope. The use of our sample as an anchor to determine the Hubble constant gives a 3.2% larger Hubble constant compared to the Riess et al. sample. [ABSTRACT FROM AUTHOR]

We present a joint shear-and-magnification weak-lensing analysis of a sample of 16 X-ray-regular and 4 high-magnification galaxy clusters at 0.19 ≲ z ≲ 0.69 selected from the Cluster Lensing And Supernova survey with Hubble (CLASH). Our analysis uses wide-field multi-color imaging, taken primarily with Suprime-Cam on the Subaru Telescope. From a stacked-shear-only analysis of the X-ray-selected subsample, we detect the ensemble-averaged lensing signal with a total signal-to-noise ratio of ≃ 25 in the radial range of 200-3500 kpc h–1, providing integrated constraints on the halo profile shape and concentration-mass relation. The stacked tangential-shear signal is well described by a family of standard density profiles predicted for dark-matter-dominated halos in gravitational equilibrium, namely, the Navarro-Frenk-White (NFW), truncated variants of NFW, and Einasto models. For the NFW model, we measure a mean concentration of at an effective halo mass of . We show that this is in excellent agreement with Λ cold dark matter (ΛCDM) predictions when the CLASH X-ray selection function and projection effects are taken into account. The best-fit Einasto shape parameter is , which is consistent with the NFW-equivalent Einasto parameter of ∼0.18. We reconstruct projected mass density profiles of all CLASH clusters from a joint likelihood analysis of shear-and-magnification data and measure cluster masses at several characteristic radii assuming an NFW density profile. We also derive an ensemble-averaged total projected mass profile of the X-ray-selected subsample by stacking their individual mass profiles. The stacked total mass profile, constrained by the shear+magnification data, is shown to be consistent with our shear-based halo-model predictions, including the effects of surrounding large-scale structure as a two-halo term, establishing further consistency in the context of the ΛCDM model. [ABSTRACT FROM AUTHOR]